CAR DVD/VCD/CD/MP3/MP4 PLAYER
English Version
00
Contents
Additional Information
Simple Troubleshooting Guide
The following checklist might help to solve the problems which you meet when using
the unit. Please double check and make sure if the connection and the procedure of
the operation is properly before using the checklist .below
07
1
Before You Start
Important Safeguards 4
About this manual 4
Precautions 5
Maintenance 6
Location & function of the controls 7
Remote control 8
Specifications 10
Installation
Wiring Connections
Installation
Detach the Unit
12
11
13
Common Operations
Reset the Unit
Turning the Unit On/Off
Volume Control
Eject a Disc
Infrared Sensor
14
14
14
14
18
DVD
Basic Operation of DVD
Playing Track F.F/F.REW 15
Number Buttons 15
Repeat Playing 15
Number Buttons 15
Stop the Playback
Pause the Playback
Playing the Previous/Next Track
System Button 16
Slow Motion Playback 16
Increase Picture Size 16
On Screen Display 16
Changing the Angle of View 16
Changing Audio Language 17
Changing the Subtitle Language 17
Selecting Different Menu/Title 17
Set Up Menu 17
15
15
15
15
Problem
No power.
Some errors occur in
LCD or no function
pressing the button.
Unable to receive stations.
Poor effect on receiving a
station.
CDs cannot be loaded.
Sound skips.
No images.
Images skip.
the
when
Cause/Solution
.
Check and make sure whether the fuse is blown,
replace with the proper value if necessary.
.
Press RESET button.
.
Check and make sure whether the antenna is
inserted or the antenna is properly connected, if
not, insert the antenna or connect it properly.
.
Antenna may not be the proper length. Make sure
the antenna is fully extended; if broken, replace
the antenna with a new one.
.
The antenna is poorly grounded, check and make
sure the antenna is properly grounded at its
mounting location.
.
A CD is loaded in the mechanism.
.
The CD is dirty or damaged.
.
The Video line from main unit to the TV is not
connected properly.
.
Improper setting of the color system. Set the color
system according to the
to PAL or NTSC
connected television.
Note:
If any of the problem persist after check list had been made, consult your nearest service dealer. Never
attempt to disassemble your unit by yourself.
Due to continuous product improvement, the operations are subject to run the model.
2
27
06
MP4
Contents
00
Basic operation of Mp4
Insert a MP4 disc into the slot, the unit will
automatically switch on.
Note:
You can press button on the base to eject
*
the Mp4 disc.
Playing the Previous/Next Track
8
Press to play the previous track, press
to play the next track.
9
Note:
* Pressing PREV and NEXT button on the head
unit also the same operation.perform
Number Buttons
You any tracks directly by
can select using
14
Number Buttons
( 0~9). The track
you selected will be played automatically.
Note:
* This function is operated by using remote
control only.
Playing Track F.F/F.REW
Press or to play the track fast for-
11
ward or fast rewind: each pressing, the change
is as following:
2X 4X 8X 16X
Note:
* This function is operated by using the remote
control only.
10
Repeat Playing
3
press REPEAT to activate the repeat
function, press it again to cancel this function.
Note:
* This function is operated by using remote
control.
* The default setting is DISC REPEAT.
26
the
Stop the playback
During MP4 playback, firstly press to
pause playing, then press to play from
5
the beginning of the disc, During stop status,
press pause to resume playing state.
Note:
Press STOP on the head unit also performs
*
the same operation.
4
Pause the Playback
5
During playback, press
button to
suspend the playback, Press it again to
return to normal playback.
Note:
* This function is operated by using remote
control only.
On-screen display
During Mp4 playback, press DISPLAY,
the monitor shows:
Single elapsed time
Note:
* This function is operated by using remote
control.
12
Single remain time
OFF
the
Changing audio language
(Multi-audio)
MP4s can provide audio playback with
different languages. With s featuring
multi-audio recordings, you can press
L/R to switch between language and audio
systems during playback.
Selection options switch as follows:
AUDIO 1 AUDIO 2 AUDIO 3
Note:
* This function is operated by using remote
control.
* This function is only operated by MP4s with
multi-audio recordings.
* The number in the mark on aMP4 s
package indicates the number of recorded
languages/audio systems.
MP4
18
the
2
5
VCD/CD/MP3
Basic Operation of Discs
Playing the Previous/Next Track
Playing the Track F.F/F.REW
Repeat Playing 24
Stop the Playback
Pause the Playback
System Button
Slow Motion Playback
Increase the size of image 25
On-Screen Display
Number Buttons 25
MO/ST Selector 25
Playing PBC (menu) 25
6
MP4
Playing a Mp4 26
Number Buttons 26
Playing Track F.F/F.REW 26
Repeat Playing 26
Stop Playing 26
Pause playing 26
On-screen display 26
7
Additional Information
Simple Troubleshooting Guide 27
25
24
24
24
24
24
25
25
26Changing the Angle of View
3
Before You Start
VCD/CD/MP3
05
IMPORTANT SAFEGUARDS
1. Be sure to connect the color coded
leads according to the diagram.
Incorrect connections may cause
the unit to malfunction or damage
the vehicle s electrical system.
2. Be sure to connect the speaker (-)
leads to the speaker (-) terminal.
Never connect the left and right
channel speaker cables each other
or to the vehicle body.
3. Make sure all the connections are
completely correct before turning
on your unit.
4. When replacing the fuse(s), the re placement must be of the same am perage as shown on the fuse holder.
5. Do not block vents or radiator pa nels. Blocking them will cause heat
to build up inside and may result in
fire.
6. After completing the installation and
beginning to play the unit(including
replacing the battery), please remove
the front panel at first, and then press
RESET button on the base with
pointed object (such as ball-point
pen) to set the unit to initial status.
,
About this manual
This unit features a number of sophisticated functions ensuring superior
operation. All the functions have been
designed for the easiest possible use,
but many are not self-explanatory. This
manual will help you understand the
functions and operations of the unit.
This manual main explains remote
control operation. However, in
addition to those functions related with
DVD/VCD/CD/MP3 etc. operation that
can only be operated by the remote control, there are also functions can be
operated by the buttons provided for the
main unit.
System Button
During VCD playback status,
7
SHIFT, then press P/N button
the standard to , NTSC or
TV AUTO PAL
system.
Note:
This function is operated by using remote
*
control.
18
firstly press
to set
the
Slow motion playback
During VCD mode, firstly press SHIFT
then press SLOW to slow forward or
9
slow backward. There are such speeds as
follows:
1/ 2 1/ 4
Note:
* This function is operated by using remote
control.
7
1/8
the
Increase the size of the picture
During VCD mode, firstly press SHIFT,
then press ZOOM button to increase the
8
picture size, shows as following:
2X 3X 4X
Note:
* This function is operated by using remote
control.
* Perform this function with the button.
7
the
6
On-screen display
During VCD/CD playback, press DISPLAY, the monitor shows:
Single elapsed time
OFF
Note:
* This function is operated by using remote
control.
Total
remain time
Single remain time
12
Total
elapsed time
the
Number Buttons
During playback status, you any
track directly by
ttons
( 0~9). For example, if you need
using Number Bu-
the 15th track, you can firstly press Button
10+, and then press Button 5, the corresponding track (15th) will be played.
Note:
* This function is operated by using remote
control only.
* The continuously pressing should be within
every 3 seconds.
can select
14
MO/ST Selector
During VCD playing, repeatedly press
L/R button to select the mode as bellow:
Mono left
Note:
This function is operated by using the remote
*
control.
Stereo
18
Mono right
Playing PBC (Menu)
14
16
17
25
During VCD status, firstly pressing
TITLE, PBC playback starts and the menu
of entire disc appears on the monitor. And
then you can select your favorite track by
using Number Buttons . When a track is
playing, you can button
to return if you would like to end
press MENU
the menu
the track and select others. To cancel PBC
17
playing,press button again.
Note:
This function is operated by using the remote
*
control.
PBC playing confirms to version 2.0 of SVCD/
*
VCD disc only.
TITLE
05
VCD/CD/MP3
Before You Start
01
Basic operation of Discs
Playing VCD/CD/MP3 Insert a disc
into the slot, the unit will automatically switch on.
Note:
* Pressing button on the head unit also can
eject a disc.
Playing the Previous/Next Track
During Mp3 playback, press to play
the previous track, press to play the
next track.
During VCD/CD playback, firstly pressing
8
to replay the current track, press
within 3 seconds to play the previous track,
9
press to play the next track.
Note:
* Pressing PREV and NEXT button on the head
unit also the same operation.perform
8
9
Playing Track F.F/F.REW
Press or to play the track fast forward
10
or fast backward: each pressing, the change is
as following:
2X
4X 8X 16X
Note:
* This function is operated by using the remote
control only.
Repeat Playing
During playback , press
replay the current track. Press it again to
cancel this function.
Note:
This function is operated by using the remote
*
control only.
The default setting is Disc Repeat.
*
3
REPEAT to
Stop the playback
During MP3 mode, press to pause
playing, press it again to play the current track.
During VCD/CD mode, firstly pressing to
pause playing, press to play, press
button twice to stop playing completely, press
PLAY button to start playing.
Note:
* Pressing STOP on the head unit also performs
the same function.
4
5
Pause the Playback
During playback, press
5
button to
suspend the playback, Press it again to
return to normal playback.
Note:
* Pressing PLAY on the head unit also performs
the same function.
PRECAUTIONS
This unit can play the following discs only:
Type of disc
DVD
VCD
CD
MP3
MPEG-4
NOTE: The unit is compatible with VCD1.0/2.0/3.0 version and DVCD disc.
Do not attempt to modify the unit,
modifying the unit may cause an
accident.
Stop the vehicle before carrying
out any operation that could
interfere with your driving.
Do not work in extremely high
or low temperature. Be sure the
temperature inside the vehicle is
between +60 C and -10 C
before turning on your unit.
To enjoy optimum sound and
images while playing, handle the
discs as follows:
Handle the disc by its edge to keep
the disc clean, and do not touch
the surface.
Label on the disc Recorded material
Sound and moving
pictures
Sound and moving
pictures
Sound only
Sound only
Sound and moving
MPEG-4
pictures
Do not use your CDs with paste residue
or ink attached.
Do not use CDs with labels or stickers
attached, which may leave a sticky residue
while beginning to peel off.
(Shown as the picture)
00
Clean the discs with an optional cleaning cloth. Wipe each disc from the center out.
(Shown as the picture)
Size of disc
24
5
Before You Start
DVD
04
Maintenance
Replacing the Fuse
Make sure the amperage matches the
specified value when replacing the fuses. If the fuse is blown, check the power connection and replace with a new one. If the same problem occurs,
it would be subjected to the malfunction. In such cases, please consult
to the nearest service dealer.
!
Warning
Never use the fuse with the rated
amperage more than that supplied to
your unit, otherwise it will damage the
unit.
Replacing the Battery
When the range of the operation of the
card remote control becomes short or no
functions while operating. Replace the
lithium battery with a new button cell
(CR2025). Make sure the battery polarity
before replace.
Insert the Battery Holder into the Remote
Control.
Precautions on Using Lithium
Battery
Always keep the lithium battery beyond
children s reach. In case
swallowed, see a doctor immediately.
Cleaning the battery with a dry cloth,
to ensure its perfect connected.
Make sure the proper polarity when
loading with the battery.
To prevent short circuit, do not use
metal tweezer to clip the battery.
---Password Setup page---
Password Mode
(Press
--Password Setup Page--
Password Mode
Password
Go To Password Setup Page
Password
(Press
Password Mode
Password
Go To Password Setup Page
Example showing how to set password mode:
On
Example showing how to change the password: The default password is 8888.
On
(Press , or , then press ENTER)
--Password Setup Page--
On
Password Mode
Password
Password Mode
(Press , or , then press ENTER)
--Password Setup Page----Password Setup Page--
Password Mode
Password
Change Password
On
Off
On
Change
Gently pull out the Battery Holder while
pressing the Stopper.
Put the button-type battery with mark(+)
upward into the Battery Holder.
6
!
Warning!
Improper handle with the battery may
lead to explosion.
It cannot be charged , disassembled or
thrown into a fire.
23
04
DVD
Before You Start
01
---Preferences page--
Default
(Press
TV Type
Audio
Subtitle
Disc Menu
Region
Parental
Default
Go To Preference Page
Example showing how to set load factory setting:
--Preference Page--
Auto
Eng
Eng
Eng
USA
(Press , or , then press ENTER)
--Preference Page--
TV Type
Audio
Subtitle
Disc Menu
Region
Parental
Default
Load Factory Setting
Auto
Eng
Eng
Eng
USA
Reset
Location of the Controls
Front Panel
6
1
POWER
7
5
Press to turn on or turn off the unit.
3
9
2
5
4
EJECT
8
1
Press to eject the disc.
22
2
PLAY/PAUSE
Press to switch sequentially between
playback and pause; during stop mode, you can also press to resume to
playback.
3
PR VE
Press to play the previous track.
4
NEXT
Press to play the next track.
6
STOP
Press to stop the playback.
7
RESET
Press to set the unit to initial status.
8
REMOTE
Remote control receptor.
9
DISC LOADING SLOT
7
Before You Start
DVD
04
Card Remote Control
1
2
3
4
5
6
7
8
17
9
10
16
15
14
18
13
12
11
---Preferences page--
Disc Menu
(Press
TV Type
Audio
Subtitle
Disc Menu
Region
Parental
Default
Go To Preference Page
Region
(Press
TV Type
Audio
Subtitle
Disc Menu
Region
Parental
Default
Go To Preference Page
Example showing how to set Disc Menu Language:
--Preference Page--
Auto
Eng
Eng
Eng
USA
Example showing how to set region:
--Preference Page--
Auto
Eng
Eng
Eng
USA
(Press , or , then press ENTER)
--Preference Page--
G
TV Type
Audio
Subtitle
Disc Menu
Region
Parental
Default
Preferred Menu Language
Auto
Eng
Eng
Eng
USA
English
French
Spanish
Chinese
Japanese
Korean
Russian
Thai
(Press , or , then press ENTER)
--Preference Page--
TV Type
Audio
Subtitle
Disc Menu
Region
Parental
Default
Set Region
Auto
Eng
Eng
Eng
USA
China
France
Hongkong
Japan
Taiwan
Britain
Thailand
USA
Tips:
For more information as to replacing battery, please refer to Replacing the Battery.
8
Parental
(Press
--Preference Page--
TV Type
Audio
Subtitle
Disc Menu
Region
Parental
Default
Go To Preference Page
Example showing how to set parental control:
(Press , or , then press ENTER)
Auto
Eng
Eng
Eng
USA
TV Type
Audio
Subtitle
Disc Menu
Region
Parental
Default
Set Parental Control
--Preference Page--
Auto
Eng
Eng
Eng
2
3
4
5
6
7
8
Off
PG
PG 13
PGR
R
NC 17
Adult
21
04
DVD
Before You Start
01
---Preferences page--
TV Type
(Press
TV Type
Audio
Subtitle
Disc Menu
Region
Parental
Default
Go To Preference Page
Audio
(Press
TV Type
Audio
Subtitle
Disc Menu
Region
Parental
Default
Go To Preference Page
Subtitle
(Press
TV Type
Audio
Subtitle
Disc Menu
Region
Parental
Default
Go To Preference Page
Example showing how to set TV type:
--Preference Page-- --Preference Page--
Auto
Eng
Eng
Eng
USA USA
Example showing how to set Audio language:
--Preference Page-- --Preference Page--
Auto
Eng
Eng
Eng
USA
Example showing how to set subtitle language:
--Preference Page-- --Preference Page--
Auto
Eng
Eng
Eng
USA
(Press , or , then press ENTER)
TV Type
Audio
Subtitle
Disc Menu
Region
Parental
Default
Set TV Standard
Auto
Eng
Eng
Eng
PAL
Auto
NTSC
(Press , or , then press ENTER)
TV Type
Audio
Subtitle
Disc Menu
Region
Parental
Default
Preferred Audio Language
Auto
Eng
Eng
Eng
USA
English
French
Spanish
Chinese
Japanese
Korean
Russian
Thai
(Press , or , then press ENTER)
TV Type
Audio
Subtitle
Disc Menu
Region
Parental
Default
Preferred subtitle Language
Auto
Eng
Eng
Eng
USA
English
French
Spanish
Chinese
Japanese
Korean
Russian
Thai
1
PWR
Press it to turn on or turn off the unit.
2
SETUP
During DVD playback, press it to
display system setting menu, user
could select some relative constant
parameters.
3
REPEAT
Press it to activate the repeat function.
4
(STOP)
During playback, press it to stop playing.
5
(PLAY/PAUSE)
During playback, press it to switch
between play and pause;
during stop mode, press it to resume
to play.
6
[ENTER]
In the system setup menu, press
to move cursor upward,
downward, leftward or rightward,
and then press ENTER to confirm the
entering or the selected item.
7
SHIFT
Press it at first, then press the double
function button, the upper one is valid.
8
ZOOM/
Press ZOOM to increase the picture
size; press to replay the current
track or play the previous one.
9
SLOW/
During playback, press SLOW to
play track slow forward or slow
reverse; press to play the next track.
10
ANGLE/
During DVD mode, press ANGLE to
change the viewing angle;
during playback, press to play track
faster reverse.
11
SUBTITLE/
During DVD/MP4 mode, press SUBTITLE to change the subtitle language;
during playback, press to play track
faster forward.
12
DISPLAY
During playback, press it to display the
title, chapter, the elapsed time and the
remained time on the monitor.
13
VOL+/VOL-
Press VOL+ to increase the volume
level; press VOL- to decrease it.
14
NUMBER BUTTONS
Press to select track or chapter.
15
(EJECT)
Press it to insert or eject a disc.
16
MENU
During DVD mode, press it to back to
the main page of the root menu.
17
TITLE
During DVD mode, press it to back to
the main page of the title menu.
During VCD mode, press it to activate
PBC (Playback Control) function.
18
P/N and L/R
Press P/N to adjust the system, press
L/R to select the left/ right channel.
20
9
DVDBefore You Start
04
Specifications
General
Power Requirement
Load Impedance
Max.Level Output
Dimensions
Mounting
Dimensions
Weight
VCD/CD Player Section
VCD Signal System
Signal-to-noise Ratio
Separation
Distortion
14.4V DC
(11-16V allowable)
10K
2V/CH
Approx.157 x162 x50
mm
(d/w/h)
Approx.142 165 51x x
(d/w/h)
mm
Approx.1.1kg
PAL/NTSC
75dB
70dB(1KHz)
0.1%
DVD Player Section
Number of channel
Frequency Response
Dynamic Range
Signal-to-Noise Ratio
Wow and Flutter
Note:
Due to continuous product improvement,
specifications and design are subject to
change without prior notice.
2 channels
20Hz 20,000Hz
98dB
90(JIS)
Less than
measurable limit
--General Setup Page--
SPDIF Output
(Press
--General Setup Page--
TV Display
Angle Mark
OSD Lang
SPDIF Output
Captions
Screen Saver
Go To General Setup Page
Captions
(Press
--General Setup Page--
TV Display
Angle Mark
OSD Lang
SPDIF Output
Captions
Screen Saver
Go To General Setup Page
Example showing how to set lauguage mode:
Wide
On
Eng
Off
Off
On
Example showing how to set captions on/off:
Wide
On
Eng
Off
Off
On
(Press , or , then press ENTER)
--General Setup Page--
TV Display
Angle Mark
OSD Lang
SPDIF Output
Captions
Screen Saver
Set SPDIF Output
Wide
On
Eng
Off
Off
On
SPDIF OFF
SPDIF CODE
SPDIF/PCM
(Press , or , then press ENTER)
--General Setup Page--
TV Display
Angle Mark
OSD Lang
SPDIF Output
Captions
Screen Saver
Closed Captions
Wide
On
Eng
Off
On
On
Off
Screen Saver
(Press
TV Display
Angle Mark
OSD Lang
SPDIF Output
Captions
Screen Saver
Go To General Setup Page
10
Example showing how to set Screen Saver on/off:
--General Setup Page--
Wide
On
Eng
Off
Off
On
(Press , or , then press ENTER)
--General Setup Page--
TV Display
Angle Mark
OSD Lang
SPDIF Output
Captions
Screen Saver
Screen Saver
Wide
On
Eng
Off
Off
On
On
Off
19
04
DVD
Installation
02
--General Setup Page--
TV Display
(Press
TV Display
Angle Mark
OSD Lang
SPDIF Output
Captions
Screen Saver
Go To General Setup Page
Angle Mark
(Press
TV Display
Angle Mark
OSD Lang
SPDIF Output
Captions
Screen Saver
Go To General Setup Page
Example showing how to set TV Display mode:
--General Setup Page--
Wide
On
Eng
Off
Off
On
Example showing how to set picture mode:
--General Setup Page--
Wide
On
Eng
Off
Off
On
(Press , or , then press ENTER)
--General Setup Page--
TV Display
Angle Mark
OSD Lang
SPDIF Output
Captions
Screen Saver
Set TV Display mode
Wide
On
Eng
Off
Off
On
Normal/PS
Normal/LB
Wide
(Press , or , then press ENTER)
--General Setup Page--
TV Display
Angle Mark
OSD Lang
SPDIF Output
Captions
Screen Saver
Set Angle Mark
Wide
On
Eng
Off
Off
On
On
Off
Wiring Connection
IGNITION KEY(+12V)
GROUND
BATTERY(+12V)
RED
BLACK
YELLOW
REMOTE CONTROL RECEIVER
(OPTIONAL)
OSD Lang
(Press
--General Setup Page--
TV Display
Angle Mark
OSD Lang
SPDIF Output
Captions
Screen Saver
Go To General Setup Page
18
Example showing how to set language mode:
(Press , or , then press ENTER)
Wide
On
Eng
Off
Off
On
TV Display
Angle Mark
OSD Lang
SPDIF Output
Captions
Screen Saver
Set OSD Language
--General Setup Page--
Wide
On
Eng
Off
Off
On
English
11
02
DVDInstallation
04
Installation Method 1 Installation Method 2
TRANSPORT SCREW
SCREW
M5*6
SCREW
M4*5
SCREW
M5*20
TRANSPORT
SCREW
SCREW
M4*5
SCREW
M5*6
Installation Method 2
Bend these claws
outward for a tight fit,
if necessary
Front Wall of
the Cab
To support the unit
Changing audio language
(Multi-audio)
DVDs can provide audio playback with
different languages. With DVDs featuring
multi-audio recordings, you can press
18
L/R to switch between language and audio
systems during playback.
Selection options switch as follows:
AUDIO 1 AUDIO 2 AUDIO 3
Note:
* This function is operated by using remote
control.
* This function is only operated by DVDs with
multi-audio recordings.
* The number in the mark on a DVD's
package indicates the number of recorded
languages/audio systems.
Changing the subtitle language
2
the
(Multi-subtitle)
With DVDs featuring multi-subtitle recordings. You can first press SHIFT, then
11
press SUB-T to switch between subtitle
languages during playback.
Selection options switch as follows:
Subtitles 1
Note:
Subtitles 2
7
Subtitles OFF
Selecting Different Menu/Title
Under DVD playback mode, press MENU
17
or TITLE to return to the root menu or
the title menu, the monitor display all the
chapters or all titles. You can press and
14
Number Buttons on the remote control to select different chapter or title.
Note:
* This function is operated by using remote
control.
16
6
the
SET UP MENU
During DVD playback, press SETUP ,
the screen will display system setting picture, the user can select some relative constant parameters. The user also can set it as
needed by moving he cursor and using
t
[ ][ ][ ][ ] buttons, and then press
ENTER to
execute the selecting or enter-
ing item.
Note:
* If the disc that is inserted does not have the
preferred option then the discs own pre ference will be used.
* Regarding SETUP MENU, please refer to
pages 18-23 for more details.
* Some functions varies depending on the types
of models or formats of the disc.
2
6
6
* This function is operated by using remote
control.
* The fuction only operated by DVDs with
multi-subtitle recordings.
* The number in the mark on a DVDs package
indicates the number of recorded subtitle langu ages.
12
is
2
the
17
04
Installation DVD
02
System Button
During DVD playback, firstly press SHIFT,
then press P/N button shows as following:
18
AUTO NTSC
PAL
Note:
* This function also can be operated by the DVD
SETUP MENU
7
Slow motion playback
During DVD mode, firstly press SHIFT
then press SLOW to slow forward or
9
slow backward. There are such speeds as
follows:
1/ 8
1/ 4
1/ 4
1/ 2
Note:
* This function is operated by using remote
control.
7
1/8
1/ 2
the
Increase the size of the picture
During DVD playback, firstly press SHIFT,
then press ZOOM button to increase the
8
picture size, shows as following:
2X 3X 4X
No Change
Note:
* This function is operated by using remote
control.
7
the
On-screen display
During DVD playback, press DISPLAY,
the monitor shows:
Title elapsed time
OFF
Note:
* This function is operated by using remote
control.
chapter
remain time
12
Title remain time
Chapter
elapsed time
the
Changing the viewing angle
(Multi-angle)
With DVDs featuring multi-angle (scenes
shot from multiple angles) recordings, you
can firstly press SHIFT, then press
ANGLE to switch among viewing angles
during playback.
Selection options switch as follows:
ANGLE 1 ANGLE 2 ANGLE 3
Note:
* This function is operated by using remote
control.
* This function is only operated by DVD with
multi-angle recordings.
* This mark on a DVD package indicates
it features multi-angles scenes,
The number in the mark indicates the
number of angles from which scenes were slot.
* If you press ANGLE during fast forward/fast
reverse or pause, fast forward/fast reverse or
pause is canceled and normal playback resumes
but the viewing angle does not change.
7
3
3
10
the
Detach the Unit (for Installation Method 2)
1. Remove the outer trim frame. 2. Insert the keys supplied with the unit
at both sides of the unit as shown in fi gure until they click. Pulling the keys
makes it possible to remove the unit
from the dashboard.
Mounting Sleeve x1
1
Outer Trim Frame x1
4
Rear Mounting Bolt x1
2
Key x2
5
Harness Rubber x1 or
3
Metallic Lath x 1
Bracket
6
16
13
03
Common Operations
DVD
04
Reset the Unit
Before operating the unit for the first time or
after replacing the car battery, the unit must
be reset.
Remove the front panel at first, and then
7
Press RESET button on the base w
a pointed point pen)
to set
Note:
* When ome errors occur on the
button to resume to normal,
it will
morized functions.
* This function can only be operated by the
head unit.
object, (such as a ball
the unit to initial status.
s display, you can
also press RESET
and erase the clock setting and some me-
ith
Turning the Unit On/Off
2
Press PWR button to turn on the unit,
press it again to turn off it.
Note:
* Pressing POWER button on the head unit also
performs the same operation.
Volume Control
Press VOL+ button to increase sou-
13
nd level and press VOL- button to decr-
the
ease sound level.
Note:
* This function is operated by using the remote
control only.
13
the
Eject a Disc
Press to eject a disc.
15
Note:
* Pressing EJECT button on the head unit also
performs the same operation.
Infrared Sensor:
Receptor on the head unit for the card
remote commander.
8
Basic operation of DVD
Insert a DVD disc into the slot, the unit will
automatically switch on.
Note:
* Pressing button on the head unit also can
eject a disc.
Playing Track F.F/F.REW
Press or to play the track fast for-
11
ward or fast rewind: each pressing, the change
is as following:
2X 4X 8X 16X
Note:
* This function is operated by using the remote
control only.
10
Number Buttons
14
press Number Buttons to input the
desired tracks, then it will be played automatically.
Note:
* This function is operated by using remote
control.
the
Repeat Playing
3
press RPT on the remote control to replay as following:
Chapter
Note:
* This function is operated by using remote
control.
* The default setting is DISC REPEAT.
Title
Off
the
Stop the playback
During DVD mode, firstly pressing to
pause playing, pres to play, press
5
button twice to stop playing completely, press
PLAY button to start playing.
Note:
* Pressing STOP on the head unit also performs
the same function.
4
Pause the playback
During DVD mode, press to switch
pause and play mode, during stop mode,
press it again to resume to the playback mode.
Note:
* Pressing PLAY on the head unit also performs
the same function.
5
Playing the Previous/Next Track
During DVD playback, firstly press
to replay the current track, then press
within 3 seconds to play the previous track,
press to play the next track.
9
Note:
* Pressing PREV and NEXT button on the head
unit also the same operation.perform
8
14
15
Loading...