DPA Microphone Type 8011 User's Manual

Hydrophone

Type 8011

User’s Manual

Hydrophone
Type 8011

Technical Description . . . . . . . . . . . . . . . . . . . . . . . Page 2

Full Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . Page 3

Using the Hydrophone . . . . . . . . . . . . . . . . . . . . . . . Page 5

Care of the Hydrophone . . . . . . . . . . . . . . . . . . . . . Page 7

Service and Repair . . . . . . . . . . . . . . . . . . . . . . . . .Page 8

Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 8

CE Standard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Page 8

Contents

User’s Manual

The cartridge

The Hydrophone uses a piezoelectric crystal sensing element, which is
enclosed in a capsule so that it can withstand high pressure encountered
at depths of up to 50m without being damaged or suffering changes in its
performance characteristics. The sensing element gives the Hydrophone a
dynamic range of more than 100dB, so that even large fluctuations in the
SPL emitted from a sound source, or in the distance from the sound source
to the Hydrophone, will cause no distortion in the recorded audio signal.

The cable

The Hydrophone uses an integral cable with a robust and abrasion resistant
polyurethane jacket. The choice of materials allows the product to be used in
permanent installations immersed in water or ice over longer periods of time
without damaging the product or changing its specifications.

The preamplifier

The Type 8011 uses a built-in precision preamplifier, which remains
unaffected by temperature changes. The preamplifier is powered via a
standard P48 system and is equipped with a standard 3-pin XLR-connector
(see Fig. 1 for pin designation).

Important: For the Hydrophone to meet its specifications it must be
powered correctly.

2

Technical Description

User’s Manual

Fig. 1. External view of the
output socket of the Type 8011.