Page 1
Live, broadcast, installation and field applications
GET CLOSER
TO INVISIBLE SOUND
d:screet™ Miniature Omnidirectional Microphones are the versatile workhorses that adapt
to your needs. The mics feature a reinforced cable relief that makes them the most
robust miniature mics available on the market. With eminent sound quality and a large
range of accessories and adapters available for all pro wireless systems, d:screet™ Miniature
Omnidirectional Microphones are the obvious choice for any application requiring a big sound
and a small footprint.
dpamicrophones.com
The versatile workhorse
Miniature Omnidirectional Microphones
Q Exceptional audio quality with low noise and high sensitivity Q Extremely rugged and reliable
Q Adapts to all pro wireless systems Q Large selection of accessories
d:screet™ Miniature Omnidirectional Microphones and accessories are ideal for a broad
range of applications. Whether reproducing the voice or an instrument in film, theater,
television, or other close-miking settings, the mics will not disappoint.
Miniature Omnidirectional Microphones
SC4060 d:screet™ Miniature Omnidirectional Microphone, Hi-Sens
SC4061 d:screet™ Miniature Omnidirectional Microphone, Lo-Sens
SC4062 d:screet™ Miniature Omnidirectional Microphone, XLo-Sens
SC4063 d:screet™ Miniature Omnidirectional Microphone, Lo-Sens & DC
SC4071 d:screet™ Miniature Omnidirectional Microphone, Lo-Cut, Presence Boost
Directional characteristics:
Omnidirectional
Principle of operation:
Pressure
Cartridge type:
Pre-polarized condenser element with vertical diaphragm
Frequency range, ±2 dB:
SC4060, SC4061, SC4062 , SC4063, SCO60-H, SCO61-H:
Soft boost grid: 20 Hz – 20 kHz, 3 dB soft boost at 8 – 20 kHz
High boost grid: 20 Hz – 20 kHz, 10 dB boost at 12 kHz
SC4071, SCO71-H: 100 Hz – 15 kHz with typ. 5 dB soft boost at 4 – 6 kHz
Sensitivity, nominal, ±3 dB at 1 kHz:
SC4060, SCO60-H: 20 mV/Pa; -34 dB re. 1 V/Pa
SC4061, SCO61-H, SC4063, SC4071, SCO71-H: 6 mV/Pa; -44 dB re. 1 V/Pa
SC4062: 1 mV/Pa; -60 dB re. 1 V/Pa
Equivalent noise level, A-weighted:
SC4060, SCO60-H: Typ. 23 dB(A) re. 20 μPa (max. 26 dB(A))
SC4061, SCO61-H, SC4063,SC4071, SCO71-H: Typ. 26 dB(A) re. 20 μPa
(max. 28 dB(A))
SC4062: Typ. 33 dB(A) re. 20 μPa (max. 37 dB(A))
Equivalent noise level, ITU-R BS.468-4:
SC4060, SCO60-H: Typ. 35 dB (max. 38 dB)
SC4061, SCO61-H, SC4063, SC4071, SCO71-H: Typ. 38 dB (max. 40 dB)
SC4062: Typ. 45 dB (max. 49 dB)
S/N ratio, re. 1 kHz at 1 Pa (94 dB SPL):
SC4060, SCO60-H: 71 dB(A)
SC4061, SCO61-H, SC4063, SC4071, SCO71-H: 68 dB(A)
SC4062: 61 dB(A)
Total Harmonic Distortion (THD):
<1% up to 123 dB SPL peak; <1% up to 120 dB SPL RMS sine
Dynamic range:
SC4060, SCO60-H: Typ. 100 dB
SC4061, SCO61-H, SC4063, SC4071, SCO71-H: Typ. 97 dB
SC4062: Typ. 90 dB
Frequency Response (all except SC4071 & SCO71-H)
SCO60-H d:screet™ Miniature Omnidirectional Microphone, Heavy Duty, Hi-Sens
SCO61-H d:screet™ Miniature Omnidirectional Microphone, Heavy Duty, Lo-Sens
SCO71-H d:screet™ Miniature Omnidirectional Microphone, Heavy Duty, Lo-Cut, Presence Boost
Max. SPL, peak before clipping:
SC4060, SCO60-H: 134 dB
SC4061, SCO61-H, SC4071, SCO71-H: 144 dB
SC4062: 154 dB
SC4063: 138 dB
Output impedance:
30 – 40 Ω
Cable drive capability:
Up to 300 m (984 ft)
Power supply:
For wireless systems: Min. 5 V to max. 50 V through DPA adapter
With DPA XLR adapter: 48 V phantom power ±4 V
Connector:
MicroDot
Microphone weight:
SC4060, SC4061, SC4062, SC4063:
7.5 g (0.26 oz) incl. cable and MicroDot connector
SC4071: 9 g (0.32 oz) incl. cable and MicroDot connector
SCO60-H, SCO61-H: 13 g (0.46 oz) incl. cable and MicroDot connector
SCO71-H 14 g (0.49 oz) incl. cable and MicroDot connector
Microphone diameter:
SC4060, SCO60-H, SC4061, SCO61-H, SC4062, SC4063: 5.4 mm (0.21 in)
SC4071, SCO71-H: 5.4 mm (0.2 in)
Microphone length:
SC4060, SCO60-H, SC4061, SCO61-H, SC4062, SC4063: 12.7 mm (0.5 in)
SC4071, SCO71-H: 17 mm (0.67 in)
Cable length:
1.8 m (6 ft)
Cable diameter:
SC4060, SC4061, SC4062, SC4063, SC4071: 1.6 mm (0.06 in)
SCO60-H, SCO61-H, SCO71-H: 2,2 mm (0.09 in)
Color:
SC4060, SC4061: Black, beige, brown, white
SC4062, SCO60-H, SCO61-H, SCO71-H: Black, beige
SC4063, SC4071: Black, beige, white
Polarity:
Positively increasing sound pressure produces
positive going voltage on MicroDot pin
Polar Pattern (normalized, all except SC4071 & SCO71-H)
dpi-mini-f
Frequency Response (SC4071& SCO71-H)
0
-10
-20
20 1
10050
200 Hz 500
2
040
51
20
5
80 Hz
125 Hz
250 Hz
500 Hz
1 kHz
8 kHz
2 kHz
20 kHz
16 kHz
4 kHz
Polar Pattern (normalized, SC4071 & SCO71-H)
5
Page 2
A durable package
d:screet™ Miniature Omnidirectional Microphones are designed to withstand the toughest of
conditions. Their unique Double Vent Protection System oers great resistance to humidity and
sweat and the reinforced cable relief is built to withstand the constant twists, bends and pulls that
are part of everyday use. With a gold-treated diaphragm and microphone housing plus a kevlar
reinforced cable, the d:screet™ series is made to endure.
The d:screet™ Miniature Microphone series is the reliable workhorse you can count on.
Heavy Duty
When strong isn´t strong enough and when invisibility is of less importance, we oer d:screet™ Heavy
Duty microphones, which feature stainless steel housing, heavy duty cable relief and thicker 2.2 mm
cable.
Industry leading sound quality
With very low noise and an extremely high sensitivity, d:screet™ Miniature Omnidirectional
Microphones oer the most clear, transparent and natural sound available on the miniature mic
market. These mics are capable of handling up to 154 dB peak before clipping. And with a linear
response, low distortion and an extremely large dynamic range, they sound great no matter the
application.
Flexibility and adaptability
With a wide selection of accessories and adapters, d:screet™ Miniature Omnidirectional Microphones
are suited for any task. The variety of mounting accessories allows for easy and stylish microphone
placement no matter your miking needs and our line of adapters makes the d:screet™ line compatible
with all pro wireless systems.
Loading...