DPA d:fine FID-B Slim Technical data

Page 1
Amazing sound. Clean design. Who says broadcasters can’t have it both ways?
In-Ear Broadcast Headset Mics
The days of broadcast hosts fiddling with two parallel systems – one for the mic and one for in-ear communication – are over. Our new d:fine™ In-Ear Broadcast Headset Microphone is the first broadcast solution that gives you uncompromising mic perfor­mance and convenient in-ear communication. All in one simple solution..
We conceived it for broadcast professionals who insist on superior voice reproduction. We designed it for simple setup and wiring. What’s in it for you? Crystal-clear commu­nication from producer to host. Daylong user comfort. And viewers who can hear your host’s message, no matter what the venue.
Patent pending
Available combinations
Single-Ear Mount, Single In-Ear Driver
Dual-Ear Mount, Single In-Ear Driver
Dual-Ear Mount, Dual In-Ear Drivers
Features
• Mic and in-ear monitor integrated in one unique solution
• Easy to mount with minimum cable clutter
• Minimalist design, outstanding comfort
• DPA’s industry-leading microphone capsule technology and sound quality
www.dpamicrophones.com/dfine
Page 2
Specifications
dB
04
dB
04
Green line is far field (more than 30 cm/12 in).
dpi-dfine-ie-f
In-Ear Broadcast Headset Microphones
Specifications
d:fineTM Omnidirectional Headset Microphones
Directional characteristics
Omnidirectional Principle of operation Pressure
Frequency range, ± 2 dB
d:fine omnidirectional 20 Hz - 20 kHz with 3 dB soft boost at 8 - 15 kHz 4065, 4066, 4067 and d:fine 66: 20 Hz - 20 kHz with 3 dB soft boost at 8 - 20 kHz Sensitivity, nominal, ± 3 dB at 1 kHz 6 mV/Pa; -44 dB re. 1 V/Pa Equivalent noise level, A-weighted Typ. 26 dB(A) re. 20 µPa (max. 28 dB(A)) Total Harmonic Distortion (THD) <1 % up to 123 dB SPL peak <1 % up to 120 dB SPL RMS sine Dynamic range Typ. 97 dB Max. SPL, peak before clipping 144 dB Power supply (for full performance) Min. 5 V - max. 50 V through DPA adapter for wireless systems. 48 V phantom power ± 4 V with DAD6001-BC XLR adapter Current consumption Typ. 1.5 mA (microphone)
3.5 mA with DAD6001-BC XLR adapter Connector MicroDot
Frequency Response of d:fineTM Omnidirectional
10
0
-10
-20
-30 20 Hz 50 100 200 500 1 kHz2 5102
Frequency Response of d:fineTM Directional
10
0
-10
-20
-30 20 Hz 50 100 200 500 1 kHz2 5102
Black line is near field (2 – 3 cm/0.8 – 1.2 in).
Color (microphone, cable and earhook) Black, beige, brown Microphone head size (h x w x d)
9.5 x 5.3 x 2.9 mm (0.37 x 0.21 x 0.11 in) Cable length
1.3 m (4.3 ft)
Specifications, In-Ear Drivers Type:
Dynamic earplug
Connector
3,5 mm stereo Mini-Jack.
Single In-Ear
Signal at Mini-Jack Tip
Dual In-Ear
Signal at Mini-Jack Tip (Left – mic boom side) and Ring (Right)
Sensitivity
107 dB/V
Nominal impedance
18 Ω
2 sizes Ear-pads are included
Specifications
d:fineTM Directional Headset Microphone
Directional characteristics
Cardioid
Principle of operation
Pressure gradient
Frequency range, ± 2 dB, Near field 2-3 cm (0.8-1.2 in)
d:fine directional 100 Hz - 20 kHz with 3 dB soft boost at 8 - 20 kHz 4088 and d:fine 88 100 Hz - 20 kHz with 4-6 dB soft boost at 15 kHz
Sensitivity, nominal, ± 3 dB at 1 kHz
6 mV/Pa; -44 dB re. 1 V/Pa
Equivalent noise level, A-weighted
Typ. 28 dB(A) re. 20 µPa (max. 30 dB(A))
Total Harmonic Distortion (THD)
<1 % up to 123 dB SPL peak <1 % up to 120 dB SPL RMS sine
Dynamic range
Typ. 95 dB
Max. SPL, peak before clipping
144 dB
Power supply (for full performance)
Min. 5 V - max. 50 V through DPA adapter for wireless systems. 48 V phantom power ± 4 V with DAD6001-BC XLR adapter
Current consumption
Typ. 1.5 mA (microphone)
3.5 mA with DAD6001-BC XLR adapter
Connector
MicroDot
Polar Pattern of d:fineTM Omnidirectional
0
1 kHz
2 kHz
Polar Pattern d:fine
0
250 Hz
500 Hz
Color (microphone, cable and earhook) Black, beige, brown
Cable length
1.3 m (4.3 ft)
Specifications, In-Ear Drivers Type:
Dynamic earplug
Connector
3,5 mm stereo Mini-Jack.
Single In-Ear
Signal at Mini-Jack Tip
Dual In-Ear
Signal at Mini-Jack Tip (Left – mic boom side) and Ring (Right)
Sensitivity
107 dB/V
Nominal impedance
18 Ω
2 sizes Ear-pads are included
5 dB
4 kHz
8 kHz
16 kHz
20 kHz
TM
Directional
5 dB
16 kHz
1 kHz
2 kHz
4 kHz
8 kHz
Frequency Response (d:fineTM 66)
Frequency Response (d:fineTM 88)
Polar Pattern (d:fineTM 66)
5
1 kHz
8 kHz
2 kHz
20 kHz
16 kHz
Polar Pattern (d:fineTM 88)
4 kHz
80 Hz
125 Hz
250 Hz
500 Hz
Loading...