DPA d:dicate MMP-C Datasheet

Download

Page 1

MMP-C, d:dicate™ MMP-C Compact Preamp

Ultra-compact preamp with active drive for impedance balancing.

Has a slightly softer character than the other preamps in the DPA d:dicate Recording Microphones series.

Combine this preamp with any capsule in the series.

Related article from the Microphone University: Impedance balancing with Active Drive vs transformer coupled outputs

For more information please visit:

www.dpamicrophones.com

Page 1 of 2

Page 2

MMP-C, d:dicate™ MMP-C Compact Preamp

Output connector:

XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase

Low-cut frequency, -3 dB:

15 Hz

Noise with shorted input, A-weighted:

0.6 µV

Output voltage, RMS:

> 4 V

Output voltage, peak:

> 5.6 V

Type of electronic circuit:

Active

THD@1VRMS, 1kHz:

< 0.2 %

Dynamic range:

136 dB

Output impedance:

< 200 ohm

Output balance principle:

Impedance balancing with Active Drive

Common Mode Rejection Ratio (CMRR):

> 50 dB

Powersupply (for full specifications):

48 V Phantom power (± 4 V)

Current consumption:

2.8 mA

Color:

Matte black

Weight:

40 g (1.4 oz)

Diameter:

19 mm (0.75 in)

Length:

41 mm (1.6 in)

Cable drive capability:

100 m (328 ft)

Temperature range:

-40 °C to 45 °C (-40 °F to 113 °F)

Relative Humidity (RH):

Up to 90 %

Head Office US Sales Office DPA Microphones A/S DPA Microphones, Inc. Gydevang 42- 44 1500 Kansas Avenue, Unit 3A DK-3450 Alleroed Longmont, CO 80501 Denmark USA Tel: +45 4814 2828 Tel: +1 303-485-1025 Fax: +45 4814 2700 Fax: +1 303-485-6470 info@dpamicrophones.com info-usa@dpamicrophones.com www.dpamicrophones.com www.dpamicrophones.com