DPA 4098H User Manual

Hanging Supercardioid Microphone

user’s manual

DPA 4098H

www.dpamicrophones.com

3

Product description

The DPA 4098H Supercardioid Microphone is designed for hanging applications in
churches, performing arts centers, orchestra pits, and TV studios. The 4098H deliv­ers clear and natural sound for live sound reinforcement of choirs, instrumental
or vocal groups, speech or live audiences. Extremely low in profile, the integrated
gooseneck provides the ability to easily aim the mics, ensuring perfect positioning
with minimal visual impact since the mics’ slim cable is nearly invisible. These mi­crophones oer flat response and uniform o-axis sound combined with excellent
gain-before-feedback characteristics for live sound reinforcement. The mic has an
extremely high rejection of RF interference post the signal balanced XLR connector
which oers more than 60 dB common mode rejection.

Adjusting the gooseneck and microphone angle

The gooseneck is extremely flexible and the microphone can be angled to any de­sired position. It has a unique angle memory and does not change its position or
ability to be repositioned over time and use.
Adjust the microphone to the desired angle. Since goosenecks can generate loud
crackling sound, adjustment should only be done when not connected to the audio
chain.

Application notes

Always use the 4098 with its dedicated foam windscreen.

For capturing smaller choirs at shorter distance, point the capsule to the last row of
singers. The supercardioid pick-up pattern will attenuate the sounds and produce
a natural balance between the nearest (loudest but attenuated) and the furthest
(weakest but performing to the microphones most sensitive direction).

54

Using the DPA adapters and extension cables

The DPA 4098H microphone is terminated with a MicroDot connector. Connect
the microphone output to adapter or extension cable by moving the protection cap,
then secure the MicroDot and reposition the protection cap:

When used in conjunction with our range of more than 35 adapters, the Micro­Dot connector provides the ability to connect to virtually all available pro wireless
systems.

Various wireless systems require the use of electronics inside the adapter to opti­mize the signal level, the DC oset, and powering of the built-in microphone pre­amplifier. Using the adapters from DPA ensures the correct electronic circuit with
the listed types of wireless systems (please visit www.dpamicrophones.com/adapters).

Do not attempt to employ non-standard adapters or connectors as you might dam­age the microphone.

A connector-tightening tool is supplied with each microphone and adapter and
should be employed whenever the MicroDot connector needs to be tightened.
Utilize the tightening tool before each use to ensure the connection is secure and
that the cable cannot rotate by the cable relief.

The included XLR adapter, DAD6001, allows the 4098H to work as a regular 48V
phantom powered microphone. For stand mounting, attach the microphone to the
DAD6001 and use the UA0639 Microphone Clip. For hanging, the DAD6001 adds
weight and helps stabilize the microphone.

The microphone can also be hung with a miniature extension cable (not included)
for minimal visual appearance.

6

SPECIFICATIONS

Directional characteristics

Supercardioid

Principle of operation

Pressure gradient

Cartridge type

Pre-polarized condenser

Frequency range

20 Hz – 20 kHz

Frequency range, ±2 dB, 20 cm (7.9 in) distance

80 Hz – 15 kHz with 3 dB diffuse field boost at 8-15 kHz

Sensitivity, nominal, ±3 dB at 1kHz

20 mV/Pa; -34 dB re. 1 V/Pa

Equivalent noise level, A-weighted

Typ. 23 dB(A) re. 20 µPa (max. 26 dB(A))

S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL)

71 dB(A)

Total Harmonic Distortion (THD)

<1 % up to 123 dB SPL peak

<1 % up to 120 dB SPL RMS sine

Dynamic range

Typ. 100 dB

Max. SPL, peak before clipping

134 dB

Output impedance

From MicroDot: 30 – 40 ohm

From DAD6001: 100 ohm

Cable drive capability

Up to 300 m (984 ft) with DAD6001 XLR adapter

Output balance principle

Signal balanced with DAD6001 XLR adapter

Common Mode Rejection Ratio (CMRR)

> 60 dB from 50 Hz to 15 kHz with DAD6001 XLR adapter

Power supply (for full performance)

Min. 5 V – max. 50 V through DPA adapter for wireless systems

48 V phantom power ±4 V with DAD6001 XLR adapter

Current consumption

1.5 mA (microphone)

3.5 mA with DAD6001 XLR adapter

Connector

MicroDot

3pin XLR-M from DAD6001 XLR adapter

Color

Black (4098HB)

White (4098HW)

Weight

5 g (0.18 oz)

Capsule diameter

5.4 mm (0.2 in)

Microphone length

154 mm (6 in)

Gooseneck length

95 mm (3.7 in)

Polarity

Positively increasing sound pressure produces positive-going voltage

at MicroDot pin (and pin 2 on DAD6001 XLR adapter)

Operating temperature range

-40 °C to 45 °C (-40 °F to 113 °F)

Operating relative humidity (RH)

Up to 90 %

7

8 9

Typical directional characteristics of 4098H (normalized).

10

-10

0

-20

20 Hz 50 100 200 500 1 kHz2 5102040

0˚
30˚

60˚

90˚

180˚

dB

Typical on- and o-axis frequency response of 4098H at 20 cm (7.9 in) distance.

10

-10

0

-20

20 Hz 50 100 200 500 1 kHz2 5102040

10 cm

15 cm

20 cm

30 cm

100 cm

dB

Proximity eect exhibited by 4098H.

250 Hz

500 Hz

8 kHz

16 kHz

4 kHz

2 kHz

1 kHz

5 dB

Accessories included

DAD6001 Adapter: MicroDot to XLR

Accessories available

UA0639 Microphone Clip

DUA0518B Windscreen for 4098H, Black, 5 pcs.

DUA0518W Windscreen for 4098H, White, 5 pcs.

DAO6005-B Miniature Microphone Extension Cable, Black, 3.5 m (11.5 ft)

DAO6005-W Miniature Microphone Extension Cable, White, 3.5 m (11.5 ft)

DAO6010-B Miniature Microphone Extension Cable, Black, 10 m (32.8 ft)

DAO6010-W Miniature Microphone Extension Cable, White, 10 m (32.8 ft)

DAO6020-B Miniature Microphone Extension Cable, Black, 20 m (65.6 ft)

DAO6020-W Miniature Microphone Extension Cable, White, 20 m (65.6 ft)

More than 35 different connection adapters to wireless systems,

please refer to www.dpamicrophones.com/adapters.

Microphone maintenance

DPA 4098H is designed with highly resistant and protective materials in the construction so do not tr y

to clean the microphone as it is unnecessary.

Do not use any spray or fluid containing chemicals that could remove static electricity on or close to

the microphone. This could cause permanent damage.

Cleaning or washing of the windscreen can be done in distilled water.

The DPA 4098H is very resistant to humidity, but keep it away from unnecessary exposure to water

and cleaning fluids (keep element dry at all times). It should not be used in direct, heavy rain.

Avoid excessive pressure on the microphone element. The microphone will not perform to its specifi-

cations if the directional tube under the foam windscreen has been bent from its original shape. If the

directional tube becomes misshapen, replacement is necessary.

Contact DPA

Find your nearest DPA representative on our website, www.dpamicrophones.com, or send e-mail

to [e-mail].

Head Oce, Denmark:

Tel: + 45 4814 2828

Fax: + 45 4814 2700

US Sales Oce:

Tel: [phone]

Fax: [phone]

© May 2012, DPA Microphones A/S

Product features and specifications are subject to change without notice.

Service & repair

If you are not satisfied with the characteristics exhibited by this product, please contact your nearest DPA Microphones representative
for support.

Warranty

d:fine is covered by a five-year limited warranty.

CE marking

This product conforms with all relevant directives approved by the European Commission.

DPI4098H

Head Office

DPA Microphones A/S

Gydevang 42-44

DK-3450 Alleroed, Denmark

Tel: [phone]

Fax: [phone]

[e-mail]

www.dpamicrophones.com

US Sales Office

DPA Microphones, Inc.

1500 Kansas Avenue, Unit 3 A-D

Longmont, Colorado 80504

Tel: [phone]

Fax: [phone]

[e-mail]

www.dpamicrophones.com

www.dpamicrophones.com