Page 1
4097 CORE
Micro Shotgun Microphone
dpamicrophones.com/4097-shotgun
User’s Manual
Page 2
Introduction
With its small footprint and clear audio pick up, the 4097
CORE Micro Shotgun Microphone can be used in the tightest
spaces. It is optimized to pick up speech in applications such
as in ENG/EFP broadcast or as a plant mic on film sets.
The mic sits on a 10 cm (4 in) gooseneck with a built-in shock
mount. A free-running nut on the MicroDot enables the mic
to be quickly turned and locked in the correct position.
Page 3
The microphone uses a small
diaphragm prepolarized condenser
capsule with a supercardioid pickup
pattern mounted in an interference
tube, which sits inside of a replaceable
foam windscreen.
The interference tube in the 4097
CORE Micro Shotgun increases its
directionality, while maintaining flat onaxis frequency response and consistent
o-axis response. This allows the mic
to isolate what you’re trying to pick
up while attenuating sounds from the
sides and rear.
Page 4
Adapters for wireless
DPA Microphones’ ingenious adapter system is one of a
kind in the industry. It protects your investment in fantastic
sound for years to come and works with all leading wireless
mic solutions, such as Lectrosonics, Sennheiser, Shure, Sony,
Wisycom and many more.
dpamicrophones.com/adapters
Page 5
Optional accessories
The 4097 CORE Micro Shotgun works with a variety of
optional accessories to increase its functionality. Not only can
it be extended to double length using a gooseneck extension,
it works with all of our standard clips and mounting options
known from the 4099 Instrument Mic series, for example:
GE4099CS4099 CM1618B00
UC4099 CM4099 PC4099
dpamicrophones.com/accessories
Page 6
Specifications:
4097-DC-G-B00-010
4097 CORE Micro Shotgun Mic, Black MicroDot, 10 cm (4 in) full Gooseneck
Directional characteristics
Supercardioid
Frequency response
20 Hz - 20 kHz
Effective frequency range, ±2 dB, 20 cm (7.9 in)
80 Hz - 15 kHz with 2 dB soft boost at 10 - 12 kHz
Sensitivity, nominal ±3 dB at 1 kHz
16 mV/Pa; -36 dB re. 1 V/Pa
Equivalent noise level, A-weighted
Typ. 23 dB(A) re. 20 µPa (max. 26 dB(A))
Distortion (THD) <1%
130 dB SPL RMS, 133 dB SPL peak
Dynamic range
Typ. 110 dB
Max. SPL, THD 10%
135 dB SPL peak
Connector
MicroDot
Color
Black
Dimensions
Weight: 10 g (.35 oz)
Mincrophone length: 10.4 cm (4 in)
Full specsheet at: dpamicrophones.com//4097-shotgun
Page 7
20 Hz 50 100 200
500
1 kHz 2510 20 40
dB
10
-10
-20
-30
0
0
°
30
°
60
°
90
°
180
°
Polar pattern
º
0
5
dB
Frequency response
Measured at 20 cm (7.9 in)
250 Hz
500 Hz
1 kHz
2 kHz
4 kHz
8 kHz
16 kHz
Page 8
Service & repair
If you are not satisfied with the characteristics exhibited by this product, please go to dpamicrophones.com/service for
instructions.
Warranty
The 4097 CORE Micro Shotgun Microphone is covered by a two-year limited warranty.
CE marking
This product conforms to all relevant directives approved by the European Commission.
© May, 2020. DPA Microphones A/S
Product features and specifications are subject to change without further notice.
DPI-M-4097MS-01
Loading...