Doyon DAF001V3 Installation Manual

Installing and Using

Water Meter

DOYON

DAF001V3

Release V2.0

March 2005

1 Installation

(DAF001V3)

24 Vac/dc, 50/60

24Vac - 50/60Hz

IN

3/8 Female

Out

1/2 Male

The set o+p is supplied together with the water meter.

You must always use the filter p or small particles will damage the meter and your
dough will be dirty and unusable.

To connect the filter to the inlet and additional pipes to the outlet you must grab with an
appropriate tool the fixing parts n, so that internal pipes do no move causing water

leaks.

If you need to open the meter (voiding the warranty) you should fully unscrew r and
partially q, twirling the box cover over its left vertical axle, otherwise internal cables

can be broken.

Do not hang the meter by the electrical cables or by the pipes. Appropriate fixing
accessories are supplied to fix the meter in the wall. First fix the meter on a perfectly
vertical wall as in the picture and then connect power and water pipes. If the meter is
not fixed vertically the accuracy of the metering device will decrease.

March 2005

2 Using the water meter

2.1 Description of the electronic controls

1 – Dosing “ON” (valve open)

2 – Start / stop dosing

6

7

8

9

March 2005