21/04/17
CONNECT A REMOTE
* STANDARD MODE
* ADVANCED MODE
* DELETE A REMOTE
watch the video
easygate.com.au
easygate.com.au
EN Installation and use
instruc tions and warnings
IT Istruzioni ed avvertenze
per l’installazione e l’uso
FR Instructions et avertisse-
ments pour l’installation et
l’utilisation
ES Instrucciones y adverten-
cias para la instalación y el
uso
DE Anweisungen und Hinwei-
se für die Installation und
die Bedienung
PL Instrukcje instalacji i użyt-
kowania i ostrzeżeni
NL Aanwijzingen en aanbeve-
lingen voor installering en
gebruik
IS0033A00MM
23-02-2011
RED
BLACK
+ (~)
- (~)
WHITE
WHITE
VIOLET
OUTPUT 2
OUTPUT 1
24V
ac/dc
VIOLET
GTX4 REMOTE
CONNECT in
STANDARD mode-1
Mhouse GTX4 remotes have two modes.
STANDARD Mode-1 connects the remote to only one
motor. Each of the four buttons is assigned set tasks.
ADVANCED Mode-2 is used to customise GTX4
settings. Also when connecting multiple automation
systems (e.g. 2nd gate, garage door/s, lights, watering
system) to the Mhouse remote.
Remotes supplied in motor kits come
already connected and ready to operate
a single gate motor.
Standard mode sets all four buttons with
pre-set commands (right).
Press & hold P1. Release P1 when
1
light comes on. Complete step-2 within
10sec.
Press a T-button for 3sec+. When
2
connected P1 flashes 3 times.
Additional remotes - repeat step 2 while
light is on (within 10sec.).
DELETE a REMOTE
Open-stop-close
or
open, timed close*
T1
T3
Open only
Pedestrian
T2
access
Close only
*Auto-close
function is set
on the control
board.
T4
Press & hold P1 button. Continue to
1
hold after the light comes on.
Press & hold a remote button.
2
P1
Release both buttons after P1 light
flashes 5 times.
Done!
The remote is disconnected from the
control board.
2
EN Installation and use
instruc tions and warnings
IT Istruzioni ed avvertenze
per l’installazione e l’uso
FR Instructions et avertisse-
ments pour l’installation et
l’utilisation
ES Instrucciones y adverten-
cias para la instalación y el
uso
DE Anweisungen und Hinwei-
se für die Installation und
die Bedienung
PL Instrukcje instalacji i użyt-
kowania i ostrzeżeni
NL Aanwijzingen en aanbeve-
lingen voor installering en
gebruik
IS0033A00MM
23-02-2011
RED
BLACK
+ (~)
- (~)
WHITE
WHITE
VIOLET
OUTPUT 2
OUTPUT 1
24V
ac/dc
VIOLET
CONNECT in
ADVANCED MODE-2
Before a remote can be set from Standard
to Advanced mode it needs to be
disconnected (deleted) from the control
board.
Unlike mode-1 where all T-buttons are
pre-programmed, mode-2 needs buttons
to be programmed individually.
Commands are set using P1 button.
Press P1 number of times to match the
1
command. See Advanced Functions.
Hold T-button 3sec.+ to assign command.
2
Open
automation N°1
T1
Pedestrian access
T2
automation N°1
T4
Operate*
automation N°3
P1
P1 light will flash the same number as the
command to conrm.
E.g.
Setting Pedestrian access command:
Step1: Press P1 twice.
Step2: Hold T2
P1 light will ash 3-times
Done.
To set additional Mhouse remotes with
the same command, repeat step-2 within
10sec.
T3
Operate*
automation N°2
*Function is set using
controller of automation
ADVANCED FUNCTIONS
PRESS P1 COMMAND
Once “Open”
Twice “Ped. opening”
Three times “Open only”
Four times “Close only”
Five times “Stop”
Six times “Apartment block” open
Seven times “High priority open”
Eight times “Pedestrian opening 2”
Nine times “Pedestrian opening 3”
Ten times “Open+ block automation”
Eleven times “Close + block automation”
Twelve times “Block automation”
Thirteen times “Unblock automation”
Tech
Support
3
1800 241 733
Loading...