Dowco Cruiser Sport Tank Bag User Manual

Cruiser / Sport (mag mount) Tank Bag

Installation Instructions

Congratulations on your purchase of a Cruiser /
Sport Tank Bag. Assembled to your cruiser or sport
bike, the bag will provide extra storage for cell
phones, maps, clothes and other items for short or
long trips . Please carefully read the information

below before installation.

Magnetic Mount Harness Installation

Place and center magnetic unit directly on METAL
tank. Position to conform to tank profile and not to
interfere with full left or right steering.
NOTE: Do not put anything with credit cards near the
magnets!

Overloading any tank bag will result in a high center
of gravity, which will cause bike to become top heavy
and susceptible to unexpected tipping, especially on
lean-in while negotiating high speed turns.
MAXIMUM ALLOWABLE LOAD LIMIT IS 5 LBS.

Care & Cleaning:

This product is supplied with a gasoline and scratch
resistant neoprene layer. However, care should be
taken to avoid gas spills and a heavy buildup of dust
and/or dirt under the harness. Excessive dust and/or
dirt may become embedded in the neoprene, which
may lead to scratches in the painted finish. Wiping
with a mild bike wash detergent and applying a good
quality wax will reduce the chance of
scratching.Remove the bags before washing the
bike.Use a mild detergent and soft brush to remove
dirt or road grime from the bags. Rinse thoroughly
and allow to air dry before using. Do not put in washer
or dryer. Dry-cleaning is not recommended.

Note:Your bags are manufactured from heavy-weight
water-proof polyester materials. However, in the event
of heavy rain, moisture may enter the bags through
seams or zippers. It is highly recommended that
important papers, valuable items, or clothing be
wrapped in plastic for added protection

Item # 00510

Revised 12/10/04

Printed in China

DOWCO, Inc.
4230 Clipper Drive
Manitowoc, WI 54220
Fax: [phone]
Phone: [phone]