Doughpro DP1300 Installation Manual

5HEXLOGLQJ3LVWRQ$VVHPEO\

Listed:

20281 Harvill Ave
Perris, CA 92570

[phone]

[phone]

DP

Air Driven

Automatic Dough Press

Proprocess Corporation

~et
Paramount, CA 90723

Phone [phone]
Toll Free [phone]
Fax [phone]

Website: www.doughpro.com
E-Mail: [e-mail]

REBUILDING PISTON ASSEMBLY DP1300

3) REMOVE BLACK AIR HOSE
REMOVE CLEAR HOSE

4) MARK PISTON & PISTON COVER
TO LINE UP GUIDE WHEN
RE-ASSEMBLY WITH MARKER AS
SHOWN.

5) UNSCREW 12 SOCKET HEAD
SCREWS FROM PISTON COVER.

ILS 1.1

I

LS 1.3

20281 Harvill Ave

Perris, CA 92570

Toll Free: [phone]

Fax: [phone]

1) IMPORTANT: DISCONNECT
ELECTRICAL AND AIR SUPPLY

PRIOR TO SERVICE.

2) REMOVE SILICONE

3) UNSCREW FOUR SET SCREWS ON
PIVOT ARM.

(2 OUTER SCREWS & 2 INNER SCREWS)

INNER SCREWS LOCATED BEHIND OUTER SCREWS

6) UNSCREW LONG SOCKET

SCREW AT THE CENTER OF THE
PLATE.

7) USE 2 OF THE 3/8 SOCKET HEAD’S &

CHANNEL TO REMOVE PISTON’S
PLATE.

8) CLEAN ALL GREASE AND DIRT

OUT.
(USE WD-40 OR MINERAL SPIRITS)

9) CHECK FOR CRACKS, IF SO, NEED

TO REPLACE PART.

ILS 1.2

HEAD

20281 Harvill Ave, Perris, CA 92570 Toll Free: [phone] Fax: [phone] REBUILDING PISTON ASSEMBLY DP1300