Doug Fleenor Designs RERUN-P Datasheet

Rerun Portable

Connector:

DMX512 Input: Gold plated 5 pin Neutrik

DMX512 Output: Gold plated 5 pin Neutrik on 18" pigtail

Connector pin out:

DMX512 Input

DMX512 Output

1 (C) DMX512 common

2 ( -) DMX512 data -

3 (+) DMX512 data +

model: RERUN-P

technical data sheet

The Rerun Portable is a lighting control station capable of storing up to ten 40-minute shows. Shows are recorded by capturing the output of a DMX512 console. The recorded show start and end points may be trimmed non-destructively. Each show can be set to hold the last look, loop to itself or link to another show. Shows are started by pressing one of the ten show buttons.

The Rerun Portable is housed within a rugged Pelican™ water resistant case. Just under the clear case lid are the DMX512 input and keypad. The DMX512 out and attached wall wart power supply connections pass through the case on liquid tight strain reliefs.

The Rerun Portable system can work in conjunction with a lighting console, automatically switching between recorded shows and console control. When the console generates DMX512 the Rerun Portable retransmits the incoming DMX512 data. Thus the console operates normally. Upon loss of DMX512 from the console, the

Rerun Portable starts its previous show. Rerun also comes in an architectural version (model RERUN-A) and a rack mount version (model RERUN-

RM) SPECIFICATIONS:

Input circuit: ESD protected EIA-485 transceiver (LT1785) Output circuit: ESD protected EIA-485 transceiver (LT1785) Isolation: None: DMX input is not isolated from DMX output Indicators: Ten green SHOW LEDs

One green PAUSE LED One green LOOP LED One yellow START LED One yellow END LED One red INPUT/RECORD LED

User controls: Ten [SHOW] buttons One [PAUSE] button One [LOOP] button One [REWIND] button One [FORWARD] button One recessed [RECORD] button

Option Jumpers:

INSTALLED

REMOVED

JP1

Recording enabled

Recording/editing disabled

JP2

Run show on DMX512 loss

Hold last look on DMX512 loss

JP3

Normal operation

Run hardware test

JP4

Normal operation

Disable operation

JP5

Unused

JP6

Normal operation

Erase memory (DANGER!)

SPECIFICATIONS: (Continued)

Power input: Attached universal power supply 100 - 240VAC, 50/60 hertz, 5 watts Color: Case: Clear with yellow liner

Keyboard: Black anodized with white silk screened nomenclature Size: 5.06"H × 3.12"D × 7.50"W

Limited Manufacturer's Warranty

Products manufactured by Doug Fleenor Design (DFD) carry a five-year parts and labor warranty against manufacturing defects. It is the customer's responsibility to return the product to DFD at the customer's expense. If covered under warranty, DFD will repair the unit and pay for return ground shipping. If a trip is necessary to the customer's site to solve a problem, the expenses of the trip must be paid by the customer.

This warranty covers manufacturing defects. It does not cover damage due to abuse, misuse, negligence, accident, alteration, or repair by other than by Doug Fleenor Design.

Most non-warranty repairs are made for a fixed $50.00 fee, plus shipping.

Doug Fleenor Design, Inc.

396 Corbett Canyon Road Arroyo Grande, CA 93420 (805) 481-9599 voice and FAX (888) 4-DMX512 toll free (888) 436-9512 web site: http://www.dfd.com e-mail: info@dfd.com