Doug Fleenor Designs E8ANL-DIN Data Sheet

8 channel Ethernet to analog interface

models: E8ANL-DIN, E8ANL-DIN-JBOX, E8ANL-DIN-JBOX-PS

technical data sheet

The E8ANL-DIN is an Ethernet (sACN or ArtNet) interface with 8
analog (0-10V) outputs (each with its own common terminal) and a
DMX512 output. Configuration is via a built-in webserver. The
standard Ethernet connector (8P8C aka RJ-45) accepts PoE (power
over Ethernet) or the user may supply power (18 to 48 VDC) on a
two-position terminal block. DMX512 and analog connections are on
pluggable Phoenix terminal blocks. The device mounts on standard
35mm “top hat” DIN rail. The E8ANL-DIN can be pre-mounted in a
NEMA 1 electrical enclosure (model E8ANL-DIN-JBOX).

Each analog output is capable of sourcing or sinking up to 10mA. No
user adjustments or modifications are needed to select sourcing or
sinking modes. Each output channel has a dedicated common terminal
to ease field wiring. Both the analog and DMX512 outputs are isolated
from the input. The outputs are not isolated from each other.

Indicators are provided for POWER, SIGNAL, and MIMIC 1. The latter mimics the level of the first
analog output. These are useful diagnostic indicators to verify addressing and operation.

SPECIFICATIONS:
Input circuit: 802.3 Ethernet compliant input (LAN8720).
Input signal: ArtNet and sACN (E1.31) Ethernet protocols.

Isolation: Ethernet/power input is isolated from the analog/DMX512 outputs. The

outputs are not isolated from each other.
Input connector: Ethernet RJ-45 with 802.3af PoE (Power over Ethernet) capabilities.
Power input: 802.3af PoE (Power over Ethernet), 18-48 VDC optional.
Output connectors: Analog: two 8-position pluggable terminal blocks (each terminal block has

four outputs and four commons).
DMX512: one 3-position pluggable Phoenix terminal block.

Doug Fleenor Design, Inc.

396 Corbett Canyon Road
Arroyo Grande, CA 93420
[phone] voice and FAX
(888) 4-DMX512 toll free [phone]
web site: http://www.dfd.com
e-mail: [e-mail]

SPECIFICATIONS: (continued)
Indicators: Red POWER indicator.

Green MIMIC 1 indicator mimics the intensity of output 1 (useful in

troubleshooting).

Green SIGNAL indicator illuminates when an input signal is present;

flashes during testing.
Configuration: Interface uses a built-in webserver after being discovered by DFD Node

Discovery (available for download at http://www.dfd.com/NodeDisc.html).

Environmental: 0-40 °C (32-104 °F); 10-90% humidity, non-condensing.

Cooling: Convection cooling, no fan required.
Mounting: E8ANL-DIN: Black DIN mounting tray.

E8ANL-DIN-JBOX: Gray NEMA1 electrical enclosure with knockouts on 2

surfaces.
E8ANL-DIN-JBOX-PS: Gray NEMA1 electrical enclosure with knockouts

on 2 surfaces.
Size and weight: E8ANL-DIN: 5"l x 3.5”w x 2.5"h, 5.5 ounces.

E8ANL-DIN-JBOX: 12”l x 12”w x 4”h, 9 pounds.
E8ANL-DIN-JBOX-PS: 12”l x 12”w x 4”h, 10 pounds.

Warranty: Five years parts and labor. Interface must be returned to Doug Fleenor

Design for warranty repair. Shipping to Doug Fleenor Design is to be paid

by the customer. Return ground freight is paid by Doug Fleenor Design.

Warranty covers manufacturing defects.

Doug Fleenor Design, Inc.

396 Corbett Canyon Road
Arroyo Grande, CA 93420
[phone] voice and FAX
(888) 4-DMX512 toll free [phone]
web site: http://www.dfd.com
e-mail: [e-mail]