D O Tel DOTR 900 User Manual

Notice

1. This page uses HQ6301i firmware using the RFID module
Documentation is a demo program.

2. The demo application, the screen control part of the program, the
host control section, Controlled portion of the module and the
module control part consists of the UI.

3. Screen control part of MS Visual Studio 2005 using the project
wizard Was designed as a Dialog Based application.

4. Host-controlled portion of the host (or terminal) and the module
between the hardware and Protocol for controlling part.

5. Module control part for controlling the RFID module is a part.

6. UI control module part DOTR-900 bluetooth reader to control the
UI

Notice

Notice

1. This machine is for business (Grade A)with EMI, seller or user have
to be more careful with caution, you should use the purpose of using it
in areas outside the home.

2. This Radio facilities have possibility which is mixed to electric wave in
using.

3. This can't do life security and related services.

1

Index

Updates ……………………………………………………………………………………………1
Table of Contents ………………………………………………………………………………2

1. Before using ...

1.1 Basic Component …..…………………………………………………………………3

1.2 Name and function of each part …………………..…………………………….4

2. To use

2.1 Connecting to host ……………………………………………………………………5

2.2 Connect to smartphone ……………………………………………………………..7

2.3 Connect to Laptop & PC……………………………………………………………. 8

3. Using the RFID Host Program ………………………………………………………….9

4. More

4.1 Support and Information………………………………………………………….. 15

4.2 Product Specifications……………………………………………………………… 16

2

2

1. Before Using

1.1 Basic Accessories

…………………………………………………………………

DOTR-900 USB Data / Charging Cable Neck strap

Belt Clip

Notice

Notice

The products of the manufacturer's specifications and components may

change depending on circumstances.

Adaptor

3

1. Before Using

1.2 Name and function of each part

…………………………………………………………………

Swivel UHF

Antenna

Status LED

Trigger

Button

Power

Button

4

2. To Use

2. Smart Navi를 사용하기 전에

2.1 Connecting to host

…………………………………………………………………..

1) Power ON / OFF
(1) Power on - Press and hold the power switch turned on negative

behavior Sounds.
(2) power off - power is turned on, press and hold the power switch

back on Shut down the power is turned off 2 seconds after the tone.
(3) Auto-off - 5 minutes elapsed without any action, the ringing tone 10

seconds Alerts and then automatically turns off the power.

2) Pairing standby (Pairing ready mode)
To turn on the power stand-by status and the status of Pairing on the

lamp that noksaekbul Comes in flashes every two seconds.

3) connection
Pairing standby host and Bluetooth connections from Port

I hear sound notifications it receives the connection command.
(Connected with Bluetooth products available) 0.6 In this state, the

green lamp will blink every second.
In this state, the trigger button of the tag information to the

host Passes. Depending on the status of the host can make the
necessary commands.

Run the command received from the host state to change.

(The host running the application, one state)

5