D O Tel DOTH-300S Users Manual

시작하기 전에...

DOTH-300S User’s Manual

Before starting…

FCC NOTICE TO USERS:

FCC NOTICE TO USERS:
This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions.
(1) This device may not cause harmful interference and
(2) This device must accept any interference received, including interference that
may cause undesired operation.

IMPORTANT NOTE:
To comply with the FCC RF exposure compliance requirements, no change to the antenna or
the device is permitted. Any change to the antenna or the device could result in the device
exceeding the RF exposure requirements and void user's authority to operate the device.

During transmitter operation, in order to meet RF maximum permissible Exposure Safety
Guidelines, a minimum distance of 0cm shall be maintained between this device and
personnel.
This equipment may generate or use frequency energy. Changes or modifications to this
equipment may cause harmful interference unless the modifications are expressly approved
in the instruction manual. The user could lose the authority to operate this equipment if an
unauthorized change or modification is made.

시작하기 전에...

1. This user manual may be changed without notice in accordance with

improvements to the product or changes in available functions.

2. This user manual has been prepared based on information available at the

time of publishing and may have technical or editorial errors or omissions.

3. The screen and shape of the product in this manual may differ from that of

the actual product.

4. All the content of this manual is protected by Copyright Law.

5. All the rights for the software installed on this product belong to DOTel Co.,

Ltd. And are protected by Copyright Law.

6. Among the content specified in this manual, some functions may not be

installed in your PDA (Wireless LAN, Bluetooth)

This device complies with part 15 of the FCC rules.
Operation is subject to the following two conditions.
(1) This device may not cause harmful interference and
(2) This device must accept any interference received, including interference that
may cause undesired operation.

IMPORTANT NOTE:
To comply with the FCC RF exposure compliance requirements, no change to the antenna or
the device is permitted. Any change to the antenna or the device could result in the device
exceeding the RF exposure requirements and void user's authority to operate the device.

During transmitter operation, in order to meet RF maximum permissible Exposure Safety
Guidelines, a minimum distance of 0cm shall be maintained between this device and
personnel.
This equipment may generate or use frequency energy. Changes or modifications to this
e

quipment may cause harmful interference unless the modifications are expressly approved
in the instruction manual. The user could lose the authority to operate this equipment if an
unauthorized change or modification is made.

Consent on Copyright and Use…

1. All the contents in this manual and PDA software are protected by Copyright
Law and all the rights belong to DOTel Co., Ltd.

2. No part of this manual may be duplicated, renovated or translated into other
languages without a prior written consent. We notify you in advance that act
of duplicating, correcting or distributing this manual without permission will
be an object of criminal punishment in accordance with Copyright Law.

3. As to instructions for separate business programs not specified in this
manual, and questions about and after service for such programs, please
contact the software provider.

4. For all other application programs loaded separately onto this product except
the basic program, each product provider should specify contact information
required to make inquiries or ask for technical support on the product
manual or on the packing box, or enclose a separate manual with contact
information.

5. DOTel Co., Ltd. Does not provide any warranty for all the software units
loaded after PDAs are shipped out of the factory.

6. DOT is a trademark of DOTel Co., Ltd. protected by law.

7. The logos and product names, Microsoft, Windows and Internet
Explorer, are trademarks of Microsoft and MS Windows CE software
loaded in this product is a product officially licensed by Microsoft.

8. All the product names and program names used in this manual and the
product are company names, symbols, trademarks or registered
trademarks of each owner.

9. DOTel Co., Ltd. may ask the application program providers to provide
their software loaded in this product on request of mobile
communication providers or for improvement or verification of the
products.

1. Important Notices…

2. Before Using

2.1 Package Components

2.2 Product Description

2.3 To connect with a PC

3. User Interface

3.1 About the Home Screen

3.2 Title Bar Status Icons

4. Using the Phone

4.1 To use the phone function

4.2 To use the text message function

Table of Contents

5. Applications

5.1 Data communication Applications

5.2 Bluetooth Applications

6. Others

6.1 Problem solving

6.2 Guidance on customer support and after service

6.3 Product Warranty

6.4 Communication and Product Specification

6.5 System Product Specification

1. Important Notices…

Do not use the product while driving. Be sure to observe traffic related laws as,

!!

otherwise, it may cause a car accident.

Be sure to carefully read this user manual as not observing the cautions may cause
injury of the user or other persons, or physical losses.

The manufacturer and seller do not take any responsibilities for all the accidents
occurred due to not observing the cautions specified in this manual.

This product should be used only for the established purpose. Do not use the
product for other purposes than those specified in the user manual.

Be careful not to hurt your hands when handling the product box, manual and
component parts.

If there is smell of burn or excessive heat from the product while in use, remove
the battery and immediately contact the after service center guided in this manual.

Be sure to use the product in a bright place to protect your eyesight, as looking into
the LCD screen in a dark place for a long period of time may hurt your eyesight.

We recommend you to back up important data in this product without fail. The
seller and manufacturer do not take any responsibility for data loss. Especially,
when you ask for repair of the product, be sure to back up the data. The
manufacturer and seller as well as the after service center do not take any
responsibility for data loss.

Do not place the product near magnets or magnetic fields. It may cause failure of
the product.

1. Important Notices…

Do not handle the product with wet hands as it may cause malfunction of the
product and, especially, if the AC adapter is handled with wet hands, there is a risk
of electric shock.

!!

Use the LCD screen with a stylus pen provided by the manufacturer or a tool not
pointed. Otherwise, the LCD may be damaged.

The film attached on the LCD is a film used to protect the LCD. If the product is
used with the film on, accurate operation may not be achieved. Be sure to use the
product after replacing the film with the LCD protection film separately provided.

When using USB cable, adapter and snap-on, be careful with the direction of
connector insertion. If it is inserted the other way around, it may cause a problem
for PDA or PC. Also, do not use extremely bent or pressed by heavy object cable.

The product may not properly operate in very cold winter or hot summer. The
proper operating temperature is between -10ºC ~ 50ºC. Be especially careful to
avoid storing the product in a place too hot or cold, or too moist. This may cause
external change or product damage.

In following cases, warranty service will not provided or repairing may be
impossible:

-If the product has been disassembled or remodeled by user’s self;

-If the product has fallen into the water or stored in a moist place for
a long period of time;

-If the product has been dropped from a high place or received
excessive external shock.

Charge the battery fully for at least 30 minutes or longer before using the product
for the first time. The product may not turn on before the battery is charged.