Dormont R325P32-0711-11 User Manual

For Commercial Applications
R325P32-0711-11_R625P42-0711-11
Job Name
Job Location
Engineer
Approval
–––––––––––––––––––––––––––––––––––––––––––
–––––––––––––––––––––––––––––––––––––––––
–––––––––––––––––––––––––––––––––––––––––––––
–––––––––––––––––––––––––––––––––––––––––––––
Contractor
Approval
––––––––––––––––––––––––––––––––––––––––––––
–––––––––––––––––––––––––––––––––––––––––––––
Contractor’s P.O. No.
Representative
SKU
–––––––––––––––––––––––––––––––––––––––––––––––––
––––––––––––––––––––––––––––––––––––––––
––––––––––––––––––––––––––––––––––
LP Gas Line Regulator
R325P32-0711-11 (2 PSIG Gas System)
½" NPT Female X ½" NPT Female
R625P42-0711-11 (2 PSIG Gas System)
¾" NPT Female X ¾" NPT Female
Line pressure regulators for 2 psi piping systems for use on residential, commercial and industrial applications. Features a high leverage linkage assembly to deliver positive dead-end lock-up. The regulators are capable of precise regulating control from full flow down to pilot flow. Housings are high strength aluminum castings and all models are suitable for multi-positional mounting. If ball check vent limiting device is installed, mount in an upright position only.
R325P32-0711-11_R625P42-0711-11
Technical Data
Item CapaCIty maX IND. LOaD maX INLet pressure TemperaTure LimiTs sprING raNGe sprING set pOINt DesIGN CertIfICatIONs
R325P32-0711-11 400,000 225,000
(BTU/HR) (BTU/HR) PSI (kPa) Degrees Fahrenheit " WC " WC CSA (C and US)
R625P42-0711-11 970,000 685,000
2 (13.8) 2 (13.8)
-40 to 205 7 - 11 11 ANSI Z21.80/CSA 6.22
-40 to 205 7 - 11 11 ANSI Z21.80/CSA 6.22
(2 PSIG Gas System)
Vent Limiting Device #12A09
1
⁄8" NPT
1
⁄2" NPT (TYP.)
R625P42-0711-11 (2 PSIG Gas System)R325P32-0711-11 (2 PSIG Gas System)
Vent Limiting Device #12A39
3
⁄8" NPT
3
⁄4" NPT (TYP.)
NOTICE
Vent limiting devices are designed for use indoors and in spaces where limiting the amount of gas escapement due to diaphragm failure is critical. Vent limiting devices should not be used out-
doors if they are exposed to the environment. Vent protectors
are available for all outdoor applications to ensure proper vent protection. 13A15 (
Maxitrol Regulator distributed by Dormont. Models 325-3L and 325-5L Series Lever Acting Design.
Dormont product specifications in U.S. customary units and metric are approximate and are provided for reference only. For precise measurements, please contact Dormont Technical Service. Dormont reserves the right to change or modify product design, construction, specifications, or materials without prior notice and without incurring any obligation to make such changes and modifications on Dormont products previously or subsequently sold. Refer to the owner's manual for warranty information.
1
⁄8" NPT) and 13A15-5 (3⁄8" NPT).
USA: Tel: (800) 367-6668 • Fax: (724) 733-4808 • Dormont.com Canada: Tel: (905) 332-4090 • Fax: (905) 332-7068 • Dormont.ca Latin America: Tel: (52) 81-1001-8600 • Fax: (52) 81-8000-7091 • Dormont.com
R325P32-0711-11_R625P42-0711-11 1610 © 2016 Dormont
A Watts Water Technologies Company
Loading...