Dormont Gas Shut-Off Valves Installation Manual

21
1-800-DORMONT
www.dormont.com
92ST-3232 1/2'' FIP x 1/2'' FIP 10 4.5 $33.33 92ST-4242 3/4'' FIP x 3/4'' FIP 10 5.7 43.26
92-2222 3/8'' FIP x 3/8'' FIP 10 3.0 $23.91 92-3232 1/2'' FIP x 1/2'' FIP 10 3.6 23.91 92-4242 3/4'' FIP x 3/4'' FIP 10 5.5 31.14
91-1032 3/8'' OD Flare x 1/2'' FIP 10 3.7 $28.05 91-2032 1/2'' OD Flare x 1/2'' FIP 10 4.0 28.05 91-3032 5/8'' OD Flare (15/16'' - 16 thread) x 1/2'' FIP 10 4.5 30.65 91-3042 5/8'' OD Flare (15/16'' - 16 thread) x 3/4'' FIP 10 5.8 39.37
Approx. Carton
Wt. Lbs.
Description
Part #
Straight Valves - FIP x FIP (Reduced Port)
Carton
Qty.
Price
Each Piece
Description
Part #
Full Port Valves - FIP x FIP
94-3232 1/2'' FIP x 1/2'' FIP 10 5.1 $29.37 94-4242 3/4'' FIP x 3/4'' FIP 10 7.5 43.12 94-5252 1'' FIP x 1'' FIP 6 7.8 61.83 94-6262 1-1/4'' FIP x 1-1/4'' FIP 6 11.6 100.78 94-7272 1-1/2'' FIP x 1-1/2'' FIP 6 15.7 136.06 94-8282 2'' FIP x 2'' FIP 2 8.0 200.87
Carton
Qty.
Connector Valves - Flare x FIP
Price
Each Piece
Approx. Carton
Wt. Lbs.
Straight Valves - FIP x FIP (Side Tapped)
Approx. Carton
Wt. Lbs.
Description
Part #
Carton
Qty.
Price
Each Piece
Approx. Carton
Wt. Lbs.
Description
Part #
Carton
Qty.
Price
Each Piece
Easy to Use Handle
• Handles are ergonomically designed for smooth turns.
• Quarter-turn handle design makes for easy on/off operation.
• Most handles feature a lock-out for added safety.
Easier Installation
• Large octagon wrench flats allow for quick, easy installation.
Reliable Long-Lasting Performance
• The forged brass body eliminates the possibility of leaks associated with cast products.
• All valves are 100% leak tested.
• Valves are approved and design-certified by CSA for use with natural, manufactured, mixed liquefied petroleum gases, and LP gas-air mixtures.
IMPORTANT: The National Fuel Gas Code (ANSI Z223.1) requires each outlet, including a valve, be closed gas tight with a threaded plug or cap immediately after installation and until equipment is connected, and when equipment is disconnected from an outlet and the outlet is not to be used again immediately.
91-1010 3/8'' OD x 3/8'' OD 10 3.6 $27.52 91-2020 1/2'' OD x 1/2'' OD 10 3.9 27.52
Flare Valves - Flare x Flare
Approx. Carton
Wt. Lbs.
Description
Part #
Carton
Qty.
Price
Each Piece
22
1-800-DORMONT www.dormont.com
Gas Shut-Off Valves
Category D Fuel Gas Outlets
91ST-1010 3/8'' OD x 3/8'' OD 10 3.5 $38.10
Description
Part #
Flare Valves - Flare x Flare Side Tapped
Carton
Qty.
Approx. Carton
Wt. Lbs.
Price
Each Piece
93-1032 3/8'' OD Flare x 1/2'' FIP Angle 10 5.1 $37.52 93-2032 1/2'' OD Flare x 1/2'' FIP Angle 10 5.3 45.64 93-3032 5/8'' OD Flare (15/16'' - 16 thread) x 1/2'' FIP Angle 10 5.6 56.46 93-3042 5/8'' OD Flare (15/16'' - 16 thread) x 3/4'' FIP Angle 10 6.0 71.20
Angle Connector Valves - Flare x FIP
Part # Description Price
961-2234
Model 961 Fuel Gas Outlet Connection with 1/2'' NPT (F)
$134.74
90 deg. inlet and plug with 3/8'' NPT (F) outlet
961-3422C
Model 961 Fuel Gas Outlet Connection with 1/2'' NPT (F)
124.67
90 deg. inlet coupler
961-2122N
Model 961 Fuel Gas Outlet 3/8'' NPT (F) plug
17.09
961-2021N Model 961 Fuel Gas Outlet 1/2'' OD (M) flare plug 17.09
• Easy and safe operation. When the manual valve is in the closed (OFF) position, to make a connection, the user simply pushes back the locking sleeve, inserts the appliance connector plug, and releases the sleeve. No tools are required for a leak-tight connection.
• Gas flows when the manual valve handle is turned to the open (ON) position.
• An interlocking safety cam prevents release of the appliance connector plug until the manual valve handle is in the closed (OFF) position.
• Capacity–42,000 BTU/HR. minimum at 0.3'' w.c. pressure drop; 0.64 SG., natural gas.
• National Fuel Gas Code Reference 5.5.6.
• Temperature Protected—Built-in thermal protection prevents gas flow if the gas connection is exposed to temperatures in excess of 200°F.
• To be used with Natural or Propane Gas.
Fuel Gas Outlet – Model 961 For Indoor and Outdoor Installations
Description
Part #
Carton
Qty.
Approx. Carton
Wt. Lbs.
Price
Each Piece
IMPORTANT: The National Fuel Gas Code (ANSI Z223.1) requires each outlet, including a valve, be closed gas tight with a threaded plug or cap immediately after installation and until equipment is connected, and when equipment is disconnected from an outlet and the outlet is not to be used again immediately.
Fuel Gas Outlet Features:
Loading...