Dormont 40C User Manual

Download

Page 1

NEW WATER

SECTIO

DUCTS

FEATURING

Stainless Steel

Gas Appliance

Connectors

& Accessories

R908

Page 2

The First and Only COMPLETE Gas Equipment Connection System

Stainless Steel Gas Connectors

Durable, naturally corrosion-resistant 304 stainless steel gas

See pages 3-7 for more information

See pages 8-10 and16 for more information

See pages 11-12 for more information

See pages 14-16 for more information

connectors for indoor or outdoor stationary appliance applications

Coated Stainless Steel Gas Connectors

Safety Shield®coating provides easy gas line identification and extra

protection from chemical corrosion from accidental contact with

ousehold chemicals. Consistent coverage provides protection

High-Temperature Black Epoxy Coating

Specifically engineered for high-temperature applications such as

Features a low-visibility coating that helps hide the connector from view.

gas logs, fireplace inserts and free-standing fireplaces.

High BTU Stainless Steel Gas Connectors

Stainless steel gas connectors 1'' OD to 1-1/2'' OD. Available with

hot-dipped, heavy-duty gray PVC coating, or Safety Shield yellow

coating for indoor and outdoor high BTU applications and manufactured

home cross-over connections requiring the highest level of protection

range in size from 3/8'' OD to 5/8'' OD.

along the entire length of the connector.

Stainless Steel Gas Connectors with

from environmental factors.

See page 17 for more information

See pages 19-24 for more information

See our Foodservice Catalog for more details

15 PSIG Stainless Steel Gas Connectors

Designed for outdoor, above-ground use, this gas connector is a

safe and easy alternative to typical copper polyethylene connectors for

the connection of propane tanks. This connector is rated to 15 PSIG–all other

connectors are approved under ANSI Z21.24 to 1/2 PSIG.

Fittings, Valves and Regulators

We offer CSA listed valves, regulators and other fittings to

Commercial Foodservice Gas Connectors and Safety Fittings

Specifically engineered for commercial cooking equipment, the Dormont Safety

Stress Guard

™

System

your gas connection and extend the service life of your gas connector.

Blue HoseTMfeatures antimicrobial PVC coating and patented

™

technology. We also offer a selection of accessories to complete

complete a code compliant installation.

1-800-DORMONT www.dormont.com

Page 3

Dormont’s Guiding Principles

Safety

As the inventor and leading manufacturer of safe, high quality stainless steel gas connectors, Dormont has earned the reputation as the expert in the gas connection business. We have a proven performance record that spans almost 60 years – with more than 75 million safe installations worldwide, industry professionals ask for Dormont by name. Our dedication, reputation and history are why Dormont is known for “Setting the Standard in Gas SafetyTM.”

Customer Focus

The success of our company is based on listening to our customers, understanding their needs and developing products and services that meet or exceed their requirements. We work in a collaborative manner with our customers and supply chain partners to develop innovative, effective solutions.

Value Creation

Providing high quality products, great service and competitive pricing is a requirement in today's challenging business world. Beyond the basics, companies that provide superior service, creative ideas and innovative new products that exceed customer expectations will earn the right to be a trusted "Supply Chain Partner." We are focused on performing the fundamentals flawlessly and then providing engineering and technical support, marketing and merchandising expertise and performance improvement ideas for our customers.

Continuous Improvement

Our ability to meet our customers' needs in the future is predicated on our ability to continuously improve the capabilities, knowledge and performance of our company. Our commitment to continuous improvement is affirmed through ongoing projects that utilize Six Sigma and Lean Concepts to upgrade our business processes throughout the supply chain to work smarter and more effectively.

Quality

Quality is the number one priority at Dormont. As an ISO 9001:2000 registered manufacturer, we utilize a Quality Business System to drive our commitment to continuous improvement. Dormont's safe, high quality products are design certified by the leading testing agencies based on a wide range of global standards. Beyond our prestigious certifications, our quality is driven by one idea: Make every product as if it were going to be installed in your own home or business.

People

We believe in hiring, developing and retaining superior staff, treating them with respect and creating a positive, challenging, supportive, rewarding and safe work environment. We believe in empowerment of our employees with shared goals and direction.

Integrity

Integrity guides all of our actions. We've built our company by acting with integrity, honesty and fairness in our relationships with all of our employees, customers, suppliers and constituents. We do what we say we will do, and we remain trustworthy in all matters.

Leadership

Dormont is an industry leader in product innovation, industry participation and pioneering creative marketing programs. As the inventor of both the stainless steel and quick disconnect gas connectors, Dormont has helped revolutionize the gas connector category. We have played a lead role in the ongoing development of industry standards throughout the world, always with an emphasis on safety. Dormont has also introduced many innovative products, services and programs that have helped create value for our customers.

Passion

"People don't care how much you know - until they know how much you care!" These powerful words epitomize our business. "Passionate care" for our customers is a core value that is the Dormont culture. Everyone at Dormont cares deeply about our customers - and we strive to ensure that this passion is evident through all of our action

1-800-DORMONT www.dormont.com

Page 4

Part Numbering System

Gas Connectors

EXAMPLE: Characters:

tio

Character 1: Diameter of connector (choose one)

Part #

1 3/8'' OD (1/4'' ID) 2 1/2'' OD (3/8'' ID) 3 5/8'' OD (1/2'' ID) 4 1'' OD (3/4'' ID) 5 1-1/4'' OD (1'' ID) 6 1-1/2'' OD (1-1/4'' ID)

Character 2: Coating

Part #

O Corrugated Tubing OA Low-visibility Black OC Safety Shield Yellow Epoxy

1 Hot-Dipped Gray PVC Coating

1P 15 PSIG Connector with Hot-Dipped,

Characters 3 & 4: Choice of fitting or valve for both ends of connector (choose two)

Part #

21 3/8'' MIP (Tapped 1/4'' FIP) 22 3/8'' FIP 23 3/8'' MIP Elbow 24 3/8'' FIP Elbow

31 1/2'' MIP (Tapped 3/8'' FIP) 32 1/2'' FIP 33 1/2'' MIP Elbow 34 1/2'' FIP Elbow 35 1/2'' FIP Straight Connector Valve 36 1/2'' FIP Angle Connector Valve

41 3/4'' MIP (Tapped 1/2'' FIP) 42 3/4'' FIP 43 3/4'' MIP Elbow 44 3/4'' FIP Elbow 45 3/4'' FIP Straight Connector Valve 46 3/4'' FIP Angle Connector Valve

51 1'' MIP (Tapped 3/4'' FIP) 52 1'' FIP

61 1-1/4'' MIP (Tapped 1'' FIP) 62 1-1/4'' FIP

98 Nut Only

30 C 31 32 48

1 2 3 4 5

)

' I

llo

(

d Tu

ld y

2''

Gray PVC Coating

(

apped

Fittings and Gas Shut-off Valves

XAMPLE:

in le

Characters:

on:

Character 1: Style of accessory (fitting or valve)

Part #

90 Fitting

91 Connector Valve

92 Straight Valve

93 Angle Connector Valve

94 Full Port Valve

95 Elbow

Characters 2 & 3: Choice of fitting or valve for both ends of connector (choose two)

Part #

10 3/8'' OD Flare

20 1/2'' OD Flare 21 3/8'' MIP (Tapped 1/4'' FIP) 22 3/8'' FIP 30 5/8'' OD Flare (15/16''-16 Thread) 31 1/2'' MIP (Tapped 3/8'' FIP) 32 1/2'' FIP

40 1'' OD Flare 41 3/4'' MIP (Tapped 1/2'' FIP) 42 3/4'' FIP

50 1-1/4'' OD Flare 51 1'' MIP (Tapped 3/4'' FIP) 52 1'' FIP

60 1-1/2'' OD Flare 61 1-1/4'' MIP (Tapped 1'' FIP) 62 1-1/4'' FIP

72 1-1/2'' FIP

82 2'' FIP

90 30 31

1 23

)

6 t

e (

)

d 3

(

Character 5: Nominal length in inches. (choose one)

12 18 24 30 36 48 60 72

Note: For poly-bagged connectors, consult Dormont for pricing.

1-800-DORMONT

www.dormont.com

Page 5

Table of Contents

Price

Description Page Category Multiplier

Range Connectors

Uncoated Stainless Steel Nut by Nut Connectors 31 Series Heavy-Duty, Hot-Dipped PVC Coating

Dryer Connectors

Uncoated Stainless Steel Nut by Nut Connectors 21 Series Heavy-Duty, Hot-Dipped PVC Coating

Water Heater, Gas Logs and Wall Heater Connectors

Nut by Nut Connectors

Safety Shield

Yellow Epoxy Coated Connectors

Range, Dryer, Water Heater A

7AUncoated Stainless Steel

8-10

Low-Visibility®Stainless Steel Gas Hearth Connectors

with High-Temperature Black Epoxy Coating

11-12 A

Gas Appliance Installation Kits 13 A

High BTU Stainless Steel Gas Connectors

ULTRAflow

, Safety Shield, Uncoated

14-16 B

15 PSIG Propane (LP) Stainless Steel Gas Connectors 17 A

Manufactured Home Gas Connector Kits 18 B

Gas Flare Fittings 19-20 C

Gas Shut-Off Valves 21-22 D

Fuel Gas Outlets 22 D

Gas Regulators 23-24 E

Tankless Water Heater Service Valves 25

NEW!

Copper Water Heater Connectors and Kits 26 F

Water Supply Line Installation Kits 27 F

PowerForce

Pre-Rinses, Faucets, and Drains 28

NEW!

Terms and Conditions 29

Warranty 30

Certifications 31

Distributor Merchandising and Retail Packaging Inside

Back Cover

1-800-DORMONT www.dormont.com

Prices effective 5-14-2007

Page 6

Stainless Steel Gas Connectors

Features, Benefits and Applications

Durable, corrosion–resistant stainless steel tubing

Markings stamped on the nut

ot on an ID ring. This eliminates any vibration noise.

Design certified

domestically and internationally for indoor

and outdoor use.

Safety and quality

Consistent quality ensures a safe

product you can trust.

Exclusive No-Neck®design

ncreases tubing flexibility.

Quality flared end fittings

create a metal to metal seal to ensure integrity

in critical applications.

100% leak tested.

Features Benefits

304 stainless steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Durable, corrosion-resistant construction

No Neck

Markings stamped on nut not an ID ring . . . . . . . . . . . Eliminates any noise from vibration

Full solution annealing at 2000º F . . . . . . . . . . . . . . . . . Provides tremendous strength and flexibility and reduces the risk of stress corrosion cracking

Quality flared end fittings . . . . . . . . . . . . . . . . . . . . . Creates a metal to metal seal to ensure integrity in critical applications.

CSA Design Certified domestically and . . . . . . . . . . . . . Safety and Quality

internationally for indoor and outdoor use with natural, manufactured, mixed, liquefied petroleum (LP) and LP-gas air mixtures.

design. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Increases flexibility

Ordinary connector neck

Dormont No-Neck

Indoor

CSA Design Certified under ANSI Z21.24/CSA 6.10, Dormont connectors are durable, flexible and easy to install, even in tight places. Designed with the safety of your home in mind, these connectors can be used for installation of all of the gas appliances throughout your home.

• Range • Furnace

• Dryer • Wall Heater

• Water Heater • Gas Fireplaces

• Gas Logs

Construction

Outdoor

CSA Design Certified under ANSI Z21.75/CSA 6.27 for gas connectors for the connection of fixed appliances for outdoor installation to the gas supply.

• Rooftop Units

• Outdoor Dryer

• Stationary Outdoor Grills

• Gas Fire Pits

Dormont’s No-Neck®Design

With ordinary connectors, the tubing’s straight neck enters the nut, and after being subjected to flexing, they may develop cracks that can result in a gas leak.

The Dormont No-Neckdesign reduces this danger because the first few tubing corrugations are enclosed within the nut. This results in increased tubing flexibility.

Manufactured Home

CSA Design Certified under ANSI Z21.75/CSA 6.27 for gas connectors for the connection of park trailers and manufactured (mobile) homes to the gas supply. Large BTU capacity assures proper gas flow. Optional hot-dipped gray PVC coating provides added protection against weather and atmospheric conditions.

• Mobile Home Gas Meter

• Cross-over Gas Connection Kits

High BTU

CSA Design Certified under ANSI Z21.24/CSA 6.10, Dormont High BTU connectors ensure that gas appliances operate at their peak performance at all times. Refer to the BTU chart provided on page 9 for specifics.

• Commercial Water Heaters

• High-capacity furnaces

• Boilers

• Tankless water heaters

• Up to 1.5 million BTUs

• 1'' OD, 1-1/4'' OD and 1-1/2'' OD

1-800-DORMONT www.dormont.com

Page 7

Stainless Steel Gas Connectors Specification Sheet

Applications

Indoor

• Range Dryer

•

• Water Heater

• Gas Fireplace

• Garage Heater

• Wall Heater

• Tankless Water Heater

• Furnace

Connector Minimum Flow Capacity – For Natural Gas (per ANSI Z21.24/CSA 6.10 & ANSI Z21.75/CSA 6.27)

Straight Length Capacity – BTU per Hr 0.64 SG., 1000 BTU per Cu. Ft. at 0.5 inch Water Column (124 Pa) Pressure Drop

Nominal Nominal

Series OD (in) ID (in) 12'' 18'' 24'' 30'' 36'' 48'' 60'' 72''

10 3/8'' 1/4'' 48,000 43,800 40,000 36,400 33,400 28,300 24,900 23,100

20 1/2'' 3/8'' 102,000 93,100 85,000 77,100 71,100 60,500 53,200 49,100

30 5/8'' 1/2'' 180,000 164,200 150,000 136,000 125,000 106,000 93,200 86,000

Connector Minimum Flow Capacity – For Propane Gas (per ANSI Z21.24/CSA 6.10 & ANSI Z21.75/CSA 6.27)

Straight Length Capacity – BTU per Hr 1.55 SG., 2500 BTU per Cu. Ft. at 0.5 inch Water Column (124 Pa) Pressure Drop

Nominal Nominal

Series OD (in) ID (in) 12'' 18'' 24'' 30'' 36'' 48'' 60'' 72''

10 3/8'' 1/4'' 76,800 70,080 64,000 58,240 53,440 45,280 39,840 36,960

20 1/2'' 3/8'' 163,200 148,960 136,000 123,360 113,760 96,800 85,120 78,560

30 5/8'' 1/2'' 288,000 262,720 240,000 217,600 200,000 169,600 149,120 137,600

Note: When using 0.2 water column pressure drop, capacity can be determined by multiplying the values above by 0.632 (for both natural and propane gas). For capacities at other than noted, contact Dormont at 1-800-DORMONT.

Outdoor

• Rooftop Units Outdoor Dryer

•

• Stationary Outdoor Grills

• Gas Fire Pits

Manufactured Home

• Mobile Home Gas Meter

• Cross-over Gas Connection Kits

Design Certifications and Approvals Features and Specifications

• ANSI Z21.24/CSA 6.10 – Connectors for Gas Appliances

• ANSI Z21.75/CSA 6.27 – Connectors for Outdoor Appliances and Manufactured Homes

• City of New York – MEA #376-92-M

• Approved by the Commonwealth of Massachusetts Board of State

Examiners of Plumbers and Gas Fitters –

exceed 36''.

ALL INSTALLATIONS MUST COMPLETELY COMPLY WITH ALL DORMONT MANUFACTURING COMPANY WARNINGS AND INSTRUCTIONS, NATIONAL, STATE AND LOCAL CODES AND ALL APPLICABLE ANSI STANDARDS.

1-800-DORMONT

www.dormont.com

connector length may not

• Tubing . . . . . . . . . . . . . Annealed, 304 stainless steel (ASTM A240)

• Flare nuts . . . . . . . . . . Brass or plated steel

• Adapters . . . . . . . . . . . Brass or plated steel

• Optional coating . . . . . Heavy-duty, antimicrobial, hot-dipped gray PVC

• Approved for indoor and outdoor use

• Temperature rating with adapters: -40°F to 150°F

• Temperature rating with valves: -40°F to 125°F

• 100% Factory leak tested

•

When installing a new appliance or when an existing appliance is moved to a new location a NEW gas connector must be used per manufacturer’s installation instructions and per product standards ANSI Z21.24/CSA 6.10 and ANSI Z21.75/CSA 6.27.

• Avoid repeated bending, flexing, or extreme vibration. Do not use on generators due to excessive vibration.

Meets SAE J512 standard – 45° flare (with the exception of 15/16'' – 16 threads of 5/8'' OD)

(for 1/2'' OD (21 series) and 5/8'' OD (31 series only). Coating will not hold a flame.

Page 8

Range Connectors

Category A 30 Series - 5/8'' OD (1/2'' ID)

Range Connectors with Fittings

Not for use in Foodservice applications where movement is required for cleaning. Use an ANSI Z21.69 design certified gas connector.

Contact Dormont for more information.)

(

Length (When ordering, add length after the part number)

Description

3/4'' MIP x 3/4'' MIP 30-4141- $24.56 $29.85 $34.25 $35.85 $39.09 $49.80 $59.58 $69.07 1/2'' MIP x 3/4'' MIP 30-3141- 24.56 29.85 34.25 35.85 39.09 49.80 59.58 69.07 1/2'' MIP x 1/2'' MIP 30-3131- 24.56 29.85 34.25 35.85 39.09 49.80 59.58 69.07

3/4'' FIP x 3/4'' FIP 30-4242- 24.56 29.85 34.25 35.85 39.09 49.80 59.58 69.07

/2'' FIP x 3/4'' FIP 30-3242- 24.56 29.85 34.25 35.85 39.09 49.80 59.58 69.07

1 1/2'' FIP x 1/2'' FIP 30-3232- 24.56 29.85 34.25 35.85 39.09 49.80 59.58 69.07

1/2'' MIP x 1/2'' FIP 30-3132- 24.56 29.85 34.25 35.85 39.09 49.80 59.58 69.07 1/2'' MIP x 3/4'' FIP 30-3142- 24.56 29.85 34.25 35.85 39.09 49.80 59.58 69.07 3/4'' MIP x 1/2'' FIP 30-4132- 24.56 29.85 34.25 35.85 39.09 49.80 59.58 69.07 3/4'' MIP x 3/4'' FIP 30-4142- 24.56 29.85 34.25 35.85 39.09 49.80 59.58 69.07

3/4'' MIP x 3/4'' FIP (Elbow) 30-4144- 30.09 35.26 39.55 40.95 44.21 54.89 64.66 74.16

Carton Qty./Approx. Carton Wt. Lbs. 25/24 25/26 25/27 25/29 25/31 25/34 12/20 12/20

Range Connectors with Valves

Description

3/4'' FIP x 3/4'' FIP Ball 30-4245- $53.60 $59.83 $63.73 $64.06 $68.11 $79.00 $90.20 $100.32 1/2'' FIP x 3/4'' FIP Ball 30-3245- 53.60 59.83 63.73 64.06 68.11 79.00 90.20 100.32 3/4'' FIP x 1/2'' FIP Ball 30-4235- 53.60 59.83 63.73 64.06 68.11 79.00 90.20 100.32 1/2'' FIP x 1/2'' FIP Ball 30-3235- 53.60 59.83 63.73 64.06 68.11 79.00 90.20 100.32

3/4'' MIP x 3/4'' FIP Ball 30-4145- 53.60 59.83 63.73 64.06 68.11 79.00 90.20 100.32 1/2'' MIP x 3/4'' FIP Ball 30-3145- 53.60 59.83 63.73 64.06 68.11 79.00 90.20 100.32 3/4'' MIP x 1/2'' FIP Ball 30-4135- 53.60 59.83 63.73 64.06 68.11 79.00 90.20 100.32 1/2'' MIP x 1/2'' FIP Ball 30-3135- 53.60 59.83 63.73 64.06 68.11 79.00 90.20 100.32

3/4'' FIP x 3/4'' FIP Angle 1/2'' FIP x 3/4'' FIP Angle

3/4'' MIP x 3/4'' FIP Angle

1/2'' MIP x 3/4'' FIP Angle

Carton Qty./Approx. Carton Wt. Lbs. 25/29 25/31 25/33 25/35 25/37 25/40 12/23 12/23

Part #

30-4246- 77.25 82.02 85.45 87.31 89.17 99.88 111.17 121.33 30-3246- 77.25 82.02 85.45 87.31 89.17 99.88 111.17 121.33

30-4146- 77.25 82.02 85.45 87.31 89.17 99.88 111.17 121.33

30-3146- 77.25 82.02 85.45 87.31 89.17 99.88 111.17 121.33

12'' 18'' 24'' 30'' 36'' 48'' 60'' 72''

Length (When ordering, add length after the part number)

12'' 18'' 24'' 30'' 36'' 48'' 60'' 72''

Coated Connectors – 31 Series with Heavy-Duty Gray PVC Coating

• Heavy-duty, hot dipped PVC coating provides protection against weather, UV, chemicals and other physical abuses.

• Antimicrobial agent prohibits the growth of mold and mildew. (Patent pending)

Length (When ordering, add length after the part number)

Description

5/8'' OD (1/2'' ID) tube with 31-3132- $51.26 $54.33 $59.14 $75.79 $90.31 $104.95 1/2'' MIP x 1/2'' FIP Fittings

Carton Qty./Approx. Carton Wt. Lbs. 25/24 25/27 25/30 25/45 12/25 12/28

Note: 30 series gas connectors have special 15/16'' - 16 threads required for CSA design certification. Note: For poly-bagged connectors, consult Dormont for pricing.

Part # 24'' 30'' 36'' 48'' 60'' 72''

Nut By Nut Connectors (NOT CSA DESIGN CERTIFIED)

Length (When ordering, add length after the part number)

Description

5/8'' OD (1/2'' ID) tube with 5/8'' OD flare nuts (15/16''-16 thread)

Carton Qty./Approx. Carton Wt. Lbs. 25/7 25/9 25/10 25/12 25/14 25/17 12/10 12/11

Part #

30-9898- $21.23 $25.01 $28.69 $30.11 $33.12 $42.02 $50.04 $58.30

10'' 16'' 22'' 28'' 34'' 46'' 58'' 70''

1-800-DORMONT www.dormont.com

Page 9

Dryer Connectors 20 Series - 1/2'' OD (3/8'' ID) Category A

Dryer Connectors with Fittings

When ordering, add length after the part number)

Description

3/8'' MIP x 3/8'' MIP 20-2121- $23.67 $28.66 $32.73 $35.06 $38.62 $46.76 $57.45 $65.42 1/2'' MIP x 1/2'' MIP 20-3131- 23.67 28.66 32.73 35.06 38.62 46.76 57.45 65.42 3/8'' MIP x 1/2'' MIP 20-2131- 23.67 28.66 32.73 35.06 38.62 46.76 57.45 65.42

/8'' FIP x 3/8'' FIP 20-2222- 23.67 28.66 32.73 35.06 38.62 46.76 57.45 65.42

3 1/2'' FIP x 1/2'' FIP 20-3232- 23.67 28.66 32.73 35.06 38.62 46.76 57.45 65.42 3/8'' FIP x 1/2'' FIP 20-2232- 23.67 28.66 32.73 35.06 38.62 46.76 57.45 65.42

3/8'' MIP x 3/8'' FIP 20-2122- 23.67 28.66 32.73 35.06 38.62 46.76 57.45 65.42 3/8'' MIP x 1/2'' FIP 20-2132- 23.67 28.66 32.73 35.06 38.62 46.76 57.45 65.42 1/2'' MIP x 3/8'' FIP 20-3122- 23.67 28.66 32.73 35.06 38.62 46.76 57.45 65.42 1/2'' MIP x 1/2'' FIP 20-3132- 23.67 28.66 32.73 35.06 38.62 46.76 57.45 65.42

Carton Qty./Approx. Carton Wt. Lbs. 25/16 25/18 25/19 25/21 25/22 25/26 12/14 12/16

Dryer Connectors with Valves

Description

1/2'' MIP x 1/2'' FIP Ball 20-3135- $45.10 $50.12 $54.08 $55.66 $59.62 $68.85 $80.32 $88.44 3/8'' MIP x 1/2'' FIP Ball 20-2135- 45.10 50.12 54.08 55.66 59.62 68.85 80.32 88.44

1/2'' FIP x 1/2'' FIP Ball 20-3235- 45.10 50.12 54.08 55.66 59.62 68.85 80.32 88.44 3/8'' FIP x 1/2'' FIP Ball 20-2235- 45.10 50.12 54.08 55.66 59.62 68.85 80.32 88.44

Part #

Length (

12'' 18'' 24'' 30'' 36'' 48'' 60'' 72''

Length (When ordering, add length after the part number)

12'' 18'' 24'' 30'' 36'' 48'' 60'' 72''

Carton Qty./Approx. Carton Wt. Lbs. 25/23 25/25 25/26 25/28 25/29 25/33 12/17 12/19

Note: For poly-bagged connectors, consult Dormont for pricing.

Coated Connectors – 21 Series with Heavy-Duty Gray PVC Coating

• Heavy-duty, hot dipped PVC coating provides protection against weather, UV, chemicals and other physical abuses.

• Antimicrobial agent prohibits the growth of mold and mildew. (Patent Pending)

Length (When ordering, add length after the part number)

Description

1/2'' OD (3/8'' ID) tube with 3/8'' MIP x 3/8'' FIP Fittings

Carton Qty./Approx. Carton Wt. Lbs. 25/24 25/27 25/30 25/45 12/25 12/28

Part# 24'' 30'' 36'' 48'' 60'' 72''

21-2122- $48.81 $53.04 $58.34 $70.95 $86.92 $99.12

Nut By Nut Connectors (NOT CSA DESIGN CERTIFIED)

Length (When ordering, add length after the part number)

Description

1/2'' OD (3/8'' ID) tube with 1/2'' OD flare nut

Carton Qty./Approx. Carton Wt. Lbs. 25/5 25/6 25/8 25/9 25/11 25/14 12/8 12/9

Part # 10'' 16'' 22'' 28'' 34'' 46'' 58'' 70''

20-9898- $16.34 $21.00 $24.73 $27.25 30.47 $38.03 $47.88 $55.24

1-800-DORMONT

www.dormont.com

Page 10

Water Heater, Gas Log and Wall Heater Connectors

Category A 10 Series - 3/8'' OD (1/4'' ID)

Water Heater, Gas Log, Wall Heater Connectors with Fittings

Length (When ordering, add length after the part number)

Description

1/2'' MIP x 1/2'' MIP 10-3131- $21.93 $25.28 $27.08 $29.52 $32.80 $43.38 $51.16 $58.65 3/8'' MIP x 1/2'' MIP 10-2131- 21.93 25.28 27.08 29.52 32.80 43.38 51.16 58.65 3/8'' MIP x 3/8'' MIP 10-2121- 21.93 25.28 27.08 29.52 32.80 43.38 51.16 58.65

1/2'' FIP x 1/2'' FIP 10-3232- 21.93 25.28 27.08 29.52 32.80 43.38 51.16 58.65 3/8'' FIP x 1/2'' FIP 10-2232- 21.93 25.28 27.08 29.52 32.80 43.38 51.16 58.65

/8'' FIP x 3/8'' FIP 10-2222- 21.93 25.28 27.08 29.52 32.80 43.38 51.16 58.65

3/8'' MIP x 3/8'' FIP 10-2122- 21.93 25.28 27.08 29.52 32.80 43.38 51.16 58.65 3/8'' MIP x 1/2'' FIP 10-2132- 21.93 25.28 27.08 29.52 32.80 43.38 51.16 58.65 1/2'' MIP x 3/8'' FIP 10-3122- 21.93 25.28 27.08 29.52 32.80 43.38 51.16 58.65 1/2'' MIP x 1/2'' FIP 10-3132- 21.93 25.28 27.08 29.52 32.80 43.38 51.16 58.65

Carton Qty./Approx. Carton Wt. Lbs. 25/13 25/14 25/15 25/17 25/18 25/20 12/11 12/12

Water Heater, Gas Log, Wall Heater Connectors with Valves

Part #

12'' 18'' 24'' 30'' 36'' 48'' 60'' 72''

Description

1/2'' MIP x 1/2'' FIP Ball 10-3135- $43.13 $46.71 $48.38 $50.07 $53.71 $65.02 $73.28 $81.53 3/8'' MIP x 1/2'' FIP Ball 10-2135- 43.13 46.71 48.38 50.07 53.71 65.02 73.28 81.53

1/2'' FIP x 1/2'' FIP Ball 10-3235- 43.13 46.71 48.38 50.07 53.71 65.02 73.28 81.53 3/8'' FIP x 1/2'' FIP Ball 10-2235- 43.13 46.71 48.38 50.07 53.71 65.02 73.28 81.53

1/2'' MIP x 1/2'' FIP Angle 10-3136- 58.92 62.19 63.39 64.47 68.11 79.46 87.67 95.92

1/2'' FIP x 1/2'' FIP Angle 10-3236- 58.92 62.19 63.39 64.47 68.11 79.46 87.67 95.92

Carton Qty./Approx. Carton Wt. Lbs. 25/17 25/18 25/19 25/20 25/22 25/24 12/13 12/14

Note: For poly-bagged connectors, consult Dormont for pricing.

Part #

12'' 18'' 24'' 30'' 36'' 48'' 60'' 72''

Nut By Nut Connectors (NOT CSA DESIGN CERTIFIED)

Description

3/8'' OD (1/4'' ID) tube with 3/8'' OD flare nuts

3/8'' OD (1/4'' ID) tube with 3/8'' OD flare nuts (9/16''-24 thread)

Part # 10'' 16'' 22'' 28'' 34'' 46'' 58'' 70''

10-9898- $15.16 $18.48 $20.69 $23.23 $26.27 $35.51 $43.58 $49.64

19-9999-

15.16 18.48 20.69 23.23 26.27 35.51 43.58 49.64

Length (

When ordering, add length after the part number)

Length (When ordering, add length after the part number)

Carton Qty./Approx. Carton Wt. Lbs. 25/4 25/5 25/6 25/7 25/8 25/10 12/6 12/7

1-800-DORMONT www.dormont.com

Page 11

Range Connectors with Yellow Safety Shield Coating -– 5/8'' OD (1/2'' ID)

SERIES

Coated Stainless Steel Gas Connectors

• Coating provides extra corrosion protection from accidental contact with common household chemicals.

• Consistent coverage provides protection along the entire length of the connector.

• Yellow is the industry-recognized color for gas line identification.

• Same flow capacity as uncoated (see page 4).

Coated Range Connectors with Fittings

Category A

Description

3/4'' MIP x 3/4'' MIP 30C-4141- $26.05 $31.65 $36.31 $37.99 $41.45 $52.78 $63.14 $73.22 1/2'' MIP x 3/4'' MIP 30C-3141- 26.05 31.65 36.31 37.99 41.45 52.78 63.14 73.22 1/2'' MIP x 1/2'' MIP 30C-3131- 26.05 31.65 36.31 37.99 41.45 52.78 63.14 73.22

3/4'' FIP x 3/4'' FIP 30C-4242- 26.05 31.65 36.31 37.99 41.45 52.78 63.14 73.22 1/2'' FIP x 3/4'' FIP 30C-3242- 26.05 31.65 36.31 37.99 41.45 52.78 63.14 73.22 1/2'' FIP x 1/2'' FIP 30C-3232- 26.05 31.65 36.31 37.99 41.45 52.78 63.14 73.22

1/2'' MIP x 1/2'' FIP 30C-3132- 26.05 31.65 36.31 37.99 41.45 52.78 63.14 73.22 1/2'' MIP x 3/4'' FIP 30C-3142- 26.05 31.65 36.31 37.99 41.45 52.78 63.14 73.22 3/4'' MIP x 1/2'' FIP 30C-4132- 26.05 31.65 36.31 37.99 41.45 52.78 63.14 73.22 3/4'' MIP x 3/4'' FIP 30C-4142- 26.05 31.65 36.31 37.99 41.45 52.78 63.14 73.22

3/4'' MIP x 3/4'' FIP (Elbow) 30C-4144- 32.02 38.35 44.37 46.30 50.19 61.38 71.75 81.37

Carton Qty./Approx. Carton Wt. Lbs. 25/25 25/27 25/29 25/31 25/33 25/36 12/20 12/21

Part #

12'' 18'' 24'' 30'' 36'' 48'' 60'' 72''

Coated Range Connectors with Valves

Description

3/4'' FIP x 3/4'' FIP Ball 30C-4245- $56.82 $63.42 $67.55 $67.90 $72.20 $83.74 $95.61 $106.34 1/2'' FIP x 3/4'' FIP Ball 30C-3245- 56.82 63.42 67.55 67.90 72.20 83.74 95.61 106.34 3/4'' FIP x 1/2'' FIP Ball 30C-4235- 56.82 63.42 67.55 67.90 72.20 83.74 95.61 106.34 1/2'' FIP x 1/2'' FIP Ball 30C-3235- 56.82 63.42 67.55 67.90 72.20 83.74 95.61 106.34

3/4'' MIP x 3/4'' FIP Ball 30C-4145- 56.82 63.42 67.55 67.90 72.20 83.74 95.61 106.34 1/2'' MIP x 3/4'' FIP Ball 30C-3145- 56.82 63.42 67.55 67.90 72.20 83.74 95.61 106.34 3/4'' MIP x 1/2'' FIP Ball 30C-4135- 56.82 63.42 67.55 67.90 72.20 83.74 95.61 106.34 1/2'' MIP x 1/2'' FIP Ball 30C-3135- 56.82 63.42 67.55 67.90 72.20 83.74 95.61 106.34

3/4'' FIP x 3/4'' FIP Angle 1/2'' FIP x 3/4'' FIP Angle

3/4'' MIP x 3/4'' FIP Angle 1/2'' MIP x 3/4'' FIP Angle

Carton Qty./Approx. Carton Wt. Lbs. 25/31 25/32 25/34 25/36 25/38 25/41 12/22 12/23

Note: 30 series gas connectors have special 15/16'' - 16 threads required for CSA design certification.

Part #

30C-4246- 81.88 86.94 90.57 92.54 94.51 105.88 117.83 128.62 30C-3246- 81.88 86.94 90.57 92.54 94.51 105.88 117.83 128.62

30C-4146- 81.88 86.94 90.57 92.54 94.51 105.88 117.83 128.62 30C-3146- 81.88 86.94 90.57 92.54 94.51 105.88 117.83 128.62

12'' 18'' 24'' 30'' 36'' 48'' 60'' 72''

Length (

Length (When ordering, add length after the part number)

When ordering, add length after the part number)

Nut By Nut Coated Connectors (NOT CSA DESIGN CERTIFIED)

Length (When ordering, add length after the part number)

Description

5/8'' OD (1/2'' ID) tube with 30C-9898- $22.51 $26.51 $30.42 $31.91 $35.11 $44.54 $53.04 $61.80 5/8'' OD flare nuts (15/16'' - 16 thread)

Carton Qty./Approx. Carton Wt. Lbs. 25/10 25/11 25/12 25/15 25/16 25/20 12/12 12/13

1-800-DORMONT

www.dormont.com

Part #

10'' 16'' 22'' 28'' 34'' 46'' 58'' 70''

Page 12

Dryer Connectors with Yellow Safety Shield Coating– 1/2"OD ( 3/8" ID ) Category A

Coated Dryer Connectors with Fittings

Length (When ordering, add length after the part number)

Description

Part #

3/8'' MIP x 3/8'' MIP 20C-2121- $25.08 $30.37 $34.68 $37.16 $40.94 $49.58 $60.91 $69.33 1/2'' MIP x 1/2'' MIP 20C-3131- 25.08 30.37 34.68 37.16 40.94 49.58 60.91 69.33 3/8'' MIP x 1/2'' MIP 20C-2131- 25.08 30.37 34.68 37.16 40.94 49.58 60.91 69.33

3/8'' FIP x 3/8'' FIP 20C-2222- 25.08 30.37 34.68 37.16 40.94 49.58 60.91 69.33

/2'' FIP x 1/2'' FIP 20C-3232- 25.08 30.37 34.68 37.16 40.94 49.58 60.91 69.33

1 3/8'' FIP x 1/2'' FIP 20C-2232- 25.08 30.37 34.68 37.16 40.94 49.58 60.91 69.33

3/8'' MIP x 3/8'' FIP 20C-2122- 25.08 30.37 34.68 37.16 40.94 49.58 60.91 69.33 3/8'' MIP x 1/2'' FIP 20C-2132- 25.08 30.37 34.68 37.16 40.94 49.58 60.91 69.33 1/2'' MIP x 3/8'' FIP 20C-3122- 25.08 30.37 34.68 37.16 40.94 49.58 60.91 69.33 1/2'' MIP x 1/2'' FIP 20C-3132- 25.08 30.37 34.68 37.16 40.94 49.58 60.91 69.33

Carton Qty./Approx. Carton Wt. Lbs. 25/18 25/19 25/20 25/22 25/24 25/27 12/14 12/16

12'' 18'' 24'' 30'' 36'' 48'' 60'' 72''

SERIES

Coated Dryer Connectors with Valves

When ordering, add length after the part number)

Description

Length (

Part #

1/2'' MIP x 1/2'' FIP Ball 20C-3135- $47.81 53.13 $57.32 $59.00 $63.21 $72.99 $85.14 $93.74 3/8'' MIP x 1/2'' FIP Ball 20C-2135- 47.81 53.13 57.32 59.00 63.21 72.99 85.14 93.74

1/2'' FIP x 1/2'' FIP Ball 20C-3235- 47.81 53.13 57.32 59.00 63.21 72.99 85.14 93.74 3/8'' FIP x 1/2'' FIP Ball 20C-2235- 47.81 53.13 57.32 59.00 63.21 72.99 85.14 93.74

Carton Qty./Approx. Carton Wt. Lbs. 25/25 25/26 25/27 25/29 25/31 25/34 12/18 12/20

12'' 18'' 24'' 30'' 36'' 48'' 60'' 72''

Nut By Nut Coated Connectors (NOT CSA DESIGN CERTIFIED)

Length (When ordering, add length after the part number)

Description

1/2'' OD tube with 1/2'' OD flare nuts 20C-9898- $17.30 $22.26 $26.21 $28.89 $32.31 $40.30 $50.75 $58.55

Carton Qty./Approx. Carton Wt. Lbs. 25/7 25/9 25/10 25/12 25/13 25/16 12/10 12/11

Part #

10'' 16'' 22'' 28'' 34'' 46'' 58'' 70''

1-800-DORMONT www.dormont.com

Page 13

Water Heater & Wall Heater with Yellow Safety Shield Coating – 3/8'' OD (1/4'' ID)

SERIES

Water Heater and Wall Heater Coated Connectors

Length (When ordering, add length after the part number)

Description

1/2'' MIP x 1/2'' MIP 10C-3131- $23.25 $26.80 $28.70 $31.31 $34.77 $45.99 $54.23 $62.17 3/8'' MIP x 1/2'' MIP 10C-2131- 23.25 26.80 28.70 31.31 34.77 45.99 54.23 62.17 3/8'' MIP x 3/8'' MIP 10C-2121- 23.25 26.80 28.70 31.31 34.77 45.99 54.23 62.17

1/2'' FIP x 1/2'' FIP 10C-3232- 23.25 26.80 28.70 31.31 34.77 45.99 54.23 62.17 3/8'' FIP x 1/2'' FIP 10C-2232- 23.25 26.80 28.70 31.31 34.77 45.99 54.23 62.17 3/8'' FIP x 3/8'' FIP 10C-2222- 23.25 26.80 28.70 31.31 34.77 45.99 54.23 62.17

3/8'' MIP x 3/8'' FIP 10C-2122- 23.25 26.80 28.70 31.31 34.77 45.99 54.23 62.17 3/8'' MIP x 1/2'' FIP 10C-2132- 23.25 26.80 28.70 31.31 34.77 45.99 54.23 62.17 1/2'' MIP x 3/8'' FIP 10C-3122- 23.25 26.80 28.70 31.31 34.77 45.99 54.23 62.17 1/2'' MIP x 1/2'' FIP 10C-3132- 23.25 26.80 28.70 31.31 34.77 45.99 54.23 62.17

Carton Qty./Approx. Carton Wt. Lbs. 25/14 25/16 25/17 25/18 25/19 25/21 12/12 12/13

Part #

Water Heater and Wall Heater Coated Connectors with Valves

Description

1/2'' MIP x 1/2'' FIP Ball 10C-3135- $45.72 $49.51 $51.27 $53.08 $56.94 $68.93 $77.68 $86.44

3/8'' MIP x 1/2'' FIP Ball 10C-2135- 45.72 49.51 51.27 53.08 56.94 68.93 77.68 86.44

1/2'' FIP x 1/2'' FIP Ball 10C-3235- 45.72 49.51 51.27 53.08 56.94 68.93 77.68 86.44

3/8'' FIP x 1/2'' FIP Ball 10C-2235- 45.72 49.51 51.27 53.08 56.94 68.93 77.68 86.44

1/2'' MIP x 1/2'' FIP Angle 10C-3136- 62.46 65.92 67.20 68.33 72.20 84.23 92.94 101.68

Part #

2'' 18'' 24'' 30'' 36'' 48'' 60'' 72''

Length (When ordering, add length after the part number)

12'' 18'' 24'' 30'' 36'' 48'' 60'' 72''

ategory A

1/2'' FIP x 1/2'' FIP Angle 10C-3236- 62.46 65.92 67.20 68.33 72.20 84.23 92.94 101.68

Carton Qty./Approx. Carton Wt. Lbs. 25/18 25/19 25/20 25/22 25/23 25/25 12/14 12/15

Nut By Nut Coated Connectors (NOT CSA DESIGN CERTIFIED)

Length (When ordering, add length after the part number)

Description

3/8'' OD (1/4'' ID) tube with 3/8'' OD flare nut 10C-9898- $16.07 $19.59 $21.93 $24.63 $27.84 $37.63 $46.20 $52.62

3/8'' OD (1/4'' ID) tube with 3/8'' OD flare nuts 19C-9999- 16.07 19.59 21.93 24.63 27.84 37.63 46.20 52.62 (9/16''-24 fine thread)

Carton Qty./Approx. Carton Wt. Lbs. 25/6 25/7 25/8 25/10 25/11 25/13 12/8 12/9

Part #

Design Certifications and Approvals

• ANSI Z21.24/CSA 6.10 – Connectors for Gas Appliances

• ANSI Z21.75/CSA 6.27 – Connectors for Outdoor Appliances and Manufactured Homes

• City of New York – MEA #376-92-M

• Approved by the Commonwealth of Massachusetts Board of State Examiners of Plumbers and Gas Fitters –

exceed 36''.

ALL INSTALLATIONS MUST COMPLETELY COMPLY WITH ALL DORMONT MANUFACTURING COMPANY WARNINGS AND INSTRUCTIONS, NATIONAL, STATE AND LOCAL CODES AND ALL APPLICABLE ANSI STANDARDS.

1-800-DORMONT

www.dormont.com

connector length may not

10'' 16'' 22'' 28'' 34'' 46'' 58'' 70''

Features and Specifications

• Tubing . . . . . . . . . . . . Annealed, 304 stainless steel (ASTM A240)

• Coating. . . . . . . . . . . . Custom Formulated Polymer

• Flare nuts. . . . . . . . . . Brass or plated steel

• Adapters . . . . . . . . . . Brass or plated steel

• Approved for indoor and outdoor use

• Temperature rating of connector with adapters: - 40°F to 150°F

• Temperature rating with valves: - 40°F to 125°F

• 100% factory leak tested

•

• Not engineered for high temperature applications such as gas

logs, fireplace inserts or free-standing fireplaces

• Not suitable for moveable installations. Not NSF certified

• Avoid repeated bending, flexing, or extreme vibration. Do not use on generators due to excessive vibration

Meets SAE J512 standard – 45° flare (with the exception of 15/16'' – 16 threads of 5/8'' OD)

Page 14

Stainless Steel Gas Hearth Connectors With High-Temperature Black Epoxy Coating

Specifically engineered for high-temperature applications such as gas logs, fireplace inserts, and free-standing fireplaces

• Designed to reduce glare and hide the connector from view to enhance the beauty of the hearth.

Specification Sheet

oating reduces glare

C and hides the connector from view

Black adapters and flare

uts further reduce

n visibility of the connector

• Hi-temperature black epoxy coating hides the connector while withstanding up to 350°F.

• Black adapters and flare nuts are plated with zinc di-chromate to further reduce the visibility of the gas connection.

Connector Minimum Flow Capacity – For Natural Gas (per ANSI Z21.24/CSA 6.10 & ANSI Z21.75/CSA 6.27)

Straight Length Capacity – BTU per Hr 0.64 SG., 1000 BTU per Cu. Ft.

at 0.5 inch Water Column Pressure Drop

Series Nominal Nominal

OD (in) ID (in) 12'' 18'' 24'' 30'' 36''

10 3/8'' 1/4'' 48,000 43,800 40,000 36,400 33,400

20 1/2'' 3/8'' 102,000 93,100 85,000 77,100 71,100

Connector Minimum Flow Capacity – For Propane Gas (per ANSI Z21.24/CSA 6.10 & ANSI Z21.75/CSA 6.27)

Straight Length Capacity – BTU per Hr 1.55 SG., 2500 BTU per Cu. Ft.

at 0.5 inch Water Column Pressure Drop

Series Nominal Nominal

OD (in) ID (in) 12'' 18'' 24'' 30'' 36''

10 3/8'' 1/4'' 76,800 70,080 64,000 58,240 53,440

20 1/2'' 3/8'' 163,200 148,960 136,000 123,360 113,760

Note: When using 0.2 water column pressure drop, capacity can be determined by multiplying the values above by 0.632 (for both natural and propane gas). For capacities other than noted, contact Dormont at 1-800-DORMONT.

Black epoxy coating withstands up to 350°F

Exclusive No-Neck design provides protection against stress fractures

More corrugations per inch increase flexibility and extend service life

Design Certifications and Approvals Features and Specifications

• ANSI Z21.24/CSA 6.10 – Connectors for Gas Appliances

• ANSI Z21.75/CSA 6.27 – Connectors for Outdoor Appliances and

Manufactured Homes

• City of New York – MEA #376-92-M

• Approved by the Commonwealth of Massachusetts Board of State

Examiners of Plumbers and Gas Fitters –

exceed 36''

ALL INSTALLATIONS MUST COMPLETELY COMPLY WITH ALL DORMONT MANUFACTURING COMPANY WARNINGS AND INSTRUCTIONS, NATIONAL, STATE AND LOCAL CODES AND ALL APPLICABLE ANSI STANDARDS.

connector length may not

• Tubing . . . . . . . . . . . Annealed, 304 stainless steel (ASTM A240)

• Coating . . . . . . . . . . Black epoxy. Maximum temperature rating: 350°F

• Flare nuts . . . . . . . . Brass or steel with black zinc di-chromate plating

• Adapters . . . . . . . . . Brass or Steel with black zinc di-chromate plating

• Approved for indoor and outdoor use

• Designed for high-temperature applications up to 350°F.

• 100% factory leak tested. When installing a new appliance or when an existing appliance is moved to

•

a new location a NEW gas connector must be used per manufacturer’s installation instructions and per product standards ANSI Z21.24/CSA 6.10 and ANSI Z21.75/CSA 6.27.

• Avoid repeated bending, flexing, or extreme vibration. Do not use on

generators due to excessive vibration

1-800-DORMONT

www.dormont.com

Page 15

Stainless Steel Gas Hearth Connectors With Category A High-Temperature Black Epoxy Coating

10A Series – 3/8'' OD (1/4'' ID) Black Epoxy Coated Connectors

Length (when ordering, add length after the part number)

Description

3/8" MIP x 3/8" MIP 10A-2121- $24.18 $27.50 $30.69 $33.62 $37.44 3/8" MIP x 1/2" MIP 10A-2131- 24.18 27.50 30.69 33.62 37.44 1/2" MIP x 1/2" MIP 10A-3131- 24.18 27.50 30.69 33.62 37.44

3/8" MIP x 3/8" FIP 10A-2122- 24.18 27.50 30.69 33.62 37.44 3/8'' MIP x 1/2'' FIP 10A-2132- 24.18 27.50 30.69 33.62 37.44 1/2" MIP x 3/8" FIP 10A-3122- 24.18 27.50 30.69 33.62 37.44 1/2'' MIP x 1/2'' FIP 10A-3132- 24.18 27.50 30.69 33.62 37.44

Carton Qty./Approx. Carton Wt. Lbs. 25/10 25/11 25/12 25/14 25/18

3/8" MIP x 1/2" FIP ball valve 10A-2135- $46.12 $49.94 $54.04 $55.92 $63.88 1/2" MIP x 1/2" FIP ball valve 10A-3135- 46.12 49.94 54.04 55.92 63.88

Carton Qty./Approx. Carton Wt. Lbs. 25/15 25/16 25/17 25/18 25/22

Part # 12" 18" 24" 30'' 36"

20A Series – 1/2'' OD (3/8'' ID) Black Epoxy Coated Connectors

Length (

Description

3/8" MIP x 3/8" MIP 20A-2121- $26.09 $31.17 $37.03 $39.82 $43.65 3/8" MIP x 1/2" MIP 20A-2131- 26.09 31.17 37.03 39.82 43.65 1/2" MIP x 1/2" MIP 20A-3131- 26.09 31.17 37.03 39.82 43.65

3/8" MIP x 3/8" FIP 20A-2122- 26.09 31.17 37.03 39.82 43.65 3/8'' MIP x 1/2'' FIP 20A-2132- 26.09 31.17 37.03 39.82 43.65 1/2" MIP x 3/8" FIP 20A-3122- 26.09 31.17 37.03 39.82 43.65 1/2'' MIP x 1/2'' FIP 20A-3132- 26.09 31.17 37.03 39.82 43.65

Carton Qty./Approx. Carton Wt. Lbs. 25/12 25/13 25/15 25/17 25/18

3/8" MIP x 1/2" FIP ball valve 20A-2135- $48.22 $53.60 $60.39 $62.17 $70.91

1/2" MIP x 1/2" FIP ball valve 20A-3135- 48.22 53.60 60.39 62.17 70.91

Carton Qty./Approx. Carton Wt. Lbs. 25/22 25/23 25/25 25/26 25/28

Part # 12" 18" 24" 30'' 36"

when ordering, add length after the part number)

Nut by Nut Black Epoxy Coated Connectors (NOT CSA DESIGN CERTIFIED)

Length (when ordering, add length after the part number)

Description

3/8" OD / 1/4" ID 10A-5858- $17.74 $21.65 $24.61 $27.64 $31.23

Carton Qty./Approx. Carton Wt. Lbs. 25/6 25/7 25/8 25/10 25/11

1/2" OD / 3/8" ID 20A-5858- $19.12 $24.57 $28.24 $32.42 $34.78

Carton Qty./Approx. Carton Wt. Lbs. 25/6 25/8 25/9 25/11 25/13

Part # 10" 16" 22" 28'' 34"

1-800-DORMONT www.dormont.com

Page 16

Gas Appliance Installation Kits Category A

Increase Profits with these Consumer-Friendly Kits

• This easy, add-on sale provides a good revenue and profit opportunity.

Includes all components needed for a complete

•

nstallation to make appliance installations quick

nd easy.

• Color-coding makes identification and selection easy. Space-saving poly-bags.

•

• Peg hook or cut-case display option available.

Stainless Steel Dryer Connector Kits

Part# Contents Wt. Per Carton Each

20-3122KIT-48B (1) 1/2" OD x 48" stainless steel gas connector 6.1 5 $70.71

Three (3) fittings:

(1) 1/2" male pipe thread (tapped 3/8" female pipe thread) (1) 3/8" female pipe thread

(1) 3/4" male pipe thread (tapped 1/2" female pipe thread) (1) Pipe thread sealant (1) Leak test solution (1) Detailed installation guide

For shut-off valves, see page 21.

Carton #Pcs. Price

Stainless Steel Range Connector Kits

Part# Contents Wt. Per Carton Each

30-3131KIT-48B (1) 5/8" OD x 48" stainless steel gas connector 6.3 5 $72.24

Three (3) fittings:

(2) 1/2" male pipe thread (tapped 3/8" female pipe thread)

(1) 3/4" male pipe thread (tapped 1/2" female pipe thread) (1) Pipe thread sealant (1) Leak test solution (1) Detailed installation guide

Carton #Pcs. Price

For shut-off valves, see page 21.

Gas Water Heater Connector Kits

Part# Contents Wt. Per Carton Each

20-3131KIT-36B (1) 1/2" OD x 36" stainless steel gas connector 6.3 5 $69.30

Three (3) fittings:

(2) 1/2" male pipe thread (tapped 3/8" female pipe thread)

(1) 3/4" male pipe thread (tapped 1/2" female pipe thread)

(1) Pipe thread sealant (1) Leak test solution (1) Detailed installation guide

Carton #Pcs. Price

1-800-DORMONT www.dormont.com

Page 17

Category B

Applications

• Boilers

• Gas Meters Furnaces

•

• Commercial Water Heaters

• Gas packs/Rooftop HVAC units

• Tankless Water Heater

High BTU Stainless Steel Gas Connectors

Specification Sheet

Designed for high BTU demand

Exclusive No-Neck design increases flexibility

• Specifically designed for application with a significant BTU requirement. Can supply up to 1.5 million BTU (natural gas) or 2.4 million (propane), depending on length.

CSA design-certified

Durable 304 stainless steel tubing

• Eliminates the need for pipe nipples, 90’s and elbows.

• Pre-fabricated gas connector means no field threading, cutting or assembly of CSST fitting and tubing.

More corrugations per inch increase flexibility and extend service life

• Available with hot-dipped PVC coating with antimicrobial agent

(patent pending) or Safety Shield yellow epoxy coating.

Connector Minimum Flow Capacity – For Natural Gas (per ANSI Z21.24/CSA 6.10 & ANSI Z21.75/CSA 6.27)

Straight Length Capacity – BTU per Hr 0.64 SG., 1000 BTU per Cu. Ft. at 0.5 inch Water Column Pressure Drop

Series Nominal OD (in) Nominal ID (in) 12'' 18'' 24'' 30'' 36'' 48'' 60'' 72''

40/41/40C 1'' 3/4'' 349,000 318,500 290,900 270,500 255,900 215,000 197,400 173,900

50/51 1-1/4'' 1'' 698,000 637,000 581,800 545,200 515,900 442,700 398,900 347,800

60/61 1-1/2'' 1-1/4'' 1,500,000 1,470,000 1,200,000 1,130,000 960,000 930,000

Connector Minimum Flow Capacity – For Propane Gas (per ANSI Z21.24/CSA 6.10 & ANSI Z21.75/CSA 6.27)

Straight Length Capacity – BTU per Hr 1.55 SG., 2500 BTU per Cu. Ft. at 0.5 inch Water Column Pressure Drop

Series Nominal OD (in) Nominal ID (in) 12'' 18'' 24'' 30'' 36'' 48'' 60'' 72''

40/41/40C 1'' 3/4'' 558,400 509,600 465,440 432,800 409,440 344,000 315,840 278,240

50/51 1-1/4'' 1'' 1,116,800 1,019,200 930,880 872,320 825,440 708,320 638,240 556,480

60/61 1-1/2'' 1-1/4'' 2,400,000 2,352,000 1,920,000 1,808,000 1,536,000 1,488,000

NOTE: When using 0.2 water column pressure drop, capacity can be determined by multiplying the values above by 0.632 (for both natural and propane gas). For capacities at other than noted, contact Dormont at 1-800-DORMONT.

Approvals and Certifications

• ANSI Z21.24/CSA 6.10 – Connectors for Gas Appliances

• ANSI Z21.75/CSA 6.27 – Connectors for Outdoor Appliances and Manufactured Homes

• City of New York – MEA #376-92-M

• Approved by the Commonwealth of Massachusetts Board of State Examiners of Plumbers and Gas Fitters –

exceed 36''.

ALL INSTALLATIONS MUST COMPLETELY COMPLY WITH ALL DORMONT MANUFACTURING COMPANY WARNINGS AND INSTRUCTIONS, NATIONAL, STATE AND LOCAL CODES AND ALL APPLICABLE ANSI STANDARDS.

40/41, 50/51 and 60/61 series only are IAPMO approved

1-800-DORMONT

www.dormont.com

connector length may not

Features and Specifications

• Tubing . . . . . . . . . . . Annealed, 304 stainless steel (ASTM A240)

• Flare nuts . . . . . . . . Brass or plated steel

• Adapters . . . . . . . . . Brass or plated steel

• Optional coating . . . Heavy-duty, antimicrobial, hot-dipped gray PVC

• Approved for indoor and outdoor use

• Operating temperature with adapters: -40°F to 150°F

• 100% leak tested

•

• Avoid repeated bending, flexing, or extreme vibration. Do not use on generators due to excessive vibration

• Not suitable for moveable installations. Not NSF certified.

(41, 51 & 61 series). Coating will not hold a flame.

Page 18

High BTU Price List Category B

PVC coating will not chip or crack

•

• Unmatched corrosion and UV protection

• Ideal for outdoor installations

• Coating includes antimicrobial agent

• Coating will not hold a flame

41 Series – 1''OD (3/4''ID)

Length (When ordering, add length after the part number)

Description Part # 12'' 18'' 24'' 30'' 36'' 48'' 60'' 72''

3/4'' MIP x 3/4'' FIP with PVC coating 41-4142- $72.90 $74.79 $77.44 $84.34 $91.41 $105.68 $114.45 $130.14

Carton Qty./Approx. Carton Wt. Lbs. 15/21 15/23 15/26 15/28 15/30 15/49 6/24 6/33

51 Series - 1-1/4''OD (1'' ID)

Length (

Description Part # 12'' 18'' 24'' 30'' 36'' 48'' 60'' 72''

1'' MIP x 1'' FIP with PVC coating 51-5152- $101.60 $104.73 $106.56 $116.30 $125.78 $139.60 $159.20 $179.91

Carton Qty./Approx. Carton Wt. Lbs. 10/18 10/22 10/25 10/31 10/36 10/48 6/31 6/36

When ordering, add length after the part number)

61 Series – 1-1/2'' OD (1-1/4'' ID)

Length (When ordering, add length after the part number)

Description Part # 12'' 18'' 24'' 30'' 36'' 48'' 60'' 72''

1-1/4'' MIP x 1-1/4'' FIP with PVC coating 61-6162- $138.20 $142.20 $144.56 $157.41 $167.07 $186.34 $205.63 $224.88

Carton Qty./Approx. Carton Wt. Lbs. 10/30 10/34 10/37 10/40 10/44 10/52 6/36 6/41

All connectors are available with or without a heavy-duty antimicrobial, hot-dipped gray PVC coating

Tankless Water

Heater

Boiler

Rooftop HVAC Unit

Stationery, Stand-by Generator

1-800-DORMONT www.dormont.com

Page 19

Category B High BTU Price List

Safety Shield®Coated High Btu Stainless Steel Gas Connectors

• Coating provides extra corrosion protection from accidental contact with common household chemicals.

• The industry-recognized color for gas line identification.

40C Series – 1''OD (3/4''ID)

Length (When ordering, add length after the part number)

Description Part # 24'' 30'' 36'' 48'' 60'' 72''

3/4'' MIP x 3/4'' FIP 40C-4142- $75.26 — $88.23 $101.83 ——

Carton Qty./Approx. Carton Wt. Lbs. 15/26 15/28 15/30 15/49 6/24 6/33

High Btu Stainless Steel Gas Connectors

• Naturally corrosion-resistant 304 stainless steel

• Rated for indoor or outdoor use.

40 Series – 1''OD (3/4''ID)

Length (When ordering, add length after the part number)

Description Part # 12'' 18'' 24'' 30'' 36'' 48'' 60'' 72''

3/4'' MIP x 3/4'' FIP 40-4142- $66.24 $68.68 $71.00 $77.92 $83.23 $96.06 $103.19 $117.24

Carton Qty./Approx. Carton Wt. Lbs. 15/15 15/17 15/20 15/23 15/28 15/34 6/14 6/18

50 - 1-1/4'' OD (1'' ID)

Length (When ordering, add length after the part number)

Description Part # 12'' 18'' 24'' 30'' 36'' 48'' 60'' 72''

1'' MIP x 1'' FIP 50-5152- $93.90 $97.63 $100.14 $110.85 $117.75 $129.96 $147.91 $167.07

Carton Qty./Approx. Carton Wt. Lbs. 10/11 10/14 10/17 10/19 10/22 10/27 6/17 6/20

60 – 1-1/2'' OD (1-1/4'' ID)

Length (When ordering, add length after the part number)

Description Part # 12'' 18'' 24'' 30'' 36'' 48'' 60'' 72''

1-1/4'' MIP x 1-1/4'' FIP 60-6162- $129.79 $132.35 $134.90 $146.17 $154.34 $171.85 $189.56 $207.22

Carton Qty./Approx. Carton Wt. Lbs. 10/17 10/19 10/22 10/24 10/27 10/31 6/22 6/25

1-800-DORMONT

www.dormont.com

Page 20

LP Gas Connectors – 15 PSIG

Pricing and Specification Sheet Category A

Applications

From 1st stage regulator on LP tank to riser

•

• From riser to 2nd stage regulator at the home

• From LP tank to home

Advantages

• Safe and easy alternative to typical copper or polyethylene connectors

• Increase productivity with quick installation because fittings are already attached

• No cutting or flaring of copper needed which saves time and material

• 304 stainless steel tubing significantly reduces the chance of the material work hardening as opposed to copper tubing

• Heavy-duty, hot-dipped gray PVC coating for extra strength and protection against corrosion

(When ordering, add length after the part number)

Length

Description Part #

5/8'' OD Propane Connector without Fittings 31P-7777- $38.38 $45.98 $58.04 $67.95 $77.76

Carton Qty/ Approx. CartonWt. Lbs. 25/19 25/26 25/31 12/19 12/21

Description Part #

5/8'' OD Propane Connector with Fittings 31P-31P32P- $50.99 $59.14 $72.69 $83.37 $93.75 (1/2'' MIP x 1/2'' FIP)

Carton Qty/ Approx. CartonWt. Lbs. 25/24 25/31 25/39 12/20 12/25

Testing

• Intended for use under the guidelines of NFPA 58

• Developed in accordance to the selected sections of the following specifications:

• UL 569 – Aerostatic Leakage Test, Hydrostatic Strength Test – Pull Force Test

• ASTM B154 – Mercurous Nitrate Test for Copper and Copper Alloys

• ANSI Z21.24 – Bending and Torsion Tests

• ANSI Z21.75 – Leakage Performance after Exposure to Temperature Extremes

ALL INSTALLATIONS MUST COMPLETELY COMPLY WITH ALL DORMONT MANUFACTURING COMPANY WARNINGS AND INSTRUCTIONS, NATIONAL, STATE AND LOCAL CODES AND ALL APPLICABLE ANSI STANDARDS.

22'' 34'' 46'' 58'' 70''

Length

(When ordering, add length after the part number)

24'' 36'' 48'' 60'' 72''

Features and Specifications

• Tubing: ...........................................Annealed, 304 stainless steel

• Flare nuts: ......................................5/8'' Forged Brass SAE 45°

• Adapters: ........................................5/8'' Brass SAE 45°

• Coating: ..........................................Heavy-duty, antimicrobial, hot-dipped

• Maximum Pressure Rating: ..........15 PSIG

• Operating temperature: .................-40°F to 150°F

• 100% factory leak tested

(ASTM A240), 5/8'' OD

gray PVC

Installation And Usage

• For outdoor LP-gas connection only • Not for use with natural gas

• This is not an appliance connector • Not suitable for underground piping

• DO NOT attempt to assemble union flare nuts directly to the NPT threads

1-800-DORMONT www.dormont.com

Page 21

Manufactured Home

Category B Gas Connector Kits

Standard Gas Connector Kits

Part # Description Price

010-3132 (1) #30-3132-24'' Gas Connector (1/2'' MIP x 1/2'' FIP) $120.89

1/2'' SnapFast

7020-4142 (1) #30-4142-24'' Gas Connector (3/4'' MIP x 3/4'' FIP) 164.60

3/4'' SnapFast quick-disconnect, (1) Dust Cap and Dust Plug, (1) Warning Tag

7030-4142 (1) #40-4142-24'' Gas Connector (3/4'' MIP x 3/4'' FIP) 213.48

3/4'' SnapFast quick-disconnect, (1) Dust Cap and Dust Plug, (1) Warning Tag

™

quick-disconnect, (1) Dust Cap and Dust Plug, (1) Warning Tag

Kits with a Gas Connector with Hot-Dipped Gray PVC Coating

Part # Description Price

7110-3132 (1) #31-3132-24'' Gas Connector (1/2'' MIP x 1/2'' FIP) $126.02

1/2'' SnapFast quick-disconnect, (1) Dust Cap and Dust Plug, (1) Warning Tag

7120-4142 (1) #31-4142-24'' Gas Connector (3/4'' MIP x 3/4'' FIP) 168.45

3/4'' SnapFast quick-disconnect, (1) Dust Cap and Dust Plug, (1) Warning Tag

7130-4142

(1) #41-4142-24” Gas Connector (3/4'' MIP x 3/4'' FIP) 3/4'' SnapFast quick-disconnect, (1) Dust Cap and Dust Plug, (1) Warning Tag

Kits with a Gas Connector and a Full Port Valve

Part #

7011-3132 (1) #30-3132-24'' Gas Connector (1/2'' MIP x 1/2'' FIP) $42.44

(1) 1/2'' NPT Full Port Valve, (1) 1/2'' Plastic Protection Dust Plug, (1) 1/2'' Plastic Protection Cap

7021-4142 (1) #30-4142-24'' Gas Connector (3/4'' MIP x 3/4'' FIP)

(1) 3/4'' NPT Full Port Valve, (1) 3/4'' Plastic Protection Dust Plug, (1) 3/4'' Plastic Protection Cap

Description

221.17

Price

48.88

7031-4142 (1) #40-4142-24'' Gas Connector (3/4'' MIP x 3/4'' FIP) 99.03

(1) 3/4'' NPT Full Port Valve, (1) 3/4'' Plastic Protection Dust Plug, (1) 3/4'' Plastic Protection Cap

7041-5152 (1) #50-5152-24'' Gas Connector (1'' MIP x 1'' FIP) 127.29

(1) 1'' NPT Full Port Valve, (1) 1'' Plastic Protection Dust Plug, (1) 1'' Plastic Protection Cap

Our listed connectors meet the minimum requirements for manufactured homes as

indicated in the appropriate subsections of HUD, CFR 24 section 3280.

1-800-DORMONT

www.dormont.com

Page 22

Gas Fittings 10, 20, and 30 Series Category C

Fittings constructed of brass or zinc-plated carbon steel

Range – 30 Series Fittings for 5/8'' OD Connectors

Description

5/8'' OD Flare (15/16'' - 16 thread) x 1/2'' MIP (Tapped 3/8'' FIP) 90-3031 25 5.5 $3.61

/8'' OD Flare (15/16'' - 16 thread) x 3/4'' MIP (Tapped 1/2'' FIP) 90-3041 25 6.8 4.72

5/8'' OD Flare (15/16'' - 16 thread) x 1/2'' FIP 90-3032 25 5.0 3.45 5/8'' OD Flare (15/16'' - 16 thread) x 3/4'' FIP 90-3042 25 5.3 4.47

5/8'' OD Flare (15/16'' - 16 thread) x 3/4'' FIP Elbow 95-3042 25 6.8 8.96

Dryer – 20 Series Fittings for 1/2'' OD Connectors

Description

1/2'' OD Flare x 3/8'' MIP (Tapped 1/4'' FIP) 90-2021 25 4.0 $3.52 1/2'' OD Flare x 1/2'' MIP (Tapped 3/8'' FIP) 90-2031 25 5.5 3.14 1/2'' OD Flare x 3/4'' MIP (Tapped 1/2'' FIP) 90-2041 25 5.5 5.70

1/2'' OD Flare x 3/8'' FIP 90-2022 25 3.3 3.00 1/2'' OD Flare x 1/2'' FIP 90-2032 25 4.3 3.01 1/2'' OD Flare x 3/4'' FIP 90-2042 25 5.5 4.21

Part #

Pack

Qty.

Pack

Qty.

Approx.

Pack Wt.

Lbs.

Approx.

Pack Wt.

Lbs.

Price

Each Piece

Price

Each Piece

Water Heater, Gas Log & Wall Heater – 10 Series Fittings for 3/8'' OD Connectors

Approx.

Pack Wt.

Lbs.

Description

Part #

Pack

Qty.

3/8'' OD Flare x 3/8'' MIP (Tapped 1/4'' FIP) 90-1021 25 3.0 $2.74 3/8'' OD Flare x 1/2'' MIP (Tapped 3/8'' FIP) 90-1031 25 5.0 4.03

3/8'' OD Flare x 3/8'' FIP 90-1022 25 3.0 2.20 3/8'' OD Flare x 1/2'' FIP 90-1032 25 4.0 3.76

3/8'' OD Flare x 3/8'' MIP Elbow 95-1021 25 4.2 5.84 3/8'' OD Flare x 1/2'' MIP Elbow 95-1031 25 4.4 8.87

1-800-DORMONT

www.dormont.com

Price

Each Piece

Page 23

Gas Fittings 40, 50 and 60 Series

Category C Flare Caps

Fittings and flare caps are constructed of brass or zinc-plated carbon steel

40 Series - Fittings for 1'' OD Connectors

Description Part # Pack Pack Wt. Price

1'' OD Flare x 3/4'' MIP (Tapped 1/2'' FIP) 90-4041 10 2.8 $5.54

1'' OD Flare x 3/4'' FIP 90-4042 10 3.51 4.91

ty. Lbs. Each Piece

Approx.

50 Series - Fittings for 1-1/4'' OD Connectors

Description Part # Pack Pack Wt. Price

1-1/4'' OD Flare x 1'' MIP (Tapped 3/4'' FIP) 90-5051 10 4.0 $12.13

1-1/4'' OD Flare x 1'' FIP 90-5052 10 3.8 11.12

60 Series - Fittings for 1-1/2'' OD Connectors

Description Part # Pack Pack Wt. Price

1-1/2'' OD Flare x 1-1/4'' MIP (Tapped 1'' FIP) 90-6061 10 6.0 $19.80

1-1/2'' OD Flare x 1-1/4'' FIP 90-6062 10 5.7 18.92

Flare Caps

Description For Connector Valve Part # Qty. Pack Wt. Price

Approx.

Qty. Lbs. Each Piece

Approx.

Qty. Lbs. Each Piece

Pack Approx. Pack

Lbs.

3/8'' SAE Thread (3/8'' OD) 91-1032 2011 10 0.8 $19.77

91-1010, 91ST-1010

1/2'' SAE Thread (1/2'' OD) 91-2032 2012 10 1.3 21.54 Thread (5/8'' OD) 91-2020

5/8'' SAE Thread (5/8'' OD) ------------ 2013 10 2.0 25.38

5/8'' OD (15/16'' - 16 Thread) 91-3032, 91-3042 2014 10 2.9 26.28

93-3042

IMPORTANT: The National Fuel Gas Code (ANSI Z223.1) requires each outlet, including a valve, be closed gas tight with a threaded plug or cap immediately after installation and until equipment is connected, and when equipment is disconnected from an outlet and the outlet is not to be used again immediately.

1-800-DORMONT www.dormont.com

Page 24

Gas Shut-Off Valves Category D

Straight Valves - FIP x FIP (Reduced Port)

Part #

Description

92-2222 3/8'' FIP x 3/8'' FIP 10 3.0 $23.91 92-3232 1/2'' FIP x 1/2'' FIP 10 3.6 23.91 92-4242 3/4'' FIP x 3/4'' FIP 10 5.5 31.14

Straight Valves - FIP x FIP (Side Tapped)

Part #

92ST-3232 1/2'' FIP x 1/2'' FIP 10 4.5 $33.33 92ST-4242 3/4'' FIP x 3/4'' FIP 10 5.7 43.26

Description

Connector Valves - Flare x FIP

Part #

91-1032 3/8'' OD Flare x 1/2'' FIP 10 3.7 $28.05 91-2032 1/2'' OD Flare x 1/2'' FIP 10 4.0 28.05 91-3032 5/8'' OD Flare (15/16'' - 16 thread) x 1/2'' FIP 10 4.5 30.65 91-3042 5/8'' OD Flare (15/16'' - 16 thread) x 3/4'' FIP 10 5.8 39.37

Description

Full Port Valves - FIP x FIP

Part #

94-3232 1/2'' FIP x 1/2'' FIP 10 5.1 $29.37 94-4242 3/4'' FIP x 3/4'' FIP 10 7.5 43.12 94-5252 1'' FIP x 1'' FIP 6 7.8 61.83 94-6262 1-1/4'' FIP x 1-1/4'' FIP 6 11.6 100.78 94-7272 1-1/2'' FIP x 1-1/2'' FIP 6 15.7 136.06 94-8282 2'' FIP x 2'' FIP 2 8.0 200.87

Description

Carton

Qty.

Carton

Qty.

Carton

Qty.

Carton

Qty.

Approx. Carton

Wt. Lbs.

Approx. Carton

Wt. Lbs.

Approx. Carton

Wt. Lbs.

Approx. Carton

Wt. Lbs.

Price

Each Piece

Price

Each Piece

Price

Each Piece

Price

Each Piece

Flare Valves - Flare x Flare

Part #

91-1010 3/8'' OD x 3/8'' OD 10 3.6 $27.52 91-2020 1/2'' OD x 1/2'' OD 10 3.9 27.52

Easy to Use Handle

• Handles are ergonomically designed for smooth turns.

• Quarter-turn handle design makes for easy on/off operation.

• Most handles feature a lock-out for added safety.

Easier Installation

• Large wrench flats allow for quick, easy installation.

Description

Carton

Qty.

Approx. Carton

Wt. Lbs.

Reliable Long-Lasting Performance

• The forged brass body eliminates the possibility of leaks associated with cast products.

• All valves are 100% leak tested.

• Valves are approved and design-certified by CSA for use with natural, manufactured, mixed liquefied petroleum gases, and LP gas-air mixtures.

1-800-DORMONT

www.dormont.com

Price

Each Piece

Page 25

Gas Shut-Off Valves

Category D Fuel Gas Outlets

Flare Valves - Flare x Flare Side Tapped

Part #

91ST-1010 3/8'' OD x 3/8'' OD 10 3.5 $38.10

Description

Carton

Qty.

Approx. Carton

Wt. Lbs.

Price

Each Piece

Angle Connector Valves - Flare x FIP

Part #

93-1032 3/8'' OD Flare x 1/2'' FIP Angle 10 5.1 $37.52 93-2032 1/2'' OD Flare x 1/2'' FIP Angle 10 5.3 45.64 93-3032 5/8'' OD Flare (15/16'' - 16 thread) x 1/2'' FIP Angle 10 5.6 56.46 93-3042 5/8'' OD Flare (15/16'' - 16 thread) x 3/4'' FIP Angle 10 6.0 71.20

Description

Carton

Qty.

Approx. Carton

Wt. Lbs.

Price

Each Piece

Fuel Gas Outlet – Model 961 For Indoor and Outdoor Installations

Part # Description Price

961-2234

961-3422C

961-2122N

961-2021N Model 961 Fuel Gas Outlet 1/2'' OD (M) flare plug 17.09

Fuel Gas Outlet Features:

• Easy and safe operation. When the manual valve is in the closed (OFF) position, to make a connection, the user simply pushes back the locking sleeve, inserts the appliance connector plug, and releases the sleeve. No tools are required for a leak-tight connection.

• Gas flows when the manual valve handle is turned to the open (ON) position.

• An interlocking safety cam prevents release of the appliance connector plug until the manual valve handle is in the closed (OFF) position.

Model 961 Fuel Gas Outlet Connection with 1/2'' NPT (F) 90 deg. inlet and plug with 3/8'' NPT (F) outlet

Model 961 Fuel Gas Outlet Connection with 1/2'' NPT (F) 90 deg. inlet coupler

Model 961 Fuel Gas Outlet 3/8'' NPT (F) plug

• Capacity–42,000 BTU/HR. minimum at 0.3'' w.c. pressure drop; 0.64 SG., natural gas.

• National Fuel Gas Code Reference 5.5.6.

• Temperature Protected—Built-in thermal protection prevents gas flow if the gas connection is exposed to temperatures in excess of 200°F.

• To be used with Natural or Propane Gas.

$134.74

124.67

17.09

1-800-DORMONT www.dormont.com

Page 26

Gas Appliance Pressure Regulators Category E

Dormont Manufacturing gas appliance and line pressure regulators are designed for main

urner and/or pilot applications, where precise

b control of tiny flows is an essential operating requirement.

• Housings are high strength aluminum castings.

• All models have been tested for multi-position mounting and may be installed in any plane or angle without restriction.

• They may be used with natural, manufactured, mixed, LP, or LP gas-air mixture.

RV61LNG-52

RV61LLP-52

RV48-CL-32

Natural Gas

Part Number Pipe Size Capacity in BTU per hr Max Inlet Pressure Outlet Pressure Price Each

RV47LNG-22 3/8'' 125,000 1/2 p.s.i. 2.8'' - 5.2'' w.c. $33.00

R48N32-0306-3.5 1/2'' 230,000 1/2 p.s.i. 3.0'' - 6.0'' w.c. 35.00

R48N42-0306-3.5 3/4'' 250,000 1/2 p.s.i. 3.0'' - 6.0'' w.c. 35.00

RV61LNG-52* 1'' 1,100,000 1 p.s.i. 4.0'' - 8.0'' w.c. 127.00

RV61LNG-62* 1-1/4'' 1,100,000 1 p.s.i. 4.0'' - 8.0'' w.c. 127.00

RV81LNG-72* 1-1/2'' 2,500,000 1 p.s.i. 3.0'' - 8.0'' w.c. 270.00

LP Gas

Part Number Pipe Size Capacity in BTU per hr Max Inlet Pressure Outlet Pressure Price Each

RV47LLP-22 3/8'' 200,000 1/2 p.s.i. 8.0'' -12.0'' w.c. $33.00

R48P32-0512-10 1/2'' 368,000 1/2 p.s.i. 5.0'' - 12.0'' w.c. 35.00

R48P42-0512-10 3/4'' 400,000 1/2 p.s.i. 5.0'' - 12.0'' w.c. 35.00

RV61LLP-52* 1'' 1,760,000 1 p.s.i. 5.0'' - 12.0'' w.c. 127.00

RV61LLP-62* 1-1/4'' 1,760,000 1 p.s.i. 5.0'' - 12.0'' w.c. 127.00

Convertible Regulators

Part Number Pipe Size Capacity in BTU per hr Max Inlet Pressure Outlet Pressure Price Each

RV47CL-33 3/8'' 125,000/200,000 1/2 p.s.i. 4.0'' or 10.0'' w.c. $36.00

RV48CL-32 1/2'' 230,000/368,000 1/2 p.s.i. 5.0'' or 10.0'' w.c. 38.00

RV48CL-42 3/4'' 250,000/400,000 1/2 p.s.i. 5.0'' or 10.0'' w.c. 38.00

**Convertible to LP by inverting cap in stack.

*Regulators marked are for main burner only, NOT for pilot load applications.

- preset to deliver outlet pressure for Natural Gas**

Nat/LP Nat/LP

1-800-DORMONT

www.dormont.com

Page 27

Category E Gas Appliance and Line Pressure Regulators

Dormont Manufacturing 2 psig regulators are designed for natural and liquefied propane gases.

• CSA design certified.

• Manufactured as gas appliance regulators and as line pressure regulators.

• Both series supply precise regulating control from full-flow, down to tiny pilot flows.

• In the absence of flow, these regulators guarantee excellent control of the outlet pressure.

• Meet standard requirements for use with residential, commercial, and industrial applications.

R325 Regulator R625 Regulator

Lever Action Regulators - 2 PSIG Systems

Part Number Gas Size per hr Pressure Range Pre-set Point Quantity Price

R325N32-0509-06 Natural 1/2'' 150,000 2 psig 5'' to 9'' 6 25 $62.00

R325N32-0711-08 Natural 1/2'' 150,000 2 psig 7'' to 11'' 8 25 62.00

R325P32-0711-11 Propane 1/2'' 150,000 2 psig 7'' to 11'' 11 25 62.00

R625N42-0711-08 Natural 3/4'' 300,000 2 psig 7'' to 11'' 8 18 127.00

R625P42-0711-11 Propane 3/4'' 300,000 2 psig 7'' to 11'' 11 18 127.00

Pipe Capacity in BTU Max Inlet Spring Spring Master Carton

Product Specifications - Models R325 and R625

Gases . . . . . . . . . . . . . . . . . . . . . . Natural or Liquefied Propane

Diaphragm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Nitrile Rubber

Allowable Temperature Range . . . -40° to 205° F (-40° to 96° C)

Housing . . . . . . . . . . . . . . . . . . . . . . . . . Aluminum Die Castings

Vent Limiter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Brass

Maximum Inlet Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . 2 psig

Outlet Pressure Adjustment . . . . . . . . . . . . . . . . . 7'' to 11'' W.C.

Connection Size NPT (F)

• R325 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/2'' x 1/2''

• R625 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3/4'' x 3/4''

Venting

• R325 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/8'' NPT

• R625 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3/8'' NPT

Emergency Exposure Limits. . . . . . . . 65 psig Inlet Side Only

1-800-DORMONT www.dormont.com

Page 28

Tankless Water Heater Service Valves Category G

For Installation and Service of Tankless Water Heaters

• Cold water inlet and hot water outlet valves facilitate service and maintenance

• Flush/drain ports allow regular cleaning to remove scale buildup.

• Pressure relief valve included.

• For gas or electric tankless water heaters.

Part # Description Components Price

• Hot water service valve $136.00TVK15PR 3/4'' Tankless Service Valve Set • Cold water service valve

• Pressure relief valve (150 psi)

3/4'' Tankless Service Valve Set • Hot water service valve

TVK15PRC with Integral Check Valve • Cold water service valve with

with integral check valve

• Pressure relief valve (150 psi)

To ensure proper gas supply, Dormont recommends the high BTU ULTRAflow gas connector for all Tankless water heater installations.

See pages 14 and 15 for more details.

Features and Specifications

• 3/4'' FIPS union connections

• Full-port, quarter-turn shutoff valve

• Color-coded valve handles and unions

• Purge/drain quarter-turn shut-off valve

• Purge/drain hose connection port and cap

• 3/4'' pressure relief valve (150 psi)

• Optional cold water integral check valve

• Service valves certified to NSF/ANSI 61-8 for lead extraction

• Staggered connection points ease installation and access

• Forward-facing pressure relief port for easy access

• Forward-facing drain/flush ports ease routine servicing

• Mounts in enclosures with no other adapters

• Flats on union surfaces for easy, secure installation

• Low lead forged brass construction

• 600 WOG rated

137.00

1-800-DORMONT

www.dormont.com

Page 29

Water Heater Kits

Category F Copper Water Heater Connectors

Water Heater Installation Kits

Universal Water Heater Installation Kit includes:

(2) 15''Copper Water Heater Connectors with 3/4'' FIPS Brass Nuts (#8615)

•

• (2) 3/4

x 3''Dielectric Nipples

• (2) 7/8

• (1) Pipe Thread Sealant

Gas Water Heater Installation Kit includes:

• (1) Dormont Stainless Steel Gas Connector (24'') (#20-3132-24)

• (2) 15

• (2) 3/4

• (2) 7/8

• (1) Pipe Thread Sealant

OD Compression Fittings

Copper Water Heater Connectors with 3/4''FIPS Brass Nuts

x 3''Dielectric Nipples

OD Compression Fittings

Water Heater Connectors

Gas Connectors

Water Heater Installation Kits

Description Part # Pack Qty. Quantity Wt. Lbs. Quantity Wt. Lbs. Price

Universal Water Heater Installation Kit 03-WHKIT 12 2.2 29.0 $129.82

Gas Water Heater Installation Kit 04-WHKIT 12 2.7 36.0 178.01

Approx. Each Approx. Carton

Water Heater Connectors

Description Length

3/4'' FIPS Brass Nut x 3/4'' FIPS Brass Nut

3/4'' FIPS Brass Nut x 3/4'' Nominal (7/8'' ID) Female End

Carton Qty./Approx. Carton Wt. Lbs. 25/19 25/21 25/22 25/27

Temperature Rating of Copper Water Heater Connectors = +40°F to +180°F

Part # 8612 8615 8618 8624

Price $22.35 $24.84 $27.05 $33.15

Part # 8712 8715 8718 8724

Price $22.35 $24.84 $27.05 33.15

12'' 15'' 18'' 24''

1-800-DORMONT www.dormont.com

Page 30

CertifiedtoNSF/ANSI61

Section9

Water Supply Line Installation Kit Category F

• Ice Makers

• Refrigerators

• Humidifiers

• Evaporative Coolers

The EZ Quick water line installation kit from Dormont Manufacturing is designed to overcome the limitations of traditional saddle “piercing” valves and copper or plastic supply lines. By using the “quick-connect” fittings from Watts Water Technologies, Inc., installation is simple and leak-free. An integrated shut-off valve allows the appliance to be reliably isolated and removed from service. PEX supply line resists kinking and bursting, and no tools are required for attachment or removal of quick connect fittings.

Part # Description Components Price

Water Supply Connection Kit • Quick-connect water line valve

1/4'' OD Supply Line • 1/4'' push-to-connect union fitting

• 1/4'' compression nut and ferrule

Water Supply Connection Kit • Quick-connect water line valve

IMIK-02 with tubing cutter • 1/4'' x 25' PEX supply line

1/2'' CTS Water Line • 1/4'' Quick-connect union fitting 1/4'' OD Supply Line • 1/4'' compression nut and ferrule

• Tubing cutter

$34.00IMIK-01 1/2'' CTS Water Line • 1/4'' x 25' PEX supply line

38.00

Features and Specifications

• Tested and certified by NSF

• Quick-connect installation

• No soldering or flux

10 Easy Steps to Installation

1. Shut off water supply and drain pipe (no need to let dry)

2. Cut pipe at insertion point

3. Loosen pipe anchors (if necessary)

4. Move pipe to create a 3 inch opening

5. Slide the quick-connect fitting onto one pipe

6. Slide opposite pipe into the quick-connect fitting

7. Secure pipe anchors (if necessary)

8. Insert 1/4'' PEX line into the quick-connect fitting

9. Run PEX line to the appliance

10. Use enclosed fittings to attach PEX line to the appliance

• 100% poly construction

• PEX supply line

• Everything for installation in one kit

1-800-DORMONT

www.dormont.com

Page 31

Pre-Rinse Assemblies, Faucets and Drains

For a complete list of products, see the Dormont PowerForce catalog

Pre-Rinse Assemblies

Part # Description Price

P-WS8B Pre-rinse wall mount with wall bracket $359.00

P-WS8B-AF12 Pre-rinse wall mount with wall bracket and 12'' add-on faucet 433.00

-DS4B Pre-rinse deck mount with wall bracket 359.00

P-DS4B-AF12 Pre-rinse deck mount with wall bracket and 12'' add-on faucet 433.00

Wall Mount Faucets

Part # Description Price

F-WST8-S08S Faucet, wall mount, 8'' adjustable center with 8'' spout $163.00

F-WST8-S12S Faucet, wall mount, 8'' adjustable center with 12'' spout 168.00

F-WST8-S14S Faucet, wall mount, 8'' adjustable center with 14'' spout 171.00

Service Sink Faucet (Not listed to NSF 61)

Part # Description Price

SF-WVB6

Faucet, service sink, 8'' center, 6-1/2'' spout $262.00 with vacuum breaker and wall mount

Pre-Rinse Replacement Parts

INDUSTRY BEST

2 YEAR

WARRANTY!

hese faucet components are tested

T and certified by WQA against NSF/ANSI 61,

ection 9 and ASME A112.18.1

Part # Description Price

PRSH-S Pre-rinse spray head assembly $72.00

PRH-G44 44'' Pre-rinse hose assembly with grip 70.00

FRRV-H Hot valve replacement stem 40.80

FRRV-C Cold valve replacement stem 40.80

Twist Handle Drains

Part # Description Price

W-TA-CF Twist handle drain with 3'' opening and 1-1/2'' or 2'' drain outlet $112.00

W-TB-A Twist handle drain with 3-1/2'' opening and 1-1/2'' drain outlet 97.00

W-TB-B Twist handle drain with 3-1/2'' opening and 2'' drain outlet 97.00

Lever Handle Drains

Part # Description Price

W-LA-CF Lever handle drain with 3'' opening and 1-1/2'' or 2'' drain outlet $112.00

W-LB-A Lever handle drain with 3-1/2'' opening and 1-1/2'' drain outlet 97.00

W-LB-B Lever handle drain with 3-1/2'' opening and 2'' drain outlet 97.00

Twist handle

Lever handle

1-800-DORMONT www.dormont.com

Page 32

Terms and Conditions

Net 30 Days. Minimum order $75 net.

TERMS

Orders below minimum and broken

cartons are subject to a $25.00

handling fee.

1. ACCEPTANCE. If this writing differs in any way from the terms and conditions of Immediate Buyer’s (“Buyer”) order or if this writing is construed as an acceptance or as a confirmation acting as an acceptance, then Dormont’s (“Seller”) acceptance is EXPRESSLY MADE CONDITIONAL ON BUYER’S ASSENT TO ANY TERMS AND CONDITIONS CONTAINED HEREIN THAT ARE DIFFERENT FROM OR ADDITIONAL TO THOSE CONTAINED IN BUYER’S WRITING. Further, this writing shall be deemed notice of objection to such terms and conditions of Buyer. If this writing is construed as the offer, acceptance hereof is EXPRESSLY LIMITED TO THE TERMS AND CONDITIONS CONTAINED HEREIN. In any event, Buyer’s acceptance of the goods shall manifest Buyer’s assent to Seller’s terms and conditions. No addition to or modification of these items will be effective unless set forth in writing and agreed to by Seller.

2. WARRANTIES AND REMEDIES.

a. Warranty.

Seller warrants to Buyer that it holds and will pass marketable title to the goods sold hereunder. If buyer is not the end user of the goods sold hereunder, Buyer agrees to provide to any immediate buyer ("Remote Purchaser") the Limited Warranty and Disclaimer to End-Use (Remote) Purchasers issued by Seller. This warranty excludes coverage for any product that is moved to a new location. Seller’s products should never be reused.

b. Exclusions and Conditions.

Seller’s obligations with respect to the express warranties and remedies contained herein are conditioned on the following: (i) Buyer’s return of the nonconforming goods, if authorized by Seller (excluding labor and freight); and (ii) be installed by individuals trained and certified as a professional with respect to such installations, and be installed, used, repaired and maintained by Buyer and Remote Purchaser in accordance with Dormont’s warnings and instructions, National, State and Local codes or regulations (i.e. National Fuel Code (ANSI Z223.2/NFPA

54); International Fuel Gas Code; Uniform Plumbing Code), standards set by American National Standard Institute, Inc. (ANSI) and/or Canadian Standards Association (CSA) Standards.

3. DISCLAIMER OF IMPLIED WARRANTIES.

SELLER GIVES NO WARRANTIES TO BUYER EXCEPT THOSE EXPRESSLY CONTAINED HEREIN. SELLER DISCLAIMS ALL OTHER WARRANTIES IMPLIED BY LAW, USAGE OF THE TRADE, COURSE OF DEALING OR COURSE OF PERFORMANCE INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

4. LIMITATIONS OF LIABILITY.

The following limitations of Seller’s liability are acknowledged by the parties to be fair and reasonable and shall apply to any act or omission hereunder, and to any breach of this contract of which these terms and conditions form a part:

a. Disclaimer of Damages.

IN NO EVENT SHALL SELLER BE LIABLE FOR SPECIAL, INDIRECT, CONSEQUENTIAL OR INCIDENTAL DAMAGES WHETHER ARISING UNDER CONTRACT, WARRANTY, TORT, NEGLIGENCE, STRICT LIABILITY OR ANY OTHER THEORY OF LIABILITY.

Such damages include but are not limited to loss of profits, loss of use of the goods, damage to property, and claims of third parties.

b. Replacement of Fittings.

Buyer acknowledges that if Buyer replaces the adapter fittings supplied by Seller with fittings produced by another manufacturer, then all of Seller ’s warranties to Buyer and to Remote Purchaser will be voided and Buyer will assume all liability for any damage, injury or loss suffered by Remote Purchaser arising out of this unauthorized modification.

c. Notice and Time of Claims.

(i) Buyer agrees to inspect all products against shipping papers and for damage or shortage upon receipt of goods at destination; (ii) Every claim for loss, damage in transit, or other cause visible upon inspection shall be made with carrier. Claims for shortage must be made within five (5) days of receipt.

5. TERMS. Net 30 Days – minimum order of $75. Interest on accounts overdue more than thirty (30) days will be charged at 2% per month or the highest rate permitted by law, whichever is lower. Orders below minimum and broken cartons are subject to a $25.00 handling fee. Prices subject to change. Buyer shall be liable for any collection costs or attorneys’ fees incurred as a result of Buyer’s failure to pay its account on time.

6. SHIPPING TERMS.

Prepaid and allowed on $1250 net and over. Under $1250 net, shipments shall be F.O.B. factory. Buyer is responsible for all freight charges. The above shall apply only to shipments within the continental United States of America unless otherwise indicated by Seller. The method of shipment and carrier shall be selected by Seller.

7. RETURNS.

No returns are to be made to Seller without first obtaining a return authorization number. The return authorization number must be prominently displayed on the return packaging. Absolutely no returns will be accepted or credited without this prior approval. Returns are subject to 25% restocking charge plus any transportation charges incurred by Seller. Credits will be given only for items that are determined to be eligible for resale by Dormont Manufacturing.

8. TAXES.

The Buyer will pay, or reimburse Seller if it pays, any and all taxes or tariffs or any other similar charges imposed upon this contract, the goods covered hereby or the delivery or use or resale thereof.

9. APPLICABLE LAW.

All questions arising hereunder shall be interpreted and resolved in accordance with the Commercial Code of the Commonwealth of Pennsylvania without regard to its conflict of law provisions and excluding the United Nations Convention on the International Sale of Goods.

10. INDEMNIFICATION

Buyer agrees to indemnify, hold harmless, and defend Seller from and against all claims and lawsuits, including attorney's fees, to the extent that Buyer's negligent acts or omissions to act cause injury, damage or loss to customers of Seller’s products.

REST & C, Rev. 3, 6/06

1-800-DORMONT

www.dormont.com

Page 33

Warranty

Dormont Manufacturing

Limited Warranty and Disclaimers to End-Use (Remote) Purchasers

Dormont Manufacturing warrants that the product and components manufactured by Dormont will be free from defects in material and workmanship. For all connectors, except commercial gas connectors, this limited warranty will be for two (2) years from the original date of purchase. For commercial gas connectors, the limited warranty is for the lifetime of the appliance to which it is first connected. For Tankless Water Heater Service Valves and Water Supply Line Installation Kits, this limited warranty will be for one (1) year from the original date of purchase. PowerForce products are covered by a separate two (2) year warranty. See the Power Force catalog for more complete details.

This limited warranty only applies to a product in its original installation. There is no warranty for a product (1) that has been reused, (2) that is attached to an appliance that has been moved to a different location or (3) where original fittings supplied by Dormont have been changed or removed. Connectors and fittings are not to be reused under any circumstances.

Dormont will replace, FREE OF CHARGE, during the applicable warranty period, its warranted product that it deems to be defective under normal installation, use and service.

Dormont provides no warranty for components incorporated into its products that it does not manufacture and no warranty for products it does not manufacture. The only warranty extended for such products and components is that of the original manufacturer. Contact Dormont for more details on these other warranties.

Replacement can be obtained by returning the product to the original place of purchase, along with the original receipt or proof of purchase. This remedy is exclusive and limited to product replacement only. Labor charges incurred in removal, installation, repair or replacement are excluded.

Any damage to this product as a result of misuse, abuse, neglect, accident, improper installation, or any maintenance or use in violation of Dormontʼs instructions will void this limited warranty. In addition, Dormont disclaims responsibility for any damage, injury or loss caused by failures due to improper installation, use or maintenance. Product must be installed, used, repaired and maintained in accordance with Dormontʼs warnings and instructions, all National, State and Local codes and regulations, and standards set by the American National Standards Institute (ANSI).

OTHER THAN THE ABOVE LIMITED WARRANTY, DORMONT MAKES NO ADDITIONAL WARRANTY OF ANY KIND, AND SPECIFICALLY DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY (INCLUDING WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE). IN THE ALTERNATIVE, DORMONT LIMITS ANY IMPLIED WARRANTY TO THE LENGTH OF THE LIMITED WARRANTY PROVIDED FOR THE PARTICULAR PRODUCT.

Under no circumstances shall Dormont be liable for special, indirect, incidental or consequential damages resulting from use of this product whether the claim is based on breach of warranty or contract, negligence, or strict liability in tort even if Dormont could foresee or has been advised of the possibility of such damages.

This warranty gives you specific legal rights, and you may also have other rights that vary from state to state. Some states do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you.

1-800-DORMONT www.dormont.com

Warranty, Rev. 3, 4/07

Page 34

United Kingdom (UK)

British Standards Institute

ertified to BS669-2:1997 License #KM39643

ested by BSI, meets the essential safety and

performance requirements of BS669 Part 1 and Part 2

ORGI

Technical Bulletin 54

Belgium

Association Royale Des Gaziers Belges

Societe Technique De LʼIndustrie

Du Gaz En Belgique A.S.B.L Test Report LDG/95/2166-2170 December 1995

Australia / New Zealand

AG 200 Series

AG216, Approval Requirements for limited flexibility connectors for gas. Certificate #5531

AG 212

Approval Requirements for Quick Disconnect Devices Certificate #5306

The Australian Gas Association

A.C.N. 004 206 044

Australian Liquefied Petroleum

A.C.N. 002 703 951

AS / NZS 1869:1996

Hose and Hose Assemblies for liquefied petroleum gases (LP Gas), natural gas, and town gas

Denmark

Danish Government Gas Institute

Type-examination certificate #DG-3419, Flexible Metal Hose Type-examination certificate #DG-3420, Flexible Metal Hose Type-examination certificate #DG-3421, Quick Disconnect Coupling Type-examination certificate #DG-3422, Ball Valve

USA

Canadian Standards Association

NSI Z21.24 Connectors For Gas Appliances ANSI Z21.69 Connectors For Movable Gas Appliances ANSI Z21.15 Manually Operated Gas Valve For Appliances,

Appliance Connector Valves And Hose End Valves

ANSI Z21.41 Quick Disconnect Devices For Use With Gas Fuel ANSI Z21.18 Gas Appliance Pressure Regulators ANSI Z21.75 Connectors For Outdoor Appliances and

anufactured Homes

ANSI B16.44 Valves (Gas) – 3371-92 Manually Operated

For Use in House Piping Systems

ANSI Z21.90 Gas Convenience Outlets And Optional Enclosures

Additional Certifications

NSF/ANSI 169 Special Purpose Food Equipment and Devices City of New York MEA #379-92-M and #376-92-M

IAPMO TS9 Gas Supply Connectors for Manufactured Homes

Approved by the Commonwealth of Massachusetts Board of State Examiners of Plumbers and Gas Fitters.

Commonwealth of Massachusetts code requirements:

• Connector length may not exceed 36''

• Lever handle valves are not permitted

Meets the Requirements of:

ANSI Z223.1/NFPA54 National Fuel Gas Code

ICC / AGA International Fuel Gas Code

Uniform Plumbing Code

UL567

Pipe Connectors for Flammable and Combustible Liquids and LP-Gas. For use with natural gas and propane

Canada

Canadian Standards Association

CGA 6.10 Connectors For Gas Appliances CSA 6.16 Connectors For Movable Gas Appliances CAN / CGA 6.9 Quick Disconnect Devices For Use With Gas Fuel CAN / CGA 6.3 Gas Appliance Pressure Regulators CSA 6.27 Connectors For Outdoor Appliances and

Manufactured Homes

Meets the requirements of:

CSA B149.1 Natural Gas and Propane Installation Code

CUS

®

CUS

®

Certifications

This is a representative list of certifications carried by Dormont Manufacturing. Not all products carry all certifications. Product certifications are listed on the applicable product page. Contact Dormont Manufacturing at 1-800-DORMONT for additional information.

1-800-DORMONT

www.dormont.com

Page 35

Display-38

The Display-38 is a versatile P.O.P. display rack that is perfect for counter areas, retail store locations or as a trade show booth display.

The Display-38 features an attractive but tough powder-coat finish and comes with both Wholesale and color-coded Retail header signs. The built-in header panel eliminates flimsy foam-core signs and their mounting clips or magnets. Product can be displayed on standard peghooks or with ganghooks available from Dormont. (see below).

The D-38 ships in a 2' x 4' flat box, making it easy to transport by car. Setup takes less than 10 minutes and requires no tools.

Typical Wholesale Display

Typical Retail Display

Ganghooks

Ganghooks from Dormont are the ideal way to stock and display bulk gas connectors. Ganghooks can be used on any standard pegboard or slatwall or as part of a Dormont D-38. All ganghooks feature a flow-capacity chart and sizing information for quick in-store reference.

Display-32 – 10, 20, 30 , and 50 Series

(12) 3/8'', (2) 1/2'', (16) 5/8'', (6) 1'' and (5) 1-1/4''

Display-35 – 20 and 30 Series

(27) 1/2'' and (32) 5/8''

Display-36 – 30. 40 and 50 Series (High BTU)

(18) 5/8'', (16) 1'' and (12) 1-1/4''

1-800-DORMONT

www.dormont.com

Page 36

Dormont Products for Commercial Kitchens

The Dormont Manufacturing name is well known in commercial kitchens, where our Safety

System and hotels. Dormont offers a complete line of commercial gas connectors and faucets, certified for safety and quality. Dormont commercial products are available from your local authorized Dormont Representative.

Dormont Safety System

standard for commercial-grade moveable gas connectors. Millions of users count on the quality and safety of The Blue Hose every day. Dormont enhances that legendary quality with innovative products such as 360° swivels, one-handed quick-disconnects and locking protection valves. For the complete Safety System product offering, request the Dormont Foodservice catalog.

and Power Force brands can be found in millions of restaurants, schools, hospitals

– The Blue Hose

from Dormont Manufacturing is the industry

The one-handed quick-disconnect

The quick-disconnect protection valve

2 YEAR WARRANTY!

PowerForce – As an established leader in commercial kitchen products, Dormont Manufacturing also proudly offers the PowerForce line of commercial faucets, drains and pre-rinse assemblies. Dormont’s commitment to quality is reflected in the 2 year warranty that all PowerForce products carry; the best in the industry. Dormont also offers a full range of PowerForce replacement parts and accessories. For the complete product offering, request the Dormont Manufacturing PowerForce catalog.

These faucet components are tested and certified by WQA against NSF/ANSI 61, Section 9 and ASME A112.18.1

The maximum movement swivel

A Subsidiary of Watts Water Technologies, Inc.

6015 Enterprise Drive, Export, PA 15632 • 1-800-DORMONT • www.dormont.com • FAX: 724-733-4808

RESCat, Rev. 4, 11/08