Dormont 40, 50, 60 User Manual

1-800-DORMONT

www.dormont.com

3/8'' OD Flare x 3/8'' MIP (Tapped 1/4'' FIP) 90-1021 25 3.0 $2.74 3/8'' OD Flare x 1/2'' MIP (Tapped 3/8'' FIP) 90-1031 25 5.0 4.03

3/8'' OD Flare x 3/8'' FIP 90-1022 25 3.0 2.20 3/8'' OD Flare x 1/2'' FIP 90-1032 25 4.0 3.76

3/8'' OD Flare x 3/8'' MIP Elbow 95-1021 25 4.2 5.84 3/8'' OD Flare x 1/2'' MIP Elbow 95-1031 25 4.4 8.87

1/2'' OD Flare x 3/8'' MIP (Tapped 1/4'' FIP) 90-2021 25 4.0 $3.52 1/2'' OD Flare x 1/2'' MIP (Tapped 3/8'' FIP) 90-2031 25 5.5 3.14 1/2'' OD Flare x 3/4'' MIP (Tapped 1/2'' FIP) 90-2041 25 5.5 5.70

1/2'' OD Flare x 3/8'' FIP 90-2022 25 3.3 3.00 1/2'' OD Flare x 1/2'' FIP 90-2032 25 4.3 3.01 1/2'' OD Flare x 3/4'' FIP 90-2042 25 5.5 4.21

Gas Fittings 10, 20, and 30 Series Category C

Price

Each Piece

Part #

Description

Range – 30 Series Fittings for 5/8'' OD Connectors

5/8'' OD Flare (15/16'' - 16 thread) x 1/2'' MIP (Tapped 3/8'' FIP) 90-3031 25 5.5 $3.61 5/8'' OD Flare (15/16'' - 16 thread) x 3/4'' MIP (Tapped 1/2'' FIP) 90-3041 25 6.8 4.72

5/8'' OD Flare (15/16'' - 16 thread) x 1/2'' FIP 90-3032 25 5.0 3.45 5/8'' OD Flare (15/16'' - 16 thread) x 3/4'' FIP 90-3042 25 5.3 4.47

5/8'' OD Flare (15/16'' - 16 thread) x 3/4'' FIP Elbow 95-3042 25 6.8 8.96

Pack

Qty.

Approx.

Pack Wt.

Lbs.

Dryer – 20 Series Fittings for 1/2'' OD Connectors

Water Heater, Gas Log & Wall Heater – 10 Series Fittings for 3/8'' OD Connectors

Price

Each Piece

Part #

Description

Pack

Qty.

Approx.

Pack Wt.

Lbs.

Price

Each Piece

Part #

Description

Pack

Qty.

Approx.

Pack Wt.

Lbs.

Fittings constructed of brass or zinc-plated carbon steel

1-800-DORMONT www.dormont.com

3/8'' SAE Thread (3/8'' OD) 91-1032 2011 10 0.8 $19.77

91-1010, 91ST-1010

1/2'' SAE Thread (1/2'' OD) 91-2032 2012 10 1.3 21.54 Thread (5/8'' OD) 91-2020

5/8'' SAE Thread (5/8'' OD) ------------ 2013 10 2.0 25.38

5/8'' OD (15/16'' - 16 Thread) 91-3032, 91-3042 2014 10 2.9 26.28

93-3042

Gas Fittings 40, 50 and 60 Series

Category C Flare Caps

Approx.

Description Part # Pack Pack Wt. Price

Qty. Lbs. Each Piece

40 Series - Fittings for 1'' OD Connectors

1'' OD Flare x 3/4'' MIP (Tapped 1/2'' FIP) 90-4041 10 2.8 $5.54

1'' OD Flare x 3/4'' FIP 90-4042 10 3.51 4.91

50 Series - Fittings for 1-1/4'' OD Connectors

1-1/4'' OD Flare x 1'' MIP (Tapped 3/4'' FIP) 90-5051 10 4.0 $12.13

1-1/4'' OD Flare x 1'' FIP 90-5052 10 3.8 11.12

60 Series - Fittings for 1-1/2'' OD Connectors

1-1/2'' OD Flare x 1-1/4'' MIP (Tapped 1'' FIP) 90-6061 10 6.0 $19.80

1-1/2'' OD Flare x 1-1/4'' FIP 90-6062 10 5.7 18.92

Flare Caps

Pack Approx. Pack

Description For Connector Valve Part # Qty. Pack Wt. Price

Lbs.

Fittings and flare caps are constructed of brass or zinc-plated carbon steel

Approx.

Description Part # Pack Pack Wt. Price

Qty. Lbs. Each Piece

Approx.

Description Part # Pack Pack Wt. Price

Qty. Lbs. Each Piece

IMPORTANT: The National Fuel Gas Code (ANSI Z223.1) requires each outlet, including a valve, be closed gas tight with a threaded plug or cap immediately after installation and until equipment is connected, and when equipment is disconnected from an outlet and the outlet is not to be used again immediately.