dormakaba EAD RMS0001 Integration Manual

Integration Manual for the Kaba MiFare RFID Reader
Module

FCC ID NVI-RMS0001

About this manual

Validity

This manual describes the MiFare RFID Reader Module into hosts, e.g. KABA B-web 93 00

Addressees

This manual is written exclusively for specialists.

The descriptions in this manual are intended for personnel trained by the manufacturer. The
information in this manual cannot substitute the product training.

The contents of this manual is intended for use by the following groups of people:

 Project manager

Project manager who is responsible for the system and entrusted with project
planning and realization.

 Fitter

Person specialized in mounting and installation.
Person who has an adequate technical training and sufficient experience and who
has been authorized by the manufacturer after completing the training on the product.

 Service technician

Specialist for initial set-up and maintenance of the installation.
Person who has an adequate technical training and sufficient experience and who
has been authorized by the manufacturer after completing the training on the product.

 Network administrator

Realizes the set-up of the device within the network and makes sure that the devices
are accessible within the network.

 Software partner

Specialists for connecting the system to the user software by defining operating and
booking sequences, programming the customer applications and setting the
parameters of the devices.

NOTICE!
For reasons of device safety, some of the activities might only be carried out by the

SERVICE PERSON.

Only persons of the groups "Fitter" and "Service technician" have the status of a SERVICE
PERSON according to DIN EN 60950-1:2006.

Contents and purpose

The contents are limited to the assembly and installation of the hardware.