Dorel Asia Baby Relax DA7760B3W, Baby Relax DA7760B3 User Manual

Model No:

UPC CODE:

Lot number:

(TAKEN FROM CARTON)

_____________________________________

THIS INSTRUCTION BOOKLET

_______ / _______ / _______

CONTAINS IMPORTANT SAFETY

Date of purchase:

KEEP FOR FUTURE REFERENCE.

INFORMATION. PLEASE READ AND

DOREL ASIA

0-65857-17443-5

NOTE:

3-IN-1 UPHOLSTERED CRIB

DA7760B3 (Gray)

DA7760B3W (White)

0-65857-17443-8

DO NOT RETURN PRODUCT TO THE STORE.

If a part is missing or damaged, contact our

customer service department. We will replace

the part FREE of charge.

Tel #: [phone]

E-Mail: [e-mail]

Fax #: [phone]

NEED HELP!

CALL US FOR ASSISTANCE

1-800-295-1980

*
*

*

*
*

*
*

*

*
*

*

*
*

*

*
*

*

NEVER use bed with children under 15 months or over 50 lbs.

*

ALWAYS follow assembly instructions.

*

*

NEVER suspend strings over a bed.

*

*

CAUTION

CUSTOMER SERVICE

If you are missing parts or have any questions about this product, contact our customer service representative first!

CALL 1-800-295-1980

You can also order parts by writing to the address listed below. Please include the product model
number, color and a detailed description of the part.

Customer Service Department No. 413

12345 Albert-Hudon Boulevard, Suite 100

Montreal, Quebec

Canada, H1G 3L1

E-MAIL: [e-mail]

WARNING

Failure to follow these warnings and assembly instructions could result in serious injury or death.

Read all instructions before assembling crib. KEEP INSTRUCTIONS FOR FUTURE USE.

Check this product for damaged hardware, loose joints, loose bolts or other fasteners, missing parts or
sharp edges before assembly and frequently during use. Securely tighten loose bolts and other
fasteners. DO NOT use crib if any parts are missing, damaged or broken. Contact a customer service
representative at 1-800-295-1980 for replacement parts and instructional literature if needed. DO NOT

Infants can suffocate on soft bedding. Never add a pillow or comforter. Never place additional
padding under an infant.

Stop using the crib when child begins to climb out or reaches the height of 35 inches (89 cm).

To reduce the risk of SIDS, pediatricians recommend healthy infants be placed on their backs to sleep,
unless otherwise advised by your physician.

DO NOT place crib near window where cords from blinds or drapes may strangle a child.

Strings can cause strangulation! DO NOT place items with a string around a child's neck, such as hood
strings or pacifier cords. DO NOT suspend strings over a crib or attach strings to toys.

To help prevent strangulation tighten all fasteners. A child can trap parts of the body or clothing on
loose fasteners.

If refinishing, use a non-toxic finish specified for children's products.

When child is able to pull to standing position, set mattress to lowest position and remove bumper pads,
large toys and other objects that could serve as steps for climbing out.

Never use plastic shipping bags or other plastic film as mattress covers because they can cause

Replace teething rail if damaged or loose (if teething rail is provided for this model).

CAUTION: ANY MATTRESS USED IN THIS CRIB MUST BE AT LEAST 27-1/4 INCHES BY 51-5/8 INCHES (69CM BY
131CM) WITH A THICKNESS NOT EXCEEDING 6 INCHES (15CM).

Infants can suffocate in gaps between crib sides and a mattress that is too small.

Follow warnings on all products in a crib.

INFANTS HAVE DIED IN TODDLER BEDS FROM ENTRAPMENT. Openings in and between bed parts can
entrap head and neck of a small child.

STRANGUALTION HAZARD. NEVER place bed near windows where cords from blinds or drapes may
strangle a child.

NEVER place items with a string, cord, or ribbon around a child's neck, such as hood strings or pacifier
cords. These items can catch on bed parts.

ENTRAPMENT HAZARD. To avoid dangerous gaps, any mattress used on this bed shall be a full-size crib
mattress at least 51-5/8 inches (1310 mm) in length, 27-1/4 inches (690 mm) in width, and a max
thickness of 6 inches (150 mm).

*

*

*

*

*

*

*

NOTES

Ensure all parts and components are present before beginning assembly.

Assemble on a soft, smooth surface to prevent damage to product finish.

Phillips head screw driver is not included.

DO NOT use power tools.

CAUTIONS: Adult assembly required.

LIMITED WARRANTY

Dorel warrants its product to be free from defects in material and workmanship and agrees to
remedy any such defect. This warranty covers 1 year from the date of original purchase. This
warranty is valid only upon presentation of proof of purchase. This is solely limited to the repair or
replacement of defective furniture components and no assembly labor is included. This warranty
does not apply to any product which has been improperly assembled, subjected to misuse or
abuse or which has been altered or repaired in any way. This warranty gives you specific legal
rights and you may also have other rights which vary from State to State.

WARNING: Should this product become damaged,

and/or components are broken or missing, DO NOT USE.

Assembly will require two people.

Estimated assembly time: 30 minutes.

CARE AND CLEANING

Dust regularly with a soft, lint-free cloth to prevent soil build-up. A damp cloth may be used
occasionally to clean surface. Dry immediately. Do not use any abrasives that may damage finish.
Excessive exposure to sunlight and extreme changes in temperature and moisture can damage
wood furniture.

MAINTENANCE

Check bolts/screws periodically and tighten them if necessary.

1 2

3 4

5 6

7 8

Ø10 * 35 mm

11 * 13 * 20 mm

WOODEN DOWEL

PLASTIC BLOCK

4 PCS

4 PCS

3-IN-1 UPHOLSTERED CRIB

DA7760B3W & DA7760B3

HARDWARE LIST

8 PCS

16 PCS

BOLT

MATTRESS SUPPORT BOLT

4mm x 110

Ø1/4" * 13 * 60 mm

Ø1/4" * 11 * 1.2 mm

Ø5/16" * 13 * 1.5 mm

SPRING WASHER

SPRING WASHER

16 PCS

12 PCS

Ø1/4" * 13 * 50 mm

Ø1/4" * 13 * 15 mm

BOLT

4 PCS

ALLEN KEY

1 PC

A B C

D E F

3-IN-1 UPHOLSTERED CRIB

DA7760B3W & DA7760B3

PARTS LIST

1 PC

1 PC

RIGHT SIDE PANEL

LEFT SIDE PANEL

BOTTOM RAIL

BACK PANEL

1 PC

1 PC

FRONT PANEL

1 PC

1 PC

MATTRESS SUPPORT

2PCS

1PC

2PCS

4PCS

3-IN-1 UPHOLSTERED CRIB

DA7760B3W & DA7760B3

STEP 1:

Insert wood dowels (7) into left and right side panels (B & C) as shown.
Attach the left side panel (B) to the back panel (A) with bolts (3) and spring washers (6) through
the top and center holes of back panel (A).

Secure back panel (A) to side panel (C) with bolts (2), spring washers (6) and plastic blocks (8)
as shown below. Use Allen key (1) to tighten the bolts.
Repeat this step to attach the right side panel (C) to the back panel (A).

6PCS

2 PCS

2PCS

1PC

2PCS

4PCS

6PCS

2 PCS

3-IN-1 UPHOLSTERED CRIB

DA7760B3W & DA7760B3

Insert wood dowels (7) into the left and right side panels (B & C) as shown.

Attach front panel (E) to the left and the right side panels (B & C) with bolts (3) and spring
washers (6) through the top and center holes of front panel (E).

Secure front panel (E) to side panels (B & C) with bolts (2), spring washers (6) and plastic blocks
(8) as shown below. Use Allen key (1) to tighten the bolts.

STEP 2:

4 5

3-IN-1 UPHOLSTERED CRIB

DA7760B3W & DA7760B3

STEP 3:

16PCS

16PCS

Attach the mattress support (D) to the left and the right side panels (B &C) with
mattress support bolts (4) and spring washers (5). Use Allen key (1) to tighten the
bolts.

CORRECT

* Tabs on corners of

mattress support should

point up.

CORRECT

"THIS SIDE UP" label

shows which side to

face upward.

NOTE: The above photos and drawings showing how to properly attach the

mattress support are for reference only. Crib styles and colors will vary.

2PCS

2PCS

2PCS

* The day bed is not intended for children under 15 months of age or over 50 pounds (22.7 kgs).

* Any mattress used in this crib must be at least 27-1/4 inches by 51-5/8 inches
(69cm by 131cm) with a thickness not exceeding 6 inches (15cm).

DAY BED ASSEMBLY INSTRUCTION: STARTING FROM CRIB

STEP 1: Follow step 1 of the crib assembly instruction.

STEP 2: Follow steps 2 to 4 of the day bed assembly instruction located above (starting

from crib).

3-IN-1 UPHOLSTERED CRIB

DA7760B3W & DA7760B3

WARNINGS:

2PCS

DAY BED ASSEMBLY INSTRUCTION: STARTING FROM SCRATCH

STEP 1: Detach the front panel (E) and mattress support (D) from the side panels (B) (C)

with Allen Key (1).

STEP 4: Ensure all bolts are tightly secured.

STEP 3: Attach the mattress support (D) to the left and the right side panels (B&C) in lowest

position with mattress support bolts (4) and spring washers (5). Use Allen key (1) to
tighten the bolts.

STEP 2: Insert wood dowels (7) into left/right side panel (B&C). Attach bottom rail (F) to side panels
(B&C) using bolts (2) with spring washers (6) and plastic block (8). Use Allen Key (1) to tighten
all bolts.

3-IN-1 UPHOLSTERED CRIB

DA7760B3W & DA7760B3

CAUTION: This unit is intended for use only with the

products and/or maximum weights indicated. Use with

other products and/or products heavier than the maximum

weights indicated may result in instability or cause possible

injury.

That's it ! You've finished assembling your 3-IN-1 crib.

Stop using crib when child begins

to climb out or reaches the

height of 35.4 in. (90 cm).

ANY MATTRESS USED IN THIS CRIB

MUST BE AT LEAST 27-1/4 INCHES BY

51-5/8 INCHES (69CM BY 131CM)

WITH A THICKNESS NOT EXCEEDING

The DAY BED is not intended for

children under 15 months of age

or over 50 pounds.

DO NOT RETURN PRODUCT TO THE STORE.

If a part is missing or damaged, contact our customer

service department. We will replace the part FREE of

charge.

Tel #: [phone]

E-Mail: [e-mail]

Fax #: [phone]

Maximum weight not to exceed 50

pounds when used as a crib.

NEED HELP!

CALL US FOR ASSISTANCE

1-800-295-1980