Dorel NIGHTSTAND DL8417-7 Instruction Manual
Model No:
UPC CODE:
NOTE:
Lot number:
(TAKEN FROM CARTON)
_____________________________________
CONTAINS IMPORTANT SAFETY
INFORMATION. PLEASE READ AND
Date of purchase:
_______ / _______ / _______
KEEP FOR FUTURE REFERENCE.
THIS INSTRUCTION BOOKLET
0-65857-19829-4
INSTRUCTION MANUAL
DL8417-7
NIGHTSTAND
DO NOT RETURN PRODUCT TO THE RETAILER.
If a part is missing or damaged, contact our customer service
department. We will replace the part FREE of charge.
Tel #: 1-800-295-1980
E-Mail: das@dorel.com
NEED HELP!
CALL US FOR ASSISTANCE
1-800-295-1980
* Ensure all parts and components are present before beginning assembly.
* Assemble on a soft, smooth surface to prevent damage to the product finish.
* Read all instructions before use.
*
DO NOT use power tools.
* CAUTION: Adult assembly required.
* Assembly may require two people.
* Estimated assembly time is 45-60 minutes
Canada, H1G 3L1
NOTES AND INSTALLATION
CUSTOMER SERVICE
WARNING: Should this product become damaged, and/or
components are broken or missing, DO NOT USE.
Dust regularly with a soft, lint-free cloth to prevent soil build-up. A damp cloth may be used occasionally to clean surface.
Dry immediately. Do not use any abrasives that may damage finish. Excessive exposure to sunlight and extreme changes in
temperature and moisture can damage wood furniture.
Check bolts/screws periodically and tighten them if necessary.
Dorel warrants its product to be free from defects in material and workmanship and agrees to remedy any such defect. This
warranty covers 1 year from the date of original purchase from authorized retailers. This warranty is valid only upon
presentation of proof of purchase. This is solely limited to the repair or replacement of defective furniture components and no
assembly labor is included. This warranty does not apply to any product which has been improperly assembled, subjected to
misuse or abuse or which has been altered or repaired in any way. The warranty does not cover wearing, tearing, fading or
splitting of the fabric (where applicable). This warranty gives you specific legal rights and you may also have other rights
which vary from State to State or Province to Province.
1-YEAR LIMITED WARRANTY
CARE, CLEANING AND MAINTENANCE
Montreal, Quebec
12345 Albert-Hudon Boulevard, Suite 100
Dorel Living - Customer Service Department
You can also contact us by writing to the address listed below. Please include the product model number, color and a detailed description of your
enquiry.
HARDWARE LIST
1 2 3
4 5 6
7 8
9 10 11
12 13 14
BOLT
14 PCS
Ø1/4" X 40mm
Ø8 X 4 X 35mm
Ø8 X 8mm
SCREW
4 PCS
PLASTIC BARREL NUT
4 PCS
SCREW
22 PCS
BOLT
2 PCS
Ø8 X 4 X 30mm
KNOB
2 PCS
SCREW
2 PCS
Ø9 X 4 X 20mm
CAM BOLT
10 PCS
WOOD DOWEL
6 PCS
NIGHTSTAND
DL8417-7
Ø8 X 30mm
Ø6 X 20mm
ALLEN KEY
1 PC
CAM BOLT
6 PCS
WOOD DOWEL
18 PCS
CAM LOCK
10 PCS
CAM LOCK
6 PCS
M3 X 15mm
S
PARTS LIST
A B C D
E F G H
I J K L
M N O P
Q
2 PCS
BASE CONNECTING RAIL
LEFT SIDE PANEL
1 PC
1 PC
1 PC
BACK TOP RAIL
1 PC
1 PC
RIGHT SIDE PANEL
NIGHTSTAND
DL8417-7
1 PC
1 PC
1 PC
1 PC
DRAWER BOTTOM RAIL
DRAWER FRONT
BACK BOTTOM PANEL
DRAWER BOTTOM
BACK TOP PANEL
1 PC
DRAWER BACK
1 PC
BOTTOM PANEL
1 PC
BASE TOP RAIL
DRAWER LEFT SIDE
TOP PANEL
1 PC
BASE BOTTOM RAIL
1 PC
1 PC
DRAWER RIGHT SIDE
FRONT & BACK RAIL
2 PCS
STEP 1
NIGHTSTAND
DL8417-7
Insert cam bolt (1) into the left and right side panel (B & C) using a Phillips head screwdriver (not
included) as shown.
B
1
C
1
6 PCS
1
STEP 2
NIGHTSTAND
DL8417-7
Insert cam locks (2) and wood dowels (3) into the front and back rails (D), back top rail
(E) and side panels (B & C) as shown.
Attach the rails (D & E) to side panels (B & C).
Secure the rails and panel by rotating the cam locks (2) 1/2 turn clockwise using a Phillips head
screwdriver (not included).
D
E
D
B
3
C
2
3
2
6 PCS
6 PCS
STEP 3
NIGHTSTAND
DL8417-7
Insert wood dowels (3) into the bottom panel (N) as shown.
Attach base connecting rails (Q) to bottom panel.
Attach base rails (O & P) to bottom panel (N) with bolts (8).
Use Allen key (7) to tighten the bolts.
P
8
O
N
N
Q
3
7
Q
10 PCS
8
4 PCS
3
STEP 4
NIGHTSTAND
DL8417-7
Insert wood dowels (3) into the side panels (B & C) as shown.
Attach bottom panel (N) to the side panels (B & C) with bolts (8).
Use Allen key (7) to tighten the bolts.
3
C
N
8
B
7
3
8
C
N
4 PCS
8
4 PCS
3
STEP 5
NIGHTSTAND
DL8417-7
Insert cam bolts (1) into the top panel (A) as shown.
Insert cam locks (2) and wood dowels (3) into the left and right side panel (B & C) as shown.
Attach top panel (A) to side panels. Secure top panel (A) by rotating the cam locks (2) on side panel (B & C) 1/2 turn
clockwise using a Phillips head screwdriver (not included).
Further secure top panel (A) to the unit with screws (11). Use a Phillips head
screwdriver (not included) to tighten screws.
1
4 PCS
2
4 PCS
2 PCS
11
4 PCS
3
3
A
11
1
2
A
STEP 6
NIGHTSTAND
DL8417-7
Attach back top panel (F) and back bottom panel (G) to the assembled unit with
screws (14) as shown.
Use a Phillips head screwdriver (not included) to tighten the screws.
F
G
STEP 7
NIGHTSTAND
DL8417-7
Insert cam bolts (4) into the drawer front (H) as shown.
Insert wood dowels (6) and cam locks (5) into the drawer left and right sides (I & J) as shown.
Secure the drawer sides (I & J) to drawer front (H) by rotating the cam locks (5)1/2 turn clockwise using
a Phillips head screwdriver (not included).
S
6
4 PCS
4 PCS
4
5 PCS
5
S
S
6
H
5
4
6
H
5
4
5
J
I
S
S
STEP 8
Slide the drawer bottom (L) into the grooves of drawer left and right sides and drawer front.
Insert wood dowel (6) and cam lock (5) into the drawer bottom rail (M) as shown in figure 1.
Secure drawer bottom rail (M) to drawer front by rotating the cam lock (5) 1/2 turn clockwise
using a Phillips head screwdriver (not included).
Insert cam bolt (4) into drawer back (K) as shown in figure 2.
Insert wood dowel (6) and cam lock (5) into the drawer bottom rail (M) as shown in figure 2.
Attach drawer back (K) to the drawer sides with screws (12) and plastic barrel nuts (13). Secure
drawer bottom rail (M) to drawer back (K) by rotating the cam lock (5) 1/2 turn clockwise using a
Phillips head screwdriver (not included).
NIGHTSTAND
DL8417-7
1 PC
4 PCS
S
6
2 PCS
13
5
12
4
4 PCS
2 PCS
13
K
6
Figure 2
* USE FLAT HEAD
SCREWDRIVER (NOT
INCLUDED) TO ALIGN
PLASTIC BARREL
NUT WITH SCREW.
13
L
12
4
13
12
K
M
12
5
L
6
Figure1
M
5
STEP 9
NIGHTSTAND
DL8417-7
Insert the drawer into the assembled unit.
Attach knobs (10) with bolts (9) using a Phillips head screwdriver (not included).
2 PCS
10
2 PCS
9
10
9
Loading...