Dorcy 41-4225 User Manual
OWNER’S INSTRUCTIONS
Part #41-4225
IMPORTANT SAFETY INSTRUCTIONS
Save these instructions
Danger - To reduce the risk of electrical shock or fire, follow these instructions.
Read all instructions before using.
ONLY USE the charger that is supplied with this Worklight.
DO NOT disassemble worklight. There are no user serviceable parts.
STOP!
If you have problems with this work light, do not return to the store. For help contact Dorcy
International at www.dorcy.com or 614-497-5830 and ask to speak with Customer Service,
reference part #41-4225.
Thank you for purchasing the world’s brightest portable LED work light. It will provide you with
years of excellent service. The Dorcy Cyber Work light uses the latest LED technology to
provide over 400 Lumens of bright light for up to 2 continuous hours on a single charge even
longer if used intermittently.
The Dorcy LED Cyber Work Light takes advantage of leading LED technology to produce
more light where you want through the use of Dorcy’s exclusive Broad Beam technology™.
With Broad Beam, you never have to move the light to get the bright spot over the area you
are working on. That is because it is all bright! Broad Beam provides edge-to-edge uniform
brightness across the entire work area with over 400 Lumens of light spread over nearly 100
square feet!
4 Super Bright LED’s each producing over 100 Lumens combined with the Work lights’
reflector result in the most useful lighting device you have ever owned.
Operation:
Push the on/off switch to turn the unit on. All 4 LEDs will come on at one time.
Swivel Hook: Swivel hook can rotate 360 degrees
Magnets:
Magnets will adhere to most metal surfaces. (not stainless steel). Caution should be used on
painted surfaces as scratches may occur.
Care and Cleaning:
While Worklight is unplugged, use a soft cloth dampened with water to clean the lens and
other surfaces. Do not use any solvents to clean worklight.
DO NOT submerse in water, as this will damage the unit and void the warranty.
Charging:
Plug the smaller end of the AC cord into the charging port located behind the rubber dust
cover. Plug the AC Charging unit into any household outlet. While charging, the Red LED
will illuminate. This LED will remain on as long as the unit is plugged in and will not go off
when fully charged. It will take up to 8 hours to recharge the batteries if they are fully
discharged.
IMPORTANT: Do not leave the unit on the charger for more than 8 hours as damage may
occur and your warranty will be voided.
Warranty: (Excluding batteries) This product is warranted to be free from defect in material or
workmanship for one year from date of purchase. If product is defective, please return to
Dorcy for repair or replacement.
STOP!
If you have problems with this work light, do not return to the store. For help contact Dorcy
International at www.dorcy.com or 614-497-5830 and ask to speak with Customer Service,
reference part #41-4225.
Loading...