Page 1
Shenzhen SEM.Test Technology Co., Ltd.
1/F, Building A, Hongwei Industrial Park, Liuxian 2nd
Road, Bao'an District, Shenzhen, P.R.C. (518101)
Safety Data Sheet (SDS)
For
HUIZHOU FIRSTPOWER TECHNOLOGY CO., LTD.
TaiYangAo Industrial Zone BaiHua Town,HuiDong GuangDong Province P.R, China.
Guangdong, China
and for their product
Lead Acid Battery
Model/type reference ........................... : FP1223A
Trademark ........................................... : N/A
Safety Data Sheet
Nominal Voltage…………………….: 12V
Typical Capacity…….......………….: 2300mAh, 27.6Wh
Weight…….......…….............…….: 829.0g
L: 98.0mm
Shape and Physical Dimension
(mm)………………………………..:
Version number…………………….: V1.0
Preparation Date……………..…….: October 29, 2015
Revision date………………………..: N/A.
Laboratory ........................................... :
Address ................................................ :
W: 69.7mm
T:47.3mm
Shenzhen SEM.Test Technology Co., Ltd.
1/F, Building A, Hongwei Industrial Park, Liuxian 2nd
Road, Bao'an District, Shenzhen, P.R.C. (518101)
Compiled by (name+ signature) ....... :
Approved by (name+ signature) ....... :
Report No.:STR15069200S Page 1 of 10
Horse Kang
Ailis Ma
Page 2
Shenzhen SEM.Test Technology Co., Ltd.
1/F, Building A, Hongwei Industrial Park, Liuxian 2nd
Road, Bao'an District, Shenzhen, P.R.C. (518101)
Safety Data Sheet
1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE
COMPANY/UNDERTAKING
Product Identifier
Product name: Lead Acid Battery
Other means of identification
Recommended use of the chemical and restrictions on use
a) Do not dismantle, open or shred secondary cells or batteries.
b) Do not expose cells or batteries to heat or fire. Avoid storage in direct sunlight.
c) Do not short-circuit a cell or a battery. Do not store cells or batteries haphazardly in a box or drawer where
they may short-circuit each other or be short-circuited by other metal objects.
d) Do not remove a cell or battery from its original packaging until required for use.
e) Do not subject cells or batteries to mechanical shock.
f) In the event of a cell leaking, do not allow the liquid to come in contact with the skin or eyes. If contact has
been made, wash the affected area with copious amounts of water and seek medical advice.
g) Do not use any charger other than that specifically provided for use with the equipment.
h) Observe the plus (+) and minus (–) marks on the cell, battery and equipment and ensure correct use.
i) Do not use any cell or battery which is not designed for use with the equipment.
j) Do not mix cells of different manufacture, capacity, size or type within a device.
k) Battery usage by children should be supervised.
l) Seek medical advice immediately if a cell or a battery has been swallowed.
m) Always purchase the battery recommended by the device manufacturer for the equipment.
n) Keep cells and batteries clean and dry.
o) Wipe the cell or battery terminals with a clean dry cloth if they become dirty.
p) Secondary cells and batteries need to be charged before use. Always use the correct charger and refer to the
manufacturer’s instructions or equipment manual for proper charging instructions.
q) Do not leave a battery on prolonged charge when not in use.
r) After extended periods of storage, it may be necessary to charge and discharge the cells or batteries several
times to obtain maximum performance.
s) Retain the original product literature for future reference.
t) Use only the cell or battery in the application for which it was intended.
u) When possible, remove the battery from the equipment when not in use.
v) Dispose of properly.
Details of the supplier of the safety data sheet:
Supplier Name: HUIZHOU FIRSTPOWER TECHNOLOGY CO., LTD.
Address: TaiYangAo Industrial Zone BaiHua Town,HuiDong GuangDong Province P.R, China.
Telephone number of the supplier: 0086-0752-8592666
Emergency Telephone No.(24h): 0086-0752-8592666
Fax: 0086-0752-8592621
Postcode: 518000
Model: RT1270
Synonyms:none
Recommended Use:Used in portabl electronic equipments;
Uses advidsed against:
Report No.:STR15069200S Page 2 of 10
Page 3
E-mail address: aftersales@efirstpower.com
Emergency telephone number
Company Emergency Phone Number: 0086-0752-8592666
Shenzhen SEM.Test Technology Co., Ltd.
1/F, Building A, Hongwei Industrial Park, Liuxian 2nd
Road, Bao'an District, Shenzhen, P.R.C. (518101)
2. HAZARDS IDENTIFICATION
Safety Data Sheet
Classification
No harm at the normal use. If contact the Electrolyte liquid in the Lead Acid Battery, reference as follows:
Classification of the substance or mixture
Classification according to GHS
Acute Toxicity, Oral(Hazard category 4)
Acute Toxicity, Dermal(Hazard category 3)
Skin, irritate(Cagegory 1B)
Eye Irritate (Hazard category 1)
GHS Label elements, including precautionary statements:
Signal word: Warning
Hazard statement(s):
H242:Heating may cause a fire;
H311: Toxic in contact with skin;
H314:Causes severe skin burns and eye damage;
H302:Harmful if swallowed;
precautionary statements:
Prevention:
P264 Wash thoroughly after handling.
P270 Do not eat, drink or smoke when using this product.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
Response:
P312:Call a Poison center or doctor/physician if you feel unwell.
P302+P350-IF ON SKIN: Gently wash with plenty of soap and water
P301+P330+P331-IF SWALLOWED: rise mouth. Do NOT induce vomiting
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if
present and easy to do. Continue rinsing.
Storage:
None
Disposal
P501: Dispose of contents/container in accordance with local/national regulations
Hazards not otherwise classified (HNOC)
Not Applicable
Other information
No information available.
GHS02 GHS05 GHS06
Report No.:STR15069200S Page 3 of 10
Page 4
Shenzhen SEM.Test Technology Co., Ltd.
1/F, Building A, Hongwei Industrial Park, Liuxian 2nd
Road, Bao'an District, Shenzhen, P.R.C. (518101)
Safety Data Sheet
3. COMPOSITION/INFORMATION ON INGREDIENTS
Chemical characterixation: Mixtures
Description:
Product: Consisting of the following components.
Common Chemical Name
Concentration
(%)
Lead 70 7439-92-1 231-100-4
Sulfuric acid 20 7664-93-9 231-639-5
Epoxy resins 10 61788-97-4 ----
Note: CAS number is Chemical Abstract Service Registry Number.
N/A=Not apply.
CAS Number EC No.
4. FIRST-AID MEASURES
First aid measures
Eye Contact Rinse thoroughly with plenty of water, also under the eyelids. If symptoms persist, call a
physician.
Skin Contact Remove contaminated clothing and shoes. Wash skin with soap and water. In the case of skin
irritation or allergic reactions see a physician.
Inhalation Move to fresh air. If symptoms persist, call a physician.
Ingestion Do NOT induce vomiting. Drink plenty of water. If symptoms persist, call a physician.
Most important symptoms and effects, both acute and delayed
Swallowing Do not induce vomiting. Get medical attention.
Most Important Symptoms/Effects
Indication of any immediate medical attention and special treatment needed
Notes to Physician Treat symptomatically
No information available.
5. FIRE-FIGHTING MEASURES
Suitable Extinguishing Media
CO2, dry chemical powder, water spray.
Unsuitable Extinguishing Media:No information available.
Specific Hazards Arising from the Chemical
Formation of toxic gases is possible during heating or in case of fire.
In case of fire, the following can be released:
Carbon monoxide(CO)
Carbon dioxide
Report No.:STR15069200S Page 4 of 10
Page 5
Other irritating and toxic gases.
Hazardous Combustion Products
Carbon oxides.
Explosion Data
Sensitivity to Mechanical Impact No
Sensitivity to Static Discharge No
Protective Equipment and Precautions for Firefighters
As in any fire, wear self-contained breathing apparatus pressure-demand, MSHA/NIOSH (approved or
equivalent) and full protective gear. For example: Wear self-contained respiratory protective device. Wear
suitable protective clothing and eye/face protection.
Special hazards arising from the substance or mixture:
Battery may burst and release hazardus decomposition products when exposed to a fire situation. Lead Acid
Batteryies contain flammable electrolyte that may vent, ignite and produce sparks when subjected to high
temperature(>150℃), When damaged or abused(e.g. mechanical damage or electrical overcharging); may
burn rapidly with flare-burning effect; may ignite other batteries in clothes proximity.
Shenzhen SEM.Test Technology Co., Ltd.
1/F, Building A, Hongwei Industrial Park, Liuxian 2nd
Road, Bao'an District, Shenzhen, P.R.C. (518101)
Safety Data Sheet
6. ACCIDENTAL RELEASE MEASURES
Personal precautions, protective equipment and emergency procedures
Personal Precautions Avoid contact with eyes.
Refer to section 8 for personal protective equipment. Ensure adequate ventilation. Remove all sources of
ignition.
Evacuate personnel to safe areas.
Environmental precautions
Environmental Precautions Refer to protective measures listed in Sections 7 and 8.
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
Dispose contaminated material as waste according to item 13.
Methods and material for containment and cleaning up
Methods for Containment Prevent further leakage or spillage if safe to do so.
Methods for Cleaning up Use personal protective equipment. Dam up. Cover liquid spill with sand, earth or
other Non combustible absorbent material. Pick up and transfer to properly labeled containers. Clean
contaminated surface thoroughly.
7. HANDLING AND STORAGE
Precautions for safe handling
Handling Handle in accordance with good industrial hygiene and safety practice. Avoid contact with skin,
eyes and clothing. Wear personal protective equipment.
Wash thoroughly after handling. Use this material with adequate ventilation.
The product is not explosive.
Conditions for safe storage, including any incompatibilities
Report No.:STR15069200S Page 5 of 10
Page 6
If the Lithium-ion Battery is subject to storage for such a long term as more than 3 months, it is recommended
to recharge the Lithium-ion Polymer Battery periodically.
3 months: -10 ~+40 , 45 to 85%RH℃℃
And recommended at 0 ~+35 for long period storage.℃℃
The capacity recovery rate in the delivery state (50% capacity of fully charged) after storage is assumed to be
80% or more.
The voltage for a long time storage shall be 12V~13V range.
Do not storage Lithium-ion Battery haphazardly in a box or drawer where they may short-circuit each other
or be short-circuited by other metal objects.
Keep out of reach of children.
Do not expose Lithium-ion Polymer Battery to heat or fire. Avoid storage in direct sunlight.
Do not store together with oxidizing and acidic materials.
Keep ignition sources away- Do not smoke.
Store in cool, dry and well-ventilated place.
Incompatible Products
Shenzhen SEM.Test Technology Co., Ltd.
1/F, Building A, Hongwei Industrial Park, Liuxian 2nd
Road, Bao'an District, Shenzhen, P.R.C. (518101)
None known.
Safety Data Sheet
8. EXPOSURE CONTROLS AND PERSONAL PROTECTION
Control parameters
Ingredients with limit values that require monitoring at the workplace:
1309-60-0 Lead peroxide
TLV (USA) 0.02mg/m3
MAK (Germany) 0.1mg/m3
Other Exposure Guidelines Vacated limits revoked by the Court of Appeals decision in AFL-CIO v.
OSHA, 965 F.2d 962(11th Cir., 1992).
Appropriate engineering controls
Engineering Measures Showers
Eyewash stations
Ventilation systems
Use adequate general or local exhaust ventilation to keep airborne concentrations below the permissible
exposure limits. Ensure adequate ventilation.
Individual protection measures, such as personal protective equipment
Eye/Face Protection:
Tightly sealed goggles
Body protection:
Protective work clothing.
Skin protection:
Protective gloves
Material of gloves:
Report No.:STR15069200S Page 6 of 10
Page 7
The selection of the suitable gloves does not only depend on the material, but also on further marks of quality
and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the
resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the
application.
Penetration time of glove material:
The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be
observed.
Respiratory Protection No protective equipment is needed under normal use conditions. If exposure limits
are exceeded or irritation is experienced, ventilation and evacuation may be required.
Hygiene Measures Handle in accordance with good industrial hygiene and safety practice.
Shenzhen SEM.Test Technology Co., Ltd.
1/F, Building A, Hongwei Industrial Park, Liuxian 2nd
Road, Bao'an District, Shenzhen, P.R.C. (518101)
Safety Data Sheet
9. PHYSICAL AND CHEMICAL PROPERTIES
Form: prismatic
Physical
State
Change in condition:
pH, with indication of the concentration Not determined.
Melting point/freezing point Not determined.
Initial boiling point and Boiling range: Not determined.
Flash Point Not determined.
Evaporation rate Not determined.
Flammability (solid, gas) Not determined.
Upper/lower flammability or explosive limits Not determined.
Vapor Pressure:
Vapor Density:
relative density: Not determined.
Solubility in Water: Not determined.
Color: Black
Odour: Odourless
Odor Threshold: No information available
Not determined.
Not determined.
Solubility in other solvents Not determined.
n-octanol/water partition coefficient Not determined.
Auto-ignition temperature Product is not self-igniting.
Decomposition temperature Not determined.
Odout threshold Not determined.
Evaporation rate
Report No.:STR15069200S Page 7 of 10
Not determined.
Page 8
Viscosity Not determined.
Other Information No further relevant information available.
Shenzhen SEM.Test Technology Co., Ltd.
1/F, Building A, Hongwei Industrial Park, Liuxian 2nd
Road, Bao'an District, Shenzhen, P.R.C. (518101)
Safety Data Sheet
10. STABILITY AND REACTIVITY
Reactivity: Stable under recommended storage and handling conditions (see section 7, Handling and
storage).
Chemical stability:
Thermal decomposition/conditions to be avoided: No decomposition if used according to specifications.
Possibility of Hazardous Reactions:
Hazardous Polymerization:
Conditions to avoid:
Incompatible materials: Strong oxidizing agents. Strong acids.Base metals.
Hazardous Decomposition Products:Carbon oxides, Other irritating and toxic gases.
Stable under normal conditions of use, storage and transport.
None under normal processing.
Hazardous polymerization does not occur.
Strong heating, fire, Incompatible materials.
11. TOXICOLOGICAL INFORMATION
Acute toxiciy: No data available.
LD/LC50 values relevant for classification:
Not available.
Skin corrosion/irritation: No irritant effect.
Serious eye damage/irritation: Cause serious eye irritation.
Respiratory or skin sensitization: No sensitizing effects known.
Specific target organ system toxicity: No information available.
CMR effects(carcinogenity, mutagenicity and toxicity for reproduction): No information available.
12. Ecological Information
Toxicity:
Acquatic toxicity:
No further relevant information available.
Persistence and degradability: No further relevant information available.
Bioaccumulative potential: No further relevant information available.
Mobility in soil: No further relevant information available.
Results of PBT and vPvB assessment
PBT: Not applicable.
vPvB: Not applicable.
Other adverse effects:
No information available.
13. DISPOSAL CONSIDERATIONS
Report No.:STR15069200S Page 8 of 10
Page 9
Waste treatment methods
Recommendation: Must not be disposed together with household garbage.
Uncleaned packaging:
Recommendation: Disposal must be made according to official regulations.
Shenzhen SEM.Test Technology Co., Ltd.
1/F, Building A, Hongwei Industrial Park, Liuxian 2nd
Road, Bao'an District, Shenzhen, P.R.C. (518101)
Do not allow product to reach sewage system
Safety Data Sheet
14. TRANSPORT INFORMATION
This report applies to by sea, by air and by land;
UN/ID Number:UN2800.
The Lead acid battery according to PACKING INSTRUCTION 872 of the 2015 IATA Dangerous
th
Goods regulations 56
of Lead acid battery.
batteries offered for transport must be packed in inner packaging’s that completely enclose the battery; to
provide protection from damage or compression to the batteries, the inner packaging’s must be placed in a
strong rigid outer packaging;
The packaging shall be adequate to avoid mechanical damage during transport, handling and stacking. The
materials and pack design shall be chosen so as to prevent the development of unintentional electrical
conduction, corrosion of the terminals and ingress of moisture.
The package must be handled with care and that a flammability hazard exists if the package is damaged;
With regard to transport, the following regulations are cited and considered:
- The International Civil Aviation Organization (ICAO) Technical Instructions.
- The International Air transport Association (IATA) Dangerous Goods Regulations.
- The International Maritime Dangerous Goods (IMDG) Code (2012 Edition).
- The US Hazardous Materials Regulation (HMR) pursuant to a final rule issued by RSPA
- The Office of Hazardous Materials Safety within the US Department of Transportations’ (DOT) Research
and Special Programs Administration (RSPA)
Edition may be transported. and applicable U.S. DOT regulations for the safe transport
15. REGULATORY INFORMATION
Safety, health and environmental regulations/legislation specific for the substance or mixture
EU Regulation:
Authorisations: No information available.
Restrictions on use: No information available.
Regulatory information
CAS No. EU
(EINECS)
7439-92-1
9003-56-9
7664-93-9
1309-60-0
Report No.:STR15069200S Page 9 of 10
Listed Not listed Not listed NDSL Not listed Not listed Not listed
Listed Listed Listed DSL Listed Listed Listed
Listed Listed Listed DSL Listed Listed Listed
Not listed Listed Not listed DSL Listed Listed Listed
US
(TSCA)
Japan
(ENCS)
Canada
(DSL/
NDSL)
Austrlia
(AICS)
Korea
(ECL)
China
(IECSC)
Page 10
Shenzhen SEM.Test Technology Co., Ltd.
1/F, Building A, Hongwei Industrial Park, Liuxian 2nd
Road, Bao'an District, Shenzhen, P.R.C. (518101)
Safety Data Sheet
7440-50-8
308066-84-4
Chemical safety assessment
Not listed Listed Not listed DSL Listed Listed Listed
Listed Listed Listed DSL Listed Listed Listed
A Chemical Safety Assessment has not been carried out.
16. OTHER INFORMATION
This information is based on our present knowledge. However, this shall not constitute a guarantee for any
specific product features and shall not establish a legally valid contractual relationship.
Relevant phrases:
R20/22: Harmful by inhalation and if swallowed.
R36: Irritating to eyes.
H302: Harmful if swallowed.
H332: Harmful if inhaled.
******************End of SDS******************
Report No.:STR15069200S Page 10 of 10
Loading...