Doodle Labs NM 5500 2FN User Manual

NM-5500-2F
Rugged/Military grade 5 GHz 2x2 MIMO Wi-Fi® Radio Transceivers
Features
Qualcomm-Atheros AR9590-AR1B Chipset with Extended Temperature Range Up to 300 Mbps Throughput with 2x2 MIMO Technology Calibrated High Power 5 GHz operation (30 dBm) for Extended Range Supported Ath9k Linux Driver MiniPCIE Interface
Model No. NM-5500-2F (802.11n, ath9k driver)
11n Models – Qualcomm Atheros
MAC Chipset
Software Support
Center Frequency Range
Channel Bandwidth* 20, 40 MHz channels Radio Modulation (Auto
Adjust)
Data Rates Supported
AR9590-AR1B with Extended Temperature range for Outdoor and Rugged models)
Linux Driver
ath9k
5.180 GHz -5.240 Ghz & 5.745 GHz -5.825 Ghz This varies by the regulatory domain
BPSK, QPSK, 16 QAM, and 64 QAM (5.x GHz – 11n models)
802.11a: 6, 9, 12, 18, 24, 36, 48 and 54 Mbps (5.x GHz)
802.11n: MCS0-23 (5.x GHz)
802.11n and b/g Beam Forming
Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx), Maximal
802.11n version 2.0 Capabilities
Operating Modes
MAC Protocol
Wireless Error Correction FEC, ARQ
Wireless Data Security
FIPS Certification
Tx/Rx Specification
5 GHz (20 MHz Channel) – 11n models
802.11a, STBC BPSK 1/2 28.20 -96
802.11a, STBC 64 QAM 3/4 28.20 -81
MIMO BPSK 1/2 28.93 -94 MIMO 16 QAM 3/4 28.93 -83
MIMO 64 QAM 5/6 28.93 -72
5 GHz (40 MHz Channel) – 11n models
MIMO BPSK 1/2 27.70 -91 MIMO 16 QAM 3/4 27.70 -79
MIMO 64 QAM 5/6 27.70 -69
* It is advantageous to use the smallest Channel Bandwidth that can support the Throughput requirements. Smaller bandwidths provide more channels to choose and help avoid interference issues. The system’s SNR is higher at smaller Channel Bandwidths and Range is longer.
Antenna Signal Strength
Antenna port isolation for concurrent operation
Integrated Antenna >20 KV (Human Body Model)
Radio
Modulation
-35 dBm to -85 dBm (Recommended), (Absolute Maximum=+12 dBm)
+5 dBm signal strength for 2.4 GHz signal without degrading 5.x GHz operation
ratio combining (MRC), Cyclic shift diversity (CSD), Frame aggregation, block ACK, 802.11e compatible bursting, Spatial multiplexing, cyclic-delay diversity (CDD), low-density parity check (LDPC), Space Time Block Code (STBC)
AP, STA and Adhoc modes to implement Point to Point, Point to multi Point, and Mesh networks
TDD with Carrier Sense Multiple Access with Collision Avoidance (CSMA/CA)
128 bit AES, WEP, TKIP and WAPI hardware encryption. Support for IEEE 802.11d, e, h, i, k, r, v, w and time stamp standards
Loop back mode to facilitate FIPS AES certification, Small packet size (96 bytes) in AES encryption at full packet rate
Coding
Rate
Max Tx Power
(± 2 dB)
Rx Sensitivity
(Typ)
Loading...
+ 3 hidden pages