Donner Bath Furnishings CSI1310 Specification Sheet

Towel Ring

posts are die cast from

P5

500 –Towel Ring

Cleaning Instructions:

Stock Number:

______________________Towel Ring

Ma

terials:

Installation Instructions:

Dimensions:

Contemporary Technical Specification
Towel Ring

Stock Numbers:

q

Polished Chrome Finish
Concealed Screw Mounting
Clear Ring

q P5860 – Towel Ring

Polished Chrome Finish
Concealed Screw Mounting
Metal Ring

q P5860PB – Towel Ring

Polished Brass Finish
Concealed Screw Mounting
Metal Ring

q P5860CB – Towel Ring

Chrome & Polished Brass Finish
Concealed Screw Mounting
Metal Ring

P5500 & P5860

highest quality zinc alloy (zamac).
Castings are triple plated with a
polished brass or polished chrome
finish. 5500 ring is clear acrylic.
5860 ring is aluminum with polished
brass or polished chrome finish.

1. Remove mounting bracket from back of fixture by loosening the set
screw.

2. Position unit on wall in desired location.

3. Lightly mark the outline of the base of the unit.

4. Center mounting bracket inside the outline.

5. Mark hole locations. Attach bracket to wall using 1 3/8” screws
(provided).

6. Mount base on bracket. Tighten set screw on the bottom.

Note: Wood blocking is preferable behind all wall surfaces.

If wood blocking is not available, the following optional fasteners are
suggested: Tile/Masonry – Plastic or Lead Anchors; Plaster/Drywall –
Toggle Bolts.

To preserve the fine finish of this product, clean only with a soft
damp cloth. Dry well. Do not use commercial or abrasive cleaners.

By Creative Specialties

25300 AL MOEN DRIVE •NORTH OLMSTED, OH 44070
CORPORATE HEADQUARTERS: (800) 321- 8809 • FAX: [phone]
INTERNATIONAL: [phone] • FAX: [phone]
CUSTOMER SERVICE (USA): 800-882-0116 • FAX: [phone]
WWW.CSI.MOEN.COM

Copyright Creative Specialties International 2006

Literature #BA0994