DONGYANG Electronics XM120MCB Users Manual

Test Report No.: GETEC-E3-05-016 FCC Part 15 Subpart C Certification

APPENDIX I

: USER’S MANUAL

EUT Type : FM Transmitter (built-in 12” Motorized combo)

FCC ID.: RCDXM120MCB

25252525252526262626272728282829293030303131313232

EJECT

VOL +/-

MUTE

PLAY OR PAUSE

AUDIO

STOP

ARROWS

SETUP

DISPLAY

NUMBER BUTTONS

SUBTITLE

TITLE

SLOW

FAST REVERSE SEARCHING

FAST FORWARD SEARCHING

REPEAT A-B

REPEAT

NTSC/PAL

ANGLE

PBC

DVD Functions

668

131413

ZOOM

GOTO

17171717181818

Connection Diagram

Optional Specification

Installation

1818192020

3636363637

TV Mode

Connection diagram (TV/FM)

How to watching TV

How To Select Channels Automatically

How To Select and Delete Channels by Menual

Channel Mode Setting

FM TX

2222242323

Troubleshooting

Disc Information

242424

Specifications



Unit

Contents

Caution

Name and function of each parts

Remote Controller

Pwpre ON/OFF

Monitor Angle Adjustment

Power and Mode Selection

Mute Function

Volume Control

Mode Setting

DVD Mode

AUX (AV1/AV2) Mode

APC

CONTRAST/BRIGHT/COLOR/TINT

Picture Control

SCREEN

BASS/TREBLE/BALANCE/LOUDNESS

Volume Control

DVD Setup

Setup Menu

General Setup

TV Display

Angle Mark

OSD Lang

Captions

Screen Saver

Last Memory

Dolby Digital Setup

Audio Setup

Equalizer

Quality

Video Setup

TV Type

PBC

Audio

Subtitle

PREFERENCES

Disc Menu

Parental

Country Region

Default

Password Setup

Password Mode

Password Change

GYG#FRPER#PRQLWRU

45%#TFT-LCD#PRWRUL]HG

08/&34."/6"-

CAUTION

Changes or modifications not expressly approved by the party responsible

for compliance could void the user's authority to operate the equipment.

Watching the monitor for an

extended period of time

without the engine running

may deplete the vehicle's

battery charge.

This product is designed for

operation with a 12 Volt DC,

negative ground vehicle. It

is not suitable for operation

under other conditions or

voltages.

CAUTION

Quality installations are best

Caution

performed by qualified and

certifled installers.



Don't touch the unit there is a

flash of lightning. It may

receive an electric shock.

Do not cover or stop up heater

ducts or vents. It may be the origin

of a fire or receives an electric

shock.

Check Point

The operating temperature of this product is limited to -4ı ~ +176ı.

From time to time when your vehicle is extremely hot or cold you must allow

Your vehicle can reach temperatures up to 212ı in the summertime.

time for your air conditioner or heater to cool or heat the vehicle and for

operating temperatures to return to normal operating ranges. Your monitor will

return to its normal functions when these operating ranges are achieved.`

Your optimum picture quality is achieved when you are directly in front of the

monitor (+/-30 degrees).

Do not open covers and repair yourself. Refer servicing to qualified personnel.

DVD Players use an invisible laser beam which can cause hazardous radiation

exposure. Be sure to operate the unit correctly as instructed.

Do not cut the car power supply off while a disc is playing. It can cause

damage to the DVD Player.

5IFSFBSFUXPLJOETPGBMBSNTZNCPMTBTGPMMPXT

Please read and observe all warnings and instructions in this owner’s manual

and those marked on the unit. Retain this booklet for future reference.

Caution

The lightening flash with arrowhead symbol within an equilateral

triangle is intended to alert the user to the presence of

"dangerous voltage" within the product's enclosure that may be

of sufficient magnitude to constitute a risk of electric shock to

people.

8"3/*/(

The exclamation point within an equilateral triangle is intended

to alert the user to the presence of important operating and

maintenance (servicing) instructions in the literature accompanying

$"65*0/

the product.

Do not mount the product where

it will obstruct the deployment of

WARNING

Installation of all TV monitors

the airbag or in an area where it

would affect the vehicular control.

must be out of the driver’s

field of sight.

Also be careful to avoid mounting

the product where it can become

hazardous during sudden stops or

in the event of an accident.

Use extra caution with any liquids

Do not try and service these

products yourself, seek only

in your car. If you or your child

spill any liquid on these products,

a qualified service center or

factory sevice center.

pull your vehicle to the roadside

and turn the key off to disconnect

or wipe the products with a towel. Do not

operate the equipment until all liquids have

Be careful not to drop or

either evaporated or you have had the monitor

inspected at a service center by a qualified

apply under pressure to the

front panel of your video

technician. Severe harm or danger can

monitor. If the screen cracks

due to misuse, your warranty

be occured.

will be void!

Use only a damp cloth to clean

the screen and use only purified

water on the cloth, wring out all

Be careful not to overload your

excess water prior to wiping the

screen. Do not use any cleaners

oho c al

NZE E B

cigarette lighter plug by adding

more than one device at a time.

or chemicals to clean the screen.

In most cases a dry cloth will do!



ĶɇButton

Play/Pause button

ÿButton

Stop button

ĶĶI Button

FWD Search button

REW Search button

IĴĴButton

VOL/ADJ Button

Volume control and adjust

POWER Button

button for each menu.

Power ON/OFF button

Disc loading slot

Disc LED

AUX Input Jack

EJECT Button



Name and function of each parts

MODE Button

DVD Ą AV 1 Ą AV2

-".1

(TV function added

TVĄAV1 ĄAV2ĄDVD)

MENU Button

Remote Control Eye.

This allows transmitting of the

OSD display button

remote control's IR signals for

controlling all functions of your

DOOR LAMP Button

monitor.

ROOM LAMP Button

MENU Select Button

(When TV function add,

select the desired chennel)

Wireless Infrared Receiver.



You can hear the sound of

audio sound by using

wireless infrared headphone.

(Wireless IR headphone is optional accessory)

Name and function of each parts

Unit

EJECT button

ZOOM button

ANGLE button

ADD/DEL button

Name and function of each parts

Remote Controller (Etc Function)

If you want to use Etc button, please on the down the switch remote control.

Mute button

Monitor display adjustment button

SUBTITLE button

FWD search button

Control stick

STOP button

PBC button

Volume control button (DVD)

SETUP button

REPEAT button

AUDIO button

A-B button

Normal/DVD switch

NTSC/PAL button

A.MEMO button

Battery

 

Name and function of each parts

Remote Controller (Normal Function)

If you want to use normal button, please on the down the switch remote control.

Power button

MODE Button

DVD Ą AV 1 Ą AV2

(TV function added

TVĄAV1 ĄAV2ĄDVD)

REW Search button

Play/Pause button

Slow button

FF/FR button

PICTURE button

TITLE button

MENU button

Numberic button

GOTO button

DISPLAY button

APC button

Remote Controller

Unit

button on the remote control.

button on the unit or the VOL + /

the +/

Volume Control

Power and Mode SelectionPower and Mode Selection

Control the audio volume as your taste.

(There is no PICTURE / AUDIO Menu displayed.

1. When AV1, AV2, (TV) mode, control the audio volume by pressing

button on the Remote Control.

button on the unit or the VOL + /

the +/

2. When DVD mode, control the audio volume by pressing

but DVD mode consist of adjustable 20 steps.

୔ Volume Control consist of 50 steps,

on the remote control.

Mode Setting

Select the desired mode by pressing the MODE button on the unit or

Mode will be changed as below;

DVD ˧GAV1 ˧GAV2

When you add the TV modulator (optional),

mode will be changed as below;

DVD ˧ (TV) ˧GAV1 ˧G AV2



Power ON/OFF

Press the button on the remote control or on the unit to turn the power on

and releasing the monitor automatically.

Remote Controller



and play the audio sound.

"MUTE" on the monitor and mute the audio sound.

Monitor Angle Adjustment

Control the Monitor Angle as your taste.

Press the button to turn the power off and close the monitor automatically.

Whenever press the Ā/Ă button, monitor angles will be changed 3 steps.

Mute Function

Mute the audio sound.

1. Press the mute button on the remote control, displayed

remote control, displayed "MUTE Off" on the monitor

2. When mute is on, press the mute button again on the

WIDE

APC (Auto Picture Control)

Select the screen conditions.

Picture Contr olPower and Mode Selection

Whenever press the APC button, display condition will be changed as below;

USER

DYNAMIC

MILD

NORMAL

PICTURE

TINT

BRIGHT

COLOR

the MENU button on the unit or on the remote control.

SCREEN

CONTRAST

CONTRAST/BRIGHT/COLOR/TINT

Select the one of CONTRAST/BRIGHT/COLOR/TINT and change the picture

condition as your taste.

1. Make display menu on the screen by pressing

PICTURE

CONTRAST

BRIGHT

on the unit or control the stick up/down

2. Select the desired menu by pressing the Ā/Ă button

COLOR

TINT

on the remote control.

SCREEN

PICTURE

TINT

SCREEN

CONTRAST

BRIGHT

COLOR

button on the unit or control

the +/

the stick left/right on the remote control.

3. Control the desired screen conditions by pressing

DVD Mode

1. Select the DVD mode by pressing

the MODE button on the unit or

on the remote control.

2. Insert a disc you want to play into

the loading disc slot with label side up.

sert the disc to turn the power on and

öWhen power on or except DVD mode,

(AV2)

AV Input

 

AV Input (AV1)

GAMECAMCORDER

play the disc automatically.

AUX (AV1/AV2) Mode

1. Connect the external devices as shown below (efer Connection Diagram).

AV Output

3. Select the AV1 or AV2 mode by pressing the MODE button on the unit

2. Turn the power on the unit and external devices

or on the remote control.

4. Play the external device.

+ 14 hidden pages

DONGYANG Electronics XM120MCB Users Manual

Specifications and Main Features

Frequently Asked Questions

User Manual