Page 1
DK-8061RM User Manual
USER MANUAL
VER: 0.1
Model Name : 2.4 GHz Mini Thumb keyboard
MODEL NO. : DK-8061RM
VERSION : 0.1
DATE : 2013.08.19
Page 1 of 9
Page 2
DK-8061RM User Manual
Version.
#
Revised Date
PIC
Remark
0.1
08/19/2013
Natural
Preliminary
VER: 0.1
Page 2 of 9
Page 3
Electrical Specification
1. Operating Voltage
Keyboard supply voltage: 3V (2*AAA Battery)
2. Current Consumption
Sleep mode Current: < 0.5mA
Usual use Current: < 40mA
DK-8061RM User Manual
VER: 0.1
3. Sleeping Mode
3.1 Timing to standby mode: 10min (The time from all keys and touch point are free to the
keyboard turn to sleeping mode)
3.2 Current during the sleeping mode :< 0.5mA (finally stable the current)
3.3 Wake up: press any key of the keyboard
4. Low-voltage indicate
When the voltage below 2.1V, the LED light was flashing 3Hz, which means the power is
low. (No action during sleeping model)
5 Wireless specifications
2.408-2.474GHz frequency coverage.
GFSK RF transceiver
High Speed RF link data rate Max. 1M bit/s
Page 3 of 9
Page 4
Key Function Chart
1. The keys function as the figure shows ：
DK-8061RM User Manual
VER: 0.1
Page 4 of 9
Page 5
DK-8061RM User Manual
VER: 0.1
Operation Process
Step 1
Open the battery cover which in the back of the keyboard.
Take out the nano transceiver beside the battery box.
Insert 2 AAA battery which is environment-friendly and safety in the battery box.
Close the battery cover.
Step 2
Insert the nano transceiver in your PC’s USB HUB.
Step 3
Push the keyboard power button to ON, and then the power indication Lamp is bright once.
Keyboard power is on.
Step 4
Use the keyboard freely.
Caution
Please use the keyboard in human house only and keep away
water.
Page 5 of 9
Page 6
DK-8061RM User Manual
VER: 0.1
Children use the keyboard with guardian together is necessary.
Keep dry. Humidity, liquids, contain minerals that will corrode
electronic circuits.
Don’t use or store in dusty, dirty areas.
Don’t store in hot areas. High temperature can shorten the life of
electronic devices and warp or melt certain plastics.
Don’t store in very cold areas. Moisture can form inside the case,
which may damage electronic circuit boards.
Don’t attempt to open the case. Non-expert handling of the device
may damage the system.
Avoid dropping and strong impact.
FCC Statement
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency
Page 6 of 9
Page 7
DK-8061RM User Manual
VER: 0.1
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for
help.
To assure continued compliance, any changes or modifications not
expressly approved by the party responsible for compliance
could void the user’s authority to operate this equipment.
(Example- use only shielded interface cables when connecting to
computer or peripheral devices).
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
1) This device may not cause harmful interference, and
2) This device must accept any interference received, including
Page 7 of 9
Page 8
DK-8061RM User Manual
VER: 0.1
interference that may cause undesired operation.
Caution!
The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications to this
equipment. Such modifications could void the user authority to
operate the equipment.
Canada Statement
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including interference
that may cause undesired operation of the device.
The device meets the exemption from the routine evaluation limits in section 2.5 of
RSS 102 and users can obtain Canadian information on RF exposure and
compliance.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux
appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions
suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de
l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement.
Le dispositif rencontre l'exemption des limites courantes d'évaluation dans la section
Page 8 of 9
Page 9
DK-8061RM User Manual
VER: 0.1
2.5 de RSS 102 et les utilisateurs peuvent obtenir l'information canadienne sur
l'exposition et la conformité de rf.
Please feel free to contact information below for any questions you
have regarding your product
CONTACT
Dongguan Siliten Electronics CO.,LTD
Jiezhou Second Industrial Park，Shijie Town ，Dongguan City ，
Guangdong Province ，China
Page 9 of 9
Page 10
Dongguan Siliten Electronics CO.,LTD
Model Declaration Letter
We, the undersigning company
Company Name: Dongguan Siliten Electronics CO.,LTD
Address: Sijia Yewu Industrial estate, Shijie Town
Hereby confirm that the following products:
Product description: 2.4 GHz Mini Thumb keyboard
Type designation: DK-8061RM; KB115
Brand: DK-8061RM; KB115
All versions of the Model DK-8061RM and KB115 are electrically equal and only differ in model
name because of marketing purpose.
Company Name: Dongguan Siliten Electronics CO.,LTD
Address: Sijia Yewu Industrial estate, Shijie Town
Telephone: +86-769-86338696Extension:8833
Fax No.: +86-769-86337646
E-mail: zr_zhou@siliten.com
Signature: ________________________
Name: Natural Zhou
Loading...