Page 1
USER MANUAL
（2.4G WIRELESS KEYBOARD）
Model Name : KB-8005
DK-3200RH User Manual
VER: 0.1
MODEL NO. : GK-120002/K
（DK-3200RH）
VERSION : 0.1
DATE : 2012.10.26
Page 1 of 8
Page 2
Version. # Revised Date PIC Remark
0.1 10/26/2012 Natural Preliminary
DK-3200RH User Manual
VER: 0.1
Page 2 of 8
Page 3
Electrical Specification
1. Operating Voltage
Keyboard supply voltage: 1.8V-3V (2 AAA batteries)
2. Current Consumption
Current use :< 5mA
DK-3200RH User Manual
VER: 0.1
3. Sleeping Mode
3.1 Timing to sleep mode: 10S (The time from all keys are free to the keyboard turn to
sleeping mode)
3.2 Current during the sleeping mode :< 0.05mA (finally stable the current)
3.3 Wake up: press any key of the keyboard
4. Low-voltage indicate
When the voltage below 2.2V, the LED light was flashing twice as the frequency of 10 Hz,
pause 1 second and then flashing twice again, which means the power is low. (No action
during sleeping model)
Wireless specifications
5
2.402-2.480GHz frequency coverage.
GFSK RF transceiver
High Speed RF link data rate Max. 1M bit/s
Page 3 of 8
Page 4
DK-3200RH User Manual
VER: 0.1
Key Function Chart
1. Standard part can be composited of 104/105/106/107/109
2. Added 3 function keys independently ,instruction as the figure shows：
Page 4 of 8
Page 5
Operation Process
Step 1
Open the battery cover which in the back of the keyboard.
Insert 2 AAA battery which is environment-friendly and safety
Close the battery cover.
Step 2
DK-3200RH User Manual
VER: 0.1
Place the keyboard on a desk or other plane surface. The surface material isn’t metal is
better for wireless distance.
Step 3
Insert a Transceiver in a USB port of PC. The Receiver is pairing with the keyboard.
Step 4
Use the keyboard freely.
Caution
Please use the keyboard in human house only and keep away
water.
Children use the keyboard with guardian together is necessary.
Page 5 of 8
Page 6
DK-3200RH User Manual
VER: 0.1
Keep dry. Humidity , liquids, contain minerals that will corr ode
electronic circuits.
Don’t use or store in dusty, dirty areas.
Don’t store in hot ar eas. High temperature can shorten the life of
electronic devices and warp or melt certain plastics.
Don’t store in very cold ar eas. Moisture can form inside the case,
which may damage electronic circuit boards.
Don’t attempt to open the case. Non-expert handling of the device
may damage the system.
Avoid dropping and strong impact.
Consumer grade, non-rechargeable carbon-zinc or alkaline
batteries are required for the product.
FCC Statement
This equipment has been tested and found to comply with the
Page 6 of 8
Page 7
DK-3200RH User Manual
VER: 0.1
limits for a Class B digital device, pursuant to part 15 of the FCC
rules. These limits ar e designed to pr ovide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interfer ence to radio or television
reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a cir cuit different from
that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for
help.
To assure continued compliance, any changes or modifications not
expressly appr oved by the party responsible for compliance
could void the user’s authority to operate this equipment.
(Example- use only shielded interface cables when connecting to
Page 7 of 8
Page 8
DK-3200RH User Manual
VER: 0.1
computer or peripheral devices).
This equipment complies with Part 15 of FCC RF Rules.
Operation is subject to the following two conditions:
1) This device may not cause interference and
2) This device must accept any interference, including interference
that may cause undesired operation of the device.
Caution!
The manufactur er is not responsible for any radio or TV
interference caused by unauthorized modifications to this
equipment. Such modifications could void the user authority to
operate the equipment.
Page 8 of 8
Loading...