Dongguan City Howin Decoration 2005070820088 User Manual

User Manual

1. Purpose

Howin’s self ballast lamp has implemented three phosphors together
into one compact fluorescent. It is a new type of light resource of
green environment. The product’s applications are practical for
supermarkets, shopping centers, retail stores, and gymnasium.

2. Characteristics

Howin’s self ballast lamp provides instant start, long-life and high
lumen output. The lamp is designed to perform up to the industry
standards by using less electricity. Lamp can operate under -18 °C
below zero degrees Celsius. From Howin’s testing results shows the
self ballast lamp only uses 20% of the electricity and it is compared
and equivalent to a regular incandescent bulb.

3. Directions

A, For Safety purposes, the lamp fixture must be powered off before
being installed, changed or being cleaned
B, this self ballast lamp cannot be operated with dimmer device. In
order to keep the lamp’s high performance it should be used in defined
voltage.
C,

This Lamp can be performed under environmental areas in

temperature from -18° C to 45° C, it cannot be used in enclosed
fixture or wet areas.
D,

Please check the power, voltage and contacts of the lamp incase the

lamp performs abnormal signs such as the light blinking or the light
turns off suddenly
E,

Do not hold the tube by the hands while changing or cleaning the

lamp.

4. Warnning：

Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate
the equipment.
This device complies with Part 18 of the FCC Rules.
This product may cause interference to radio equipment and should
not be installed near maritime safety communications equipment or
other critical navigation or communication equipment operating
between 0.45–30 MHz. If this occurs, please change outlet or move
the lamp far away from other appliance.

Dongguan City Howin Decoration Products Co., Ltd
Xiaohe Industrial Area, Daojiao Town,
Dongguan, Guangdong, China.

The proper way is to hold the lamp by the plastic housing.