Domo Tactical Communications SOL8SDRC477043, SOL8SDRC234091 Users Guide
August 2018
SOL8SDR-C
SOLO8 Software Defined Radio (Concealment)
Overview:
The SOLO8 Software Defined Radio is an ultra-miniature
COFDM digital video transceiver from Domo Tactical
Communications (DTC), designed specifically for Point of View
(PoV), body worn and concealment applications. Dependent
on the applications loaded, the platform can operate as a
Transmitter, Receiver, Dual Encoder, Standard IP Mesh and
MIMO IP Mesh. Further information on software capability can
found in the SDRAPP datasheets.
Three enclosure variants are available: Concealment (-C),
Robust (-R), Plain (-P).
Concealment (-C) is an ultra-miniature package ideal for
integration into the smallest concealment solutions.
The UHF version is larger than the standard SOL8SDR-C due to
the lower frequency of operation (320-470MHz). Please see the
SOL8SDR UHF Operation Guidelines publication for important
application notes.
One/two 2W PA accessories can be connected via D1806 for
extended range.
Features and Benefits:
Dual high profile HD H.264 independent video encoders (NEW)
2x100mW COFDM transceivers for use as COFDM Transmitter,
Receiver or IP Mesh
ISM band telemetry transceiver for control, PTZ and low power
standby
Dual SD/HD-SDI video inputs for recording, transmission and
analysis
Microphone inputs and headphone output for recording,
transmission or talkback
Growing USB support for peripherals such as 3G/4G/Wi-Fi
dongles
Ethernet, RS232 and RS485 connectivity and 128GB built in
storage
Compact packaging with ultra-miniature connectors
Very low power consumption: typically 7.5W
Exceptionally small size: 50mm x 50mm x 18mm (24mm UHF)
Weighs only 70-82g
Product information:
Product Includes
CA2856 Ethernet JST cable
CA3043 DC power JST lead
D918 Ethernet Magnetics PCB
D1804 Gecko breakout PCB
SA3774 SOL8SDR-C support USB stick
Accessory Options (sold separately)
CA3115 SMP (female) to SMA (female) cable 200mm
CA3116 SMP (female) to SMA (female) cable 100mm
D1806 Gecko active breakout PCB required for 2W PAs
AMP2W-032047-B-OEM 2W PA with bypass (320-470MHz)
AMP2W-120170-B-OEM 2W PA with bypass (1.20-1.70GHz)
AMP2W-165240-B-OEM 2W PA with bypass (1.65-2.40GHz)
AMP2W-198270-B-OEM 2W PA with bypass (1.98-2.70GHz)
AMP2W-440500-B-OEM 2W PA with bypass (4.40-5.00GHz)
SOL8SDR-C-CAKIT Cable accessory kits A, B and C available to aid
SOL8SDR-CK SOL8SDR Concealment kit
SOL8SDR-C-HSK Passive heatsink accessory for SOL8SDR-C
Related Documents
100210 SOL8SDR-C OEM Integration Document
100217 SOL8SDR Hardware Guide
integration. Refer to CAKIT guide.
The information contained in this document is the property of Domo Tactical Communications (DTC) Ltd.
Any copying or reproduction in any form whatsoever is prohibited without the written permission of DTC.
© 2018 Copyright Domo Tactical Communications (DTC) Limited. All rights reserved.
Domo – Video, IP and Sensors
August 2018
SOL8SDR-C
SOLO8 Software Defined Radio (Concealment)
Technical Specification:
IO
RF COFDM transceiver 1 SMP (male 50Ω)
RF COFDM transceiver 2 SMP (male 50Ω)
RF telemetry transceiver SMP (male 50Ω)
Video SD/HD-SDI 1 MCX (female 75Ω)
Video SD/HD-SDI 2 MCX (female 75Ω)
USB control and download USB 3.0 Micro-B
Power input Harwin Gecko or JST (4 pins)
Power output Harwin Gecko or JST (2 pins)
PA control Harwin Gecko or JST (4 pins)
Microphone/line input 1 Harwin Gecko or JST (3 pins)
Microphone/line input 2 Harwin Gecko or JST (3 pins)
Headphone output Harwin Gecko or JST (2 pins)
PTZ control or data IO Harwin Gecko or JST (7 pins)
Gigabit Ethernet Harwin Gecko or JST (10 pins + Magnetics)
COFDM Transceivers
Required application SDRAPP-TX* or SDRAPP-MESH*
Power 100mW (+20dBm) per output, 200mW total
Power step 0.25dB incremental control
Tuning range Frequency variant dependent
Tuning step 125kHz
Telemetry Transceiver
Required application SDRAPP-TX*
Power +11dBm frequency dependent
Tuning range Frequency variant dependent
Receiver sensitivity -114dBm
Receiver
Required application SDRAPP-RX*
Sensitivity Up to -110dBm
Streaming output Single service (first received)
Tuning range Frequency variant dependent
Tuning step 125kHz
Video
Required application SDRAPP-ENC*
Digital input Dual SD/HD-SDI (supports SOL8SDI for HDMI or
composite)
Audio
Required application SDRAPP-ENC* or SDRAPP-MESH*
Headphone output Mono headphone driver
Analogue input High gain microphone stereo pair
Digital input SD/HD-SDI de-embedding
Data
Data configuration 1k2 to 115k2, 7/8 bit, no/odd/even parity
Data interface RS232 or RS485 or USB peripherals
Storage
Medium Internal microSD 128GB
Control
USB PC application control and SD card mounting
Ethernet PC application control and file download
Access User, Super User and Admin accounts
Physical
Dimensions L 50mm, W 50mm, H 18mm
Weight 70g
Power
DC input 8V to 18V reverse polarity protected
DC output 1A pass-through (switchable)
Camera/adapter power 5V over video input (switchable)
Typical power consumption 7.5W (SD), 8.5W (HD), 9.5W (Dual), 4W
Environment
Temperature range -20°C to +60°C with additional cooling
Humidity Less than 85% non-condensing
Cooling External heat sink or fan required
Sealing IP40
EMC conformance None guaranteed, not CE marked
10V microphone bias (cable dependent)
(>8 hours recording at max DVB-T bitrate)
(>29 hours recording at max NB bitrate)
Web GUI control and file download
L 50mm, W 50mm, H 24mm (UHF)
82g (UHF)
(Receiver)
The information contained in this document is the property of Domo Tactical Communications (DTC) Ltd.
Any copying or reproduction in any form whatsoever is prohibited without the written permission of DTC.
© 2018 Copyright Domo Tactical Communications (DTC) Limited. All rights reserved.
Domo – Video, IP and Sensors
Loading...