Revision: 0.2
Resource ID 100289
D1707-OEM + AP001973 Integration
Document
Agile IP Mesh Radio
DTC – Solent
Fusion 2
1100 Parkway
Solent Business Park
Whiteley
Hampshire
PO15 7AB
United Kingdom
+44 (0)1489 566 750
D1707-OEM + AP001973
Integration Document
Agile IP Mesh Radio
Revision: 0.2
Page 1
Contents
Contents .............................................................................................. 1
1. Document History .................................................................................... 1
2. Introduction ............................................................................................. 2
3. FCC requirements..................................................................................... 3
4. Functional Specification ........................................................................... 4
RF Interfaces ....................................................................................................................... 4
IP interface ......................................................................................................................... 4
Encryption .......................................................................................................................... 4
Power ................................................................................................................................. 4
Environment ....................................................................................................................... 4
5. Power and Ethernet connection ............................................................... 5
6. Mechanical dimensions ............................................................................ 6
7. Antenna ................................................................................................... 7
D1707-OEM + AP001973
Integration Document
Agile IP Mesh Radio
Revision: 0.2
Page 1
1. Document History
Revision
Date
Author
Summary of Changes
0.1
07 Feb
2020
First draft
0.2
07 Feb
2020
D1707-OEM + AP001973
Integration Document
Agile IP Mesh Radio
Revision: 0.2
Page 2
2. Introduction
This document outlines the hardware integration for the D1707-OEM + AP001973 IP Mesh
baseband transceiver module with dual receive diversity.
This document applies to units with FCC ID:XRF-NETNODEP41W.
Several modules can be used to generate a fluid self-forming, self-healing mesh containing
up to sixteen nodes. The module within the mesh exchange data on a single frequency,
simplifying frequency management. The entire mesh system occupies just 6 MHz of
bandwidth. The modules employ a unique COFDM modulation scheme and therefore offer
excellent RF penetration and performance in the presence of multipath.
The highly flexible mesh topology means that data can be exchanged between nodes in a
point-to-point or multi-point fashion; range can be extended by using nodes as repeaters.
The self-forming, self-healing mesh architecture makes this module ideal for use in mobile
surveillance applications, command and control applications or advanced robotics.
Security of the entire mesh network can be ensured by the use of the optional AES128 or
AES256 encryption.
Equipped with Ethernet and serial control interfaces, the module is easy to integrate into a
larger system.
The key design criteria for this solution were low power consumption, small size, and ease of
integration.
D1707-OEM + AP001973
Integration Document
Agile IP Mesh Radio
Revision: 0.2
Page 3
3. FCC requirements
This module complies with part 90 of Title 47 of the Code of Federal Regulations. The host
manufacturer remains responsible for compliance with any other FCC rule parts that may
apply.
This module is sold on a Business to Business basis and customers requiring instruction on
how to put the module into test mode to aid with integration testing should contact their
Domo representative
Label Information to the End User by the OEM Integrators
If this certified module is installed inside the host device, then the outside of the host must
be labeled with “Contains FCC ID:XRF-NETNODEP41W”.
Information for the OEM Integrators
This device is intended for OEM integrators only. Please see the full grant of equipment
document for restrictions.
RF Exposure Statement
To satisfy FCC RF exposure requirements, a separation distance of 20 cm or more should be
maintained between the antenna of this device and persons during device operation.
To ensure compliance, operations at closer than this distance is not recommended
D1707-OEM + AP001973
Integration Document
Agile IP Mesh Radio
Revision: 0.2
Page 4
4. Functional Specification
RF Interfaces
Antenna 1 Switched transmit & receive antenna
Antenna 2 Receive only antenna
Output power 1W
Frequency Range 2354.0 to 2379.0 MHz
Bandwidth 6.0 MHz
Mesh capacity Up to 14.6Mbit/s
Modulation COFDM 360 carrier modulation
FEC rate FEC 1/2
Receive diversity Maximum ratio combining
Receive sensitivity -98dBm for most robust mode
IP interface
Primary & secondary
Ethernet electrical 100BaseT Ethernet
IP address allocation DHCP dynamic IP addressing
Video and audio streaming format Multicast VLC compatible UDP & RTSP support
Encryption
Type AES128 or AES256 (both optional)
Power
DC input 12 V nominal. 10.2 – 13.8 V absolute
Environment
Temperature rating -30°C to +50°C
D1707-OEM + AP001973
Integration Document
Agile IP Mesh Radio
Revision: 0.2
Page 5
5. Power and Ethernet connection
Power and Ethernet is connected via the 8-way socket
Power and Ethernet socket
Pin
Function
1
+12V
2
GND
3
Ethernet TX+
4
Ethernet TX-
5
Ethernet RX+
6
Ethernet RX-
7
GND
8
Shield
D1707-OEM + AP001973
Integration Document
Agile IP Mesh Radio
Revision: 0.2
Page 6
6. Mechanical dimensions
The module is:
• 186 mm wide
• 173 mm tall
• 23 mm deep
D1707-OEM + AP001973
Integration Document
Agile IP Mesh Radio
Revision: 0.2
Page 7
7. Antenna
This module is designed to be used with the following external antennas:
• Cobham OA4-2.2V/2046 omni antenna: 4 dBi gain
• DTC ANT2SMA-200250; Omnidirectional 2.0 – 2.5 GHz; 2.0dBi gain
Loading...