Dometic 3307906.036, 3307906.010 User Manual
USA
SERVICE OFFICE
Dometic Corporation
1120 North Main Street
Elkhart, IN 46514
CANADA
Dometic Corporation
46 Zatonski, Unit 3
Brantford, ON N3T 5L8
CANADA
3307906.010
3307906.036
SERVICE CENTER &
DEALER LOCATIONS
Please Visit
www.eDometic.com
WeatherPro Key FOB Kit
Programming Instructions
SERVICE INSTRUCTIONS
REVISION A
Form No. 3307996.029 3/17
©2017 Dometic Corporation
Lagrange, IN 46761
MODEL
3307906.010
3307906.036
3307906.010 & 3307906.036 Key FOB Kit Programming Instructions
SAFETY INSTRUCTIONS
This manual has safety information and instructions to help users eliminate or reduce the risk
of accidents and injuries.
RECOGNIZE SAFETY INFORMATION
This is the safety-alert symbol. When you see this
symbol in this manual, be alert to the potential
for personal injury.
Follow recommended precautions and safe operating instructions.
UNDERSTAND SIGNAL WORDS
GENERAL INSTRUCTIONS
Each replacement Key FOB must be programmed to match
the Electronic Control being operated. These instructions
will take you through the steps necessary to program the
Electronic Control.
3307906.010 WeatherPro Key FOB Kit contains:
1-3307906.028 Key FOB
1-3307996.029 Key FOB Programming Instructions
3307906.036 WeatherPro Key FOB Kit contains:
1-3309706.044 Key FOB
1-3307996.029 Key FOB Programming instructions
Important: These instructions cover several different
Electronic Controls. Identify which one you have and
follow the corresponding instructions. The Electronic
Control is usually located in a storage compartment.
3307906.010 Key FOB Kit is for the following Electronic
Control Kits.
3307843.007 Electronic Control Kit
3307844.005 Electronic Control Kit
3308014.004 Electronic Control Kit
Important: It is recommended that program-
ming procedure for Kit 3307906.010 be done by a
Service Center or a qualied service technician.
A signal word , WARNING OR CAUTION is used
with the safety-alert symbol. They give the level
of risk for potential injury.
Indicates a potentially hazard-
ous situation which, if not avoided, could result
in death or serious injury.
Indicates a potentially hazard-
ous situation which, if not avoided, may result in
minor or moderate injury.
When used without the safety
alert symbol indicates, a potentially hazardous
situation which, if not avoided, may result in
property damage.
Read and follow all safety information and instructions.
The electronic board is susceptible to static
charge. Do not insert metal object inside
control box. Damage to electronic board will
occur if a short is created. Use only a nonconductive material to depress programming
button inside Electronic Control.
3307906.036 Key FOB Kit is for the following Electronic
Control Kits:
3309424.004 Electronic Control Kit (OEM)
3309424.012 Electronic Control Kit (Aftermarket)
3309424.038 Electronic Control Kit (OEM 10 Pack)
3310287.002 Electronic Control Kit (OEM)
3310287.010 Electronic Control Kit (Aftermarket)
3310287.028 Electronic Control Kit (1 Pack - No Wind
Sensor)
3310287.036 Electronic Control Kit (10 Pack - No Wind
Sensor)
2
Loading...