INSTRUCTION MANUAL
DM-DV6217BT
6.2 inch DVD/VCD/CD/MP3/MP4/SD/USB PLAYER
FM/AM TUNER with Built-in BLUETOOTH
1
Safety Precautions
Do not change the fuse on the power
cord without professional guidance. Using
an improper fuse may cause damage to
this unit or even cause re.
Please contact your nearest dealer if one
of the following is experienced:
(a). Water or other objects enter the unit.
(b). There is smoke.
(c). Peculiar smell.
To ensure safe driving, please adjust the
volume to a safe and comfortable level in
case of emergency situations.
Thank you for purchasing this product.
Please read through these operating
instructions so you will know how to
operate your model properly. Please keep
this manual in a safe place for future
reference.
Only connect the unit to a 12-volt power
supply with negative grounding.
Never install this unit where operating it
may impair safe driving conditions.
Never use the front video display function
when driving, so as to prevent violating
trafc regulations or causing an accident.
Never expose this unit, amplifier, and
speakers to moisture or water to prevent
electric sparks or re.
2
Safety Precautions
1. Never disassemble or adjust the unit without professional guidance.
For details, please consult an authorised service provider or dealer.
2. If the front panel or TFT monitor is dirty, please use a clean silicone cloth and neutral detergent
to clean. Using a rough cloth and non-neutral detergent such as alcohol for clean may scratch
or discolour the monitor.
3. If the unit does not function normally, please refer to the troubleshooting guide of this manual.
If no relevant information is found, please press the [RESET] key on the front panel to resume
factory default.
4. If you have parked the car in hot or cold weather for a long time, please wait until the
temperature in the car becomes normal before operating the unit.
5. Using the car heater in a low temperature environment may result in moisture collecting inside
the unit, DO NOT use the unit in this condition. Eject the disc and wipe off the moisture on the
disc. If the unit does not work after a few hours, please contact the service center.
6. Do not drop or bang the LCD monitor as this will damage it.
7. To prevent damage to the screen, avoid touching it with sharp objects.
8. Graphic illustrations are used to provide a clear demonstration and an easy way to understand
how to operate this unit.
However, some illustrations are different from the actual images displayed on the screen.
9. Only operate the unit as described in this manual. Inappropriate operation will void the
guarantee.
Expanding Systems
Note:
The items listed outside of the frame are the commercial products generally sold.
3
Contents
Safety Precautions ...................................1
Before Using .............................................4
Front Panel .............................................4
Remote Control.......................................5
Basic Operations ......................................7
Parking Brake Inhibit...............................7
Mute ........................................................7
Power On / Off ........................................7
Audible Beep Conrmation .....................7
Playing Source Selection ........................7
Volume Adjustment.................................7
EQ Menu.................................................7
Select Preset Equalizer ..........................8
Adjust EQ Parameters ............................8
Adjust FAD BAL .....................................8
Set Date /Time ........................................9
Radio Mode .............................................10
Tuner Menu ..........................................10
Select Radio as Playing Source ...........10
Select One Radio Band ........................10
Tune......................................................10
Preset Station .......................................11
Local Seeking .......................................11
EQ Selection .........................................11
Playback Mode........................................12
Load a Disc ...........................................12
Eject a Disc ...........................................12
Touch Screen Controls .........................12
Controlling Playback .............................12
Connect an USB Device .......................12
Remove an USB Device .......................12
Insert a SD Card ...................................12
Remove a SD Card...............................12
Play/Pause............................................12
Previous/Next .......................................13
Search for a Folder ...............................13
Repeat ..................................................13
Repeat A-B ...........................................14
Shufe (Random) Play..........................14
Select Audio Mode................................14
Select Subtitle Language ......................14
Change Viewing Angle .........................14
Video Setup ..........................................15
Playback Information ............................15
Direct Track Entry .................................15
Rotate Pictures .....................................15
Zoom.....................................................15
Bluetooth Mode ......................................16
Pair the Bluetooth-enabled Devices .....16
Disconnect Bluetooth Device ................16
Make a Call ...........................................16
Receive a Call.......................................17
Adjust Bluetooth Settings......................17
Music Mode ..........................................17
Settings ...................................................18
Display System .....................................18
Adjust General Settings ........................18
Calibration.............................................18
Adjust Video Settings............................18
Adjust sound settings............................19
Adjust Time Settings .............................19
Adjust Language Settings .....................19
Adjust Bluetooth Settings......................19
Adjust DVD Rating ................................20
Adjust Volume Settings.........................20
Other Modes ............................................21
Listen to Other Devices ........................21
Reset ....................................................21
Replace a Fuse.....................................21
Steering Wheel Control Programming ..21
Specications .........................................22
Troubleshooting .....................................24
Installation ...............................................25
Wire Connections ...................................26
4
Front Panel
Before Using
1. [ ] Button
Press to eject a disc.
2. Remote Sensor
3. Disc slot
4. Reset Hole
Press to reset system settings to factory default (except password and parental lock
settings).
5. [VOL / / MUTE] Knob
Rotate to adjust the volume.
Press briey to activate the MUTE function. Press again to resume normal sound.
Press to turn the unit ON. Press and hold to turn the unit OFF.
6. [ ] Button
Adjust the brightness of screen.
7. [ ] Button
Press to switch between the available audio/video sources applied to the unit.
8. SD Interface Connector
Insert a SD card for playback of music/video les.
9. USB Connector
Connect a USB device for playback of music/video les.
10. A/V Input
Accept a 3.5mm jack through which signals from various audio/video devices can
be applied to the unit.
Notice:
The graphics in this manual are for reference purposes only and
may differ somewhat from the actual unit.
1 3
4
2
5
7
6
8
9
10
5
Before Using
Remote Control
1. Return to the home menu
2. Eject the disc
3. Access to tuner source
4. Access to disc source
5. - Search an available radio station by
decreasing tuning frequency
- Select the previous chapter/track for
playback
6. Select radio band
7. - Zoom in (Picture menu of CD/USB/SD)
- Access to music list (Audio menu of
music playing)
8. Adjust screen settings
9. Open EQ menu
10. Menu cursor
11. Enter
12. - Open route menu (DVD)
- Turns on/off PBC (VCD)
13. Digit area
14. Repeat playback
15. Change to next source
16. Power on/off
17. Access to Bluetooth source
18. There is no function in this model
19. Pause playback/Start playback
20. - Search an available radio station by
increasing tuning frequency
- Select the next chapter/track for
playback
21. - Playback disc in different angle for a
scene (DVD)
- Rotate (photo playing)
- Access to video list
22. - Language selection for subtitle (DVD)
- Access to photo list
23. Change the audio language for disc
playback (DVD)
24. Increase/Decrease volume
25. Access to settings source
26. Mute on/off audio output
27. Activate direct access mode
28. Dial/Receive a call
29. Hang up
30. Play all chapter/tracks in random order
31. - Press to clear the number one by one
- Hold to clear all the numbers
6
Notes on Remote Control Usage
1. Aim the remote control at the remote sensor on the unit.
2. Replace the battery from the remote control or insert a battery insulator if the battery has not
been used for a month or longer.
3. DO NOT store the remote control in direct sunlight or in a high temperature environment, as it
may not function properly.
4. The battery can last up to for 6 months in normal conditions. If the remote control does not
work, please change the battery.
5. Use“button shaped” lithium battery“CR2025”(3V) only.
6. DO NOT recharge, disassemble, heat or expose the battery to re.
7. Insert the battery in the proper direction according to the ( + ) and ( - ) poles.
8. Store the battery in a place where it cannot be reached by children to avoid the risk of accident.
Uninstall Battery
Slide out the battery compartment tray
at the bottom on the back of the remote
control.
Install Battery
Use button-shaped lithium battery
CR2025 (3V)” only. Insert the battery in
the battery tray in the proper direction
according to the (+) and (-) poles.
Before Using
PULL OUT PUSH IN
7
Parking Brake Inhibit
• When the “BRAKE” cable is connected to the brake switch, the video playback will be controlled
by driving status, system setup and input video sources.
• Parking brake function is overridden when the video source is set to REVERSE.
• When the car is moving ahead, if video is played, WARNING will appear on the screen and then
it will go blank. The warning screen will prevent the driver watching images. The passengers in
the rear seats can watch additional screen that connect to the unit normally.
Mute
Press [ VOL / / MUTE ] knob to mute the volume from the unit. Press again to restore the
volume. Adjusting the volume or using any of the audio setup features cancels the mute function.
Power On / Off
Press the [ VOL / / MUTE ] knob on the unit to turn the unit on. The buttons on the front of the
unit light up for a moment and the last working mode appears on the screen.
Press and hold the [ VOL / / MUTE ] knob to power off the unit.
Audible Beep Conrmation
An audible beep tone conrms each function selection. The Beep tone can be disabled through
the Setup menu.
Playing Source Selection
Press the [ ] button on the front panel to display the playing
source menu.
1. or : Touch to view the previous or next page of playing
sources.
2. Playing source icon: Touch to access corresponding work
mode.
3. Clock/Date
4. EQ: Touch to access Equalizer level settings menu.
Volume Adjustment
To increase or decrease the volume level, turn the [ VOL / /
MUTE ] knob on the front panel. The volume range is from “0” to
“50”. The screen displays the volume level for 3 seconds.
EQ Menu
The Audio Control feature allows you to easily adjust your audio
system to meet the acoustic characteristics of your vehicle, which
vary depending on the type of vehicle and its measurements.
Proper setting of the Fader and Balance boosts the effects of the
cabin equalizer.
1 1
2 3
4
Basic Operations
8
Select Preset Equalizer
1. Enter the EQ setup mode
Touch the [ ] icon in the user interface and the EQ setup
interface will display on the screen.
2. Select EQ mode
Touch the desired EQ selection: [ Optimal ] / [ Classic ] / [ Rock ]/
[ Jazz ] / [ Techno ] / [ Pop ], and the EQ mode will change.
Adjust EQ Parameters
To adjust EQ parameters, touch and drag the parameters
adjustment bar.
[ User ]: Set the desired audio effect.
[ Flat ]: Select the original audio effect.
[ Reset ]: Cancel the equalizer function settings.
[ Loud: On/Off ]: When listening to music at low volumes, this
featurewill selectively boost certain bass and
treble frequencies.
Adjust FAD BAL
You can adjust front/back/left/right balance of the speaker and the
subwoofer volume to get balanced listening effect according to the
surroundings and your interest.
1. Enter the EQ setup mode
Touch the [ ] icon in the EQ interface.
2. Adjust subwoofer volume
Touch [ ] / [ ] or drag [ ] under "Sub" to adjust subwoofer
volume from -12 to +12.
3. Adjust fader / balance value
Touch [ ] / [ ] / [ ] / [ ] to adjust fader / balance value
from -20 to +20.
[ ]: Front speaker
[ ]: Rear speaker
[ ]: Left speaker
[ ]: Right speaker
Notes:
1. The EQ mode will change to ‘User’ automatically when you adjust
the frequency value in all modes besides ‘User’.
2. The value of Sub is independent of EQ mode and can be
adjusted separately.
Basic Operations
9
Basic Operations
Set Date /Time
1. Touch [ ] on the playing source menu.
2. Touch [ Time ].
The date/time setup menu is displayed.
Set Date
1. Touch [ Date ].
2. Touch the date information on the screen.
A submenu is displayed.
3. Touch [ ] or [ ] to set year, month and day.
Set Clock Mode
1. Touch [Clock mode].
2. Touch [12Hr] or [24Hr] to switch to clock mode.
Set Time
1. Touch [ Time ].
2. Touch the time on the screen, a submenu is displayed.
3. Touch [ ] or [ ] to set hour and minute.
Tip:
When date/time is set, touch [ Save ] to conrm or [ Cancel ] to exit.
10
Select Radio as Playing Source
Touch [Radio] on the main source menu.
Select One Radio Band
Touch the [ ] icon on the user interface to select one radio band from FM1, FM2, FM3, AM1 and
AM2.
Tune
Auto Tuning
Press and hold [ ] / [ ] icon on the user interface for more than 1 second to seek a higher /
lower station.
To stop searching, repeat the operation above or press other keys having radio functions.
Note:
When a station is received, searching stops and the station is played.
Manual Tuning
Method 1:
During manual tuning, the frequency will be changed in steps.
Touch the [ ] / [ ] icon on the user interface to tune in a higher / lower station.
Method 2:
1. Touch the numeric keypad icon [ ]. Numeric keyboard is displayed, touch numbers to input
frequency.
2. Touch [ ] to delete the input numbers step by step.
3. Touch [ OK ] to enter.
Radio Mode
1
2
3
4
5
6 7 8 9
10
11
12
1. Touch to view the SOURCE MENU
2. Strong Local signal broadcasting indicator
3. Current radio band indicator
4. Preset stations list
5. Touch to view the second line of control bar
6. Tune backward (short press)
Seek backward (long press)
7. Search and store stations automatically
8. Tune forward (short press)
Seek forward (long press)
9. Touch to change band
10. Clock
11. Status indicator
12. The frequency of current station
13. Save/recall the desired radio station
14. Touch to receive Local or Distant stations
15. Enter frequency directly
16. Touch to access to Equalizer settings menu
Tuner Menu
14 15 1613
11
Radio Mode
Preset Station
The unit has 5 bands, such as FM1, FM2, FM3, AM1, AM2, and
each band can store 6 stations; hence the unit can store 30
stations in total.
Search Stations Automatically
Touch [ ] to search station and store the 6 strongest stations
in the current band automatically.
Manual Store
1. Tune to a station.
2. Touch [ ].
3. Touch one of the channels P1 to P6 to save the selected band.
Tune to a Preset Station
1. Touch [Radio].
2. Touch one of the preset channels (P1 to P6) on the screen.
Local Seeking
Touch the [ ] icon and choose Local or Distance.
When the [ ] icon turns bright, only stations with a strong
signal strength will be detected. Default is “Distance”.
EQ Selection
Press the [ ] icon and enter the EQ setup.
12
Load a Disc
You can play video, audio or images stored on the following discs:
• DVD Video, DVD-R, DVD-RW
• VCD
• Audio CD, CD-R, CD-RW
Note:
Ensure that the disc contains playable content.
Eject a Disc
Press the [ ] key on the front panel to eject the disc. When the
disc is ejected, the unit switches to the previous source.
Touch Screen Controls
The touch key areas for DVD playback are outlined below:
A: Return to the main menu
B: Play the video and display playback information
C: Display onscreen control menu
D: Time display
Controlling Playback
To access the on-screen controls, touch the screen anywhere
except for the upper left corner and touch again to cancel display.
Touch [ ] to view all function icons.
Connect an USB Device
1. Open the USB door.
2. Connect an USB device into the USB connector.
Play starts automatically.
Remove an USB Device
1. Select another source in the main menu.
2. Remove the USB device.
Insert a SD Card
1. Open SD card cover.
2. Insert the SD card into the SD card slot.
Play starts automatically.
Remove a SD Card
1. Select another source in the main menu.
2. Press the card until you hear a click sound.
3. Remove the SD card.
Play/Pause
1. Once a disc, USB or SD card is inserted, play starts
automatically.
Playback Mode
A B
C
D
13
For DVD movie, if a menu appears, press [ ] to start play.
2. To pause, touch [ ].
To resume play, touch [ ].
3. Skip to previous / next track / chapter, press [ ] / [ ] key.
Previous/Next
Touch [ ] / [ ] key on the screen to skip to previous / next
track / chapter.
Search for a Folder
For Audio Files
1. Touch [ ] to display all available audio folders.
2. Touch a folder, then touch the desired le.
3. Touch the le again to start play.
For Video Files
1. Touch [ ] to display all available video folders.
2. Touch a folder, then touch the desired le.
3. Touch the le again to start play.
For Picture Files
1. Touch [ ] to display all available picture folders
2. Touch a folder, then touch the desired le.
3. Touch the le again to start play.
For Folder Control
1. Touch [ ] to display all available folders
2. Touch a folder, then touch the desired le.
3. Touch the le again to start play.
Playback Mode
Repeat
For DVD/VCD movie disc:
1. Touch bottom half of the screen to display menu on the screen, if necessary.
2. Touch [ ] to display the 2nd menu.
3. Touch [ ] repeatedly to select:
DVD
[ ] Repeat chapter: Play the current chapter repeatedly.
[ ] Repeat title: Play all chapters in the title repeatedly.
[ ] Repeat all: Play all titles repeatedly.
[ ] Repeat off: Cancel repeat play.
VCD
[ 1 ] Repeat single: Play the current single repeatedly.
[ ] Repeat all: Play all chapters repeatedly.
[ ] Repeat off: Cancel repeat play.
14
For CD/MP3 les:
1. Touch anywhere except the upper left corner to display menu on the screen, if necessary.
2. Touch [ ] repeatedly:
[ 1 ] Repeat single: Play the current single track repeatedly.
[ ] Repeat all: Play all tracks in the disc or storage repeatedly.
[ ] Repeat off: Cancel repeat play.
Repeat A-B
You can repeat a specic of video le (repeat A-B).
1. Touch the screen to display control menu, if necessary.
2. Touch [ ] to display the 2nd menu, if necessary.
3. Touch [ A-B ] repeatedly to mark:
Repeat A-: the start of the section to repeat.
Repeat A-B: the end of the section to repeat.
The selected section plays repeatedly.
4. To exit A-B repeat mode, touch A-B repeatedly, [Repeat A-B off] is displayed.
Shufe (Random) Play
You can play audio tracks/les in random order.
1. Touch the screen to display control menu, if necessary.
2. Touch [ ] to display the 2nd menu, if necessary.
3. Touch [ ] on the screen repeatedly to turn random play on or off.
Select Audio Mode
When you play VCDs, you can select an audio mode (R/L/Stereo).
1. During play, touch bottom half of the screen to display menu on the screen, if necessary.
2. Touch [ ] to display the 2nd menu.
Touch [ ] repeatedly until the audio mode is selected.
Select Subtitle Language
For DVD discs that contain two or more subtitle languages.
1. During play, touch the screen to display menu on the screen, if necessary.
2. Touch [ ] to display the 2nd menu.
3. Touch [ ] repeatedly to select a language.
The selected language is displayed.
Change Viewing Angle
Some DVDs contain alternate scenes, such as scenes recorded from different camera angles.
For such DVDs, you can select from the available alternate scenes.
1. During play, touch the screen to display menu on the screen, if necessary.
2. Press [ Angle ] repeatedly on the remote control.
The viewing angle is changed.
Playback Mode
15
Video Setup
Touch [ ] to access video setup mode, touch [ ] or [ ]
to set the desired effect.
You may set the brightness, contrast, saturation and hue of the
video output from 1 to 20.
Playback Information
Touch the screen when playing back DVD and VCD discs and the
playback information will be displayed on the top area of the TFT.
For DVD
1. Disc type.
2. DVD Title information. “01/08” indicates that this DVD has 8
titles and the title playing back now is the first title.
3. DVD Chapter information. “005/012” indicates that current title
has 12 chapters and the chapter playing back now is the fifth
chapter.
For VCD
1. Disc type.
2. VCD Track information. “01/08” indicates that this VCD has 8
tracks and the track playing back now is the first title.
Elapsed Time
1. Elapsed time of the current track.
2. Total time of the current track.
Direct Track Entry
To select a track directly, touch the [ ] icon on screen control to
display the direct entry menu. Enter the desired track using the on-
screen number pad. Press [ OK ] to the selected track.
Rotate Pictures
1. When you view pictures, touch the screen to display menu on
the screen, if necessary.
2. Touch [ ] to display the 2nd menu.
3. Touch [
] repeatedly to rotate the picture.
Zoom
You can zoom in pictures for a close view.
1. When you view pictures, touch the screen to display menu on
the screen, if necessary.
2. Touch [ ] to display the 2nd menu.
3. Touch [ ] repeatedly to zoom in the picture.
Playback Mode
1
2 3
DVD T:01/08 C:005/012
1
2
VCD Track:01/08
1
2
00:01:20 00:30:17
16
You can make or receive phone calls with Bluetooth-enabled phones
through the unit. You can also listen to music from a Bluetoothenabled device.
Pair the Bluetooth-enabled Devices
To connect your Bluetooth device to the unit, you need to pair the
device to the unit. Pairing needs only to be done once. You can pair
up to five devices. You also can search for Bluetooth devices by
mobile phone.
1. Turn on the Bluetooth function on the device.
2. Touch [ ] to search for Bluetooth device with the unit.
3. Select
the Bluetooth device ID “DOMAIN” in the pairing list.
4. Enter default password “0000”.
Tip:
• The operational range between this unit and a Bluetooth device is
approximately 5 meters .
• Before you connect a Bluetooth device to this unit, familiarize
yourself with the Bluetooth capabilities of the device.
• Compatibility with all Bluetooth devices is not guaranteed.
• Any obstacle between this unit and a Bluetooth device can
reduce the operational range.
• Keep this unit away from any other electronic device that may
cause interference.
Disconnect Bluetooth Device
To disconnect one device, touch [ ] .
Tip
• The device will also be disconnected when the device is moved
beyond the operational range.
• If you want to reconnect the device to the unit, place it within the
operational range.
• Ifyoudonotwanttoreconnectthedevicetotheunitautomatically,
touch [ ],thenset[Autoconnect]to[Off].
Fordetails,seethe“AdjustBluetoothSettings”section.
Make a Call
1. Select Bluetooth function in the home menu.
2. Pair the phone with the unit.
3. Search for phone number from the following list:
[Phone Book]
[Call Log]
[Missed calls]
[Received calls]
[Dialed calls]
Or touch the number pad directly, then touch [ ] to dial.
Bluetooth Mode
17
Receive a Call
By default, all incoming calls are received automaticaly.
1. If there is an incoming call,
“Incoming”willappearonthescreen
.
2. You may touch the screen to select [ Hang up ] or [ Answer ].
Speak into the Bluetooth microphone.
Tip
• You can select to receive calls manually by setting [Auto answer]
to [Off] status.
Adjust Bluetooth Settings
1. In Bluetooth menu, touch [ ].
The option menu is displayed.
2. Touch on the selected option to change the setting.
∙ [Bluetooth]: To turn on or off “Bluetooth” function.
∙ [Auto connect]: To turn on or off “Auto connect” function.
∙ [Auto answer]: To turn on or off “Auto answer” function.
∙ [Pairing code]: To set paring code.
∙ [Phone book sync]: To synchronize phone book, touch [ OK ] on
the sub-menu popped out.
Phonebook sync may take several minutes to load on initial setup.
Tip
• You can also adjust Bluetooth settings in the “Settings” menu.
Music Mode
A2DP
A2DPisshort for AdvancedAudio DistributionProfile.The mobile
phonessupportingthisfunctioncantransmitstereoaudio,whereas
the ones not supporting this function can transmit mono audio only.
AVRCP
AVRCPisshortforAudio/VideoRemoteControlProfile.Themobile
phones supporting this function can control the playback of a
Bluetooth audio player.
To makeacall inmusic playingmode, press thenumber keyson
the mobile phone and the music player will stop. “Calling” will be
displayed on the TFT and once the call is received the caller audio
willbetransferred tothe unit. Whenthe callends,the screenwill
display the music playing menu.
Ifthereisanincomingphonecall,themusicplayerwillstopandthe
screenwilldisplay “Incoming”.When the callends, thescreen will
display the music playing menu.
Bluetooth Mode
18
Display System
1. Touch the upper left corner to display the main menu.
2. Touch [ Settings ].
The settings menu is displayed.
Adjust General Settings
1. Touch [ General ], if necessary.
2. Touch to highlight a setting.
3. Touch to display/select an option.
4. Touch blank area of the screen to exit.
General settings Options Description
Radio region
USA/China/Japan/Europe/Europe
(LW)
Select one that matches your location.
Radio range
Local
Select Local to receive only stations with extremely
strong signal.
Distance
Blackout Off/10s/20s Set the screensaver
Dimmer mode Night/Dark/Normal/Bright Adjust the display brightness.
Beep
On
Turn on the beep sound. Each time you press a button,
the unit beeps.
Off Turn off the beep sound.
Calibration Start Calibrate the touch screen.
Calibration
When the touch operation is not sensitive or valid, you should
calibrate the touch screen using the calibration setting function.
Adjust the response positions of the touch panel as followings:
1. Press the [ Calibration ] option on the setup menu to enter.
2. Touch [ Start ] to enter.
3. Press and hold the center of [ + ] for 2 seconds, the [ + ] will
move automatically.
4. Aim at center of [ + ], follow the path as shown in the gure.
Once steps 1-5 are complete the system will automatically exit
calibrating mode.
Adjust Video Settings
1. Touch [Video].
2. Touch an option repeatedly to select.
Video settings Options Description
Parking
On Disable video when driving.
Off Enable video when driving.
When in Park “On” mode, the screen will display WARNING information if you play the video. The
warning screen will prevent the driver from watching videos for safety.
Settings
19
Adjust sound settings
1. Touch [Sound].
2. Touch an option repeatedly to select.
3. Touch blank area of the screen to exit.
Sound settings Options Description
Subwoofer
On Turn on the subwoofer.
Off Turn off the subwoofer
Subwoofer lter
80Hz
Select subwoofer lter criteria.120Hz
160Hz
Adjust Time Settings
1. Touch [ Time ].
2. Touch an option repeatedly to select:
3. Touch blank area of the screen to exit.
Sound settings Options Description
Date Y/M/D
Touch [ ] or [ ] to set year, month and day.
Clock 12Hr/24Hr
Touch [12Hr] or [24Hr] to switch clock mode.
Time
H/S/AM/
PM
Touch [ ] or [ ] to set hour and minutes.
Touch [ ] or [ ] to set
AM/PM (only for 12Hr)
.
Adjust Language Settings
1. Touch [Language].
2. Touch an option repeatedly to select.
3. Touch blank area of the screen to exit.
Language settings Description
OSD Select on-screen display language.
DVD audio Select DVD audio language. Options available depending on DVD disc.
DVD subtitle Select DVD subtitle language. Options available depending on DVD disc.
Disc menu Select DVD menu language. Options available depending on DVD disc.
Adjust Bluetooth Settings
1. Touch [Bluetooth].
2. Touch an option repeatedly to select.
Bluetooth settings Options Description
Bluetooth
On Turn on the Bluetooth function.
Off Turn off the Bluetooth function.
Auto connect
On
If the pre-paired device is within the effective range, the unit re-connects
to pre-paired device automatically.
Off Need to re-connect manually.
Auto answer
On Answer paired phone call automatically.
Off Answer phone call manually.
Pairing code Set the password for pairing the unit with other Bluetooth devices.
Settings
20
Adjust DVD Rating
1. Touch [DVD rating].
2. Touch an option repeatedly to select.
3. Touch blank area of the screen to exit.
DVD rating Options Description
Set password Set password to restrict the play of discs. The default password is 4321.
Rating level
Kid safe Acceptable for children.
G Acceptable for general viewers.
PG Parental guidance suggested.
PG-13 Unsuitable for children under age 13.
PG-R Recommend parents to restrict viewing for children under 17.
R Restricted re-parental guidance is advised for children under the age of 17.
NC-17 Unsuitable for children under age 17.
Adult Acceptable for adults only.
DRC On/Off Dynamic range compression on or off.
Load factory Restore to default settings.
Adjust Volume Settings
You can set different volumes for different modes.
1. Touch [Volume].
The volume setting sub-menu is displayed.
2. Touch to select a source.
3. Touch [ ] or [ ] to assign value: 0 to 12.
When switching to the source, the volume increases automatically.
4. Touch blank area to close the sub-menu and touch top left of the screen to exit setting menu.
Settings
21
Listen to Other Devices
You can connect an external audio/video device to the unit.
1. Connect the external device with the supplied AV cable.
2. Touch the upper left corner to display the main menu.
3. Touch [AV-IN 1] / [AV-IN 2] to access external device.
Reset
When the unit hangs up, you can reset it.
Press [ RESET ] with a ball-point pen or similar tool.
Tip
When the unit has been reset, all the settings will return
to default settings.
Replace a Fuse
If there is no power, the fuse may be damaged and need to be
replaced.
1. Remove the unit from the dashboard.
2. Check all electrical connections.
3. Buy a fuse that matches the amperage of the damaged fuse.
4. Replace the fuse while the unit is powered off.
Steering Wheel Control Programming
1. Touch the upper left corner to display home menu.
2. Touch [ SWC ], the SWC menu will display.
3. Adjust each key with an individual function.
4. Touch [ Pair ] to program.
5. Press each individual steering wheel control button for each
corresponding function.
6. Once the nal steering wheel control button is programmed,
the functions are saved and the programming will end.
7. Touch [ Reset ] to reset the programming.
Other Modes
Reset
22
Specications
General
Power supply 12V DC (11V-16V)
Test voltage 14.4V,
negative ground
Maximum power output 50Wx4 channels
Continuous power output 25Wx4 channels (4
10% T.H.D.)
Suitable speaker impedance 4-8 ohm
Pre-Amp output voltage 2.0V (CD play mode:
1KHz, 0 dB, 10K
load)
Fuse 15A
Dimensions (WxHxD)
- Chassis 178x100x152mm
- Nose 178x101.5x165mm
Weight 2.2kg
Aux-in level 300mV
Disc Player
System Disc digital audio
system
Frequency response 20Hz - 20KHz
Signal/noise ratio >80dB
Total harmonic distortion Less than 0.20%
(1KHz)
Channel separation >60dB
Video signal output NTSC/PAL
Video output level 1±0.2V
Video signal input NTSC/PAL
FM Stereo Radio
Frequency range 87.5-108.0MHz
Usable sensitivity 8dBμ
Frequency response 30Hz-15KHz
Stereo separation 30dB (1KHz)
Image response ratio 50dB
IF response ratio 70dB
Signal/noise ratio >55dB
AM(MW) Radio
Frequency range 522-1620KHz
Usable sensitivity 30dBμ
6.2 Inch TFT LCD
Display resolution (dot) 800RGB (H) x 480(V)
Active area (mm) 137.52(H) x 77.232 (V)
Screen size (inch) 6.2 (Diagonal)
Dot pitch (mm) 0.1719(H) x 0.1609(V)
Brightness 400 cd/m2
Components
Machine screws M5x8 mm 4
Wire connector 2
Trim plate 1
Operating Instructions 1
Rubber cushion 1
Remote control 1
AV-in cable 1
Note: Specications and the design are
subject to change without notice due to
improvements in technology.
23
Supported Formats:
· USB or memory le format: FAT16,FAT32
· Mp3 bit rate(date rate): 32-320 Kbps and variable bit rate
· Directory nesting up to a maximum of 8 levels
· Number of albums/folders: maximum 99
· Number of tracks/titles: maximum 999
· ID3 tag v2.0 or later
· File name in Unicode UTF8(maximum length:128 bytes)
Unsupported Formates:
· Empty albums: an empty album is an album that does not contain MP3 les and is not shown in
the display.
· Unsupported le formats are skipped. For example, Word documents(.doc) or Mp3 les with
extension.dlf are ignored and not played.
· AAC, PCM audio les
Supported MP3 Disc Format:
· ISO9660, Joliet
· Maximum title number: 512(depending on le name length)
· Maximum album number: 255
· Supported sampling frequencies: 32kHz,44.1kHz,48kHz
· Supported bit-rates: 32-320Kbps and variable bit rates
Supported Video Formats:
· DVD
· MP4
Region Code
According to DVD sales regions, the whole world is divided into six regions. A DVD disc can be
played back only when its region code is compatible with that of the player in use.
Region 1: USA, Canada, East Pacic Ocean Islands;
Region 2: Japan, West Europe, North Europe, Egypt, South Africa, Middle East;
Region 3: Taiwan of China, Hong Kong of China, South Korea, Thailand, Indonesia, South East
Asia;
Region 4: Australia, New Zealand, Mid & south America, South Pacic Ocean Islands/Oceania;
Region 5: Russia, Mongolia, India, Middle Asia, East Europe, North Korea, North Africa, North
West Asia;
Region 6: China, Mainland.
Precautions when using Discs
1) DO NOT use irregular shaped discs.
2) Disc cleaning:
Use a dry, soft cloth to wipe the disc from center to edge, only neutral detergent can be used.
3) When playing a new disc:
New discs may have some rough spots around the inner and outer edges. If such a disc is
used, remove these rough spots with a pencil or ball-point pen, etc.
Specications
24
Troubleshooting
What appears to be a problem is not always serious. Please check the following points before
calling a service center.
Problem Cause Corrective action
General
Unit does not power on
Unit fuse blown. Install new fuse with correct rating.
Car battery fuse blown. Install new fuse with correct rating.
Illegal operation Reset the unit.
No/low audio output
Improper audio output connection. Check wiring and correct.
Volume set too low. Increase volume level.
Speakers damaged. Replace speakers.
Heavily biased volume balance. Adjust the channel balance to center position.
Speaker wiring is in contact with metal part of car. Insulate all speaker wiring connections.
Poor sound quality or
distortion
Pirated disc is in use. Use original disc.
Speaker power rating does not match unit. Replace speakers.
Wrong connections. Check wiring and correct.
Speaker is shorted. Check wiring and correct.
Tel-Mute malfunction MUTE wire is grounded. Check the ‘MUTE’ wiring and correct.
Unit resets itself when engine
is off
Incorrect connection between ACC and BATT. Check wiring and correct.
TFT monitor
Monitor does not open
automatically
TFT Auto Open is turned off. Turn TFT Auto Open on.
Warning information is shown
at all times
Parking break wiring is not correct. Check wiring and correct.
Flashing image or interference
appears on screen
The color system of DVD disc does not match the
monitor.
Adjust the color system of the DVD disc
playing back or the monitor in use.
Pirated disc is in use. Use original disc.
Video cable damaged. Replace cables.
Improper video signal connections. Check wiring and correct.
Disc playback
Cannot insert disc A disc is already inside the unit. Eject current disc and insert new one.
Disc does not play back
Disc is warped or scratched. Use disc in good condition.
Disc is dirty or wet. Clean disc with soft cloth.
Incompatible disc is used. Use compatible disc.
Disc is inserted upside down. Insert disc with label side up.
Disc region code is not compatible with unit. Use disc with proper region code.
PBC cannot be used during
VCD playback
PBC is not available on the disc. Use disc with PBC available.
Repeat or search function is
invalid during VCD playback
PBC is on. Turn PBC off.
Error messages
No disc
Disc is dirty. Clean disc with soft cloth.
Disc is upside down. Insert disc with label side up.
No disc inside. Insert disc.
Bad disc
Disc is dirty. Clean disc with soft cloth.
Disc is upside down. Insert disc with label side up.
Unknown disc Disc format is not compatible with this unit. Use disc with compatible format.
Region error
DVD region code is not compatible with
this unit.
Use disc with compatible region code.
25
Installation
Using the Cosmetic Trim Ring
One cosmetic trim rings are packaged with the head unit for installation exibility. This unit will t
into most import dashes with little or no modication to the dash board/cavity. Some US domestic
vehicle dashes will accept a Double-DIN chassis, but there is usually a small gap between the
radio and dash piece after installation is complete. In this case, use the appropriate trim ring to
conceal any gaps that may be present.
Note:
ForproperoperationoftheCD/DVDplayer,thechassismustbemountedwithin
30°
of horizontal.
Make sure the unit is mounted within this limitation.
26
Wire Connections
External Microphone
BRAKE
Green
Pink
Orange with White
White with Brown
Brown with Black
REVERSE
KEY A
KEY B
KEY GND
CLASS 1
LASER PRODUCT
P.N.: 127075006812
Loading...