DOLPHIN PROLITE Battery Charger 12 V / 15 A / 2 outputs / IP65 / fanless / Bluetooth, PROLITE Battery Charger 12 V / 25 A / 3 outputs / IP65 / fanless / Bluetooth Manual
Page 1
OPERATING & USERS MANUAL
MANUEL D’INSTALLATION ET D’UTILISATION
PROLITE Series Série PROLITE
Automatic IP65
Chargeurs IP65 de batteries
battery chargers
12V15A 12V25A
12.15
Battery charger
Waterproof IP65
Ignition-protected ISO 8846
2-bank
Battery selector
LEAD
GEL AGM
CALCIUM
LITHIUM
Press
3 sec for
selection
Charger mode
FLOAT
EQUAL
ABS
DEFAULT
230V 115V 115V / 230V
Code 399710 Code 399715 Code 399720 Code 399725
12.15
Battery charger
Waterproof IP65
Ignition-protected ISO 8846
2-bank
Battery selector
LEAD
GEL AGM
CALCIUM
LITHIUM
3 sec for
selection
Charger mode
FLOAT
EQUAL
ABS
DEFAULT
Press
ProLite
12.25
Battery charger
Fan-less
Waterproof IP65
Ignition-protected ISO 8846
3-bank
Battery selector
LEAD
GEL AGM
CALCIUM
LITHIUM
Press
3 sec for
selection
Charger mode
FLOAT
EQUAL
ABS
DEFAULT
ProLite
12.25
Battery charger
Fan-less
Waterproof IP65
Ignition-protected ISO 8846
3-bank
Battery selector
LEAD
GEL AGM
CALCIUM
LITHIUM
Press
3 sec for
selection
Charger mode
FLOAT
EQUAL
ABS
DEFAULT
(Nema 5-15) (Nema 5-15)
Page 2
EN
Summary
GENERAL SAFETY INSTRUCTIONS 2
SAFETY INSTRUCTIONS 2
Installation 2
Connections 3
Serial number 4
Choosing the charging curve 4
Maintenance 4
Safety battery instructions 4
Exposure to chemicals and gases hazard 5
PRODUCT OVERVIEW 5
LOCATION OF INSTALLATION 6
Installation 6
CONNECTIONS 7
Overview 7
AC Power wiring US version 8
AC Power wiring Standard version 8
DC Power wiring 8
Typical wiring with one battery 9
Typical wiring with two batteries 10
Typical wiring with three batteries 11
OPERATING INSTRUCTIONS 12
Dolphin Connect App 14
Selecting a charging profile from the app 15
Charger’s front display 17
TECHNICAL SPECIFICATIONS 18
DIMENSIONS 19
ProLite 12V15A - 230 V 19
ProLite 12V15A - 115 V - Nema 5-15 plug 20
ProLite 12V25A 21
ProLite 12V25A - Nema 5-15 plug 22
TROUBLESHOOTING 23
Replacing in-line DC fuse 23
Others issues 23
WARRANTY 23
Disposal 24
CE conformity 24
ISO 8846 Ignition Protected / SAE J1171:2016 certified 25
FCC conformity 25
1 NOT-PROLITE-03
Page 3
GENERAL SAFETY INSTRUCTIONS
This manual contains vital and essential information, in order to avoid electrical
shocks, overcharging or irreversible damage to the material. The owner should
read and understand this document before operating the charger.
This device is not intended for use by persons (including children) with physical,
sensory or mental disability, or by persons lacking experience or knowledge, unless
they have received from a person in charge of their safety adequate supervision or
preliminary instructions on how to use the device.
For any question, contact your dealer.
SAFETY INSTRUCTIONS
Those symbols indicate a danger, the dierent degrees of which are described
below.
ATTENTION
Indicates a danger which may result in damage to or destruction of the product.
PRECAUTION
Indicates a danger which may result in minor or moderate injury.
WARNING
EN
Indicates a danger which may result in death or serious injury.
DANGER
Indicates a danger which may result in immediate death or serious injury.
Installation
ATTENTION
• Do not expose the battery charger to rain, snow or bilge water.
• Do not operate the battery charger if it has received a sharp blow, been
dropped, has cracks or openings in the enclosure, or is otherwise damaged in
any other way.
• Do not install the charger near a heat source.
• It should not be installed in an airtight or badly ventilated area.
NOT-PROLITE-03 2
Page 4
EN
PRECAUTION
• Do not disassemble the battery charger. There are no user-serviceable parts with
the exception of a user-replaceable fuse at the DC ouput wiring compartment.
• Do not operate the battery charger with damaged or substandard wiring.
• In order to maintain watertightness, it is strictly forbidden to dismantle the
charger and/or to modify the casing and/or wirings in any way.
This charger is suitable for use in marine engine compartments, and near fuel
tanks.
Leave at least 10cm / 3inches clearance around the charger for proper
ventilation.
Install the charger in a vertical position to create an optimal ventilation. Note that
wirings are at the bottom of the charger.
All electrical connections to and from the charger must remain accessible all the
time.
The charger must be correctly and strongly fixed.
This device is not a toy and must be kept out of the reach of children.
Connections
ATTENTION
• To prevent overheating, ensure the correct tightening of the connections.
WARNING
• In order to protect the occupants, the main power supply access must be
attached to a dierential circuit breaker (refer with technical specifications).
• For safety reason, the green / yellow wire of the power cord must strictly be
connected to the earth of the installation.
• Each access connected to the battery is protected with a sealed fuse integrated
with the wire. Do not remove or change those fuses.
According to the model, the charger is set to be connected to a monophase
network 230V – 50/60 Hz or 115V - 50/60 Hz (refer with technical specifications).
The installation to which the charger is connected must comply with the
standards currently enforced in the country of use.
European Version: the cable N°1 of power cord must be connected to the LINE or
PHASE, the N°2 to the NEUTRAL.
US Version: The battery charger is supplied with an extension cord. Connect it at the
nearby 120 VAC GFCI (Ground Fault Circuit Interrupt) outlet.
3 NOT-PROLITE-03
Page 5
US Version: External connections to the battery charger shall comply with the
United States Coast Guard electrical regulations (33CFR183, Sub Part 1).
Output batteries must be connected to the charger before its power-on.
This device complies with enforced standards regarding emitted interferences
and disturbances of external origin.
Regarding electromagnetic interferences, ensure that other materials used are
compatible with this device in order to avoid irreversible damage.
Serial number
The S/N is available on the grey sticker on the top side of the charger.
Choosing the charging curve
WARNING
• It is important to choose the correct charging curve, appropriate with the
battery technology. An incorrect choice can cause irreversible damage. In
particular, risk of overheating and noxious gases in case of overvoltage to the
battery.
The LITHIUM cycle charge is only compatible with LiFePo4 batteries with
integrated BMS (Battery Management System).
Maintenance
If necessary, fuses on positive access must be replaced with identical products.
EN
This charger cannot be dismantled and thus, the electronic power board is
inaccessible. Except fuses, therefore, any maintenance on site is prohibited.
Safety battery instructions
DANGER
• Disconnect both AC and DC power from the battery charger before attempting
and maintenance or cleaning or working on any circuits connected to the battery
charger.
• When disconnected make sure battery terminals are fully insulated.
NOT-PROLITE-03 4
Page 6
EN
Exposure to chemicals and gases hazard
ATTENTION
• Make sure the area around the battery is well ventilated. Gas produced by
batteries can be explosive. Protect eyes when around batteries. Provide
adequate ventilation so hydrogen gas accumulation does not exceed 2% by
volume. Do not smoke, use open flame or create spark near batteries at any
time.
• Make sure the voltage of the batteries matches the output voltage of the battery
charger.
• Be carefull to keep corrosion from coming into contact with your eyes and skin
when cleaning battery terminals. Always remove metal objects from hands,
wrists & neck e.g. rings, bracelets, watches & necklaces.
• Always work with the battery ungrounded. Battery ground connections, if
required, should be made last.
PRODUCT OVERVIEW
6
1
AC Cord
1
Positive battery connection
2
Negative battery connection
3
Fuse
4
Battery connection terminal
5
LED
6
Setting push-button
7
12.15
Battery charger
Waterproof IP65
Ignition-protected ISO 8846
2-bank
Battery selector
LEAD
GEL AGM
CALCIUM
LITHIUM
selection
Charger mode
FLOAT
EQUAL
ABS
DEFAULT
ProLite
12.25
Battery charger
Fan-less
Waterproof IP65
Ignition-protected ISO 8846
3-bank
Press
3 sec for
7
6
2
2
3
4
1
Battery selector
Charger mode
LEAD
GEL AGM
CALCIUM
LITHIUM
Press
3 sec for
selection
FLOAT
EQUAL
ABS
DEFAULT
2
2 2
4
7
3
5
5
5 NOT-PROLITE-03
Page 7
LOCATION OF INSTALLATION
Never place charger above battery being charged. Gases from battery will
corrode and damage charger.
The unit is ignition protected: ProLite chargers can be installed in spaces
containing gasoline powered machinery, or gasoline fuel tank(s), or other
connection(s) between components of a gasoline system.
EN
Fuel
tank
+
-
12 V
Engine
Equipment protected against ignition of flammable gases
Possible areas for installing the Prolite charger
Prohibited area for installation of the Prolite charger
12.15
Battery charger
Waterproof IP65
Ignition-protected ISO 8846
2-bank
Battery selector
LEAD
GEL AGM
CALCIUM
LITHIUM
Press
3 sec for
selection
Charger mode
FLOAT
EQUAL
ABS
DEFAULT
Fuel
tank
Engine
+
-
12 V
Fuel
12.15
Battery charger
Waterproof IP65
Ignition-protected ISO 8846
2-bank
Battery selector
LEAD
GEL AGM
CALCIUM
LITHIUM
Press
3 sec for
selection
Charger mode
FLOAT
EQUAL
ABS
DEFAULT
tank
Installation
All ProLite chargers are designed to be permanently mounted on-board
and should be mounted with cables down. More details «TECHNICAL
SPECIFICATIONS», page 18.
NOT-PROLITE-03 6
Page 8
EN
CONNECTIONS
ProLite chargers are supplied with three (25Amp) or two (15Amp) positive DC
cables including ring battery terminals and waterproof fuseholder and one
negative DC cable including ring battery terminal. Each DC cable has a length
of 1,8 meter (6 feet) DC terminals are supplied with ring battery terminal 8,5mm
diameter for 8mm battery stud.
Overview
12.15
Battery charger
Waterproof IP65
Ignition-protected ISO 8846
2-bank
Battery selector
LEAD
GEL AGM
CALCIUM
LITHIUM
Press
3 sec for
selection
Charger mode
FLOAT
EQUAL
ABS
DEFAULT
ProLite
12.25
Battery charger
Fan-less
Waterproof IP65
Ignition-protected ISO 8846
3-bank
Battery selector
LEAD
GEL AGM
CALCIUM
LITHIUM
Press
3 sec for
selection
Charger mode
FLOAT
EQUAL
ABS
DEFAULT
7 NOT-PROLITE-03
Page 9
AC Power wiring US version
US Version: The battery charger is supplied with an extension cord. Connect it at
the nearby 120 VAC GFCI (Ground Fault Circuit Interrupt) outlet.
PhaseNeutral
Ground
AC Power wiring Standard version
ProLite chargers Standard version are supplied with a 1,8 meter 3 wire 0,75mm²
each stripped ends cable. AC cable must be wired to RCCB 30 mA CB. Ground
wire must be connected.
DC Power wiring
DANGER
• Disconnect AC power from your charger before any DC wiring
The following wiring diagram are for main AC to RCCB. DC wiring will be the
same for both standard and US models supplied with NEMA 15-5 plug.
EN
NOT-PROLITE-03 8
Page 10
EN
Typical wiring with one battery
When only one battery is connected other two DC positive cable terminals must
be isolated in waterproof boxes or either remove their in-line fuses.
12.15
Battery charger
Waterproof IP65
Ignition-protected ISO 8846
2-bank
Battery selector
LEAD
GEL AGM
CALCIUM
LITHIUM
Press
3 sec for
selection
Charger mode
FLOAT
EQUAL
ABS
DEFAULT
Earth terminal block
12 V
Earth terminal block
12 V
+
-
12 V
ProLite
12.25
Battery charger
Fan-less
Waterproof IP65
Ignition-protected ISO 8846
3-bank
Battery selector
LEAD
GEL AGM
CALCIUM
LITHIUM
Press
3 sec for
selection
Charger mode
FLOAT
EQUAL
ABS
DEFAULT
+
-
12 V
9 NOT-PROLITE-03
Page 11
Typical wiring with two batteries
When only two batteries are connected other third DC positive cable terminals
must be isolated in waterproof boxes or either remove their in-line fuses.
12.15
Battery charger
Waterproof IP65
Ignition-protected ISO 8846
2-bank
Battery selector
LEAD
GEL AGM
CALCIUM
LITHIUM
Press
3 sec for
selection
Charger mode
FLOAT
EQUAL
ABS
DEFAULT
Earth terminal block
EN
12 V
Earth terminal block
12 V
12 V
12 V
-
+
12 V
-+
ProLite
12.25
Battery charger
Fan-less
Waterproof IP65
Ignition-protected ISO 8846
3-bank
Battery selector
LEAD
GEL AGM
CALCIUM
LITHIUM
Press
3 sec for
selection
Charger mode
FLOAT
EQUAL
ABS
DEFAULT
12 V
+
- +
-
12 V
12 V
NOT-PROLITE-03 10
Page 12
EN
Typical wiring with three batteries
Three battery banks
ProLite
12.25
Battery charger
Fan-less
Waterproof IP65
Ignition-protected ISO 8846
3-bank
Battery selector
LEAD
GEL AGM
CALCIUM
LITHIUM
Press
3 sec for
selection
Charger mode
FLOAT
EQUAL
ABS
DEFAULT
Earth terminal block
12 V
- +
12 V 12 V
-
+
-+
12 V
12 V
12 V
11 NOT-PROLITE-03
Page 13
OPERATING INSTRUCTIONS
The ProLite charger is design to charge battery of the same type. Do not mix
battery type.
ATTENTION
It is important to select the correct charging profile for your battery. If you are
still unsure what kind of battery you have we recommend that you contact the
manufacturer of the battery.
Selecting a charging profile
EN
1. Power-on the charger connected to the batteries.
Note that during the power-on of the charger, the LED indicates for a few
seconds the current cycle charge (refer to below color vs cycle).
2. Wait a few seconds and verify that the charger is correctly charging the
batteries (NORMAL mode).
3. If necessary, press the push-button for 3 secondes: the charger enters the
SETTING mode, and the LED is blinking.
4. Press down the push-button the number of times equal to the selected
charging profile using the LED colour code.
Led Type de batterie
Green Open Lead
Yellow AGM - Gel
Red Lead Calcium
Green / red Lithium
5. After your choice, wait a few seconds, the charger returns automatically in
NORMAL mode.
NOT-PROLITE-03 12
Page 14
EN
yg
Battery selector
Charger mode
FLOAT
EQUAL
ABS
DEFAULT
LEAD
GEL AGM
CALCIUM
LITHIUM
Waterproof IP65
Ignition-protected ISO 8846
2-bank
Press
3 sec for
selection
yg
Battery selector
Charger mode
FLOAT
EQUAL
ABS
DEFAULT
LEAD
GEL AGM
CALCIUM
LITHIUM
Waterproof IP65
Ignition-protected ISO 8846
2-bank
Press
3 sec for
selection
yg
Battery selector
Charger mode
FLOAT
EQUAL
ABS
DEFAULT
LEAD
GEL AGM
CALCIUM
LITHIUM
Waterproof IP65
Ignition-protected ISO 8846
2-bank
Press
3 sec for
selection
yg
Battery selector
Charger mode
FLOAT
EQUAL
ABS
DEFAULT
LEAD
GEL AGM
CALCIUM
LITHIUM
Waterproof IP65
Ignition-protected ISO 8846
2-bank
Press
3 sec for
selection
yg
Battery selector
Charger mode
FLOAT
EQUAL
ABS
DEFAULT
LEAD
GEL AGM
CALCIUM
LITHIUM
Waterproof IP65
Ignition-protected ISO 8846
2-bank
Press
3 sec for
selection
ON
1
2 sec.
5 sec.
Open Lead
2
5 sec.
(green)
AGM - Gel
(yellow)
Lead Calcium
(red)
... ... ...
Lithium
(red/green blinking)
3
... ... ...
green
3 sec.
Press
3 sec for
4
selection
0,5 sec.
... ... ... ......
Press
3 sec for
selection
0,5 sec.
... ... ... ......
Press
3 sec for
selection
0,5 sec.
... ... ...... ...
Press
3 sec for
selection
0,5 sec.
... ... ... ......
greenred/greenredyellow
5 sec.
FLOAT (green)
... ... ...
EQUAL (yellow blinking)
5
ABS (yellow)
DEFAULT (red)
13 NOT-PROLITE-03
Page 15
EN
6. Preventively, verify the output charge voltage (Boost & Float phases).
Mode Open Lead AGM – Gel Lead Calcium Lithium
ABS mode 14,5V 14,5V 15V 14,5V
EQUAL mode ----
End of EQUAL mode ----
FLOAT mode 13,4V 13,6V 13,8V 14,5V
Example of load curve :
Dolphin Connect App
The smartphone App DolphinConnect
dashboard allows you to monitor in
real time your ProLite charger.
The network range can be up to
10 meters (30 feet) depending the
environment
In order to pair the ProLite charger
and your device (smartphone or tablet)
you need to enter the PIN number. PIN
number is available on product label.
Note: The product label is also available on the
packaging of the ProLite charger.
NOT-PROLITE-03 14
Page 16
EN
Selecting a charging profile from the app
After installing the app click on icon to
launch it.
Click on the home page to launch the
app.
Make sure Bluetooth is turned on.
Make sure ProLite charger is on.
Click on «detect my product».
Note: if Bluetooth is turned o the
following window will appear:
If ProLite charger is detected it will
appear in this window. Click on the
screen for validation.
15 NOT-PROLITE-03
Page 17
Enter the PIN number available on
product label.
The screen will display the state of
charger and actual charging stage.
EN
Left to right screen or click on menu
button
to navigate. In order to
change charging profile click on
«configuration».
NOT-PROLITE-03 16
Page 18
EN
It is important to select the correct
charging profile for your battery.
If you are still unsure what kind of
battery you have we recommend that
you contact the manufacturer of the
battery.
Charger’s front display
Mode LED Status
ABS mode Yellow Batteries are charging. Time required to complete “Absorption”
EQUAL mode Yellow blinking Batteries are coming to the end of the cycle charge. Time
End of EQUAL mode Green blinking Batteries are almost charged. Floating mode will begin in less
depends on the initial SOC of the batteries, but it is limited to
8hrs
required to complete “Equalization” depends on the initial SOC
of the batteries and varies between 30mn to 4hrs
than 30mn
FLOAT mode Green Batteries are completely charged
OT default
(Over Temperature)
RP default
(Reverse Polarity)
OVO default
(Output Over Voltage)
Red slow
blinking
Green / red
blinking
Red fast
blinking
Charger is stopped for a period of 30sec min. The restart is
automatic once the defect has disappeared.
Check the external ambient temperature.
Charger is stopped for a period of 30sec. The restart is
automatic once the defect has disappeared.
Check all connections and the polarity of the batteries.
Note that the internal battery fuse cannot be replaced.
Charger is stopped for a period of 30sec. The restart is
automatic once the defect has disappeared.
Check the output voltage. In general, this default is
irreversible.
17 NOT-PROLITE-03
Page 19
EN
TECHNICAL SPECIFICATIONS
12V/15A 12V/25A
Input
Voltage 115V or 230V (+/-10%) selon modèle 115/230V (+/-10%)
Frequency 50/60 hz (+/-10%)
Cos phi > 0,5 > 0,9
Eciency > 90%
Max Current 4A or 2A According to model 4A/2A
Output
Qty of output 23
Qty of cycles charge 4 (3 stages I.Uo.U)
Open Lead
Boost / Float
Voltage precision +/-2%
Max Power / Current 15A / 180W 25A / 300W
Ripple < 1% (BW < 20MHz)
Protections
Electronic
Internal fuses General protection (irreversible damage)
External +BAT fuses F20A F30A
General
Display Front tri-color LED
Control Front push-button or via “Dolphin Connect App”
Operating t° -10°C to +55°C (automatic derating)
Storage t° -20°C to +70°C
Humidity 10% to 90%
IP IP65
Ventilation Natural convection
Safety EN60335-1, EN60335-2-29, ISO8846, SAEJ1171, UL1236
EMC EN 55014-1, EN55014-2
Casing Anodized extruded aluminium
Mounting Wall-mounting 2 x M4 Screws
Dimensions
Weight 1,4 Kg / 3.1 lbs 1,7 Kg / 3.8 lbs
Wires length 1,8 m / 5,9 feet
AC access
DC access
AWG12 (399715 and 399710 models) or 14 (399725 and 399720 models)
AGM – Gel
Lead Calcium
Lithium
Output short circuit / Output over voltage
Output reverse polarity / Over temperature
142 x 72 x 194 mm
5.51 x 2.76 x 7.68’’
3 x 0,75mm²
With NEMA 15-5 plug for 399715 and 399725 models
with ring terminal diameter 8,5mm for 8mm battery stud
14,5V / 13,4V
14,5V / 13,6V
15,0V / 13,8V
14,5V
140 x 70 x 245 mm
5.51 x 2.76 x 9.65’’
NOT-PROLITE-03 18
Page 20
EN
DIMENSIONS
ProLite 12V15A - 230 V
0.02
-
+
0,5
-
+
194,1
7.64 in
70.87 in
1800 mm
4,5
Ø
0.18 in
Ø
12.15
Battery charger
Waterproof IP65
Ignition-protected ISO 8846
2-bank
+
0,2
-
+
0.008
-
142
5.59 in
Battery selector
LEAD
GEL AGM
CALCIUM
LITHIUM
Press
3 sec for
selection
Charger mode
FLOAT
EQUAL
ABS
DEFAULT
+
0,5
-
+
0.02
-
70.87 in
1800 mm
72
2.83 in
10,7
0.42 in
+
0,5
-
+
0.02
-
+
0,2
-
+
0.008
-
+
0,2
11
Ø
-
+
0.008
-
0.02
+
0,5
-
+
179
-
7.05 in
0.43 in
Ø
FLOAT
EQUAL
ABS
DEFAULT
19 NOT-PROLITE-03
Page 21
ProLite 12V15A - 115 V - Nema 5-15 plug
EN
0.02
-
+
0,5
-
+
194,1
7.64 in
70.87 in
1800 mm
4,5
Ø
0.18 in
Ø
12.15
Battery charger
Waterproof IP65
Ignition-protected ISO 8846
2-bank
+
0,2
-
+
0.008
-
142
5.59 in
Battery selector
LEAD
GEL AGM
CALCIUM
LITHIUM
Press
3 sec for
selection
Charger mode
FLOAT
EQUAL
ABS
DEFAULT
+
0,5
-
+
0.02
-
70.87 in
1800 mm
72
2.83 in
10,7
0.42 in
+
0,5
-
+
0.02
-
+
0,2
-
+
0.008
-
+
0,2
11
Ø
-
+
0.008
-
0.02
+
0,5
-
+
179
-
7.05 in
0.43 in
Ø
FLOAT
EQUAL
ABS
DEFAULT
NOT-PROLITE-03 20
Page 22
EN
ProLite 12V25A
0.02
-
+
0,5
-
+
9.61 in
244,1
70.87 in
1800 mm
142
5.59 in
ProLite
12.25
Battery charger
Fan-less
Waterproof IP65
Ignition-protected ISO 8846
3-bank
Battery selector
LEAD
GEL AGM
CALCIUM
LITHIUM
Press
3 sec for
selection
Charger mode
FLOAT
EQUAL
ABS
DEFAULT
+
0,5
-
+
0.02
-
70.87 in
1800 mm
72
2.83 in
+
0,5
-
+
0.02
-
+
0,2
4,5
Ø
0.18 in
Ø
0,5
-
+
229
0.02
-
+
9.02 in
+
0.008
-
-
+
0,2
11
Ø
-
+
0.43 in
Ø
0.008
-
+
10,7
-
0.42 in
0,2
+
0.008
-
21 NOT-PROLITE-03
Page 23
ProLite 12V25A - Nema 5-15 plug
EN
0.02
-
+
0,5
-
+
9.61 in
244,1
70.87 in
1800 mm
142
5.59 in
ProLite
12.25
Battery charger
Fan-less
Waterproof IP65
Ignition-protected ISO 8846
3-bank
Battery selector
LEAD
GEL AGM
CALCIUM
LITHIUM
Press
3 sec for
selection
Charger mode
FLOAT
EQUAL
ABS
DEFAULT
+
0,5
-
+
0.02
-
70.87 in
1800 mm
72
2.83 in
+
0,5
-
+
0.02
-
+
0,2
4,5
Ø
0.18 in
Ø
0,5
-
+
229
0.02
-
+
9.02 in
+
0.008
-
-
+
0,2
11
Ø
-
+
0.43 in
Ø
0.008
-
+
10,7
-
0.42 in
0,2
+
0.008
-
NOT-PROLITE-03 22
Page 24
EN
TROUBLESHOOTING
Replacing in-line DC fuse
ATTENTION
Before replacing a fuse it is important to check the origin of fault.
To replace DC fuses please follow the instructions:
• Disconnect AC Power from the electrical outlet.
• Disconnect DC negative cable.
• Disconnect AD positive cable to be replaced.
• Open the waterproof fuse holder.
• Check the fuse with the ohmmeter of a
multimeter.
• If fuse is blown replace it using the same
amperage.
• Closed the waterproof fuse holder.
• Connect DC positive cable.
• Connect DC negative cable.
• Connect AC power .
• Check the normal operation of the installation.
Others issues
Check Fault alarms status and contact reseller or factory if needed.
WARRANTY
In order to prevent all risks due to the incorrect use of the device, please read carefully
the list of possible situations or faults not covered by the warranty.
• Disassembly and/or modification of the casing resulting into the loss of the
watertightness and/or the damage of the charger.
• Disassembly and/or modification of the electronic power board resulting into
the malfunction or the damage of the charger.
• Mechanical shocks on the casing resulting into the loss of the watertightness
and/or the damage of the charger.
• Use of a non-appropriate main power supply (for example a generator with a
too high voltage) resulting into the malfunction or the damage of the charger.
• Over-voltage from the main or a lightning strike.
• Battery in reverse polarity but connected “in live” to a charger in operation,
resulting into a damage of the charger.
• Obvious connections errors resulting into the malfunction or the damage of
the charger.
23 NOT-PROLITE-03
Page 25
• Wires modified, fuses removed or replaced with non-appropriate products.
• Water to the interior of the device resulting the malfunction or the damage of
the charger.
• Cycle charge non appropriate with the technology of the battery, in particular
when the charge voltage is too high, risk of overheating and noxious gases.
• Use with LITHIUM batteries without integrated BMS.
Disposal
This device contains electronic and mechanical components that must be
recycled once the device is obsolete.
All electronic devices must be returned to a local distributor or to a
specialized company for an environmentally friendly disposal.
CE conformity
This product conforms to current European standards and has a CE
mark. Please contact us for the certificate of conformity.
EN
DECLARATION OF CONFORMITY CE
Manufacturer:
Address: 144 route des Vernes
74370 Pringy
France
I, undersigned Alain Pontille (CEO), declare that the products identified below:
399725- BATT. CHARG. DOLPHIN PROLITE 12V25A 399720- BATT. CHARG. DOLPHIN PROLITE 12V25A
399715- BATT. CHARG. DOLPHIN PROLITE 12V15A 399710- BATT. CHARG. DOLPHIN PROLITE 12V15A
Comply with the following directives:
REACH directive EC 1907/2006.
ROHS directive 2011/65/EU.
EMC directive 2014/30/EU.
Standards applied:
- EN/IEC 61000-6-1
- EN/IEC 61000-6-3
LVD directive 2014/35/EU.
Standards applied:
- EN/IEC 60335-1
- EN/IEC 60335-2-29
CATS POWER DESIGN
A. Pontille
NOT-PROLITE-03 24
Page 26
EN
ISO 8846 Ignition Protected / SAE J1171:2016 certified
515 Gus Hipp Blvd. Post Office Box 560933
Rockledge, Florida 32955 Rockledge, Florida 32956-0933
Telephone (321) 632-2008 FAX (321) 690-3360
www.imanna.com E-mail: info@imanna.com
th
, 2019
June 14
Cats Power Design
144, route des Vernes
74370 Pringy - France
To Whom It May Concern:
IMANNA Laboratory tested samples of the ProLite 12.25 and ProLite 12.15 battery chargers for ignition protection. These
tests were conducted in accordance with SAE J1171:2017 and ISO 8846:2016. The results of these tests are covered
under IMANNA Reports 21317-1 and 21359-1 for the ProLite 12.25 and ProLite 12.15, respectivel y. The results indicate
that both chargers comply with the requirements stated in SAE J1171:2017 and ISO 8846:2016 and are certified as
ignition protecte d.
Sincerely,
Robert L. White, Pres.
FCC conformity
Designed and tested comply to UL STD 1236
Designed and tested comply to CSA STD C22.2 No 107.2
Designed and built to ABYC A-31 standards
25 NOT-PROLITE-03
Page 27
Dolphin Charger
2, Chemin de Branchy
74600 ANNECY
France
contact@dolphin-charger.com
https://www.dolphin-charger.com
Photos are not contractual. © All rights reserved by Dolphin charger and Cats Power Design. Last update: 05/2023
Loading...