Dolgin Power Plate User Manual

Voltage Converter Power Plate

Owner’s Manual

Introduction

The Power Plate adapter is electrically compatible with all common 7.2V Li-Ion camera batteries. The
modular design allows for different battery models to be used when the appropriate adapter plate is fitted.
The Power Plate adapter is designed to power Panasonic Lumix GH2 cameras.

The PP adapter accepts Sony L/M (VX2xx or similar), Panasonic DVX100/HVX200/HPX170/HMC150,
and Canon BPxx (XL/GL) style batteries. The adapter must be configured with the appropriate plate to
match the battery style.

Operation

Mount a fully charged battery on the Power Plate adapter. The LED will illuminate. Connect the DC cable to
the DMW-DCC8 DC Coupler (not included).

Status LEDs

1. Green ON Battery is fully charged

2. LED blinking 3 times Battery is approximately at 3/4 charge level or less

3. LED blinking 2 times Battery is approximately at 1/2 charge level or less

3. LED blinking 1 times Battery is approximately at 1/4 charge level or less

4. LED strobs Battery is discharged

* To extend batteries service life avoid running them down to below 1/4 level

Specification

• Input Voltage 6.5V-8.4V

• Output Current up to 2A

• Efficiency ~90%

• Overload/short circuit protection set at 2.5A

• Smart LED charge level indicator

 Dolgin Engineering 1019 Massachusetts Ave. Lexington, MA 02420 • [phone] • www.dolgin.net

1