OUTPUTS AND CONTROL ELEMENTS HSD 310 / HSD 41562
l DVD-Player 62
Front panel 62
Back panel62
Remote Control63
QUICK START 64
h
l Remote control 64
s
i
l Battery advise 64
l
ng
CONNECTIONS65
E
l Connecting to a TV 65
l Connecting to an Audio-System 66
l Connecting to the 5.1 Audio-System (not available on HSD 310) 67
PLAYBACK68
l Remote control functions 68
l Buttons description 69
l Basic playback 70
FUNCTIONS71
l Special functions 71
l Karaoke (only model HSD 401 plus) 71
l Special DVD functions 71
Multimedia playback 72
l
l JPEG Picture Display 72
l Function setup 73
DISC INFORMATION 75
l Recommendations 75
NOTES ON SERVICE76
l Troubleshooting 76
l Specification 77
56
Page 3
FEATURES
l File formats compatibility list:
Video: MPEG1(SVCD, VCD)/MPEG2(DVD)/MPEG4
Audio: WMA/CD/MP3
JPEG Picture CD
Kodak Picture CD
l Media formats compatibility list:
CD-RW, DVD-R(W), DVD+R(W)
l Integrated surround-decoder (Dolby Digital/MPEG 5.1)
with 5.1 analog outputs (not on model HSD 310)
l High quality picture provided YUV connection with Progressive Scan ability
l PAL/NTSC/Multi
l Wide screen and Pan&Scan options
4:3 Pan & Scan / 4:3 Letterbox for standart TV set
16:9-widescreen
l Full DVD functionality
l Karaoke (only on model HSD 401plus)
l Wide range of connections:
Coaxial and optical digital outputs (optical output not on model HSD 310)
SCART
S-Video
VGA (not on model HSD 310)
Composite video
YUV
Dolby Digital/MPEG 5.1 decoded analog output (not on model HSD 310)
Analog stereo
NOTES:
„Dolby“ and Doppel-D-Symbol are the trademarks of Dolby Laboratories.
Made with licence of Dolby Laboratories.
The lightning flash with an arrowhead symbol within an
equilateral triangle is intended to alert the user to the
presence of uninsulated "dangerous voltage" within the
product's enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
WARNING: DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE,
DUE TO THE HIGH RISK OF FIRE OR ELECTRIC SHOCK, DO NOT OPEN
THE CABINET DANGEROUS HIGH VOLTAGES ARE PRESENT INSIDE
THE ENCLOSURE. ONLY QUALIFIED SERVICE PERSONNEL SHOULD
ATTEMPT THIS.
h
CAUTION: This Digital Video Disc Player employs a Laser System. To
s
i
prevent direct exposure to the laser beam, do not try to open the enclosure.
l
Visible laser radiation when open and interlocks defeated. Use of controls or
ng
adjustments or performance of procedures other than those specified herein
E
may result in hazardous radiation exposure.
DO NOT STARE INTO BEAM.
To ensure proper use of this product, please read this owner’s manual
carefully and retain for future reference. Should the unit require
maintenance, contact an authorized service location, or contact us. Only
qualified service personnel should remove the cover.
Basic safety requirements
Do not open the cabinet
Do not use the apparatus
near the water
Unplug the apparatus
during the lightning
storms or when unused
for a long period
58
Page 5
E
n
g
l s
i
h
59
Page 6
ACCESSORIES
Unit of equipment
Open the package of this DVD player, make sure the following accessories attached:
Audio and video cable
(combined Cinch cable)
h
s
i
l
ng
E
1,5 V batteries
60
Users’s manual
Remote control
Page 7
Front panel
OUTPUTS AND CONTROL ELEMENTS
HSD 401PLUS
HSD 401 PLUS
DVD/CD/MP3 PLAYER
MIC 21MIC VOLECHO
VOLUME AND HALL ADJUSTING KNOBS
MICROPHONE INPUTS
Rear panel
HSD 401 PLUS
OPEN/CLOSE I/P
INTERLACED / PROGRESSIVE
OPEN / CLOSE
PLAY / PAUSE
STOP
SEARCH
VIDEO OUT
STEREO AUDIO OUTPUT RIGHT
STEREO AUDIO OUTPUT LEFT
DIGITAL OUT, COAXIAL
AUDIO OUT FRONT RIGHT
SURROUND (5.1 MODE)
AUDIO RIGHT
AUDIO OUT SUBWOOFER
AV
VGA OUTPUT
DISPLAY
PLAY/PAUSE STOPPREVNEXT
(5.1 MODE)
(5.1 MODE)
POWERDISC TRAY
E
n
g
l s
i
h
VGA OUT
SCART
AUDIO OUT CENTER
SURROUND AUDIO OUT LEFT
AUDIO OUT LEFT
(5.1 MODE)
(5.1 MODE)
(5.1 MODE)
OPTICAL DIGITAL OUT
YUV OUT (PROGRESSIVE SCAN ENABLED)
S-VIDEO OUT
61
Page 8
Front panel
OUTPUTS AND CONTROL ELEMENTS
HDS 310 / HSD 415
h
s
i
l
ng
E
HSD 415
DVD/CD/MP3 PLAYER
Rear panel
HSD 415
DISC TRAY
INTERLACED / PROGRESSIVE
OPEN / CLOSE
PLAY / PAUSE
VIDEO OUT
STEREO AUDIO OUTPUT RIGHT
STEREO AUDIO OUTPUT LEFT
DIGITAL OUT, COAXIAL
AUDIO OUT FRONT RIGHT
SURROUND (5.1 MODE)
AUDIO OUT SUBWOOFER
AV
OPEN/CLOSE I/P
STOP
SEARCH
AUDIO RIGHT
VGA OUTPUT
DISPLAY
PLAY/PAUSE STOPPREVNEXT
(5.1 MODE)
(5.1 MODE)
POWER
VGA OUT
SCART
AUDIO OUT CENTER
SURROUND AUDIO OUT LEFT
AUDIO OUT LEFT
OPTICAL DIGITAL OUT
YUV OUT (PROGRESSIVE SCAN ENABLED)
S-VIDEO OUT
(5.1 MODE)
Note: 5.1 connectors not available in model HSD 310.
62
(5.1 MODE)
(5.1 MODE)
Page 9
OUTPUTS AND CONTROL ELEMENTS
OF THE DVD-PLAYER
Remote control
115
2
3
4
5
6
7
8
9
10
11
12
13
14
1. POWERStand by on/off
2. MUTE Sound off
3. NUMBER PADNumber buttons
4. TITLETitle menu
5. AUDIOAudiotrack select
6. MENUAccess to the menu of DVD
7. STOPStop the playback of disc
8. PLAY Start the playback of disc
16
9. PAUSE/STEPPause the playback of disc
17
10. A-BSelect and repeat segment
18
11. PROGProgramm
12. REPEATRepeat of the chapter /
19
20
21
13. ANGLECamera angle selection
22
14. SHUFFLERandom play
23
15. OPEN/CLOSEOpen/close the tray
from A poin to B
title / folder
16. SETUPDVD-player set up menu
17. PBCPlayback control (VCD)
24
25
18. NTSC/PALTV standart selection
26
19. SEARCHSearch on time
27
20. CLEARClear number pad input
21. PHOTO MODEPicture show mode
28
29
22. SUBTITLESubtitle select
or number of a track
for JPEG, Kodak picture CD
23. RETURNBack in the menu or to PBC
30
24. LEFT, RIGHTMoves the cursor to the
UP, DOWNselected item
31
25. ENTERChoose of selected item
26. DISPLAYOn-screnn display
27. SLOWSlow play
28. FAST FF/FRFast play
29. SKIPSkip the chapter
30. VOL +/-:Volume control
31. ZOOMTo zoom video and pictures
E
n
g
l s
i
h
63
Page 10
QUICK START
REMOTE CONTROL
Remote control
Insert the batteries in the remote control
1
Open the cover
2
Put the batteries
h
s
i
l
ng
Make sure to match - and +
3
Close the cover
E
NOTES:
l Direct the remote control at the infrared
reciever (IR) of the player
l Do not drop the remote control
l Do not spill water or put anything wet on it
l Do not disassemble the remote control
Operating instructions
Point the remote control at the IR
Within about 7 m with angle
about 30 grade in the both
direction
Remote control
NOTES:
Do not expose the IR of the dvd player to
a strong light source or direct sunlight.
NOTES ON BATTERIES:
Improper use may cause battery leakage and
corrosion. Please follow the instructions below:
l Do not insert the batteries in the wrong
direction
l Do not use different types of batteries together
l If you do not use the remote control for a long
time, remove the batteries
l If the remote control operates not correctly,
replace the batteries
l If battery leakage occurs, wipe the battery
liquid from the battery compartment, then
insert new batteries
l Make sure that the used batteries are disposed
properly according to you local regulations.
64
Page 11
CONNECTIONS
Connecting to a TV
YUV out
Use this signal source to get best picture
quality.
HSD 401 PLUS
STEREO OUT LEFT
STEREO OUT RIGHT
S-VIDEO OUT
VIDEO OUT
SCART
AV
VGA OUTPUT
VGA OUT (NOT ON MODEL HSD 310)
E
n
g
l s
i
h
NOTES:
l Turn off all devices before connecting.
l Select CVBS, S-Video, SCART, YUV or VGA output according to different TVs.
l Follow the sketch above to connect the devices with selected output.
l Refer to setup instructions on the page 18,19.
65
Page 12
CONNECTIONS
Connecting to an audio system
h
s
i
l
ng
E
NOTES:
HSD 401 PLUS
STEREO
OUTPUT
RIGHT
STEREO
OUTPUT
LEFT
AV
VGA OUTPUT
l Please refer to the manual of the reciver or amplyfier
l Turn off the power of all devices before connecting
l The player output has a wide dynamic range. Be sure to adjust the volume of reciever to a
moderate level. Otherwise, a sudden high volume may damage the speakers
l Turn off the audio system before you connect or disconnect power cord of the player
l Refer to the setup instructions of the player on the pages 19
66
Page 13
CONNECTIONS
Connecting to the amplifier with 5.1 channel sound output*
VIDEO
HSD 401 PLUS
FRONT (L)
SURROUND (L)
CENTER
SUBWOOFER
SURROUND (R)
FRONT R)(
SUBWOOFER
FRONT LEFTFRONT RIGHT
CENTER
AV
AV-RECIEVER
VGA OUTPUT
E
n
g
l s
i
h
SURROUND
LEFT
See notes on the page 12, see setup instructions on the page 19
* 5.1 connection not availabel on model HSD 310
SURROUND
RIGHT
67
Page 14
PLAYBACK
Remote control functions
h
s
i
l
ng
E
Direction buttons (áâßà) and
ENTER
Press the Direction buttons to move the
cursor to the selected item, then press
the ENTER
l CLEAR button
Press this button to clear the input digits
(displays on the screen) when
programming
l PLAY button
This button starts the playback of the
CD/DVD
l Number pad
When playing a VCD/SVCD disc, press
the number buttons directly to play your
favorite track in PBC off status. If the
track number is from 1 to 9, you can
directly press the number. If the track
number is more than 9, you should use
button 10+ and the other number buttons
together to select the track, for example:
for track 25, first, press the 10+ button
twice, then press button 5.
l STOP button
When playing a DVD disc, press this
button the first time during playback, the
DVD player memorizes the location
where you stopped (press PLAY to
resume playback from the
memorizedpoint). Press this button
again to stop the disc (then press PLAY
to start playing from the beginning of the
disc).
l RETURN button
For SVCD or VCD2.0 discs, in PBC
status, press this button to return to the
playback
l PAUSE/STEP button
Press this button for the first time to
pause, then each time you press the
PAUSE/STEP button, the picture
advances one frame. For CD, MPEG4 or
MP3, this button is only used for PAUSE
function.
l FAST (<< / >> ) buttons
Press the FAST button during playback,
the playback speed changes. Press
PLAY to resume the normal speed.
l SLOW button
For slow motion. Press this button
repeatedly to change the speed. Press
PLAY to resume the normal speed.
68
Page 15
PLAYBACK
Buttons description
l SKIP buttons
Press SKIP to select the next (previous)
chapter (for DVD)or track (for SVCD /
VCD / CD / MP3 / MPEG4).
uu||tt
() or ().
l ZOOM button
Press the ZOOM button during normal
playback to zoom a picture,press the
Direction buttons to shift the zoom point.
Press this button repeatedly to change
the magnification levels.
For JPG files, this button should be used
with the FAST buttons to fulfill the zoom
Function.
l A-B button
Press the A-B button at the beginning of
the segment (point A) you want to play
repeatedly, then press it again at the end
of the segment (point B), the selected
segment can be played Repeatedly.
Press it the third time to resume normal
playback. For MP3 and JPG files, the
button is invalid.
l REPEAT button
For DVD discs,press this button to repeat
the title or chapter. For VCD or SVCD
discs, press this button to repeat the
track.
l PROG button
For VCD or SVCD discs, press this
button, the program menu appears on
the screen, press the number buttons to
enter the chapter / track number you
want to program, the programmed tracks
can be up to 99 tracks. Press the PLAY to
start the programmed playback.Press
the CLEAR button to cancel the wrong
input digits. If you want to cancel
program, then press the PROG button
again.
l I/P button
I/P button is used for switching between
Progressive Scan and Interlaced display.
If the player is switched to Progressive
Scan by pressing I/P button, the DVD
player switches to YUV or VGA output
and to Progressive Scan mode. By
pressing I/P key in Progressive Scan
mode, the player deactivates
Progressive Scan playback and switches
to the output previously used.
You should use the I/P button only if the
DVD player is connected via YUV or VGA
to a device.
If the I/P button is pressed by accident
and you do not get a picture, press the I/P
key until you get a picture on your screen.
E
n
g
l s
i
h
l SEARCH button
Use to go to the needed position of the
disc.
.l DISPLAY button
Press this button to display the current
playback information on the screen.
69
Page 16
PLAYBACK
Basic playback
1. Press the POWER button on the front panel of the player
2. Press the OPEN/CLOSE button on the player or on the remote control
3. Put a compatible disc in the opened tray
4. Press OPEN/CLOSE button again.
ATTENTION: Do not push the tray with the hand. You may damage it!
5. Use playback control buttons on the player to SKIP or PAUSE. Or use the buttons of the remote
control to operate:
l SKIP
l SEARCH
l SLOW MOTION
l ZOOM
h
s
i
l
ng
E
See more about on the pages 17, 18, 19, 20.
NOTES:
l Do not move the DVD player during playback
l If you do not use the player for a long time unplug it
l For the PBC for VCD please refer to the following pages
70
Page 17
FUNCTIONS
Special functions
PBC-Playback
l
For VCD 2.0 or SVCD discs, press this
button to set the PBC functions.
In the PBC display of the SVCD /
VCD2.0, if the PLAY button is pressed,
the Player will enter PBC playback
status.If the PBC is turned off, the disc
will be played as VCD1.0/1.1.
When PBC is set to ON, the menu
appears on the screen, press the
number buttons to select and play the
track you want.
l VOLUME Control
You can change the volume level.
l MUTE
To turn off the sound, press this button.
One more time press the button to turn
on the sound.
Karaoke*
1. Connect the microphone to MIC jack.
Turn on the microphone.
2. Adjust volume with the know VOLUME
3. Select the track
When playing a Karaoke disc, press the
number buttons to select the track you
want to play, then you can start the
Karaoke
Special DVD-functions
l MENU button
Press this button to enter the DVD menu.
(If it is supported by the discs.)
l TITLE button
For DVD discs, press this button to enter
the title menu, then press the Direction
buttons and PLAY button to select and
play. (If it is supported by the discs.)
l AUDIO button
This button allows the user to select a
preferred audio language from those
included on the disc. This button also
support language selection for the SVCD
discs.
l ANGLE button
Press this button to change the camera
angle of the scene you are watching if the
scene was recorded from multiple
angles.
l SUBTITLE button
This button allows the user to select a
preferred language for the subtitle and
messages from those included on the
disc.
E
n
g
l s
i
h
* Karaoke only available on model
HSD 401plus
71
Page 18
FUNCTIONS
Multimedia playback (MP3 / MPEG4 / JPEG etc.)
h
s
i
l
ng
E
l Smart Navi: Playback menu
When a MP3 or MPEG4 disc is being played,
the playback menu will appear on the screen,
as shown in the following figure:
SMART NAVI
ROOT
CD 01
CD 02
CD 03
CD 04
CD 05
PLAY MODE FOLDER R
l Use the button to select the
previous / next track. Press the SKIP
buttons to turn the page up / down. Move
the cursor to the track you want to play,
then press the PLAY button to play the
track.
l You can use the Number buttons to select
and play the track directly.
l Use the / button to switch between
the selection of the playback mode and
playback menu. Move the cursor to the
playback mode, then press the
button to select the playback mode.
l If you choose to cancel the menu in the
SMART NAVI (navigation)item in the
setup menu,the playback menu will not be
displayed on the screen, and the Player
will playback the tracks sequentially.
á / â
ßà
ROOT 0
MP3
TRACK 104 1
MP3
TRACK 105 2
TRACK 106 3
MP3
TRACK 107 4
MP3
TRACK 108 5
MP3
JPEG Picture Display
The playback menu of the JPEG picture
is similar to MP3 / MPEG4 playback
menu. Please refer to MP3 / MPEG4
Playback.
l When playing the JPG pictures,
press the direction buttons to rotate the
picture.
á / â
WHAT IS MPEG4?
MPEG-4 is an ISO/IEC standard developed by
MPEG (Moving Picture Experts Group), the
committee that also developed the Emmy
Award winning standards known as MPEG-1
and MPEG-2 (DVD adopts this standard for
video application).
MPEG-4 is a very efficient digital video
compression standard, which can compress
MPEG-2 video into about one eighth of its
original size. Most video stream medias base
on this technology, such as DivX, WMV, and so
on. So MPEG-4 is the most popular digital
video technology in the video distribution and
communication.
HOW TO PLAYBACK YOUR MPEG4 CD?
1. Press OPEN/CLOSE. Place the CD on the
disc tray, and press it again to close the tray.
2. Select a folder or an AV file contained on the
CD. Use the direction keys to navigate
among the items.
3. Press PLAY. The player will start the
playback.
HOW TO CREATE YOUR MPEG-4 DISC?
1. Download the files from Internet or rip from
the other video source using the PC/MAC
application, and save the MPEG-4 files as
many formats, like *.avi, *.asf etc.
2. Place the blank CD-R/-RW disc into PC CDR/-RW driver or other record devices.
3. Burn your favorite MPEG-4 files into your
CD-R/-RW using the CD burn application,
like the Nero Burning , Clone CD, etc.
4. Finalize your disc and eject the CD.
DIVX SUBTITLES
Your Xoro DVD player can display DivX
subtitles. It supports .sub, .srt and .smi.
Before you start playback, the subtitle file must
be activated. As soon as the player ha read the
CD index, a menu shows the movie and the
subtitle files. The subtitle file is displayed with a
question mark, this is normal. Navigate with the
arrow keys to the desired subtitle file and press
SUBTITLE key on the remote control. The
player propmts “DivX subtitle selected”. Now,
you can start the movie and the subtitles will be
displayed. You can deactivate the subtitle
display simply by pressing SUBTITLE key on
the remote control.
Note:
Subtitles are not supported in all languages. At
the time this manual has been printed, English,
german and polish subtitles are supported. It
may be possible that other languages are
supported, too due to an improved firmware.
Also, other subtitle formats may be supported
by newer firmware.
Please note that some programs create
subtitles which are not compatible with this
player. This is normal and is no defect of the
player.
72
Page 19
FUNCTIONS
Function Setup
Press the SETUP button, the following figure
will appear on the screen:
SETUP MENU -- MAIN PAGE
GENERAL SETUP
SPEAKER SETUP
AUDIO SETUP
PREFERENCES
EXIT SETUP
Note: Model HSD 401plus
has additional entry “KARAOKE”
1. Press the SETUP menu to enter the setup
menu.
2. Use the button to choose the menu item
3. Use the button to move the high light icon
4. Use the button to change the current
5. Use the button to return to the left side
6. Press the SETUP button to quit the setup
GENERAL PAGE
áâ
you want to change, then press ENTER to
confirm it.
à
to the right side item.
áâ
setup, then press the ENTER button to
confirm it.
ß
item.
menu.
-- GENERAL PAGE --
ANGLE MARK
OSD LANG
CAPTIONS
SCREEN SAVER
MAIN PAGE
ON
OFF
Lagerung von Cds
SPEAKER SETUP PAGE
--SPEAKER SETUP PAGE--
DOWNMIX
CENTER
REAR
SUBWOOFER
CNTR DELAY
REAR DELAY
TEST TONE
MAIN PAGE
l
DOWNMIX
LT/RT, STEREO, OFF
l
CENTER
ON, OFF
l
REAR
ON, OFF
l
SUBWOOFER
ON, OFF
l
CNTR DELAY
The delaying time can be setup as:
0, 1, 2, 3, 4 and 5 MS (miliseconds).
l
REAR DELAY
The delaying time can be setup as:
0, 3, 6, 9, 12 and 15 MS (miliseconds).
AUDIO SETUP PAGE
SPDIF OUTPUT
DUAL MONO
COMPRESSION
PRO LOGIC
LPCM OUTPUT
MAIN PAGE
AUDIO RELATED
--AUDIO PAGE--
Note:
Model HSD 310
only offers
“DOWNMIX”
LT/RT
STEREO
OFF
OFF
SPDIF/RAW
SPDIF/PCM
E
n
g
l s
i
h
l ANGLE MARK:
ON, OFF
l OSD LANG (language)
Select your preferred language for OSD
display and messages
! CAPTIONS
ON, OFF
l SCREEN SAVER
ON, OFF
l SPDIF OUT
OFF, SPDIF/RAW/SPDIF/PCM
! DUAL MONO
STEREO,L-MONO, R-MONO, MIX-MONO
! COMPRESSION
OFF, 1/8, 2/8, 3/8, 4/8, 5/8, 6/8, 7/8, FULL
l PRO LOGIC
OFF, ON, AUTO
l LPCM OUTPUT
LPCM 48K, LPCM 96K
73
Page 20
FUNCTIONS
Function Setup
h
s
i
l
ng
E
PREFERENCES PAGE
--PREFERENCES PAGE--
TV Display
TV Type
VIDEO OUTPUT
AUDIO
SUBTITLE
DISC MENU
PARENTAL
PASSWORD
DEFAULTS
SMART NAVI
MAIN PAGE
The preferences setup should be done in
completely stop status.
! TV DISPLAY
NORMAL/PS
l TV TYPE
MULTI.SYTEM, NTSC, PAL
l VIDEO OUTPUT
S-VIDEO, RGB, VGA (not HSD 310),
YCBCR,YPBPR
l AUDIO (audio language)
Here you can select the language of the
audio stream (if supported by the disc)
l SUBTITLE Language
Here you can select the language of the
subtitles (if supported by the disc)
If you want to change the setup of the item,
you should enter the password. About the
password, please refer to PASSWORD.
The default password is 3308
! DEFAULTS:
Here you can restore the factory default
settings
! SMART NAVI
Here you can select if the smartnavi is
displayed with or without menu in
filemode.
MULTI SYSTEM
NTSC
PAL
PASSWORD
--PASSWORD CHANGE PAGE--
OLD PASSWORD
NEW PASSWORD
CONFIRM PWD
When you select to change the password,
PASSWORD CHANGE PAGE appears on the
screen.
The first line is OLD PASSWORD.
The second line is NEW PASSWORD.
The third line is CONFIRM PWD (password).
When the new password is entered for two
times, it means you have successively
changed the password.
The factory code (password) is 3308.
74
Page 21
DISC INFORMATION
Handling precautions
l Do not touch the playback side
of the disc.
Aufnahmeseite
l Do not attach paper or tape
to discs.
To clean discs
Просмотр JPEG картинок
l Fingerprints and dust on the disc may cause picture
and sound deterioration. Wipe the disc from the center
outwards with a soft cloth. Always keep the disc clean.
l If you cannot wipe off the dust with a soft cloth, wipe
the disc lightly with a slightly moistened soft cloth and
finish with a dry cloth.
l Do not use any type of solvent such as thinner,
benzine, commercially available cleaners or antistatic
spray for vinyl Lps. It may damage the disc.
On storing discs
l Do not store discs in a place subject to direct sunlight
or near heat sources.
l Do not store discs in places subject to moisture and
dust such as a bathroom or near a humidifier. Store discs
vertically in a case. Stacking discs or placing objects on
their case may warp the discs.
Copyright notes
l It is forbidden by law to copy, broadcast, show on
cable, play in public, and rent copyrighted material
without permission.
l DVD video discs are copy protected, and any
recordings made from these discs will be distorted.
About this manual
l This user's manual explains the basic instruction of
this DVD player. Some DVD video discs are produced in
a manner that allows specific or limited operation during
playback. As such, the DVD player may not respond to
all operating commands.
E
n
g
l s
i
h
Discs that can be played
Disc mark
MP3
Contents
Audio + VideoDVD12 cm
Audio + VideoSVCD
Audio + VideoVideo CD
AudioAudio CD
Audio
CD-Size
12 cm
12 cm
12 cm
12 cm
Maximum playback time
Approximately 2 hours (single sided single)
Approximately 4 hours (single sided double)
Approximately 4 hours (double sided single)
Approximately 4 hours (double sided double)
Approximately 45 minutes
Approximately 74 minutes
Approximately 74 minutes
75
Page 22
NOTES ON SERVICE
Check the following guide for the possible cause of a problem before contacting service.
Technical Support of Xoro/MAS: Tel.: 040/77 11 09 17, Internet: www.xoro.de/support.htm
Symptoms
No power
No picture
No sound
The playback picture
has occasional
h
s
i
l
Brightness is
ng
unstable or noises
E
are produced on
playback pictures
The DVD player
does not start
playback
Buttons do not work
The remote control
does not work
properly
Cause
The power plug is disconnected
The TV is not set to receive DVD
signal output
The video cable is not connected securely
The DVD video mode is not matched
with the TV
The audio cable is not connected securely
The power of the equipment connected with
the audio cable is turned off
The setting of output sound type is not correct.
The disc is dirty.
It is in fast forward or fast reverse playback.
The copy protection’s effect.
No disc is inserted.
An unplayback disc is inserted.
The disc is placed upside down.
The disc is not placed within the guide.
A menu is on the TV screen.
The parental lock function is set.
Power supply fluctuations or other
abnormalities such as static
electricity may interrupt correct
The remote control is not pointed at
the remote sensor of the DVD player
The remote control is too far from
the DVD player
The batteries in the remote control
are exhausted
Correction
Connect the power plug into the wall outlet
Select the appropriate video input mode on
the TV so the picture from the DVD player
appears on the TV screen
Connect the video cable into the jacks
securely
Refer to Connecting to a TV (page 10)
Connect the audio cable into the jacks
Turn on the equipment connected with the
audio cable
Set the audio setting correctly.
Eject the discs and clean it.
Sometimes a small amount of picture
distortion may appear. This is not
malfunction.
Connect the DVD player to the TV directly.
Insert a disc.
Check the disc type and color system.
Place the disc with the playback side down.
Place the disc on the disc tray correctly
inside the guide.
Clean the disc.
Press the SETUP button to turn off the menu
screen. Cancel the parental lock function or
change the parental.
Turn the power on or off with the POWER
button. Or disconnect the power plug and
insert it into the wall outlet again.
Point the remote control at the remote
sensor of the DVD player
Operate the remote control within
about 7 m
Replace the batteries with new ones
76
Page 23
DVD-Player
SPECIFICATIONS
Power supply
Power consumption
Weight
External dimensions
Signal system
Laser
Frequency range
Signal-to noise ratio
Audio dynamic range
Operating conditions
Outputs
Composite Video output
Audio output (analog audio)
95-240V AC,50/60Hz
20 W
4 +0.5kg
430 x 50 x 320mm (W/H/D )
PAL /NTSC
Semiconductor laser, wavelength 650 nm,780nm
+3dB (20Hz - 20kHz)
>90 dB
>80 dB
Temperature0 - 40 C
Operation statusHorizontal
1.0 +0,2Vp-p, 75Om
2.0 +0.2V (rms)
0
E
n
g
l s
i
h
Supplied Accessories
Audio/Video cable (3wire) 1
Remote control1
Batteries2
User manual1
l Designs and specifications are subject to change without notice.