Bluetoothkeyboardle a the r sheath
Product using instruction
Dear customers,
Thank you for choosing our company’s product! In order to
make full use the function of this product and good
operation in the feature, please read the following
specification carefully.
Steps:
1.Open the leather sheath（graphica-b）
2. Put the tablet into the protection enclosure (graphic c-d)
3. To support the tablet by absorption of magnetic iron of
leather sheath and protection enclosure (graphic e-f)
4. Take the tablet out of the protection enclosure (graphic
g-h)
Function introduction part (graphic b)
A. Protection enclosure
B. LED light
1
Bluetooth indication light ○2 Power supply/charging
○
3
indication light ○
C. Charging connection
Capitals lock on indication light
Charging by Mirco USB line, one end connect tablet and
one end connect keyboard. While charging the power
supply indication light is red, after charging finished the
light is off. It will take 1-1.5 hours for charging.
D. Power supply switch
Model of keyboard: B10T
Connection method: Bluetooth 3.0
Battery capacity: 230mAh
Working time: 20-30 hours
Size: 261.4x 176.8x 19.5mm
Weight: about 432g
Shortcut key specification:
F1: sleeping F2: Setting F3: Brightness – F4:
Brightness + F5: Volume – F6: Volume + F7: Mute
F8: Switch screen F9: Touch panel switch
Keyboard coding specification:
1.When the switch is in on position, turn on the power
supply of Bluetooth keyboard (power supply indication light
is on with Bluetooth coding light together)
2. Press FN+C on the keyboar d (Bluetooth indication light
flashing, the keyboard is in coding statue). Turn on the
Bluetooth switch of host to search Bluetooth keyboard
(matching name of keyboard is Bluetooth keyboard),
then click the matching name and host will show a
random password, please input the password and press
enter to connect with host.
3. While the keyboard is connected with the host, power
supply light is on and Bluetooth indication light is off.
4. If you do not use Bluetooth keyboard, please turn off the
switch.
5. Next time, you only need turn on the keyboard power
supply; it will connect with host again.
Caution:
1.When the power is not enough, power supply indication
light will flashing, please charging at only.
2. Charging time is 1-1.5 hours, it is not suggest to charge
more than 3 hours.
3. The keyboard will come into sleeping statue if it is free
for more than 5 minutes, press any key can wake up it.
Warranty and three guarantees certificate
forperipheral product of microcomputer
Name/model of product
Product No.
Code of invoice
Purchase date
Installation and debugging date
Guarantee date
Guarantee time Twelve month from the invoice issuing
date which remarked on the purchasing invoice
Serial number
Manufacture place China
Name of dealer
Address of dealer
Telephone of dealer
Postcode
Stamp of dealer
Name of purchaser
Address of purchase
Telephone of purchase
Postcode
(Please read carefully)
1.This warrant is three guarantees voucher and
maintenance voucher. Customers shall keep it well for
maintenance, exchange and reject according to
Maintenance, exchange and reject regulation of
microcomputer. With this card and effective invoice,
customers can enjoy the service in assignedservice
centers. Except for the regulation in this card you can also
enjoy other rights in three guarantees.
2. Please reserve the card carefully, lose don’t repair and
show it when maintenance.
3. All components in maintenance will not return to
customers, please forgive.
4. If there are any differences between the card and the
national rules, please take the national rules as the
standard.
After-sales service track records
Maintenance times
Maintenance date
Fault
Cause of fault
Statue
Inspection date
Maintenance engineer
Certificate for toxic and harmful substances
According to Chinese Electron Products Pollution Control
Management Methods, short for Management Methods or China
RoHS, the following sheet is toxic and harmful substance of our
products.
Toxic and harmful substances or element Name of
components
Leather
Lead
（Pb）
Mercury
（Hg）
Cadmium
（Cd）
Cr（Ⅵ）
Polybrominat
ed biphenyls
（PBB）
Poly
Brominated
Diphenyl
Ethers
（PBDE）
sheath
Upper/Bottom
cover
Battery
Protection
enclosure
Connection
lines
Foot pad
Key core
Magnetic iron
Circuit board including printing circuit board
and it’s components, like resistance, capacity,
integrated circuit, connector and so on.
０ The toxic and harmfully substance exist in all material and the
content isbelow to the limitation of Toxic and Harmfully Substance Limit
Standards of Electronic Products.
×The toxic and harmfully substance exist in at least one part of the
material, there is no mature technology to replace so it’s content is
over the Toxic and Har mfully Substance Limit Standards of Electronic
Products, but it meet the requirements of additional items and battery
instruction of European Union ROHS.
Free of three guarantees
1. Without this warranty and effective invoice.
2. The card is charged or do not match with the product.
3. The breakdown is caused by customers’ incorrect use,
like,pour into liquid, damaged by external force.
4. The breakdown caused by Force majeure.
5. The breakdown caused by self disassemble, repair or
repair by unassigned service center.
6. Water leak or damp.
7. Using environment is not meet the relevant national
requirements, like, 3C certification and so on.
8. Do on meet the requirements of three guarantees.
9. Warranty expired.
10.Do not use, maintenance and keep according to
product instruction.
FCC Statement:
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2)
this device must accept any interference received,
including interference that may cause undesired
operation.
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio
or television reception, which can be determined by
turning the equipment off and on, the user is
encouraged to try to correct the interference by one or
more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and
receiver.
—Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV
technician for help.
Caution: Any changes or modifications not expressly
approved by the party responsible for compliance could
void the user's authority to operate the equipment.
Loading...