DO Intelligent Technology 232 User Manual

Smart Bracelet

ID205

Please read the instructions carefully

and keep it safe.

Bind Watch

1. Download and install App

You can set up the watch through the VeryFitPro app for
iOS or Android devices. The steps are shown as follows:
Notes: The hardware platform of the equipment system
shall meet requirements.

iOS 8.0 version

or above

Correct operation: Scan the

QR code below or

download VeryFitPro APP

through the mobile APP

store to pair with the watch.

Andriod 4.4 system

or above

01 02 03 04 05 06 07 08 09 10 11 12 13 14 15

Support Bluetooth

5.0

Wrong operation: Pair the

watch directly with the

bluetooth in your mobile

phone’s settings.

2. Bind process

①Turn on the Bluetooth and

GPS on your mobile phone

②Find the binding request

on the pull-down list on the

home page of the APP

Notes:
During binding process, VeryFitPro will prompt you to
enable GPS and Bluetooth, and authorize VeryFitPro to
get access to the GPS on you mobile phone.
iPhones will not prompt you with any information unless
you complete Bluetooth pairing on your ID205 watch in the
built-in Bluetooth in you mobile phone after binding.

Select product

model: ID205

Click “Ok” to

complete binding.

Synchronous Data

In daily wear, the watch can
detect all kinds of product data.
The user needs to connect the
watch with bluetooth on the APP
before synchronous operation.
The detailed operations are
shown as follows:

Open the mobile APP> swipe
down the page> sync prompt
appears

Notes!
Please synchronize the data at least once within 7 days
to avoid data loss at the watch end.
The Apple phone also needs to be connected to the
paired watch in the bluetooth setting interface of the
mobile phone, so that the watch can be alerted. The
steps are shown as follows:

Open the IOS phone > set > bluetooth > search and click
pair

Instruction for Use

1. Charging schematic

Buckle the watch into the charger seat as shown in the
picture. It needs to be charged to activate the watch when it
is started for the first time.

2. Wear/install

Wear Replace the strap

Switch

Wear the wristband one finger away
from the wrist bone and adjust the
tightness of the wristband to a
comfortable position.

Tip: Wearing too loosely may affect the accuracy of heart
rate data.

Flip the switch and take

out the wristband

Operating Instructions

1. Definition of key function

Short press the

Long press the left
key:
Enter the sports
quickly

Left key setting steps: Function list > set > long press

2. Watch dial switch

Replacing the dial interface will
appear after long pressing the dial.

right key:
Return to previous
interface

Long press the
right key: start

3. Main interface operation

Swipe the screen to enter different interfaces (interactive
interface tile diagram)

Notice bar

Status bar

Data bar

Function list

interface

4. Dial data view (default dial)

Step number CalorieDistance

Click the screen to switch different data

Function Introduction

1. Icon function introduction

Help you regulate

your breathing and

relax your mood.

Have the timing
and countdown

function.

APP

Control music play

on your mobile

phone (watch

cannot store music)

Perform a heart

rate test to check

your heart rate

data for the day.

Enter the sports

window, and choose

different sports

modes. Change the

sports mode on the

Notes: For more functions (sleeping) and operation, please
check the VeryFitPro software of the mobile phone.

View, turn off or

turn on the alarm
clock. You need to
add an alarm clock
on the mobile APP.

Record recent

sportss.

2. Start sports

① Enter sports
Click the sports icon > select the sports type > enter
the sports countdown automatically
② During sports
Pause sports: short press the right key
Restore sports: short press the right key
③ End sports
End sports: long press the right key> select the end
button on the screen

3. Women’s health tracking

Display location: in the data bar

Women’s health tracking function, which is used for
recording menstrual changes, tracks individual menstrual
cycle and predicts ovulation (it needs to be enabled on the
APP).

Product Parameters

Model ID205 Screen type

Battery

capacity

Charging time

Waterproof

level

Operating

temperature

Product

frequency

210mAh

about 2.5 hours

5ATM

10°C—45°C

2402-2480MHz

Charging voltage

Battery life

Weight of product

Bluetooth version

Max. transmission

power consumption

Cleaning and Maintenance

1.3-inch
color screen

5V±0.2V

over 10 days

38g

BLE 5.0

-0.19dBm

It is recommended to wear and maintain according to the
following three points:

① Keep the product clean;
② Keep the product dry;
③ Do not wear it too tight.

Do not use household cleaners to clean the watch, but
use the soap free detergent.
It is recommended to use alcohol to scrub stains that are
not easy to remove.

Frequently Asked Questions

1. Mobile APP search for the watch failed
① It is recommended to update VeryFitPro to the latest
version.
② It is recommended to close all programs, restart the
Bluetooth, and then connect.
③ Confirm whether the mobile phone system meets Android

4.4 or IOS 8.0 or above.

2. The watch received no alerts, text messages or phone calls
① You need to turn on the smart reminder function and the call
reminder switch in the APP, and synchronize to the watch.
② The iphone needs to be paired with the watch via Bluetooth.
(Please check the column of "Synchronous Data" for details)
③ You need to keep your watch connected to Bluetooth.

3. Bluetooth is often disconnected
① If the distance between the watch and the mobile phone is
too far, the connection effect of more than 7m bluetooth is
obviously weakened.

② Whether there is a shield between the watch and the
mobile phone, the human body, wearing metal jewelry, etc.,
will interfere with the bluetooth connection signal.
③ Whether the bluetooth function of the mobile phone is
abnormal.

4. About data backup
The data of the watch is synchronized at least once every 7
days to the mobile phone (the watch end only keeps the
data of the last 7 days).

5. How to restart and restore factory settings
Shutdown operation: Watch > set > shutdown/right-key
restart
Restore factory settings: connect watch to APP > open APP
> device model > more settings

6. Do I need to keep my bluetooth on when I wear my watch?
① For the three functions, i.e. counting steps, sleeping and
alarm clock, you do not need to connect the watch to the
mobile phone all the time. If you only need to wear a watch
when you exercise, you can connect the watch and your
mobile phone to view the data synchronously after the
exercise.
② For the functions of call alert, message alert, find the
phone, you need to turn on the mobile phone’s bluetooth, and
maintain the connection with the mobile phone.

More detailed questions can be answered with help and
feedback in the APP.
Operation steps:VeryFitPro > > help and feedback

Safety and Product Information Notes

Warning

Battery warning
Do not disassemble, bore or damage the battery. Do not
disassemble the built-in batteries of non-replaceable battery
devices. Do not use sharp objects to remove the battery.

Health Warning
If you are wearing a pacemaker or other implanted electronic
devices, please consult your doctor before using the heart
rate monitoring strap.
The watch’s optical heart rate sensor glows green and
flashes. If you suffer from epilepsy or are sensitive to blinking
light sources, please consult your physician if you can wear
this product.
The device tracks your daily activities through sensors. These
data are intended to tell you about your daily activities, such
as steps, sleep, distance, heart rate and calories, but may not
be completely accurate.
The device, accessories, heart rate sensors and other
relevant data are designed for entertainment and fitness, not
for medical purposes. They are not applicable to the
diagnosis, monitoring, treatment or prevention of any
diseases or symptoms. The heart rate data is for reference
only. We are not responsible for any consequences caused
by any data deviation.

Cycling Warning
Please maintain good judgment at all times and ride in a safe
manner. Make sure your bike and hardware are properly
maintained, and all components are properly installed.

Matters Needing Attention
Watch data needs to be kept once every 7 days to avoid
data loss.
The watch has no waterproof effect on seawater, acidic
and alkaline solutions, chemical reagents and other
corrosive liquid. The damage or defects caused by misuse
or improper use are not covered by the warranty.
Sports mode supports up to 6 hours of exercise at a time.
The watch has a waterproof level of 5ATM and supports
cold water shower, swimming, but not diving.
Avoid wearing the watch too tight in daily use. Please keep
the parts of the watch touching the skin dry.
When your heart rate is measured, keep your arm still
during the test.

The device meets the EU ROHS criterion.
Please refer to IEC 62321, EU ROHS
Directive 2011/65/EU and revised directive.

This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.

Changes or modifications not expressly approved by the party
responsible for compliance could avoid the user’s authority to operate
the equipment.This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation.

If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:

-- Reorient or relocate the receiving antenna.

-- Increase the separation between the equipment and receiver.

-- Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.

-- Consult the dealer or an experienced radio/TV technician for help.

CAUTION

RISK OF EXPLOSION IF BATTERY IS REPLACED

BY AN INCORRECT TYPE

DISPOSE OF USED BATTERIES ACCORDING

TO THE INSTRUCTIONS

Old electrical appliances must not be disposed of

together with the residual waste, but have to be

disposed of separately. The disposal at the communal

collecting point via private persons is for free. The

owner of old appliances is responsible to bring the

appliances to these collecting points or to similar

collection points. With this little personal effort, you

contribute to recycle valuable raw materials and the

treatment of toxic substances.