Dogwatch DWFBLSH2 Users Manual

BigLeash®Firefly®Features

The BigLeash Firefly Receiver provides a built-in light to help you keep track of
your dog at night. The Firefly light can be activated from the BigLeash Transmitter.

BIGLEASH FIREFLY RECEIVER

tatus Light*

S

Firefly Light Strips

1. Turn “on” the BigLeash by holding the Receiver
and the Transmitter next to each other at the
Alignment Markers. If you are using the BigLeash
for two dogs, turn on both Receivers.

2. To activate the Firefly light strips on Collar 1,
press the Collar 1 button on the Transmitter.

3. To activate the Firefly light strips on Collar 2,
press the Collar 2 button on the Transmitter.

Transmitter/Receiver
ON/OFF Alignment Markers

▲▲ ▲

* Status Light

Blinks Green = Turned on, battery charged
Blinks Red = Turned on, low battery
Steady Red = Plugged-in, charging
Steady Green =Plugged-in, fully charged

BIGLEASH TRANSMITTER

Use Collar 1 / Collar 2 buttons

to switch from Collar 1 to Collar 2

and to activate the Firefly light.

Activates Firefly light on Collar 1

1

Activates Firefly light on Collar 2

2

• Press the Collar 1 or Collar 2 button briefly, the light

strip blinks briefly.

• Press the Collar 1 or Collar 2 button for 5 seconds,

the light stays on and continues to blink. To turn “off”,
press button again for 5 seconds until the light stops
blinking.

• When switching between Collar 1 and Collar 2, the

light strip will blink briefly on the collar which is
receiving the signal from the transmitter.

Correction Level
Adjustment

1 = Mildest

10 = Strongest

Correction Buttons:

A = Audible &

Vibration

B = Brief

C = Continuous

Transmitter/Receiver
ON/OFF Alignment Markers

▲ ▲▲