Dogtra YS300 User Manual

OVERVIEW
MAIN FEATURES
SAFETY PRECAUTIONS
PACKAGE CONTENTS
DESCRIPTION
TESTING YOUR NO BARK COLLAR
FITTING THE COLLAR
MAINTENANCE
TROUBLESHOOTING
FREQUENTLY ASKED QUESTIONS
WARRANTY AND REPAIR
3
4
5
7
8
14
16
18
18
19
20
22
2
CONTENTS
3
OVERVIEW
Thank you for purchasing the dogtra “No Bark Collar” Model YS300!
This product has been specifically designed to prevent your dog from barking excessively by emitting an automatic electrical stimulation when your dog barks. The is a safe No Bark Collar intended for small to medium (sensitive) sized dogs.
Instructions are included. Please read them thoroughly before using your “ ”.
OVERVIEW
4
Non-electrical stimulation vibration (P) warning prior to the stimulation.
6 intensity levels (2-7) for a wide variety of dispositions.
Test Mode (T) for testing the No Bark Collar.
Rechargeable 2-hour rapid charge Lithium Polymer Battery.
Fits dogs as small as 10 lbs. (Receiver weight : 4.0 ounces)
Tri-Color LED Battery Life Indicator.
Fully waterproof.
Small size - 2.63” X 1.81” X 1.14”
Light weight - 4.0 ounces.
Made with surgical stainless steel and anti­microbial protection (straps), for a clean, odor fighting, long lasting product.
15 seconds delay period in-between stimulation corrections to help your dog figure out the corrections better.
MAIN FEATURES
MAIN FEATURES
5
SAFETY PRECAUTIONS
Your dogtra “No Bark Collar” is a valuable training aid when used correctly.
The Dogtra No Bark Collar is made with surgical stainless steel and anti-microbial protection (straps), for a clean, odor fighting, long lasting product. Please observe your dog’s neck everyday because it may rub as the dog moves, causing irritation if the collar is too loose.
To prevent skin irritation, the collar should not be worn more than 8-hours at a time.
Also, it is best to move the location of the contact points every few hours. To do this, take the collar off and then put it back on so that the contact points are in a different location on the neck.
If skin irritation is found, wash the area and rinse with hydrogen peroxide. Apply an antibiotic ointment. Temporarily discontinue using the collar until the skin has healed.
Proper collar strap tightness is extremely important. If the collar is too loose, it will not function properly and it may rub as the dog moves, causing irritation.
SAFETY PRECAUTIONS
6
SAFETY PRECAUTIONS
No Bark Collars are intended for the sole
purpose of preventing the dog from barking.
Do not attempt to test dogtra No Bark Collars on humans or other animals.
Dogs should be in good health during this collar training.
No Bark Collars are not intended for use on dogs weighing less than 10 pounds or less than 6 months of age. If you have any concerns, please consult with your trainer.
The Dogtra YS300 has a preset delay of 15 seconds in-between corrections. Once the unit activates, it WILL NOT activate again until 15 seconds has gone by. The reason for the delay is so that your dog has some time to figure out the implications of the corrections, before being corrected again for barking.
IMPORTANT : Please remove the No Bark
Collar before playing with your dog.The activity may cause your dog to bark, which could lead him to associate playing with the electrical stimulation
No Bark Collar with collar strap
Lithium Polymer Battery Charger
Owner’s Manual
Plastic Dummy Contact Points
COLLAR
PACKAGE CONTENTS
7
PACKAGE CONTENTS
Loading...
+ 8 hidden pages