Please read all safety and product
information below before using your
Dogtra product. Failure to follow these
safety instructions could result in injury
to you, your dog and others, or it could
result in damage to your Dogtra product
or other property.
PRODUCT SAFETY
Training Methods
Dogtra products may be used with a
variety of training methods. However,
each dog may have a different reaction
2
to training methods and to Dogtra
products. Closely observe your dog when
determining the right training method to
use with your Dogtra product.
Aggressive Dogs
Do not use Dogtra products with
aggressive dogs as such dogs may react
adversely and cause injury to people or
other dogs. Seek the assistance of a dogtraining specialist or veterinarian when
dealing with aggressive dogs.
Children
Dogtra products are not toys. Adult
supervision and close attention are
necessary when Dogtra products are
used by or near children.
PRODUCT DAMAGE
Electrical Product
Your Dogtra product contains electrical
components and batteries. Do not
use or keep your product near heat or
flammable sources. Such use or storage
may damage your product and/or
cause fire, explosion, injury, or property
damage.
Medical Device Interference
Dogtra products contain electrical and
magnetic components that emit low
level electromagnetic waves and radio
frequencies. These electromagnetic
waves or radio frequencies may interfere
with pacemakers, defibrillators, or
other medical devices. Consult your
physician or medical device maker
before using your medical device with
a Dogtra product. If you think that your
Dogtra product is interfering with your
pacemaker, defibrillator, or other medical
device, stop using the Dogtra product.
Inadvertent Activation
The digital microprocessor offers
thousands of unique codes to eliminate
frequency match-up with other Dogtra
e-collars. The Constant button will
automatically shut down after being held
down for 12 seconds or more as a safety
feature.
3
UNAUTHORIZED USE
Your Dogtra product should be used
only in a humane manner to train and
educate your dog. Dogtra products are
not intended for use in any other manner
nor are they intended for use with other
animals or with humans.
BATTERY
Your Dogtra product contains batteries.
Take care when removing and installing
batteries as your fingers may get caught.
Dispose of batteries as provided by your
local regulations. Do not disassemble,
crush, heat, or otherwise alter the battery
as it may cause fire, injury or property
damage.
4
CONTENTS
AT A GLANCE
MAIN FEATURES
OVERVIEW
UNDERSTANDING YOUR TRAINING SYSTEM
1. TURNING THE iQ MINI ON/OFF
2. TRANSMITTER BUTTON FUNCTION
3. RECEIVER FITTING
4. FINDING THE RIGHT STIMULATION
5. MAXIMIZING THE DISTANCE
6. LED INDICATOR
7. CHARGING THE BATTERY
8. CODE SETTING
GENERAL TRAINING TIPS
MAINTENANCE
TROUBLESHOOTING GUIDE
WARRANTY AND REPAIR INFORMATION
Auto Charger: The auto charger for the iQ MINI has an input of 12-volts to 24-volts and
has an output of 5-volts 1000mAH.
European Charger: designed for use with 230 volt AC electrical outlets in Europe.
To purchase optional accessories, please visit www.dogtra.com or
call our customer service at (888) 811-9111.
6
MAIN FEATURES
Easy-to-use, ergonomically fitted
•
transmitter
• Nick/Constant stimulation & Pager
vibration
• Front-facing Rheostat Dial that allows
for gradual adjustments in stimulation
intensity with no jumps between levels
(0-100)
• Expandable to 2-dogs
• 400-yard range
• 2-hour rapid charge batteries
• 1.3 oz. petite receiver
• Conductive plastic contact points for
sensitive skin
• For dogs as small as 7 pounds
7
OVERVIEW
1st Dog/2nd Dog
Toggle Switch
Constant
8
Nick
Pager
Antenna
Rheostat
Dial
LED Indicator
Light
iQ MINI
Transmitter
On/Off Magnetic
Red Dot
Battery Charging
Receptacle &
Rubber Plug
Collar Strap
Conductive
Plastic
Contact
Points
Battery Charging
Receptacle
LED Indicator
Light
iQ MINI
Receiver
On/Off Magnetic
Red Dot
9
UNDERSTANDING YOUR TRAINING SYSTEM
1. Turning the iQ MINI On/Off
10
o turn the receiver on, place the red dot
T
on the back of the handheld transmitter
to the red dot on the receiver. Hold the
two red dots together for a moment until
the LED light on the receiver comes on.
To turn the receiver off, repeat the same
procedure holding the two red dots
together momentarily. The LED light will
turn red for a brief moment indicating
that the receiver is now off.
The handheld transmitter does not have
an on/off button and it will only activate
when the buttons are pressed.
Loading...
+ 22 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.