Dogtra e-Fence System Owner's Manual

OWNER’S MANUAL

CONTENTS

2

OVERVIEW

Thank you for purchasing our dogtra e-Fence System.

With dogtra e-Fence System your dog can freely play around within the boundaries you

have selected.

With the proper training you will enjoy seeing your dog in good demeanor.

MAIN FEATURES

• Collar/Receiver – Newly designed to make adjusting the collar strap easy.

• Waterproof Housing – The collar/receiver is waterproof.

• Wall transmitter features lightning/surge protection.

• Dogtra e-Fence has a warning/vibration signal before electrical stimulation/correction is

given to the dog.

• A wire indicator shows the continuity of fencing wires.

• Levels are easily adjusted using the intensity selection dial on the wall mount transmitter.

• Dogtra e-Fence is easy to install and use.

3

SAFETY

• Dogtra e-Fence collars use state-of-the-art microcomputer technology. The receiver has

an automatic control which limits the stimulus to eight seconds.

• Dogtra’s filtering system prevents reception from outside sources other than your

transmitter.

DOGTRA e-Fence System PACKAGE CONTENTS

• Wall-Mount Transmitter

• Collar/Receiver

• Battery Charger and Adapter

• Tes t La mp

• Flags (boundary training flags)

• Underground Fence Wire (500 feet)

• Splicer

• Lightning/Surge Protective Wire

• Accessory Magnet

• Transmitter Mount Screws (2ea)

• Owner’s Manual

4

DESCRIPTION OF TRANSMITTER PARTS

dogtra e-Fence Transmitter

Wire Indicator Light

ON/OFF Indicator Light

ON/OFF & Function

Selection Switch

Intensity Selection

Dial

Field Width

Adjustment Knob

Wire Connectors

Adaptor Jack Connector

5

ON/OFF & Function Selection Switch

The On/Off Selection switch has three functions. When the toggle switch is up, the

warning/vibration followed by stimulation will occur. When this switch is down, only

stimulation occurs. When the switch is in the middle, the power is Off.

Pager/Stimulation

OFF

Stimulation

6

Field Width Adjustment Knob

This knob controls the width of the signal field (the distance from the boundary wire to the

location where the collar/receiver first activates). Turning the knob clockwise increases the

field width, giving your dog wider buffer area before the activation. Turning it

counterclockwise decreases the distance between the dog and fence before activation.

Intensity Selection Dial

The Intensity Selection Dial controls the stimulation level. Level 1 is the lowest setting and

level 5 is the highest. It is always best to start at level 1 and increase the levels until you

find a level where the dog reacts to the stimulation but does not overreact with excessive

vocalization.

7

ON/OFF Indicator Light

When the On/Off & Function Selection switch is either in the up or down position, the LED

light will be on, indicating that the power is on. When the switch is in the middle position,

the light goes off, indicating that the power is off.

8

Wire Indicator Light

When the wires are connected properly, the wire indicator light will be on. In the event the

e-Fence wire becomes damaged, the light will automatically turn off.

9

Black Connector

(for the protective wires)

Wire Connectors

The easy-to-use push-release wire connectors let you instantly connect or disconnect the

boundary wire leads. Wires should be stripped about a half inch before being inserted into

the red connectors on the bottom of the wall mount transmitter.

Dogra e-Fence comes with lightning/surge protective wires. Insert the protective wires to

the black connector on the bottom of the wall transmitter.

10