WARNING
Please read all safety and product information below
before using your Dogtra product. Failure to follow these
safety instructions could result in injury to you, your dog
and others, or it could result in damage to your Dogtra
product or other property.
PRODUCT SAFETY
Training Methods
Dogtra products may be used with a variety of training
methods. However, each dog may have a different reaction
to training methods and to Dogtra products. Closely
observe your dog when determining the right training
method to use with your Dogtra product.
Aggressive Dogs
Do not use Dogtra products with aggressive dogs as such
dogs may react adversely and cause injury to people or
other dogs. Seek the assistance of a dog-training specialist
or veterinarian when dealing with aggressive dogs.
Children
Dogtra products are not toys. Adult supervision and close
attention are necessary when Dogtra products are used by
or near children.
PRODUCT DAMAGE
Electrical Product
Your Dogtra product contains electrical components and
batteries. Do not use or keep your product near heat or
flammable sources. Such use or storage may damage your
product and/or cause fire, explosion, injury, or property
damage.
2
Medical Device Interference
Dogtra products contain electrical and magnetic
components that emit low level electromagnetic waves and
radio frequencies. These electromagnetic waves or radio
frequencies may interfere with pacemakers, defibrillators,
or other medical devices. Consult your physician or medical
device maker before using your medical device
with a Dogtra product. If you think that your Dogtra
product is interfering with your pacemaker, defibrillator, or
other medical device, stop using the Dogtra product.
Inadvertent Activation
The digital microprocessor offers thousands of unique
codes to eliminate frequency match-up with other Dogtra
e-collars. The Constant button will automatically shut down
after being held down for 12 seconds or more as a safety
feature.
UNAUTHORIZED USE
Your Dogtra product should be used only in a humane
manner to train and educate your dog. Dogtra products
are not intended for use in any other manner nor are they
intended for use with other animals or with humans.
BAT TERY
Your Dogtra product contains batteries. Take care when
removing and installing batteries as your fingers may get
caught. Dispose of batteries as provided by your local
regulations. Do not disassemble, crush, heat, or otherwise
alter the battery as it may cause fire, injury or property
damage.
3
CONTENTS
AT A GLANCE
MAIN FEATURES
OVERVIEW
UNDERSTANDING YOUR TRAINING SYSTEM
TURNING THE DUAL DIAL ON/OFF
1.
TRANSMITTER BUTTON FUNCTION
2.
FINDING THE RIGHT STIMULATION
3.
MAXIMIZING THE DISTANCE
4.
LED INDICATOR
5.
CHARGING THE BATTERY
6.
HANDHELD TRANSMITTER OLED
7.
ATTACHING THE BELT CLIP
8.
CODE SETTING GUIDE
9.
GENERAL TRAINING TIPS
MAINTENANCE
TROUBLESHOOTING GUIDE
WARRANTY AND REPAIR INFORMATION
The auto charger for the DUAL DIAL has an input
of 12-volts to 24-volts and has an output of 10-volts
1500mAH.
European Charger
Dogtra’s European chargers are designed for use with a
220 volt AC electrical outlet.
To purchase accessories, please visit www.dogtra.com or
call customer service at (888) 811-9111.
5
MAIN FEATURES
Rheostat Dial that allows for gradual adjustments in
•
stimulation intensity with no jumps between levels
(0-127)
Two-dog model allows control of two different dogs
•
from one transmitter
1.5-mile range
•
Two different stimulation types - Nick & Constant
•
Pager vibration
•
2-hour rapid charge lithium polymer batteries
•
Safety Stimulation Level Lock
•
Easily visible OLED screen displays each dog
•
Three bar battery life indicator and LED colored
•
indicator to show battery life
6
OVERVIEW
2nd Dog
Rheostat Dial
2nd Dog
Nick
2nd Dog
Constant
2nd Dog
Pager
1st Dog
Rheostat Dial
1st Dog
Nick
1st Dog
Constant
1st Dog
Pager
DUAL DIAL
Transmitter
7
Antenna
Safety Stimulation
Level Lock
Toggle Switch
OLED
Screen
8
On/Off Button &
OLED Screen
Button
Battery Charging
Receptacle &
Rubber Plug
On/Off Magnetic
Red Dot
DUAL DIAL
Transmitter
UNDERSTANDING YOUR
TRAINING SYSTEM
1. Turning the DUAL DIAL On/Off
To turn the handheld transmitter on, hold down the
button on the right side of the transmitter until the OLED
screen illuminates. To turn the transmitter off, hold down
the same button on the right side of the transmitter until
the OLED screen shuts off.
On/Off
Button
9
2. Transmitter Button Function
1) Safety Stimulation Level Lock Toggle Switch
Lock StimulationUnlock Stimulation
MODE
DOG
Lv.
10
1
DOG
127Lv.
2
Locked ScreenUnlocked Screen
The back of the transmitter has a Safety Stimulation
Level Lock Toggle Switch. When the toggle switch is
locked, the stimulation level will lock in place and not
change even if the Rheostat Dial is adjusted. When the
toggle switch is unlocked, the stimulation level can be
changed again. Please change the stimulation level
when unlocking the toggle switch to make sure you are
correcting your dog at the right level since the Rheostat
Dial may have moved.
10
DOG
1
DOG
2
Lv.
MODE
10
127Lv.
2) Button
2nd Dog
Nick
Constant
Pager
Nick Button
The Nick button is the top button on each side of the
transmitter. When the Nick button is pressed, the receiver
emits a single rapid pulse of electrical stimulation.
MODE
DOG
Lv.
10
1
DOG
127Lv.
2
Button not pressed
DOG
1
DOG
2
Button pressed
(Nick)
Lv.
1st Dog
Nick
Constant
Pager
MODE
NICK
10
127Lv.
11
Loading...
+ 24 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.