Dofit Delta User Manual

GPS Smartwatch

User Manual

Please read the manual before use.

1. Product Overview

Controls1.1

1.1.1 Power button: Power On/ Off: Waken/turnoff screen: Back to main menu.

1.1.2 Rotary button: turn to select functions: press in to confirm screen request.

1.1.3 Shortcut button: press to enter sports mode directly: when screen is off,
press to turn screen on.

Button Index Touch Screen

Shortcut

Mic hole

Rotary

Power

Swipe up or down

Swipe le or right

Charging1.2

Use external Power Base which attaches magnetically.

Magnetic
Connector

Tap the screen

Power Base

USB Charge

1.2.1 Smartwatch battery capacity = 400mAh: Power Base is 400mAh.

1.2.2 Charge Smartwatch by attaching Power Base, which can simultaneously
be attached to external power source.

1.2.3 When charging Power base, the blue lights will flash until fully
charged: (blue lights will then remain on, without flashing).

Touch Screen1.3

1.3.1 When on main screen, swipe left or right to enter sub screens.

Phone is not

connected. Do you

want to connect?

Connect Cancel

Connectivity

screen

Clock

(main screen)

Mode screen

1.3.2 To enter any of the mode screen functions, tap on icon
(see explanatory notes later).

1.3.3 To change clock display, press and hold the clock screen to access and
select clock display options: when screen selected, press rotary for
confirmation.

1.3.4 Main screen submenus: To access sub-menus, select either main screen or
mode screen: slide up or down to see all the functions within the menus.

Clock

(main screen)

Sport selection

Essentials Weather Daily

Calendar

activity

Sleep Heart rate LocationPressure/

Altitude

1.3.5 Mode Screen Submenus

Mode screen1 Mode screen2 Mode screen3

1.3.5.1 Whenever in any sub screen, tap on icon to access options, receive
information and personalize where appropriate.

2. Pairing your Smartwatch with the DoFit GPS App

Bluetooth Activation2.1

2.1.1 Ensure your Smartwatch’s Bluetooth is activated: to activate:

2.1.1.1 Enter Mode Screen 1 (see 1.3.5 above).

2.1.1.2 Tap settings icon

2.1.1.3 Tap Bluetooth icon and ensure that Bluetooth is set to “on”.

2.1.2 Ensure your Smartphone’s Bluetooth is on.

2.1.3 Note that only after the app is installed will the Smartwatch be synced to
your Smartphone, otherwise Sync Failure will occur.

2.1.4 If at any time your Smartwatch Bluetooth connection fails, enter home
screen of app and tap refresh button : follow the prompts as directed.

Installing DoFit GPS App: Android2.2

2.2.1 Install and open DoFit GPS App and fill in your personal information
including targets.

Android APP

2.2.2 App will search for the Smartwatch within 10m.

2.2.3 When DoFit 2 appears, tap “binding” (if DoFit 2 is not found, tap refresh button).

2.2.4 Select OK to connect.

2.2.5 A Passkey confirmation will be required to pair: press OK.

2.2.6 Allow the device to have access to your contacts and call log.
7 Allow a few minutes for Smartwatch to be connected to DoFit GPS App.

2.2.

2.2.8 When appears in top left-hand corner of app home page,

you are connected. If appears, then press refresh button to
reconnect to phone (follow prompts).

Installing DoFit GPS App: iPhone2.3

2.3.1 Install and open DoFit GPS App and fill in your personal information
including targets.

iOS APP

2.3.2 App will search for the Smartwatch within 10m.

2.3.3 When DoFit to LE appears, tap binding (if DoFit LE is not found, tap refresh
button). Open iPhone Bluetooth settings and connect with DoFit 2:
(do not select DoFit 2 LE in Bluetooth settings – this is already connected
via App).

2.3.4 Select OK to connect.

2.3.5 A Passkey confirmation will be required to pair: press OK.

2.3.6 Allow the device to have access to your contacts and call log.

2.3.7 Allow a few minutes for Smartwatch to be connected to DoFit GPS App.

2.3.8 When appears in top left-hand corner of app home page,

you are connected. If appears, then press refresh button to
reconnect to phone (follow prompts).

HOME Page on App:2.4

2.4.1 The current 24-hour period stepping activity (indicating steps taken,
calories consumed, distance walked, duration) will automatically
appear when connected to Smartwatch (top half of App Home page).

2.4.1.1 Tap any of the four activities (steps, calories, distance, duration)
to see a graphical representation of the day’s current activities and
history for the last week.

2.4.2 Tap the sleep icon for sleep history in the last week (Note: this will be
defaulted to the period 22:00 to 08:00: this can be

changed on the

Smartwatch – see 5.4).

2.4.3 Tapping Activity will reflect the number of hours (during a 15 hour period)
that you’ve exceeded 300 steps in that period.

2.4.3.1 By tapping Settings icon in Activity, you can select the start and the
end time for this 300 step calculation: it should not overlap with your
sleeping period selected: defaulted at 22:00 to 08:00.

Note the maximum activity period is 14 hours.

2.4.4 Tap on refresh to synchronize and update data between the
Smartwatch and Smartphone.

2.4.5 Heart rate (see 5.3):

2.4.5.1 Will reflect the time the last heart

rate was taken and the BPM

(only in manual mode).

2.4.5.2 Tap on Heart Rate icon and then synchronize to update data.

2.4.5.3 History of last 20 heart rates taken will appear on the screen.

2.4.5.4 Tap on ? to see your customized heart rate zones which are based on
the information you’ve entered (height, weight, age).

TIME SHAFT Page on App:2.5

2.5.1 – Tap on icon to see details of recent activity.

2.5.2 – Select date at top of page by tapping > or < .

2.5.3 – When activity appears, tap on activity to see full details thereof.

GOALS page on app:2.6

Indicates your target achievements: tap target to see details of targets set.

ME Page on App: General2.7

2.7.1 Tap on pic to personalize profile: you can also adjust your settings and
personalize pic (long press on blank pic).

2.7.2 Unit: select metric or imperial.

2.7.3 Feedback – send us your feedback or visit our website - www.dofit.co.za.

ME Page on App: Device Settings:2.8

2.8.1 Find device: tap to sound Smartwatch.

2.8.2 Anti-loss alert: turn on to receive warning on Smartwatch when Smartwatch
is disconnected from Smartphone (normally when outside 10m radius).

2.8.3 Edit Bluetooth name: personalize if desired (not available for iPhone).

2.8.4 Message Push: personalize which notification/messages must be sent to
your Smartwatch.

2.8.4.1 Activate Close All to receive no messages (especially so that you are
not disturbed during exercise).

2.8.4.2 Ensure that you manually open notification authority from which the
notification will be received (the list will be all the apps you have opened).

Enable DoFit GPS to receive notifications from your Smartphone.

2.8.5 Sedentary reminder:

2.8.5.1 Set reminders at selected time intervals for exercise (note if movement
takes place during the sedentary period, alarm is automatically reset to
original time period)

.

2.8.6 Temperature Mode: Select Celsius or Farenheit.

2.8.7 Personalise dial: select by tapping and selecting “Push to watch”.

2.8.8 By tapping unpaired, the App unpairs from the current device and
searches for a new device.

2.8.9 If synchronization or any of the settings are working erratically,
turn off Smartwatch and restart it.

2.8.10 Note: this manual might be out of date if there have been further updates:
for further information go to website: www.dofit.co.za to see latest manual.

Strava Settings2.9

2.9.1 Make sure you have downloaded the Strava App and have a working login
before proceeding.

2.9.2 Open app and select ME page.

2.9.3 Tap blank Avatar pic and on user profile select Strava.

2.9.4 You’ll be asked to authorize – confirm.