doepfer
A-181
MULTIP LES 2
System A - 100
1. Introduction
Module A-181 (MULTIPLES 2) is a double set of
multiple sockets
quarter-inch as well as 3.5 mm plugs.
The upper section has three inter-linked sockets,
including one 6.3 mm mono jack socket. This makes
it easy to connect the A-100 to the big scary world of
quarter-inch jack connectors, without having to use a
special cable.
Typical applications might be to send the audio out
from the A-100 directly to a mixer or amplifier, or to
patch audio signals or control voltages in to the A-100
from a source (sampler output, MIDI-CV interface,
etc.) which has 6.3mm connectors.
The lower section comprises one 6.3 mm stereo
jack socket and two standard A-100 3.5 mm sockets
(see fig. 1). A typical use might be to send a stereo
audio output to a mixer channel which uses a stereo
6.3 mm connector.
MULTIPLES 2
. Unlike module A-180, it takes
A-181
1
A-181
MULTIPLES 2
System A - 100
doepfer
2. Overview
A-181
MULTIPLES 2
In / Outputs
!, ", §
$ : socket for 6.3 mm stereo jack
%
&
fig. 1
: three internally linked sockets, one of
which (!) is a 6.3 mm mono jack
socket
: socket internally linked to the
the plug inserted into socket $ (see
fig. 1)
: socket internally linked to the
the plug inserted into socket $ (see
fig. 1)
GND
: connection diagram for a plug patched into
socket
$
tip
ring
of
of
2
doepfer
3. Patch-Sheet
System A - 100
MULTIPLES 2
A-181
The following diagrams of the module can help
you recall your own Patches. They’re designed so
that a complete 19” rack of modules will fit onto an
A4 sheet of paper.
Photocopy this page, and cut out the pictures of
this and your other modules. You can then stick
them onto another piece of paper, and create a
diagram of your own system.
Make multiple copies of your composite diagram,
and use them for remembering good patches and
set-ups.
P Draw in patchleads with colored pens.
A-181
MULTIPLES 2
A-181
MULTIPLES 2
A-181
MULTIPLES 2
A-181
MULTIPLES 2
3
A-181
MULTIPLES 2
System A - 100
doepfer
4
Loading...