Dod Carcosa Fuzz User Manual
1 2
3 4
9
5
6
8
1. BEFORE - Increases/Decreases the amount of fuzz.
2. OUTPUT - Increases/Decreases the overall output level, there is a lot of level here so
this can be used as a boost.
3. AFTER - Bias Control changes the texture of the fuzz. Counter-clockwise attains loud
“woody” fuzz tones that clean up with the guitar volume knob, and full
clockwise attains splatty “broken” fuzz tones and “horn-like” vowel sounds
and sustain. Middle-ranges go from familiar classic to more modern “wall-ofsound” fuzz voicings.
7
4. HI-CUT - Reduces the amount of high-frequency detail. Start at the 9:00 position
and adjust counter-clockwise for brighter pickups, and clockwise for darker
pickups. Don’t be afraid to use the extreme ranges of this control since
changes to the AFTER bias control also change the tone of the fuzz. You
may nd higher volume boost settings or stage levels will also require highfrequency adjustment.
5. IN - connect your instrument here.
Loading...