Docomo SO-01C Instruction Manual

Download

INSTRUCTION MANUAL

’11.2

W-CDMA, GSM/GPRS and Wireless LAN Systems

DOCOMO

Thank you for your purchase of "SO-01C".

For proper use of the SO-01C, read this manual and each manual attached to other optional devices carefully before and while you use the SO-01C. For more information on manuals, contact "General Inquiries" on the last page of this manual. SO-01C is the efficient partner of yours. Please handle the SO-01C with care and use it regularly for a long time.

Before using the FOMA terminal

● Because a FOMA terminal operates using radio frequencies, it cannot be used inside a tunnel,

underground, in a building or other locations where radio waves do not reach the FOMA terminal, in locations with weak radio wave condition, or outside of the FOMA's service area. The FOMA services may not be available on high upper floors of high-rise apartments or buildings, even if you can see no obstructions around you. On occasion, your calls may become disconnected even in areas with strong radio wave condition, even if you are not moving, or even if there are 4-antenna marks in the FOMA terminal's display.

● Please use discretion and mind your manners when using the FOMA terminal in public areas or crowded/

quiet places to keep from bothering others.

● Note that because the FOMA terminal operates on radio frequencies, your calls are at risk of being

intercepted by the third party. However, the W-CDMA, GSM/GPRS system automatically scrambles all calls through a private call feature. Therefore, even if third party successfully intercepts your call, they will only hear noise.

● The FOMA terminal operates on radio frequencies by converting voice into digital signals. If the caller

moves into an area of adverse radio wave condition, the digital signal may not restored accurately, and the voice received in the call may differ slightly from the actual voice.

● This FOMA terminal has FOMA Plus-Area and FOMA HIGH-SPEED Area support.

● The FOMA ter minal can be used only via the FOMA network provided by DOCOMO and DOCOMO's

roaming area.

● Always keep the information you save in the FOMA terminal in a separate note. Even if the data may be lost

as a result of malfunction, repair, change, or other handling of the FOMA terminal, under no condition will DOCOMO be held liable for any lost data saved in the FOMA terminal.

● As with PCs, some user-installed applications may disrupt the stability of the FOMA terminal performance,

or unexpectedly transmit information via the Internet causing improper use of your location information as well as personal information recorded on the terminal. Therefore, verify the supplier and operating conditions of the applications to be used before using them.

About manuals of SO-01C

In addition to this manual, the operations of SO-01C are described in "Quick Start Guide" (in Japanese only) and "SO-01C eトリセツ

（取扱説明書） (SO-01C e Instruction manual)"

application of the FOMA terminal.

"Quick Start Guide" (Supplied accessories)

The initial operations and settings after purchasing the FOMA terminal, screen view contents and operations of main function are explained. (In Japanese only)

"Instruction Manual" (Application of the FOMA terminal)

Similarly to this manual, operations and settings of each function are explained. To use "SO-01C eトリセツ（取扱説明書） (SO-01C e Instruction manual)" application, from the Home screen, tap X [Instruction Manual]. For the first time using, download and install it according to the onscreen instructions. You can use the application as an electronic book. You can also shift to actual operations by tapping the description in the contents or view reference contents.

❖Cautions

･ For downloading or updating the application, a

high packet communication charge will be applied because of a large amount data communication. For this reason, subscription of packet flat-rate service is highly recommended. * If you use Wi-Fi function to download, packet

communication charges are not applied.

"Instruction Manual" (PDF file)

Operations and settings of each function are explained. It can be downloaded from NTT DOCOMO website. http://www.nttdocomo.co.jp/support/trouble/ manual/download/index.html * The URL and contents are subject to

change without prior notice.

❖Cautions

･ Reproduction or reprint of all or part of this manual

without prior permission is prohibited.

･ Important information for SO-01C is posted in the

following website. Be sure to check before using. http://www.sonyericsson.co.jp/support/ use_support/product/so-01c/

Operation descriptions

In this manual, each key operations are described with p, x, y, t, m, k. And selection operations of the icons or function items on the touch panel are described as follows.

Description Operation

From the Home screen, press t and tap [Settings].

Tap [Settings] X [Date & time] X [Set date].

Tap or to adjust the date.

Touch and hold the title bar of the folder.

From the Home screen, press t (Menu) key and tap "Settings" on the screen.

Tap "Settings" displayed on the screen, and then tap "Date & time" on the next screen and "Set date" on the following screen in order.

Tap or displayed on the screen and adjust the date.

Keep touching the title bar of the folder longer (1-2 seconds).

❖Information

･ In this manual, the instructions are described with

the default Home screen. If you set the other application to the home screen, the operations may differ from the descriptions.

･ Display examples and illustrations used in this

manual are just images for explanations and may be different from actual ones.

･ In this manual, the easier procedure is described

for the functions and settings which have multiple operating procedures.

･ Please note that "SO-01C" is called the "FOMA

terminal" in this "Instruction Manual".

Accessories and main options

Supplied accessories

･ SO-01C (with warranty and Back Cover

SO14)

･ Battery Pack SO05

･ AC Adapter Cable SO02 (with warranty)

･ microSDHC card (16GB)* (Sample)

･ Quick Start Guide (In Japanese only)

クイックスタートガイド

･ Notes on usage

Safety/Handling precautions

* Inserted in the FOMA terminal when purchased.

･ Stereo Headset with Microphone (Sample)

About manuals of SO-01C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Accessories and main options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Safety Precautions (Always follow these directions) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Handling precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

･ Part names and functions ...................................................... 23

･ UIM ......................................................................................... 24

･ microSD card .........................................................................25

･ Charging ................................................................................ 26

･ Turning power on and off .......................................................30

･ Initial settings (Setup guide) .................................................. 31

･ Status bar ...............................................................................32

Before Using the Handset →P. 2 3

Calling/Network Services

→P. 5 7

･ Notification panel ................................................................... 34

･ Notification LED......................................................................34

･ Basic operations .................................................................... 35

･ Home screen .......................................................................... 38

･ Searching information in the FOMA terminal and web pages

............................................................................................... 42

･ Applications screen ............................................................... 43

･ Character entry ...................................................................... 46

･ Settings of entering characters ..............................................53

･ Settings of Japanese keyboard ............................................. 53

･ Making/Receiving calls ..........................................................57

･ Call log ...................................................................................60

･ Contacts .................................................................................61

･ Network Services ................................................................... 71

Contents/Precautions

Settings →P. 7 9

Mail/Internet →P.105

Multimedia →P.120

File management

→P.144

･ Viewing the setting menu .......................................................79

･ Wireless & networks ...............................................................79

･ Call settings............................................................................86

･ Sound .....................................................................................87

･ Display ................................................................................... 89

･ Location & security.................................................................90

･ Applications ........................................................................... 95

･ Accounts & sync ....................................................................97

･ Privacy..................................................................................100

･ Storage ................................................................................. 101

･ Language & keyboard ......................................................... 102

･ Voice input & output ............................................................. 102

･ Accessibility .........................................................................103

･ Date & time...........................................................................103

･ About phone.........................................................................104

･ Email.....................................................................................105

･ sp-mode mail ....................................................................... 110

･ Using Gmail..........................................................................111

･ Google Talk (Chat) ...............................................................111

･ Message (SMS) .................................................................... 112

･ Using Browser ...................................................................... 114

･ Using the camera ................................................................. 120

･ Playing multimedia content ..................................................133

･ Viewing photos/videos with Gallery ..................................... 134

･ Playing video with YouTube..................................................138

･ Connecting the FOMA terminal to TV to watch photos and

videos...................................................................................139

･ Music player ......................................................................... 140

･ TrackID ................................................................................. 143

･ Handling a file ......................................................................144

･ Transferring and moving data .............................................. 144

･ Using Bluetooth function ......................................................149

･ Sharing files with DLNA devices via Media server .............. 153

Contents/Precautions

Applications →P.154

Overseas use →P.173

Appendix/Index

→P.180

･ Using Android Market ..........................................................154

･ Using DOCOMO Market ...................................................... 154

･ Timescape

･ About location services ........................................................ 159

･ FM radio ...............................................................................165

･ Calendar...............................................................................166

･ Clock/Alarm .......................................................................... 168

･ Evernote ...............................................................................170

･ OfficeSuite ............................................................................ 170

･ Other applications ................................................................ 170

･ Overview of International roaming (WORLD WING) ............ 173

･ Available Services ................................................................ 173

･ Before using .........................................................................174

･ Making/Receiving calls in the country you stay...................178

･ Optional and related devices ............................................... 180

･ Troubleshooting.................................................................... 180

･ Warranty and After Sales Services.......................................185

･ Updating software ................................................................ 188

･ Main specifications .............................................................. 190

･ Specific Absorption Rate of Mobile Phone, etc. .................. 193

･ End User Licence Agreement .............................................. 206

･ About Open Source Software............................................... 207

･ Export Controls and Regulations ......................................... 207

･ Intellectual Property Right ....................................................207

･ Index .................................................................................... 211

........................................................................155

Contents/Precautions

Notes on usage

･ The FOMA terminal does not support

i-mode sites (programs) or i-αppli.

･ The FOMA terminal automatically performs

communication for synchronizing data, checking the latest software version, maintain connection with the server, etc. If you transmit a large amount of data such as downloading applications or watching movie, a packet communication charge becomes high. Subscription of packet flatrate service is highly recommended.

･ This FOMA terminal cannot be used as a

modem.

･ Public mode (Driving mode) is not

supported.

･ Setting the phone to silent mode does not

mute sounds (playback of video or music, alarm, etc.) other than the ring tone, operation sound, and notification sounds.

･ The names of the operators are displayed

when the screen is locked.

･ Your phone number (own number) can be

checked as follows: From the Home screen, press t and tap [Settings] X [About phone] X [Status].

･ The software version of your FOMA

terminal can be checked as follows: From the Home screen, press t and tap [Settings] X [About phone].

･ You can perform software update by

downloading an update file with a PC via Internet and connecting the PC to the FOMA terminal. For details, see "Connecting to a PC and updating" (P.189).

･ By some software updates, the operating

system (OS) may be version-upgraded for improving the FOMA terminal quality. For this reason, you always need to use the latest OS version. And some applications that used in the previous OS version may not be available or some unintended bugs may occur.

･ When using the FOMA terminal inserting

some UIM other than UIM (FOMA card) (white), voice calls and packet communication may not be available in some overseas networks. For using overseas, please visit a docomo Shop near you. DOCOMO exchanges UIM (FOMA card) (green) for UIM (FOMA card) (white) free of charge.

･ Set the screen lock to ensure the security

of your FOMA terminal for its loss. For details, see "Screen lock" (P.93).

Contents/Precautions

Continued on next page

･ If your FOMA terminal is lost, change your

each account password to invalidate authentication using a PC to prevent other persons from using Google services such as Google Talk, Gmail, Android Market, etc., Facebook, Twitter and mixi.

･ The FOMA terminal supports only

sp-mode, mopera U and Business mopera Internet. Other providers are not supported.

Contents/Precautions

Safety Precautions (Always follow these directions)

■ For safe and proper use of the FOMA terminal,

please read the "Safety Precautions" prior to use. Keep the Manual in a safe place for future reference.

■ ALWAYS observe the safety precautions since

they intend to prevent personal injury or property damage.

■ The following symbols indicate the different

levels of injury or damage that may result if the guidelines are not observed and the FOMA terminal is used improperly.

Failure to observe

DANGER

WAR NING

CAUTION

these guidelines may immediately result in death or serious injury.

Failure to observe these guidelines may result in death or serious injury.

Failure to observe these guidelines may result in injury and property damage.

■ The following symbols indicate specific

directions.

Indicates prohibited actions.

Don’t

Indicates not to disassemble.

No disassembly

Indicates not to handle with wet hands.

No wet hands

Indicates not to use where it could get wet.

No liquids

Indicates compulsory actions in accordance with instructions.

Indicates to remove the power plug from the outlet.

Unplug

■ "Safety Precautions" are described in the

following categories:

1. Handling the FOMA terminal, Battery Pack, AC

Adapter cable, and UIM (general).................10

2. Handling the FOMA terminal ........................ 11

3. Handling the Battery Pack ............................13

4. Handling the AC Adapter cable..................... 14

5. Handling the UIM.......................................... 15

6. Handling the FOMA terminal near electronic

medical equipment........................................16

7. Material list ...................................................17

Contents/Precautions

1. Handling the FOMA terminal, Battery Pack, AC Adapter cable, and UIM (general)

DANGER

Do not use, store, or leave the FOMA terminal, battery pack, AC adapter cable, or UIM in a place subject to high temperature such as close to fire, under direct sunlight, or

Don’t

in a car on an extremely hot day.

Doing so may cause fire, burns or injury.

Do not place the FOMA terminal, battery pack, AC adapter cable, or UIM inside cooking appliance such as a microwave oven or high-pressure containers.

Don’t

Doing so may cause fire, burns, injury or electric shock.

Do not disassemble or modify the FOMA terminal, battery pack, AC adapter cable, or UIM.

Doing so may cause fire, burns, injury or

No disassembly

electric shock.

Do not let the FOMA terminal, battery pack, AC adapter cable, or UIM get wet with water, drinking water, urine of pet animals, etc.

Doing so may cause fire, burns, injury or

No liquids

electric shock.

Use the battery pack and AC adapter cable for the FOMA terminal specified by DOCOMO.

Failure to do so may cause fire, burns, injury

or electric shock.

WARNING

Do not subject the FOMA terminal, battery pack, AC adapter cable, or UIM to excessive force or throw it.

Doing so may cause fire, burns, injury or

Don’t

electric shock.

Do not allow the microUSB connection jack, headset connection jack or HDMI connection jack to come in contact with conducting foreign substances (a piece of metal, pencil lead, etc.). Never allow these objects to get

Don’t

into the connection jack.

Doing so may cause fire, burns, injury or electric shock.

Do not cover or wrap the FOMA terminal, battery pack, AC adapter cable, or UIM with a cloth or bedding in use or while charging.

Don’t

Doing so may cause fire or burns.

Power off the FOMA terminal before you step into a place where flammable gas can leak, such as gas stations. Do not charge the battery.

Gas may catch fire.

If you notice anything unusual about the FOMA terminal, battery pack, AC adapter cable, or UIM such as an unusual odor, overheating, discoloration or deformatio n during operation, charging or storage, immediately perform the following measures.

・Remove the power plug from the power

outlet.

・Power off the FOMA terminal. ・Remove the battery pack from the FOMA

terminal.

Failure to do so may cause fire, burns, injury or electric shock.

Contents/Precautions

CAUTION

Do not place on an unstable or inclined platform.

Doing so may cause the device to fall and

Don’t

cause injury.

Do not keep in a place that is very humid, dusty, or subject to high temperature.

Doing so may cause fire, burns or electric

Don’t

shock.

If children use the FOMA terminal, parents or guardians should give them the proper instructions for use. Make sure that they use the FOMA terminal as instructed.

Failure to do so may cause injury.

Keep the FOMA terminal, battery pack, AC adapter cable, or UIM out of the reach of babies and infants.

Failure to do so may cause accidental

swallowing or injury.

Be careful especially when you use the FOMA terminal while it has been continuously connected to the AC adapter cable for a long period of time.

If you play a game etc. while charging for a long time, the temperature of the FOMA terminal, battery pack and AC adapter cable may rise.

If you are directly in contact with hot parts for a long period of time, it may cause your skin to become red, itch, or develop a rash depending on your physical condition and also it may cause low-temperature burn.

2. Handling the FOMA terminal

WARNING

Do not light up the flash/photo light in front of person's eyes since strong light is emitted from the FOMA terminal. Also, do not look straight the light-emitting part when the flash/photo light lights up.

Failure to do so may cause reduce visual

Don’t

acuity. Especially to shoot infants or young children, step away from them more than 1m.

Do not allow a foreign substance such as water and other liquids, metal par ts, or flammables to get in the UIM or microSD card insertion slot on the FOMA terminal.

Don’t

Doing so may cause fire, burns, injury or electric shock.

Do not turn on the light toward a driver of a car etc.

Doing so may disturb driving and cause an

Don’t

accident.

Contents/Precautions

WARNING

Power off the FOMA terminal in a place where the use is prohibited such as in airplane or hospital.

Failure to do so may affect electronic equipment and electronic medical equipment. If you set the automatic poweron function, cancel it before powering off the FOMA terminal. Follow the instructions of each medical facility for the use of mobile phones on their premises.

Prohibited acts such as mobile phone usa ge on board an airplane may be punished by law. If the microUSB cable is connected into the microUSB connection jack for charging etc., the FOMA terminal is automatically powered on. Be careful not to connect the microUSB cable in a place where the use is prohibited such as in airplane or hospital.

Always keep the FOMA terminal away from your ear when you talk setting the hands-free function. Also, when you play game or play back music connecting the Earphone/Microphone, etc. to the FOMA terminal, adjust the volume adequately.

If the volume is too loud, it may cause difficulty in hearing. Moreover, if you barely hear the surrounding sounds, it may cause an accident.

If you have a weak heart, set the vibrator or ringtone volume carefully.

Failure to do so may affect your heart.

WARNING

If you are wearing any electronic medical equipment, check with the relevant medical electronic equipment manu facturer or vendor whether the operation may be affected by radio waves.

The radio waves from the FOMA terminal may affect electronic medical equipment.

Power off the FOMA terminal near electronic devices or equipment operating on high precision control or weak signals.

Failure to do so may interfere with the operation of electronic devices or equipment. * The followin gs are some electronic devices

or equipment that you should be c areful of: Hearing aids, implantable cardiac pacemaker, implantable cardioverter defibrillator, other electronic medical equipment, fire detector, automatic door,

and other automatically controlled devices or equipment. If you use an implantable cardiac pacemaker, implantable cardioverter defibrillator, or other electronic medical equipment, check with the relevant medical electronic equipment manufacturer or vendor whether the operation can be affected by radio waves.

Be careful about broken glasses or exposed internal from the FOMA terminal if the display or the camera lens is broken.

Shatterproof film-applied hardened glass is used on the display surface and the acrylic resin is applied on camera lens so as not to

be shattered when broken. But they may cause injury if you touch a cut surface or exposed portion mistakenly.

Contents/Precautions

CAUTION

Do not swing the FOMA terminal around by holding the strap.

The FOMA terminal may hit you or others

Don’t

and cause accident such as injury.

Do not use damaged FOMA terminal.

Doing so may cause fire, burns, injury or electric shock.

Don’t

If the display is mistakenly damaged and when the liquid crystal runs out, do not get it on your skin such as face, hands, etc.

Doing so may cause blindness or injury on your skin. If the liquid crystal gets in your eye or mouth, rinse with clean running water, and

Don’t

get medical treatment immediately. Also, if it gets on your skin or clothes, use something such as alcohol to wipe off and wash it with soap in clear water.

To use the FOMA terminal in car, check with automobile manufacturer or dealer to determine how the device is affected by radio waves before using.

In rare cases, using the phone in some vehicle models can cause the vehicle's

electronic equipment to malfunction. In that case, stop using the FOMA terminal immediately.

The use of the FOMA terminal may cause itching, rashes, eczema, or other symptoms depending on the user's physical condition. Immediately stop using and get medical treatment in such a case.

For material of each part, see "7. Material list" (P.17).

CAUTION

When watching the display, take a certain distance from the display in a fully bright place.

Failure to do so may reduce visual acuity.

3. Handling the Battery Pack

■ Check the type of the batter y by the label on

the battery pack.

Display Type of Battery

Li-ion 00 Lithium Ion Battery

DANGER

Do not touch the battery pack terminal with a metal object such as a wire. Also, do not carry or keep the battery pack together with metal objects such as a necklace.

Don’t

Doing so may cause battery pack to ignite, explode, overheat or leak.

Check the orientation of battery pack to install it to the FOMA terminal, and do not forcibly attach the battery pack to FOMA terminal if you are having trouble installing it.

Don’t

Doing so may cause battery pack to ignite, explode, overheat or leak.

Do not throw the battery pack into fire.

Doing so may cause battery pack to ignite, explode, overheat or leak.

Don’t

Do not stick a nail into the battery pack, hit it with a hammer, or step on it.

Doing so may cause battery pack to ignite,

Don’t

explode, overheat or leak.

Contents/Precautions

DANGER

If the battery fluid gets into your eyes, do not rub, rinse with clean running water, and get medical treatment immediately.

Failure to do so may cause blindness.

WARNING

If the battery pack seems to have abnormalities such as deformation or scratches due to falling, never use it.

Doing so may cause battery pack to ignite,

Don’t

explode, overheat or leak.

If the battery pack leaks or hears an unusual odor, immediately stop using and move it away from fire.

The leaking liquid may ignite fire, catch fire,

or explode.

Be careful about your pet not to bite the battery pack.

Failure to do so may cause battery pack to

ignite, explode, overheat or leak.

CAUTION

Do not discard the battery pack together with other garbage.

The battery pack may become the source of fire or environmental destruction. Take the used battery pack to our service counter (docomo Shop, etc.) after insulating it by

Don’t

affixing an adhesive tape on the terminal of it or follow the instructions of the local authorities in charge of collecti ng used battery packs.

CAUTION

Do not use or charge the wet battery pack.

Doing so may cause battery pack to ignite, explode, overheat or leak.

Don’t

If fluid etc. leaks out from battery pack, do not make the fluid contact with your skin of face or hands.

Doing so may cause blindness or injury on your skin. If the fluid etc. put into your eyes or mouth, or contacts skin or clothes, immediately

flush the contacted area with clean running water. If the fluid put into the eyes or mouth, immediately see a doctor after flushing.

4. Handling the AC Adapter cable

WARNING

Do not use the microUSB cable if it is damaged.

Doing so may cause fire, burns or electric

Don’t

shock.

Do not use the AC adapter cable in a very humid or steamy place such as bathroom.

Doing so may cause fire, burns or electric

Don’t

shock.

Do not touch the AC adapter cable if you hear thunder.

Doing so may cause electric shock.

Don’t

Contents/Precautions

WARNING

Do not short-circuit the microUSB plug while it is connected to the power outlet. Do not touch the microUSB plug with your hands, fingers, or any part of your body.

Don’t

Doing so may cause fire, burns or electric shock.

Do not place any heavy objects on the microUSB cable.

Doing so may cause fire, burns or electric

Don’t

shock.

When you insert and remove AC adapter from power outlet, do not contact a metal strap or other metal objects with the jack.

Doing so may cause fire, burns or electric

Don’t

shock.

Do not touch the cord of the AC adapter cable or the power outlet with wet hands.

Doing so may cause fire, burns or electric

No wet hands

shock.

Use the adapter only on the specified power supply and voltage. Use the AC adapter cable available overseas when you charge the battery overseas.

Failure to do so may cause fire, burns or electric shock.

AC adapter cable: AC 100 V to 240 V (Make sure to connect the adapter to a household AC power outlet.)

Clean dust from the power plug.

Failure to do so may cause fire, burns or electric shock.

WARNING

When you connect the AC adapter to the power outlet, insert it firmly.

Failure to do so may cause fire, burns or

electric shock.

Hold the power plug, not the microUSB cable, when you remove the AC adapter from the power outlet.

Failure to do so may cause fire, burns or

electric shock.

Remove the power plug from the power outlet when not used for a long period of time.

Unplug

Failure to do so may cause fire, burns or electric shock.

If liquid such as water gets into the adapter, immediately remove it from the power outlet.

Failure to do so may cause fire, burns or

Unplug

electric shock.

Before cleaning, remove the power plug from the power outlet.

Failure to do so may cause fire, burns or

Unplug

electric shock.

5. Handling the UIM

CAUTION

Please be careful not to touch a cut surface when you remove the UIM.

Failure to do so may cause injury.

Contents/Precautions

6. Handling the FOMA terminal near electronic medical equipment

■ The following instructions observe the guidelines of the Electromagnetic Compatibility Conference, Japan to protect electronic medical equipment from radio waves from mobile phones.

WARNING

Please observe the following guidelines in medical facilities.

・Do not take the FOMA terminal into the

operating rooms, ICU (Intensive Care Unit), or CCU (Coronary Care Unit).

・Power off the FOMA terminal inside

hospital wards.

・Power off the FOMA terminal in the lobby

and other places if there are any electronic medical equipment operating in the

vicinity.

・Follow the instructions of each medical

facility when they specify areas forbidding to use and carrying a mobile phone.

・If you set the automatic power-on function,

cancel it before powering off the FOMA terminal.

Power off the FOMA terminal in crowded places such as rush-hour trains. There may be a person with an implantable cardiac pacemaker or implantable cardioverter defibrillator near you.

The radio waves from the FOMA terminal

may affect the operation of implantable cardiac pacemaker or implantable cardioverter defibrillator.

WARNING

If you use an implantable cardiac pacemaker or implantable cardioverter defibrillator, keep the FOMA terminal more than 22 cm away from the implant at all times.

The radio waves from the FOMA terminal

may affect the operation of implantable cardiac pacemaker or implantable cardioverter defibrillator.

If you need to use electronic medical equipment other than implantable cardiac pacemaker or implantable cardioverter defibrillator outside medical facilities such as treating at home, check with the relevant medical electronic equipment manufacturer whether the operation may be affected by

radio waves.

The radio waves from the FOMA terminal may affect the performance of electronic medical equipment.

Contents/Precautions

7. Material list

Part Material

Exterior case (Front)

Proximity sensor PC resin None

Light sensor PC resin None

Notification LED PC resin None

Exterior case (Back, HDMI connector cover)

Hardware key (Back key, Home key, Menu key, Camera key, Volume key, Power key)

Transparent plate (Display)

Transparent plate (Camera lens)

Flash/Photo light PC resin None

Back cover PC resin Non-conductive

PC resin (with glass)

PC resin Non-conductive

Hardened glass

PMMA Hard coating

Surface

treatment

UV coating

Non-conductive vacuum metallization (tin)+UV coating

vacuum metallization (tin)+UV coating

Shatterproof film (PET)

vacuum metallization (tin)+UV coating

Handling precautions

■ Common precautions

･ Do not expose to water.

The FOMA terminal, battery pack, AC Adapter cable, and UIM are not waterproof. Do not use them in a humid place such as bathroom or in the rain. If you carry the FOMA terminal on your body, perspiration may corrode the internal parts of the FOMA terminal and cause malfunction. Note that if a trouble is diagnosed as exposure to water or other liquid, repairs of the FOMA terminal may not be covered by the Warranty or it may not be possible to repair such phones. In that case, even if the FOMA terminal can be repaired, it is repaired at the owner's expense.

･ Clean the FOMA terminal with a dry soft

cloth (such as used for cleaning eyeglasses).

- Do not rub it roughly with a dry cloth. The display may be damaged.

- Drops of water or dirt left on the display may cause stains.

- Do not use alcohol, thinner, benzene, cleaning detergent, etc. to clean the FOMA terminal. These chemicals may erase the printing on the FOMA terminal or cause discoloration.

Contents/Precautions

Continued on next page

･ Clean the terminals occasionally with a

dry cotton swab.

If the jack is soiled, connection gets worse and it may cause power to be turned off or insufficient battery charge, so clean the jack with a dry cotton swab etc. When cleaning, be careful not to damage the terminals.

･ Do not leave the FOMA terminal near the

air conditioning vent.

Extreme temperature changes may produce condensation and corrode the internal parts of the FOMA terminal, causing it to malfunction.

･ Make sure to use the FOMA terminal or

battery pack without excessive force.

If you put the FOMA terminal in a bag full of items or sit down with the FOMA terminal in the pocket of your cloth, it may damage the display, and internal circuit board, and the battery pack and cause the FOMA terminal to malfunction. Also, while the external device is connected to the microUSB connection jack, headset connection jack or HDMI connection jack, it may damage the connector and cause malfunction.

･ Do not rub or scratch the display with

metal.

The display may get scratched and it may cause malfunction or damage.

･ Make sure to see the user's manuals

supplied with the battery pack and AC adapter cable.

■ FOMA terminal precautions

･ Do not press touch panel surface

forcibly, or not operate with a sharppointed objects such as nail, ballpoint pen, pin, etc.

Doing so may cause damage of touch panel.

･ Do not use the FOMA terminal in

extremely hot or cold places.

Use the FOMA terminal within a temperature range of 5°C to 35°C and a humidity range of 45% to 85%.

･ Using the FOMA terminal near ordinary

phone, television or radio may cause interference in these electric appliances. Make sure to move far away from them when using the FOMA terminal.

･ Note down the information saved in the

FOMA terminal in a separate note and keep it safely.

Under no condition will DOCOMO be held liable for any damaged or lost data saved in the FOMA terminal.

･ Do not drop or give a strong impact to

the FOMA terminal.

Doing so may cause malfunction or damage.

･ Do not plug the connector of the external

device into the microUSB connection jack, headset connection jack or HDMI connection jack at the slant or pull it while connecting.

Doing so may cause malfunction or damage.

Contents/Precautions

Continued on next page

･ The FOMA terminal could become warm

while in use and charging. This condition is not abnormal. You can continue charging the battery.

･ Do not leave the camera under direct

sunlight.

If you do so, some of the elements may melt or become faded.

･ Use the FOMA terminal with the HDMI

connection jack cover closed.

Failure to do so may get dust or water inside and cause malfunction.

･ Do not use the FOMA terminal without

the back cover.

Doing so may cause the battery pack fall, malfunction, and damage.

･ Do not remove the microSD card or

power off the FOMA terminal while using the microSD card.

Doing so may cause data loss or malfunction.

･ Do not let magnetic cards, etc. come

close to the FOMA terminal.

The magnetic data in cash cards, credit cards, telephone cards, floppy disks, etc. may be erased.

･ Do not bring strong magnetic objects

close to the FOMA terminal.

Strong magnetic objects may cause misoperation.

■ Battery pack precautions

･ The battery pack is a consumable

accessory.

Even if the operating time of the FOMA terminal varies depending on the operating conditions and other factors, when the length of time you can use the FOMA terminal with a fully char ged battery becomes unusually short, it is time to replace the battery pack. Purchase the battery pack specified in this manual.

･ Charge the battery pack in an

environment with the proper ambient temperature (5°C to 35°C).

･ The operating time of the battery pack

varies depending on the operating environment and the secular degradation level of the battery pack.

･ Depending on the use condition, the

battery pack may be inflated as it comes to the end of its life. This is not a malfunction.

･ Do not store the battery pack in the

following cases:

- The battery is fully charged (immediately after the charging is complete)

- The battery has run out (the phone cannot power on)

The performance and life of the battery pack may deteriorate. It is recommended that you store the batter y pack with the remaining battery level of about 40 percent as a guide.

Contents/Precautions

■ AC adapter cable precautions

･ Charge the battery pack in an

environment with the proper ambient temperature (5°C to 35°C).

･ Do not charge in the following places.

- Places that are very humid, dusty or exposed to strong vibrations.

- Near ordinary phone or TV/radio.

･ The AC adapter cable could become

warm while charging. This condition is not abnormal. You can continue using the FOMA terminal.

･ When you use the power outlet with a

mechanism to prevent the plug from being removed, follow the instructions on the outlet's user's manual.

･ Do not give a strong impact to the

adapter. Also, do not bend or deform the microUSB plug.

Doing so may cause malfunction.

■ UIM precautions

･ Do not use unnecessary force to insert/

remove the UIM.

･ Do not insert and use the UIM with

another IC card reader/writer. Please note that you are wholly liable for any damage or malfunction as a result of such action.

･ Always keep the IC portion clean when

you use the card.

･ Clean the FOMA terminal with a dry soft

cloth (such as used for cleaning eyeglasses).

･ Note down the information saved in the

UIM in a separate note and keep it safely.

Under no condition will DOCOMO be held liable for any damaged or lost data saved in the FOMA terminal.

･ Take an expended UIM to sales outlet

such as docomo Shop for proper disposal in order to protect the environment.

･ Do not carelessly damage, contact, or

short-circuit an IC.

Doing so may cause data loss or malfunction.

･ Do not drop a UIM or subject it to

impact.

Doing so may cause malfunction.

･ Do not bend a UIM or place a heavy

object on it.

Doing so may cause malfunction.

･ Do not insert the UIM on which any label

or seal is stuck into the FOMA terminal.

Doing so may cause malfunction.

Contents/Precautions

■ Bluetooth function precautions

･ To secure the Bluetooth communication

security, the FOMA terminal supports the security function compliant with Bluetooth standards, but the security may not be sufficient depending on the setting. Concern about the communication using the Bluetooth function.

･ Please be aware that DOCOMO is not

responsible for data leak when making data communications using Bluetooth.

･ You can use a headset, handsfree, and

audio profiles on the FOMA terminal. The audio/video remote control may be available for audio profile.

･ Frequency band

The frequency band used by the FOMA terminal's Bluetooth/wireless LAN function is indicated on the battery storage section. The following are the descriptions:

2.4FH1/DS4/OF4

2.4: This radio equipment uses the 2400 MHz

band.

FH/DS/OF: Modulation scheme is the FH-SS,

1: The estimated interference distance is 10 m

4: The estimated interference distance is 40 m

DS-SS, or OFDM system.

or less.

: The full band between 2400 MHz

and 2483.5 MHz is used and the band of the mobile identification

device can be avoided. Available channels vary depending on the country. For use in an aircraft, contact the airline beforehand.

･ Bluetooth cautions

The operating frequency band of this equipment is used by industrial, scientific, consumer and medical equipment including microwave ovens, premises radio stations for identifying mobile units used in the manufacturing lines of plants (radio stations requiring a license), specified low power radio stations (radio stations requiring no license) and amateur radio stations (hereinafte r referred to as "another station").

1. Before using this equipment, confirm that

"another station" is not being operated nearby.

2. In the event of this equipment causing

harmful radio wave interference with "another station", promptly change the operating frequency or stop radio wave emission by turning off the power, etc.

3. If you have further questions, contact

"General Inquiries" on the last page of this manual.

Contents/Precautions

■ Wireless LAN (WLAN) precautions

･ Wireless LAN

Do not use wireless LAN near magnetic devices such as electrical appliances or AV/OA devices, or in radio waves.

- Magnetism or radio waves may increase noises or disable communications (especially when using a microwave oven).

- When used near TV, radio, etc., reception interference may occur, or channels on the TV screen may be disturbed.

- If there are multiple wireless LAN access points nearby and the same channel is used, search may not work correctly.

･ 2.4 GHz device cautions

The operating frequency band of the WLAN device is used by industrial, scientific, consumer and medical equipment including home electric appliances such as microwave ovens, premises radio stations for identifying mobile units used in the manufacturing lines of plants (radio stations requiring a license), specified low power radio stations (radio stations requiring no license) and amateur radio stations (radio stations requiring a license).

1. Before using the device, confirm that

premises radio stations for identifying mobile units, specified low power radio stations and amateur radio stations are not being operated nearby.

2. If the device causes harmful radio interference to premises radio stations for identifying mobile units, immediately change the frequency band or stop use, and contact "General Inquiries" on the last page of this manual for crosstalk avoidance, etc. (e.g. partition setup).

3. If the device causes radio interference to specified low power radio stations or amateur radio stations, contact "General Inquiries" on the last page of this manual.

■ Cautions

･ Do not use altered FOMA terminal.

Using an altered device is a violation of the Radio Law.

A "Technical Conformity Mark " affixed on the manufacturer's specification sticker certifies that the FOMA terminal meets technical regulations for specified radio equipment that are based on the Radio Law. If you remove the screws and alter the inside of the FOMA terminal, the technical regulations conformity certification becomes invalid. Do not use the FOMA terminal with the certification invalid, as it is a violation of the Radio Law.

･ Be careful when using the FOMA

terminal while driving.

Using a handheld mobile phone while driving will result in a penalty. However, absolutely necessary cases such as rescue of a sick person or maintaining public's safety are exempted.

Contents/Precautions

Part names and functions

Before Using the Handset

h i

s t

a Light sensor: Used for auto controlling of the

screen brightness.

b Proximity sensor: Turns on or off the touch screen

to prevent misoperation during a call.

c Ear speaker d Touch screen e Back key f Home key g Menu key h Power key/Screen lock key i HDMI connector (type D) j Flash/Photo light k Camera lens l GPS antenna section* m Headset connector

n Second microphone: Reduces noise to make

easy to listen.

o Microphone p Speaker q Strap hole r FOMA antenna section* s Notification LED t Connector for microUSB cable u Volume key/Zoom key v Camera key

* The antenna is built into the main body. Covering

around the antenna with your hand may affect the quality.

❖Note

･ Do not put stickers etc. on each sensors.

Before Using the Handset

UIM

The UIM is an IC card recorded user information such as your phone number etc. When the UIM is not inserted to the FOMA terminal, you cannot use some functions (phone function, etc.) of the FOMA terminal. ･ In this FOMA terminal, the UIM (blue) is not

available. If you have the UIM (blue), bring it to the nearest docomo Shop to replace.

･ When inserting/removing the UIM, make

sure to power off the FOMA terminal. Do not connect the AC Adapter cable.

■ Security codes of the UIM

The UIM has a Security code, namely PIN. It is set "0000" at the subscription. They can be changed by yourself. (P.93)

Inserting UIM

Put your thumb nail into the

groove, hold it up in the direction of the arrow ( ) to remove the back cover.

Remove the battery pack, and

insert the UIM into the holder with the gold-colored contacts facing down.

･ Check the insert direction (corner cut)

of the UIM.

Holder

UIM

Corner cut

Groove

Before Using the Handset

Removing UIM

Remove the back cover, the battery

pack, and slide the UIM out holding it with your finger.

UIM

microSD card

You can use microSD card for any other compatible devices. ･ When a microSD card is not inserted,

camera functions, playing or downloading music or videos are not available.

･ The FOMA terminal supports microSD card

of up to 2GB, and microSDHC card of up to 32GB (As of March, 2011).

Inserting microSD card

Put your thumb nail into the

groove, hold it up in the direction of the arrow ( ) to remove the back cover.

Insert a microSD card into the

holder with the gold-colored contacts facing down.

Holder

microSD card

Groove

Before Using the Handset

Removing microSD card

Remove the back cover, the battery

pack, and slide the microSD card out with holding it with your finger.

Charging

The battery pack is not full charged when you purchased the FOMA terminal.

Charging time

Charging time is an estimate of the time required to charge a completely empty battery pack. Charging under low temperature requires longer time.

AC Adapter Cable SO02 (included accessory)

Approx. 170 min.

Operation time on full charge (estimate)

The following time varies by the battery condition or operating environment. For the details, see (P.191).

Continuous stand-by time

Continuous call time

FOMA/3G Stationary (Auto):

GSM Approx. 270 hours

FOMA/3G Approx. 340 min.

GSM Approx. 390 min.

Approx. 400 hours Moving (Auto): Approx. 290 hours Moving (3G static): Approx. 360 hours

(stationary)

Battery pack life

Use the battery pack for SO-01C, SO05. ･ The battery pack is a consumable

accessory. The usage duration of the battery per one charge decreases gradually each time the battery is recharged.

･ When the usage duration per one charge

becomes about half of a new battery pack, the life if the battery pack is assumed to be almost over. It is recommended that you replace the battery pack ahead of time. Depending on the usage condition, the battery pack may be inflated as it comes to be end of its life. This is not a malfunction.

Before Using the Handset

Continued on next page

･ Return all spent battery packs to

NTT DOCOMO or a dealer, or a recycling shop to protect the environment.

Li-ion 00

Charging

･ The included AC adapter's power plug is

compatible with AC100V to 240V. For using the FOMA terminal overseas, a plug adapter that fits the electrical outlets in the country you stay is needed. Do not use an electrical transformer for overseas use to charge the FOMA terminal.

･ Use the included AC Adapter cable for

charging.

･ When charging starts, the notification LED

turns on in red/orange/green. Green means the remaining battery level reaches more than 90%. To check the battery level, press t from the Home screen, then tap [Settings] X [About phone] X [Status] and check "Battery level". When charging is completed, "100%" is displayed in the battery level.

･ When you start charging the battery with the

FOMA terminal powered off, the power turns on. However, you cannot operate the FOMA terminal. Do not charge the battery in a place where the use is prohibited such as in airplane or hospital.

Do not charge the battery pack for a long time (several days)

･ If you remain charging the FOMA terminal

for a long time, the power supply starts from the battery pack after completion of charging. The usage time duration may be short. In that case, please charge it again correctly. For recharging, remove the FOMA terminal from the AC Adapter cable and reconnect it again.

Attaching the battery pack

Put your thumb nail into the

groove, hold it up in the direction of the arrow ( ) to remove the back cover.

Groove

Before Using the Handset

Continued on next page

Insert it in the direction of an arrow

( ) with "Sony Ericsson" label facing up, joining the each tab of the FOMA terminal and the battery pack.

Tab

Battery pack

Check the direction of the battery

pack and attach to the terminal body ( ), press each tab to close it firmly ( ).

Removing the battery pack

Remove the back cover, put your

thumb nail into the groove of the FOMA terminal, hold the battery pack up in the direction of the arrow ( ) to remove.

Groove

❖Information

･ When attaching/removing the battery pack, make

sure to power off the FOMA terminal.

Charging with the AC Adapter

Insert the supplied microUSB

cable horizontally with the microUSB plug engraved side facing up into the connector for USB cable of the FOMA terminal.

Before Using the Handset

Continued on next page

Insert the microUSB cable

horizontally with the USB plug engraved side facing up into the connector for USB of the AC Adapter, and insert the AC Adapter plug to the power outlet.

When the charging is completed,

remove the microUSB plug of the microUSB cable from the FOMA terminal.

Remove the AC Adapter from the

power outlet.

❖Note

･ If the microUSB cable is connected into the

connector for external devices for charging etc, the FOMA terminal is automatically powered on. Be careful not to connect the microUSB cable in a place where the use is prohibited such as in airplane or hospital.

Charging with a PC

Insert the microUSB cable

horizontally with the microUSB plug engraved side facing up into the connector for USB cable of the FOMA terminal.

Insert the USB plug of the

microUSB cable into the USB port of a PC.

･ When "PC Companion software"

screen appears on the FOMA terminal, tap [Skip].

･ When a screen for new hardware

detection etc. appears on the PC, select [Cancel].

When the charging is completed,

remove the microUSB plug of the microUSB cable from the FOMA terminal.

Remove the USB plug of the

microUSB cable from the USB port of the PC.

❖Note

･ If the microUSB cable is connected into the USB

connection jack for charging etc, the FOMA terminal is automatically powered on although the operations are not available. Be careful not to connect the microUSB cable in a place where the use is prohibited such as in airplane or hospital.

･ Check the connecting direction to connect

correctly. Wrong connection may cause damage.

Before Using the Handset

Continued on next page

microUSB plug

Notification LED

AC adapter

USB plug

microUSB cable

Turning power on and off

Turning power on

Press p for over a second.

･ The key lock screen appears.

Deactivate the key lock.

･ For deactivating the key lock, see

"Unlocking the keys" (P.31).

❖Information

･ The first time you turn ON, "Setup guide" (P.31)

appears.

･ If you activate the screen lock or SIM card lock, a

PIN code entry screen appears when turning power on. Enter the PIN code and tap [OK]. To correct the wrong PIN entry, tap / .

Turning power off

Press p for over a second.

･ Phone options menu appears.

Tap [Power off].

Tap [OK].

Setting Key lock

When the key lock is set, the screen light turns off. You can avoid the touch screen or button from false operations. ･ The FOMA terminal keys are locked with

turning the screen light off after the specified time duration.

Press p.

Before Using the Handset

Continued on next page

❖Information

･ For details on settings for turning the backlight off

and the duration of time before the key lock activation, see "Adjusting the idle time before the screen turns off" (P.90).

･ There is no function to deactivate the key lock. ･ If you set the screen lock, entering the pattern, PIN

or password is needed before the screen unlock. For details on the screen lock settings, see "Screen lock" (P.93).

Unlocking the keys

A key unlocking screen appears when turning the power on or the backlight on by pressing p/y.

Touch and drag to until

it laps over.

Key lo ck

❖Information

･ appears on the right until you touch . You

can switch the ringtone ON/OFF without unlocking the keys and screen by touching and dragging to the left.

Initial settings (Setup guide)

When you turn on the FOMA terminal for the first time, Setup guide appears to import contacts saved in the UIM and the microSD card and make settings of language, date and time, etc.

❖Information

･ Even if you skip Setup guide, you can set or

change the items later as required. To change the settings later, from the Home screen, press , then tap [Settings] or [Setup guide] to set up from the menu.

Press p for over a second.

･ A screen for selecting language

appears.

Tap [English (United States)] X

[次へ (Next)].

･ "Welcome Learn how to use the phone

with this easy guide" appears. You can check the operations of main functions and initial settings.

Tap [ N ext] .

･ Tap [Change] to change Date & time

(P.103).

Tap [ N ext] .

･ Tap [View] to check how to use the

keyboard.

Before Using the Handset

Continued on next page

Tap [ N ext] .

･ Tap [View] to check how to use the

application Timescape.

Tap [ N ext] .

･ Tap [Import] X [Yes] to import

contacts in SIM.

･ Tap [Set up] to make settings of

Wireless network (P.82), Google account (P.97), Email (P.105) and Timescape (P.155).

Tap [ N ext] X [Finish].

The Home screen appears.

❖Information

･ To set the online service settings, enabling data

connection (3G/GPRS) is required. For checking the data connection status, see "Status icons" (P.32).

Status bar

A status bar appears at the top of the screen. In the status bar, the FOMA terminal status and notification are displayed. Notification icons appear on the left side, and the FOMA terminal status icons appear on the right side of the status bar.

❖Note

･ If you cancel the status bar forcibly (P.96),

operations may not be performed correctly.

Status icons

The status icons displayed on the screen are as follows.

Signal strength Connecting to

During International roaming

No signal During Data

FOMA HIGHSPEED available

Sending and downloading via FOMA HIGHSPEED

GPRS available Sound OFF

Sending and downloading GPRS data

3G available Microphone is set

Sending and downloading 3G data

Connecting to Wi-Fi Battery status

Bluetooth device

GPS function is activated

synchronization

Airplane mode is activated

Silent mode (vibration) ON

(Ringtone volume 0)

Speakerphone on

to mute

An alarm is set

Statusbar

Before Using the Handset

Continued on next page

Wi-Fi open network available

The Bluetooth function is ON.

The battery is charging

UIM is locked or not inserted.

Notification icons

The notification icons displayed on the screen are as follows.

New email message

New Gmail message

New SMS message Upcoming calendar

Problem with SMS message delivery

New instant message

New Facebook message

Uploading data to Facebook

Uploading data to Facebook completed

Receiving/ Downloading data

Sending/Uploading data

Data connected via Bluetooth

Missed call

New voice mail

event

Playing a track

FM radio in use

USB is connected

HDMI connected

Data communication invalid

Connecting to a VPN

Not connected to a VPN

Media server activated

Installation is completed (when installing applications from Android Market, etc).

Software update notification or updating software

Update notification (when update of the installed market application is notified)

Calling Problem with

Calling with Bluetooth device

Call on hold More (undisplayed)

Before Using the Handset

Media server connection notification

Client device is connected to Media server

Red: Error messages Yellow: Warning messages

sign-in/sync

Setup guide unchecked

notifications

Notification panel

Notification icons are displayed in the Notification panel. You can open notifications, such as messages, remainders, or event notifications directly from the Notification panel.

Clearing the Notification panel

From the Notification panel, tap

[Clear].

❖Information

･ Some notifications cannot be cleared.

Opening/Closing the Notification panel

Notification panel

Drag the status bar downwards.

･ Press x to close the Notification

panel.

Notification LED

Notification LED provides information on the FOMA terminal status, incoming/receiving, etc.

LED status

Status Indication

Red The battery is charging when

Flashing red The battery level is not enough

Green The battery is charging when

Flashing green Missed calls, incoming

Orange The battery is charging when

the remaining battery level is less than 10 %.

for activating the FOMA terminal for turning ON.

the remaining battery level is more than 90 %.

messages (SMS) or emails exist.

the remaining battery level is 10 % - 90 %.

Before Using the Handset

Basic operations

* In this manual, each key operation is described with

x, y, t.

Basic hardware key operation

x Back ･ Go back to the previous

y Home ･ Go to the Home screen.

t Menu ･ Open a list of options available

screen. Or close a dialog box, an options menu, or the Notifications panel.

･ Close the software keyboard.

･ Press and hold down for over

a second to open the recently used applications window.

in the current screen or application.

･ Press and hold down for over

a second when entering characters switches display/ not display the software keyboard.

･ From the Home screen, press

and hold down for over a second to display the keyboard. Tap any key to start Google Search.

Using the touch screen

Precautions on using touch screen

･ Touch screen is designed for being touched

lightly with fingers. Do not push it forcibly with a finger or press it with sharp objects (nail, ballpoint pen, pin, etc.).

･ Touching the touch screen may not work in

the following cases. Note that it may cause malfunction.

- Operation with gloved hands

- Operation with tip of fingernail

- Operation with foreign object on the screen

- Operation with protective sheet or seal on the screen

Before Using the Handset

Operations on the touch screen

■ Ta p

Touch an item such as icon or menu with your finger lightly and release it. ･ Double-tap means tapping twice

quickly.

■ Touch

Touch and hold an icon or menu item long.

■ Flick

Stroke the screen with your finger lightly and flick up/down/left/right. Flick operation is used to switch or scroll the screen.

■ Drag

Touch the screen, drag to the desired position and release the finger.

■ Pinch

Touch the screen with two fingers and widen (pinch-out) or narrow (pinch-in) the fingers' distance. On some screens, pinch-out to zoom in and pinch-in to zoom out.

❖Information

･ You can zoom in or out also by double-tapping or

by tapping the zoom control icons ( /

). The zoom control icons may appear when

you drag in any direction on the screen.

Before Using the Handset

Selecting items quickly from a list

Some lists have Japanese syllabary and alphabetic index on the right side of the screen. ･ Drag your finger along the index to scroll

through the list.

･ Tap the index character to move on the list.

Marking or unmarking options

You can switch ON/OFF of the option settings by marking or unmarking the checkboxes or radio buttons. ･ To switch ON/OFF of the option setting, tap

the checkbox or radio button.

■ Checkboxes

Marked

Unmarked

■ Radio buttons

Marked

Unmarked

Before Using the Handset

Home screen

The Home screen is the starting point of the FOMA terminal. You can personalize the Home screen by adding or moving, for example, application shortcuts and widgets, or changing the wallpaper. The Home screen can be extended with two screens for the left and right.

eb f g h

da c i

a Widget: Status switch b Wallpaper c Shortcuts (applications) d Widget: Google search (P.42) e Home screen position f Widget: Timescape g Widget: Music player h Widget: Photos and videos i Widget: TrackID j Media folder (Gallery, Music and FM radio) k Application button l Widget: Media shortcuts

j c

c k c l

Before Using the Handset

Switching the Home screen

Flick the Home screen to left or

right.

･ The Home screen switches.

❖Information

･ You can check the current position of the Home

screen with at the top of the screen.

Changing the Home screen

From the Home screen, press

Tap [Add].

･ "Add to home screen" menu appears

to change the Home screen.

■ Add to home screen

Shortcuts Add shortcuts of applications or

Widgets Add widgets. (P.39)

Folder Add folders to collect shortcuts,

Wallpapers Change the wallpaper. (P.41)

setting screens. (P.39)

etc. (P.40)

❖Information

･ "Add to home screen" appears also by touching

and holding anywhere on the Home screen without icons.

Adding a shortcut on the Home screen

In "Add to home screen" menu, tap

[Shortcuts].

Select a shortcut you want to add.

･ The shortcut appears on the Home

screen.

❖Information

･ You can add shortcuts of applications on the Home

screen also by the follow ing operation.

- From the Home screen, tap , touch and hold down an icon until the Home screen appears and release the finger where you want to place the shortcut.

Adding widgets

In "Add to home screen" menu, tap

[Widgets].

･ A list of widgets appears.

Analogue clock

Calendar Display the calendar.

Data traffic Switch ON/OFF of data

Digital clock Display the digital clock.

Facebook View comments of members.

Google Search Display the Quick search box.

Home screen tips

Display the analog clock.

communication.

Display tips of the Home screen operation.

Before Using the Handset

Continued on next page

Latitude View locations of members.

Market Display recommended

Media shortcuts

Music player Display Music player.

News & Weath er

Photos and videos

Picture frame Crop the shot photo to display on

Power Control Display the setting buttons for

Rate Places Display information of nearby

Status switch Display the setting buttons for

TimescapeTM widget

TrackID

YouTube Display the list of frequently played

Select an item.

applications of Android Market.

Display Music player and Gallery (photos, videos).

Display news and weather.

Display shot photos and videos.

the Home screen.

turning on Wi-Fi function

, the GPS function, synchronization and brightness (switch).

stores or post word of mouth.

turning on Airplane mode, Bluetooth function, the GPS function, Wi-Fi, and for switching speakerphone ON, vibrate, and Mobile network settings.

Display the latest Timescape tile.

Display TrackIDTM.

movies and recommended.

function

, Bluetooth

❖Information

･ If you install an application with widget from

Android Market, the installed widget is added to the widget list.

Displaying widget on the Home screen by a list

From the Home screen, pinch-in.

･ A list of the widgets on the Home

screen appears.

❖Information

･ To return to the Home screen, pinch-out or tap [Exit

overview].

Adding a folder to the Home screen

In "Add to home screen" menu, tap

[Folder].

Select the folder icon you want to

add.

･ To change the folder name, tap

[Create new folder] entry box.

Tap [ D o ne].

･ The folder appears on the Home

screen.

Before Using the Handset

Adding items to a folder

From the Home screen, touch and

hold a shortcut icon until the FOMA terminal vibrates.

Drag the shortcut icon over to the

folder.

Release your finger from the icon.

･ The shortcut is added in a folder.

Renaming a folder

Tap the folder to open it.

Touch and hold the title bar of the

folder.

･ A dialog box for changing folder

settings appears.

Tap entry box of [Folder name] and

enter a folder name, and tap [Done].

･ To change the folder icon, tap a folder

from [Select folder icon].

Changing wallpaper

In "Add to home screen" menu, tap

[Wallpapers].

Tap[Gallery]/[Live wallpapers]/

[Sony Ericsson wallpapers].

･ When you tap [Gallery], select an

image to set to the wallpaper, pinch the cropping frame or drag it to area you want to use as wallpaper, and tap [Save].

･ When you tap [Live wallpapers],

select a content, tap [Set wallpaper]. You can also download and add Live wallpaper content from a web page.

･ When you tap [Sony Ericsson

wallpapers], select an image to set to the wallpaper, tap [Select wallpaper].

❖Information

･ From the Home screen, you can also press t

and tap [Wallpaper].

Moving an icon on the Home screen

From the Home screen, touch and

hold an icon until the FOMA terminal vibrates.

Keep touching the icon and drag it.

･ To move to another Home screen,

keep touching the icon and drag to left or right.

Release your finger from the icon.

Before Using the Handset

Deleting an icon from the Home screen

From the Home screen, touch and

hold an icon until appears at the bottom of the screen.

Drag the icon to .

･ The icon lights up in red.

Release your finger from the icon.

Searching information in the FOMA terminal and web pages

Enter a word in the search box to browse the information in the FOMA terminal or on the Internet.

Tap the search box (P.38) on the

top of the browser screen.

･ The software keyboard appears.

Enter a search word.

･ Search suggestions appear as you

enter a character.

･ For character entry, see "Character

entry" (P.46).

Tap a search item or .

･ To enter a search word again, press

❖Information

･ Tap to set the search range from "All", "Web"

and "Apps".

･ Tap to enter a search word by voice to browse

the Internet.

Search settings

You can set search engines to use for Quick search box or set search objectives in the FOMA terminal.

From the Home screen, tap ,

then tap [Google Search]. Press t, then tap [Search

settings].

･ A search settings screen appears.

You can set the following items.

Google search You can set whether to display

search options when a search word is entered, or whether to reflect the previous search result in the search options. You can also open the web search log settings page by Browser. ･ You need to create your

Google account.

Before Using the Handset

Continued on next page

Searchable items

Clear shortcuts You can set not to display

You can change the search range by marking/unmarking data categories (web, application, contacts selection list, music search) in the FOMA terminal to search.

recently selected search results.

Applications screen

You can access the applications installed in the FOMA terminal using the Applications screen.

Displaying applications screen

Applicationbutton

From the Home screen, tap .

･ On the Applications screen, flick left

or right to switch the Applications screen.

❖Information

･ To close the Applications screen, tap or press

x or y .

Applications

The applications displayed on the Applications screen by default are as follows.

Icon Application Description

docomo market Quick access to the

BeeTV Watch programs for

E★エブリスタ (E★eburista)

BOOK ストア 2Dfacto (Book store 2Dfacto)

PlayNow Browse a variety of

Contacts Keep contacts of your

Phone Make and receive

Messaging Send and receive

Browser Browse Web and

DOCOMO recommended web pages or convenient applications.

mobile phone after log in.

View electronic books.

View electronic books

benefic information.

friends and colleagues.

calls, and switch between calls.

message (SMS).

WAP sites (except for WML) and download files.

Before Using the Handset

Continued on next page

Icon Application Description

Timescape

Keep track of all daily communication and media events.

Settings Make the FOMA

terminal settings.

Setup guide Display Setup guide.

Music Play music.

Gallery View photos and

videos.

Clock Set an alarm, clock,

Email Send and receive

etc.

emails (multiple accounts are also available).

Market Download and buy

Calendar Keep track of your

new applications.

schedule.

Maps View current location,

find another locations and calculate routes.

Gmail Email application

Talk Chat on Google Talk.

Navigation Display Google Map.

Places The application using

information registered on Google Map

Icon Application Description

Latitude A communication tool

to share and use your location information with members

Calculator Perform basic

calculations such as addition, subtraction, multiplication, and division.

YouTube Share and view

videos from all over the world.

Evernote The application for

managing private online files

spモードメール (sp-mode mail)

定型文 (Fixed phrase)

Instruction Manual

News & Weather Display news and

Email application

Manage phrases to quote when entering characters.

Display the FOMA terminal instruction manual.

weather.

Downloads Display a list of

downloaded items.

PhoneBookCopy Copy contacts data to

the other FOMA terminal.

Before Using the Handset

Continued on next page

Icon Application Description

Phonebook backup

OfficeSuite Browse and read text

TrackID

Google Search Search information in

Voice Search Search by voice.

Media server Set up and manage

Startup Guide Supports basic

FM radio Listen to FM radio.

ToruCa Download store

Camera Take photos and

Campaign Navi View campaig n

mora touch mora touch, the music

Facebook Sign in to Facebook.

Alarms Set alarm clock.

Back up contacts data

documents.

Music information confirmation service

the FOMA terminal and web pages.

Media server.

operation and initial settings of docomo smartphone.

information or coupon from a portal website.

record video cl ips.

information for Xperia.

download site

Icon Application Description

life.episode

View the latest information such as news or music.

❖Information

･ Some application names may not be displayed

fully.

Sorting applications

You can sort the applications displayed on the Applications screen from the "Sorting" menu.

On the Applications screen, tap

･ "Sorting" menu appears.

Custom sorting Select an application icon to

Alphabetical Sort in alphabetical order.

Most used Sort in frequency order.

Recently installed Sort in install date order.

sort. (P.46)

Before Using the Handset

Selecting an application to move

On the Applications screen, tap

, then drag an application icon

you want to move .

･ If does not appear on the

Applications screen, select "Custom sorting" from the "Sorting" menu (P.45).

Release your finger from the

application icon.

･ The application icon moves.

Tap .

❖Information

･ To move icons to another Applications screen,

drag the icon to the side edge of the screen.

･ To add the Applications screen, drag the icon to

the rightmost screen.

Opening the recently used applications window

You can view and access recently used applications from this window.

Press y for over a second.

･ A recently used applications appear

on a list.

Character entry

To enter characters, use the software keyboard which appears when you tap the character input box in a message, contacts, etc.

❖Information

･ Press x to return to the previous screen from

the character entry screen.

Selecting input method

In this FOMA terminal, you can select Input method (keyboard type) from "Chinese keyboard", "Japanese keyboard" and "Default input".

Chinese keyboard

Default input

Japanese keyboard

On a character entry screen, touch

and hold the text box.

Tap [Input method] X [Chinese

keyboard]/[Default input]/ [Japanese keyboard].

Select to enter Chinese.

Select a language for text entry. Select to enter language other than Japanese.

Select to enter Japanese.

Before Using the Handset

Continued on next page

❖Information

･ You can change Input method (keyboard type)

during character entry.

Software keyboard

For Japanese keyboard, there are two types of software keyboards: QWERTY and numeric key.

❖Information

･ The key display of software keyboard varies

depending on the entry screen, character mode or settings.

■ QWERTY software keyboard

Japanese characters can be entered in "Romaji input" mode.

Por trai t

Landscape

■ Numeric software keyboard

Japanese characters can be entered in "Kana input" mode.

Por trai t

Landscape

Switching the keyboard

On the character entry screen,

touch and hold the character mode icon .

Tap / .

･ : The numeric software keyboard

appears.

･ : The QWERTY software keyboard

appears.

❖Information

･ The QWERTY software keyboard is set by default.

Also, "Popup on key press", "Auto capitalization", "Word suggestion" and "Error correction" are set to on.

Before Using the Handset

Entering characters on the QWERTY software keyboard

Use the QWERTY software keyboard to enter Japanese characters in "Romaji input" mode.

The main functions of the touchkeys

･ To change character modes and other input

operations, tap the following icons on the QWERTY software keyboard.

Icon Function

/ Each time you tap, the character mode

switches "Number" → "Hiragana/Kanji → "Alphabet" in order. あ: Hiragana/Kanji

Aa: one-byte alphabet/Ａ: two-byte alphabet 12: one-byte number/１ : two-byte number

Display a character mode switch

Touch and hold

window.

Keyboard switch: / Character mode switch:

(two-byte), (one-byte)

Each time you tap this icon, a list of pictograms (only for sp mode mail) one-byte symbols, two-byte symbols and smileys can be switched.

A list of plug-in applications appears and you can activate the plug-in application.

Icon Function

Enter punctuation marks such as ? and !. Flick from side to side and enter a space, ・, 〜, …, 「, 」, (, and ).

Move the cursor*1 to the left. Touch and hold to move continuously. Or change the range for conversion.

Move the cursor*1 to the right. Touch and hold to move continuously. Or change the range for conversion. When there is an unfixed character string with the cursor at the right end, tap to enter the same character as the one at the end.

*2Fix input characters and converted

characters. When characters are already fixed, enter a line feed at the cursor position.

Delete the character before the cursor. Touch and hold to delete characters continuously.

Appears in Japanese (Romaji) input mode. Make settings of "Change settings" and "Input Method".

Appears before conversion is fixed. Tap to switch conversion methods to "直変換 ".

In alphanumerics input mode, tap to switch upper case and lower case. In number input mode, tap to switch symbols possible to enter with the keyboard.

Before Using the Handset

Continued on next page

*1 When any characters are entered, just touch the

desired position on the entered character string to move the cursor.

*2 On some screens such as the search box or mail

account registration screen, "Next", "Done", "Go", etc. appear.

Changing display keys

･ For Japanese input, you can set not to

display less-frequent-used keys (Q, X, C, etc.) on the QWERTY software keyboard.

When entering characters with

QWERTY software keyboard, tap

Tap [Change settings] X [Select

display keys].

Changing symbols

･ You can change symbols (12) displayed in

(Symbol assistant area) to the ones

you use frequently.

When entering characters with

QWERTY software keyboard, tap

Tap [Change settings] X [Change

symbols].

･ A list of 12 symbols to be displayed

on QWERTY software keyboard appears.

Unmark the checkbox of the key

you want to hide.

Tap [OK].

Tap a symbol you want to change

and delete character previously set, then enter a character to display.

Tap [OK].

Before Using the Handset

Selecting an assistant keyboard

When you enter in Hiragana/Kanji input mode using the QWERTY software keyboard, you can change the assistant keyboard to make the frequent using keys to be displayed widely for easy tapping.

When entering characters with

QWERTY software keyboard, tap

Tap [Change settings] X [Choose

key type].

Tap any of [Static key resizing]/

[Key highlight while typing]/ [Dynamic key resizing with highlight]/[Off].

■ Static key resizing

Widen frequent using key for easy tapping.

■ Key highlight while typing

Widen frequent using key and highlight the key that is predicted for the next entry.

■ Dynamic key resizing with highlight

Widen the key that is predicted for the next entry much further and highlight it.

■ Off

Display equally the width of each key.

Before Using the Handset

Entering characters on the numeric software keyboard

Use the numeric software keyboard to enter Japanese characters in "Kana input" mode.

The main functions of the touchkeys

･ To change character modes and other

entering operations, tap the following icons on the numeric software keyboard.

Icon Function

Each time you tap, the character mode

switches "Number" → "Hiragana/Kanji → "Alphabet" in order. あ: Hiragana/Kanji

Aa: one-byte alphabet/Ａ: two-byte alphabet 12: one-byte number/１ : two-byte number

Display a character mode switch

Touch and hold

window.

Keyboard switch: / Character mode switch:

(two-byte), (one-byte)

Each time you tap this icon, a list of pictograms (only for sp-mode mail) one-byte symbols, two-byte symbols and smileys can be switched.

A list of plug-in applications appears and you can activate the plug-in application.

Icon Function

Appears before conversion is fixed to switch conversion methods ("予測変換 ", " 直変換 ").

Display the previous character (opposite order).

Appears before conversion is fixed to return to text before conversion.

Move the cursor*1 to the left. Touch and hold to move continuously. Or change the range for conversion.

*2Fix entered or converted characters.

When characters are already fixed, enter a line feed at the cursor position.

Delete the character before the cursor. Touch and hold to delete characters continuously.

Display the first candidate of direct conversion. When any character is entered, a space can be entered.

*1 When any characters are entered, just touch the

desired position on the entered character string to move the cursor.

*2 On some screens such as the search box or mail

account registration screen, "Next", "Done", "Go", etc. appear.

Before Using the Handset

Settings of key entry

■ Flick input

Flick up/down/left/right to enter characters in each column of kana syllabary.

･ Ex: Entering characters in "な "

column

You can enter "な" only by touching. Flick left for "に ", up for "ぬ", right for " ね " and down for " の ".

Flick up

Flick left

To uc h

ぬ

ねにのな

Flick right

b Tap [Language & keyboard] →

[Japanese keyboard].

c Unmark the checkbox of "Flick

input".

■ Toggle entry

Tap the same key continuously to enter the assigned character. To enter characters assigned to the same key continuously, operate the followings.

･ Ex: To enter "あお "

a Tap " あ" once. b Tap , and tap " あ " 5 times.

･ Ex: To enter "ca"

a Tap "ABC" 3 times. b Tap , and tap "ABC" once.

❖Information

･ When a certain time is passed after the key

tapped, the tapped key's highlighter goes off and you can enter a character assigned to the same key consecutively without tapping .

Flick down

･ To switch upper/lower case or change to

voiced sound, tap .

･ Flick input is available by default. You

can cancel by the following operation beforehand. a From the Home screen, press

and tap [Settings].

･ To switch upper/lower case or change to

voiced sound, tap .

･ Operate the following to enter

characters in the toggle entry while Flick input is set. a From the Home screen, press

and tap [Settings].

b Tap [Language & keyboard] →

[Japanese keyboard].

c Mark [Multitap text input] checkbox.

Before Using the Handset

Editing text

While entering characters, touch and hold the text box to display the "Edit text" menu and edit entered text.

Select word Drag the slider to select a part of

Select all Select all entered text.

Input method P. 4 6

Add "xx" to dictionary

Cut Display when "Select word"/"Select

Copy Display when "Select word"/"Select

Paste Display when "Cut"/"Copy" is

entered text.

Add the entered text to the dictionary.

all" is selected. Cut the text selected by "Select word"/"Select all".

all" is selected. Copy the text selected by "Select word"/"Select all".

selected. Paste the cut/copied text by "Cut"/"Copy".

Settings of entering characters

For each type of keyboard, you can make settings related to character entry.

From the Home screen, press

t, then tap [Settings] X [Language & keyboard].

Tap [Default input]/[Japanese

keyboard]/[Chinese keyboard].

･ The settings screen for each

keyboard appears. Tap an item displayed on the screen to set.

❖Information

･ The items vary depending on the keyboard type. ･ The setting screen for "Chinese keyboard" is

displayed in English. When Select language (P.102) set to Chinese (中文 ), it appears in Chinese.

Settings of Japanese keyboard

12 key keyboard settings

You can make keyboard settings such as Key sound, Vibrate, etc.

From the Home screen, press t

and tap [Settings] X [Language & keyboard] X [Japanese keyboard].

･ The setting screen for Japanese

keyboard appears. Tap [12 key keyboard settings] to set the items.

Key sound Set whether to sound at the

Vibrate Set whether to vibrate at the

time of key tapping.

Before Using the Handset

Continued on next page

Popup on key press

Auto capitalization

Keep keyboard type

Set to popup the key you have tapped at the time of key tapping.

Set to capitalize automatically the top letter you enter in English input mode.

Set to stabilize the last status of keyboard by screen orientation and kana/alphabet/number input mode.

Keyboard skin

You can change keyboard skin.

From the Home screen, press

t, then tap [Settings] X [Language & keyboard].

Tap [Japanese keyboard] X [Select

keyboard skin].

Select a keyboard and tap [Set

skin].

❖Information

･ You can also download and add keyboard skins

from a website.

Word suggestion

The Word suggestion function shows predicted conversion candidates when you enter Japanese/English characters. Mark the checkbox of Word suggestion checkbox to set options "Error correction" and "Auto space" These options help you entering characters with ease.

Setting Word suggestion

From the Home screen, press

t, then tap [Settings] X [Language & keyboard].

Tap [Japanese keyboard].

Mark [Word suggestion] checkbox.

Setting Error correction

･ Error correction corrects mistyped

characters and shows conversion candidates before conversion in one-byte alphabet input mode when entering characters with QWERTY software keyboard.

From the Home screen, press

t, then tap [Settings] X [Language & keyboard].

Tap [Japanese keyboard].

Before Using the Handset

Continued on next page

Mark [Error correction] checkbox.

Setting Auto space

･ When selecting English word suggestion,

Auto space enters a space next to the entered character. However, space is not entered automatically in the mail address or URL input fields.

From the Home screen, press

t, then tap [Settings] X [Language & keyboard].

Tap [Japanese keyboard].

Mark [Auto space] checkbox.

User dictionary

To display the word as the preferred candidate when entering characters, set the user dictionary beforehand.

Registering words in user dictionaries

There are two types of user dictionaries: "My words Japanese" (Kana/Kanji) and "My words English" (one-byte alphabet).

From the Home screen, press

t, then tap [Settings] X [Language & keyboard].

Tap [Japanese keyboard].

Tap [My words Japanese]/[My

words English]. Press t, then tap [Add].

Tap the character input box for

"Reading" and fill it out, then tap [次へ (Next)].

Enter a word in the input box for

"Word" and tap [完了 (Done)].

Tap [ S ave] .

Setting Words by learning

From the Home screen, press

t, then tap [Settings] X [Language & keyboard].

Tap [Japanese keyboard] X [Words

by learning].

Mark [Save word while typing].

･ To reset all learning, tap "Delete saved

words" X [OK].

Before Using the Handset

Using plug-in application "定型文 (Fixed phrase)"

You can quote phrases with the plug-in application "定型文 ". To call up "定型文 ", touch and hold down / when entering characters. Phrases are saved in 5 categories of "インターネット (Internet)", "あいさつ (Greeting)", "ビジネス (Business)", "返事 (Reply)", " プライベート (Private)" in advance. You can add, delete and edit categories and phrases.

Adding a category of phrases

Add a new category and register a phrase.

From the Home screen, tap ,

then tap [ 定型文 (Fixed phrase)].

A list of categories appears.

Press t, then tap [カテゴリー追

加 (Add category)].

Enter the category name and tap

[OK].

Tap [ 新規追加 (Add phrase)] and

enter a phrase.

Tap [OK].

❖Information

･ When you tap each category, a list of registered

phrases appears. Tap a phrase to edit/delete.

･ To restore the default phrases, in the category list,

press t, then tap [初期化 (Reset)].

Adding a plug-in application

You can install and add plug-in applications to use when entering characters.

From the Home screen, press

t, then tap [Settings] X [Language & keyboard].

Tap [Japanese keyboard] X

[Manage applications].

On the Info screen, tap [OK].

The plug-in setting screen appears.

Tap [Download new applications].

Tap an application and follow the

onscreen instructions.

❖Information

･ Marked plug-in applications in the plug-in setting

screen can be activated in the character entry screen.

Before Using the Handset

Making/Receiving calls

Calling/Network Services

Making a call

From the Home screen, tap

[Phone].

Enter the number of the recipient

and tap [Call].

･ If a wrong number is entered, tap

on the right of the phone number field to delete the number.

Entering pause (,)

This function allows you to operate voice mail at home, to reserve tickets or to check the balance of a bank account, etc.

From the Home screen, tap

[Phone].

Enter the number of the recipient

and touch and hold the asterisk (*) key until a comma (,) appears.

Making an emergency call

When the FOMA terminal is within range of the service area, you can make an emergency call of 110 (Police), 119 (Fire and ambulance) or 118 (Japan Coast Guard).

From the Home screen, tap

[Phone].

Enter the emergency number and

tap [Call].

･ If a wrong number is entered, tap

on the right of the phone number field to delete the number.

❖Note

･ In Japan, when UIM is not inserted to the FOMA

terminal, the emergency numbers of 110/119/118 are not available.

･

This FOMA terminal supports "Emergency call location information". If you use the FOMA terminal to place a call to emergency numbers such as 110, 118, or 119, the information of a location where you are calling from (location information) is automatically notified to the Emergency call acceptance organization such as the Police Station. The Emergency call acceptance organization may not be able to figure out your exact location depending on the location where you place a call or radio wave condition. If you make a call without the caller ID, such as by entering a phone number with "184" for each call, the location information and phone number are not notified. However, the Emergency call acceptance organization may decide to obtain the location information and phone number regardless of your settings when they consider it is necessary for lifesaving, etc. Note that the areas/time for which the "Emergency call location information" is ready to be used vary depending on the preparatory state of each Emergency call acceptance organization.

Calling/Network Services

Continued on next page

･ When you call the Police (110), Fire/Ambulance

(119), or Maritime rescue (118) from the FOMA terminal, clearly indicate that you are calling from a mobile phone, then give your present location and mobile phone number. Also, make a point to call in a stationary position to prevent the call from being dropped. Do not power off the FOMA terminal for at least 10 minutes after the emergency call just in case the Police or Fire/Ambulance may have to get in contact with you.

･ Note that you may not connect to the local Fire

Department or Police Station depending on where you are calling from. In this case, try to call from a public phone or an ordinary phone in the neighborhood.

Making an emergency call while UIM is locked

Tap [Emergency call].

Enter the emergency number and

tap [Call].

･ If a wrong number is entered, tap

on the right of the phone number field to delete the number.

❖Note

･ In Japan, while entering PIN code on the screen

(P.93) or during PUK lock (P.93), the emergency numbers of 110/119/118 are not available.

Ending a call

Tap [ E n d cal l ] .

Making an international call (WORLD CALL)

For details on WORLD CALL, refer to DOCOMO International Services website.

From the Home screen, tap

[Phone].

Touch and hold [0] key until "+"

sign appears.

･ When making an international call, "+"

is replaced by an international access code.

Enter the country code X Area

code X A phone number of recipient and tap [Call].

･ If the area code begins with "0", omit

"0". However, "0" may be required to dial to some countries or areas such as Italy.

Receiving a call

While receiving a call, touch

(left) and drag it to (right).

❖Information

･ If you are using regular headphones without a

microphone, you need to speak to the microphone of the FOMA terminal.

Calling/Network Services

Continued on next page

･ The icon appears even during the screen lock or

key lock, and you can answer a call by the same operation.

Declining a call

While receiving a call, touch

(right) and drag it to (left).

❖Information

･ The icon appears even during the screen lock or

key lock, and you can decline a call by the same operation.

Using Stereo Headset with Microphone

You can make or answer a call with Stereo Headset with Microphone (Sample) connecting to the FOMA terminal.

Microphone

Switch

Headset connection jack

■ Making a call

Make a call with Stereo Headset

with Microphone connected.

･ An operation of making call is the

same as usual operation. (P.57)

Press the switch to end the call.

■ Receiving a call

While receiving a call, press the

switch of Stereo Headset with Microphone.

･ The call is connected. ･ When receiving a call, you can

decline the call by pressing the switch for over a second.

To end a call, press the switch

again.

❖Information

･ Even when you listen to music with Stereo Headset

with Microphone connecting to the FOMA terminal, you can answer a call by pressing the switch. Music pauses on calling, and restarts when ending the call.

Adjusting the ear speaker volume

Press m during a call.

Calling/Network Services

Continued on next page

❖Information

･ You can adjust the ear speaker volume only during

a call.

Muting the ringtone for an incoming call

Press m when a call is

received.

❖Information

･ You can also press p to mute the ringtone for an

incoming call.

･ To change ringtone volume other than when

receiving, press up or down of m on the Home screen to adjust the ringtone volume.

Call Options

By using the call option during a call, you can make a call on hold or mute the microphone.

Hold During a call, press t, tap [Hold].

Contacts Display the contacts list during a call.

Speaker Set speakerphone ON/OFF.

To cancel hold, while a call is on hold, tap [Retrive call]. ･ To set a call on hold, "Call waiting"

subscription is required. (P.74)

･ When the speakerphone is ON, a

speakerphone icon appears in the status bar.

Mute Set muting ON/OFF of the microphone

Dialpad Enter the phone number to add to

End call End a call.

during a call. ･ When the microphone is muted, a

mute icon appears in the status bar.

make a call. ･ The ongoing call is automatically on

hold.

･ To add a call, "Call waiting"

subscription is required. (P.74)

❖Note

･ Do not bring the FOMA terminal close to your ear

with the speakerphone ON to avoid hearing damage.

Call log

In the call log, missed ( ), received ( ), and dialed ( ) calls are displayed with the icons.

Displaying missed calls

When you have missed calls, appears in the status bar.

Drag the status bar downwards.

Tap [Missed call].

Calling/Network Services

Calling a number from the call log

From the Home screen, tap

[Phone] X [Call log].

Tap next to the desired number.

Adding a number from the call log to your contacts

From the Home screen, tap

[Phone] X [Call log].

Tap and hold the number, then tap

[Add to Contacts].

･ You can select [Add to Contacts] from

the menu displayed when you tap the number.

Tap desired contact, or tap [Create

new contact].

･ Tap [Create new contact] to display a

screen for selection of the saving locations appears. You can select Phone contact or docomo account as the saving location.

Edit the contact details and tap

[Done].

Deleting the call log

From the Home screen, tap

[Phone] X [Call log]. Press t, and tap [Clear call

log].

❖Information

･ You can delete only one contact by touching and

holding a contact to delete on the call log list, then tapping [Delete from call log].

Contacts

In Contacts, you can enter all your information for your personal contacts, for example, phone numbers, email addresses and web service accounts. When you view a contact, you get quick access to all communication with that contact.

Opening Contacts

From the Home screen, tap ,

then tap [Contacts].

･ You can also open Contacts from the

Home screen, tap [Phone] X [Contacts].

Calling/Network Services

Continued on next page

❖Information

･ The first time you open Contacts, a setup wizard

starts. In the setup wizard, you can load contacts from UIM or microSD card, or synchronize contacts with the account that you specified in advance. To use Contacts, tap [Open Phonebook].

Contacts screen

On the Contacts screen, you can view details of your contacts. You can add a contact picture, and display updated information of online services.

a b

a Set conditions of contacts to display b Contact search field c Key for adding a new contact d Your own phone number e A contact saved in Contacts f Japanese syllabary or alphabetical index for

browsing contacts

g Online status* of Google Talk (Chat) (P.111) h Updates from your Facebook contacts i Screen tabs (Phone/Call log/Contacts/Favorites)

* Depending on the usage, it may be different from online

display of Google Talk.

c d

g h

Managing contacts

Adding a contact

From the Home screen, tap ,

then tap [Contacts]. Press t, then tap [New

contact].

Tap [docomo]/[Phone contact].

･ When you set Google account etc., it

appears as a saving location.

Enter a name.

Enter or select the desired

additional information for the contact.

･ You can add items other than phone

number, email address and ringtone by tapping [Add field].

Tap [ D o ne].

❖Information

･ You can also add a contact by tapping c ()

on the Contacts screen (P.62).

･ For using "Send calls directly to voicem.", a

subscription of Voice Mail service is required. For details, see "Voice Mail Service" (P.72).

･ When you save "ふりがな（姓／名） (Reading

(Last name/First name))", contacts list is displayed according to Japanese syllabary order or alphabets (only when Select language is set to 日本語 (Japanese)).

Calling/Network Services

Using shortcuts of Contacts

When you tap the photo (image) part on contacts list screen, shortcuts for phone number, mail, etc. appear. Tap the shortcut to make a call, or create and send a mail.

Make a call to saved phone number.

"Info" filter screen (P.68) of the contact appears.

Create and send message (SMS).

Select an email application to create and send an email.

* You can also use the registered Google Talk account,

addresses, etc.

❖Information

･ When you tap a part other than photo (image) on

the contacts list screen, "Info" filter screen (P.68) of the contact appears instead of shortcuts.

･ Email shortcut appears when email address is

saved in the selected contact and you have set your email account.

Searching for a contact

From the Home screen, tap ,

then tap [Contacts].

Enter searching name or reading in

the search field.

･ All contacts beginning with those

letters appear.

❖Information

･ You can switch the view contacts between

"Contacts w. ph. number" and "Online contacts" by tapping a ( ) on the Contacts screen (P.62). Also, you can set to show/hide contacts by account or group.

Editing a contact

From the Home screen, tap ,

then tap [Contacts].

Tap the name part of contact you

want to edit.

･ "Info" filter screen (P.68) of the contact

appears.

･ When you tap the image (photo) part

of the contact, contact shortcuts appear. Tap to display "Info" filter screen (P.68).

Tap [Edit].

･ By tapping (Add field) on the

editing screen, you can add information to enter.

Edit the desired information and

tap [Done].

Linking contacts

You can bind multiple contacts together into one.

From the Home screen, tap ,

then tap [Contacts].

Calling/Network Services

Continued on next page

Touch and hold the desired

contact, then tap [Join contacts].

･ The link candidates appear.

Tap the contact to link.

Tap [OK].

❖Information

･ To cancel link of contacts, on Contact edit screen,

press t, then tap [Separate].

Auto linking function

Contacts of the same name registered in different saving locations separately are automatically linked and collected as one.

■ Conditions automatically linked

If different saving locations (Phone contact/ docomo account/Google account) are registered, they are automatically linked.

Examples:

Saving location: Phone contact Last name: Docomo First name: Ichiro

Saving location: Google account

□□□@gmail.com)*

( Last name: Docomo First name: Ichiro

* When you set two or more Google accounts etc., they

are recognized as different saving locations and the contacts are automatically linked.

Saving location: docomo account Last name: Docomo First name: Ichiro

Saving location account

△△△@gmail.com)*

( Last name: Docomo First name: Ichiro

: Google

Alternatively, contacts whose saving locations (account types) are different and registered in any of the following conditions, the contacts are automatically linked.

Examples:

Contacts are registered turning over the last name and first name.

Last name: Docomo First name: Ichiro

The last name and first name are registered in the same field, or only the last names or first names are registered in contacts.

Last name: Docomo First name: Ichiro

Different last names/first names are registered under the same reading (only when Select language is set to 日本語 (Japanese)).

Last name: ドコモ (Docomo) First name: 一郎 (Ichiro) Last name (reading):

どこも

First name (reading):

いちろう

Last name: Ichiro First name: Docomo

Last name: Docomo Ichiro First name:

Last name: 土戸茂 (Docomo) First name: 伊知朗 (Ichiro) Last name (reading):

どこも

First name (reading):

いちろう

Calling/Network Services

Continued on next page

The last names/first names are the same as the reading of last names/first names (only when Select language is set to 日本語 (Japanese)).

Last name: ドコモ (Docomo) First name: 一郎 (Ichiro) Last name (reading):

どこも

First name (reading):

いちろう

Last names/first names are not registered but the identical phone numbers or mail addresses are registered (similar last names/first names may be linked)

Last name: ドコモ (Docomo) First name: 一郎 (Ichiro) Phone number: 090△△△△△△△△

Last name: どこも First name: いちろう

Last name: First name: Phone number: 090△△△△△△△△

❖Information

･ If last names/first names are registered in the

following conditions, the contacts are also automatically linked.

- Two-byte hiragana/two-byte katakana/one-byte katakana

- Upper case/Lower case of alphabets

- The same characters with or without accent marks or phonetic symbols

■ Conditions not automatically linked

Contacts with the same last name/first name but registered in the same saving location are not automatically linked.

Examples:

Saving location: Phone contact Last name: Docomo First name: Ichiro

Deleting contacts

From the Home screen, tap ,

then tap [Contacts]. Press t, then tap [Delete

contacts].

Mark the contacts you want to

delete.

･ If you want to delete all contacts, tap

[Mark all].

Tap [Delete] X [OK].

❖Information

･ You can also delete the contacts by touching and

holding a contact on the Contacts screen, then tapping [Delete contact].

Calling/Network Services

Calling a contact

From the Home screen, tap ,

then tap [Contacts].

Tap a name of contact to call to.

Tap a desired phone number.

Checking Myself and editing contact information

From the Home screen, tap ,

then tap [Contacts].

Tap [XXX-XXXX-XXXX]

(My number) at the top of the contact list.

Tap [Edit].

･ The "Myself" edit screen appears.

Enter the new information or make

the changes you want.

･ By tapping (Add field) on the

editing screen, you can add information to enter.

When you are done, tap [Done].

❖Information

･ In "Myself", you can add multiple phone numbers,

emails, etc. The history of dialed/received calls from the registered phone numbers is displayed in "Call log" of "Info" filter screen (P.68).

Sending your contact via Bluetooth/Email/Gmail

You can send the saved contacts or "Myself" information by using Bluetooth function (P.149), email attachment, etc.

From the Home screen, tap ,

then tap [Contacts].

Tap [XXX-XXXX-XXXX]

(My number) or the contact. Press t, then tap [Send

contact].

On the send confirmation screen,

tap [OK].

■ Using Bluetooth function

Tap [Bluetooth] X [Turn on] X Select a destination device from the list. ･ Bluetooth function is ON and

searches destination devices.

･ When Bluetooth function is already

ON, Bluetooth terminal scan screen appears.

Calling/Network Services

Continued on next page

■ Attaching contacts to Email/Gmail

Tap [Email]/[Gmail]. ･ Create an email on each compose

screen, and send it.

･ "Email" appears when you have set an

email account. If you select "Gmail" when you have not set an account, setup wizard appears. You can create and send email after settings are done.

❖Information

･ You can send multiple registered contacts all at

once.

- From the Home screen, tap X [Contacts], press t and tap [Send contacts]. Mark the checkboxes for the contacts you want to send and tap [Send]. If you want to mark all contacts, tap [Mark all]. On the send confirmation screen, tap [OK].

Marking a contact as a favorite

You can mark a contact as a favorite. The favorite list provides quick access to the contacts you have marked.

From the Home screen, tap ,

then tap [Contacts].

Touch and hold the contact you

want to mark.

Tap [Add to Favorites].

❖Information

･ You can also add the contacts to favorites by

tapping [Favorites] on "Info" filter screen (P.68).

･ On the Contacts screen, tap [Favorites] to display

contacts registered to Favorites.

Setting a photo to a contact

From the Home screen, tap ,

then tap [Contacts].

Tap the contact.

Tap [Edit].

Tap .

Tap [Gallery]/[Take new photo].

･ Select [Gallery] to select a saved

photo and add it.

･ Select [Take new photo] to shoot a

photo and save it.

Tap [ D o ne].

❖Information

･ You can also set photo to a contact by the

following operation.

- From the Home screen, X Tap [Gallery] and

select an image to set. Tap [Menu] at the lower right of the screen X [More] X [Set as] X [Contact picture] and select a contact you want to register to, and then tap [Save].

Calling/Network Services

The contact information filter

When you are viewing a contact details screen, you can flick the filter at the bottom of the screen right or left to show the following information.

Filter Information

Info Contact phone numbers, mail

Facebook Facebook status updates for the

Messaging Message (SMS) conversations with

Calls Call histor y for the contact

addresses, addresses, Facebook information, etc.

contact ･ Appears if you have set Faceboo k

account in Timescape.

the contact

Setting to display Facebook updates on contacts

You can view the Facebook update information if the contacts are linked to online services such as Facebook.

From the Home screen, tap ,

then tap [Contacts]. Press t, tap [Settings] X

[Accounts & sync] X [Add account].

Tap [Facebook].

･ For the first time to login to Facebook,

a message confirming if you agree or not agree with the End user license agreement appears.

Enter account information and tap

[Login].

･ After log in, the confirmation screen

for synchronizing contacts with members appears. Tap Select any of [Sync all]/[Sync with existing contacts]/[Don't sync].

Tap [ N ext] X [Finish].

❖Information

･ To display Facebook filter in "Info" filter screen

(P.68), login to Facebook from Timescape to refresh in Timescape.

Exporting/Importing contacts

You can export/import contacts from/to microSD card or UIM. This is useful, for example, when you want to transfer the contact information to another phone.

❖Information

･ You can also use a synchronization service for

synchronizing your contacts. For details, see "Data synchronization" (P.99).

Calling/Network Services

Continued on next page

･ When contacts are imported to other mobile

phone, phone number type "Mobile:/M", "Work:/W" or "Home:/H" may appear at the next to the name of the contacts backed up from the FOMA terminal to UIM. If there is no corresponding item, "/O" may appear.

Exporting all contacts on microSD card

From the Home screen, tap ,

then tap [Contacts]. Press t, then tap [Back up

contacts]. X [Memory card] (microSD card).

Tap [OK].

Importing contacts from microSD card

From the Home screen, tap ,

then tap [Contacts]. Press t, then tap [Import

contacts]. X [Memory card] (microSD card).

Tap [docomo]/[Phone contact].

･ When you set Google account etc., it

appears as an import destination.

Select the vCard file to import.

･ If there is only one file, vCard file

selection screen does not appear. The file is imported immediately.

･ If a file has multiple contacts, they are

imported all at once.

･ If there are two or more vCard files,

tap any of [Import vCard file]/[Import vCard files]/[Import all vCard files] to select.

Tap [OK].

❖Information

･ Some part of data may not be imported or

exported depending on the contacts.

Exporting names and numbers on UIM

From the Home screen, tap ,

then tap [Contacts]. Press t, then tap [Back up

contacts]. X [SIM card].

Mark the contacts you want to

copy.

･ If you want to mark all contacts, tap

[Mark all].

Tap [Back up].

Calling/Network Services

Continued on next page

Tap [Add contacts]/[Replace all

contacts].

･ If you select [Replace all contacts], all

existing UIM information is replaced.

❖Information

･ When you copy a contact to the UIM, only the

contact name and the first number is saved. This is due to limited memory on a UIM.

･ Contacts without phone number cannot be saved

to the UIM.

Importing contacts from UIM

From the Home screen, tap ,

then tap [Contacts]. Press t, then tap [Import

contacts]. X [SIM card].

Tap [docomo]/[Phone contact].

･ When you set Google account etc., it

appears as an import destination.

To import one contact, tap the

contact you want to import.

･ To import all contacts, press t,

then tap [Import all].

･ If there is a contact whose name is

matched with the imported contact, the contact is imported as a separated one.

❖Information

･ Only a name and the first phone number can be

imported to a contact.

Using PhoneBookCopy

You can copy the Contacts data to or from another FOMA terminal by using microSD card. You can also copy the Contacts data registered in Google account to docomo account.

From the Home screen, tap ,

then tap [PhoneBookCopy].

･ For the first time of use, agree to "使用

許諾契約書 (License Agreement)".

Exporting contacts saved in docomo account to microSD card

On the "エクスポート (Export)" tab

screen, tap [ 開始 (Start)].

Importing contacts on microSD card to docomo account

On the "インポート (Import)" tab

screen, tap a file you want to import.

Tap [ 上書き (Overwrite)]/

[追加 (Add)].

Calling/Network Services

Copying contacts registered in Google account to docomo account

On the "docomoアカウントへコ

ピー (Copy to account)" tab screen, tap a Google account you want to copy.

Tap [ 上書き (Overwrite)]/

[追加 (Add)].

･ You can also copy the Contacts data

saved in "Phone contact" to docomo account as well as Google account.

Using Phonebook backup

You can back up contacts to the Phonebook back up center automatically on a regular basis and restore the contacts in case of losing the FOMA terminal or erasing the contacts accidentally. For details on Phonebook backup, refer to "ご利用ガイドブック (spモード < スマートフォン> 編) Mobile Phone User's Guide [sp- mode <Smartphone>] (in Japanese only)".

Network Services

Available Network Services

You can use the following DOCOMO network services on the FOMA terminal. For details on the outline and how to use each service, see the relevant pages indicated in the following table. ･ You cannot use the network services when

you are outside of the service area or in a location without the radio wave.

･ For details, see the "Mobile Phone User's

Guide [Network Services]".

･ For subscription and inquiry, contact

"General Inquiries" on the last page of this manual.

Service name

Voi ce M a il Service

Call Waiting Service

Call Forwarding Service

Caller ID Notification Service

Monthly

Application Page

charge

Paid Required P.72

Paid Required P.74

Free Required P.76

Free Not required P.77

Calling/Network Services

Continued on next page

❖Information

･ In this manual, the outlines of each network service

are described with menu operations.

Voice Mail Service

The Voice Mail Service takes messages for you, as long as it answers a call with the answering message, if there is an incoming call when you are in a location without the radio wave, while the FOMA terminal is powered off, or when you cannot answer a call within the preset ring time. ･ When the Voice Mail Service is set to

"Activate" and if you do not answer an incoming call, the call is saved in "Call log" as a "Missed call" and (Missed call) appears in the status bar.

･ The FOMA terminal does not support Voice

Mail service of videophone call. Call "1412" to set "Not support".

❖Information

･ This FOMA terminal does not have Record

message function which records voice messages on internal memory. Use the Voice Mail Service.

･ The message can be recorded up to 3 minutes for

1 message, up to 20 messages, and stored up to 72 hours.

･ The number of Voice Mail messages appears until

you have played all messages.

Basic flow of the Voice Mail Service

Activate the Voice Mail Service.

▼

Your FOMA terminal receives a call.

▼

If you do not answer the call, it is connected to the Voice Mail service center.

▼

The caller leaves a message.

If you are in a hurry and wish to leave a message without listening to the Voice Mail answering message, you can interrupt the answering message and switch to message recording mode immediately by tapping [Dialpad]

▼

The receiver is notified that the Voice Mail service center has taken the voice message.

▼

Play the voice message.

→

[#].

Calling/Network Services

Setting Voice Mail Service

From the Home screen, press t

and tap [Settings].

Tap [Call settings] X [Network

service setting].

Tap [Voicemail].

･ Select items you want to use from the

following.

Activate Voi ce ma il

Set ring time Enter the ring time (0 to 120

Deactivate Voi ce ma il

Check Voicemail setting

Play messages* Tap [OK] to call the Voice Mail

Voicemail setting*

Check messages* Check if a new message is

Tap [OK] to activate the Voice Mail Service.

seconds). It changes only the ring time.

Tap [OK] to deactivate the Voice Mail Service.

Check the current service settings.

service center. After this step, follow the voice prompts to play the message.

Tap [OK] to change the Voice Mail setting with the voice prompts. The call is connected to the Voice Mail service center. After this step, follow the voice prompts to operate.

stored. After checking, the completion message appears.

Notification settings

Activate Missed Call Notification

Deactivate Missed Call Notification

Check setting Check the notification settings.

* After operation is finished, you receive the "NTT

DoCoMo VM:XX" SMS.

Set whether to alert you of a new message with the tone or vibration.

When it is received while the FOMA terminal is powered off or outside of the service area, an SMS is sent to notify you of the information about the call (date, time and the caller ID) once you turn the FOMA terminal back on or move back in to the service area. Select [All calls] to notify you of all received calls. Select [Calls with Caller ID] to notify you of only the calls with the caller ID.

While starting the notification, tap this item to deactivate the notification.

❖Information

･ If you have the recorded messages stored at the

Voice Mail service center, (New SMS message) and (Voice Mail message) appear on the status bar. (Voice Mail message) disappears when you delete all messages.

･ The notification setting and notifications (message

(SMS) reception) are not charged.

Calling/Network Services

Playing the voice message

When the SMS notification "NTT

DoCoMo VM:XX" appears, tap [New message] from the notification panel (P.34).

･ A recorded message plays.

Follow the voice prompts to

operate.

Call Waiting

When there is another incoming call while you are on a call, the in-call ring tone notifies you of the second call. You can answer the second call by putting the first call on hold. You can also put your current call on hold and place a call to another party.

❖Information

･ Even when the call is on hold, the caller is charged

for a call fee.

Setting Call Waiting

From the Home screen, press t

and tap [Settings].

Tap [Call settings] X [Network

service setting].

Tap [Call Waiting].

You can select the following operations.

Activate Call Waiting

Deactivate Call Waiting

Check settings You can check the current

Tap [OK] to activate the Call Waiting Service.

Tap [OK] to deactivate the Call Waiting Service.

service settings.

Putting the current call on hold and answering an incoming call

When you hear the beep during a

call, tap [Answer].

The first call is put automatically on hold and the incoming call is received. ･ The FOMA terminal does not support

Conference call. When you tap to the upper right of the screen, "Unable to conference calls" appears.

･ Tap [Busy] to connect the incoming

call to the Voice Mail service center. Activating Voice Mail service is required beforehand.

Calling/Network Services

Continued on next page

Switch to the first call.

･ To end the later call, tap [End call].

The later call is terminated and switched to the first call.

･ To put the later call on hold, tap

[Switch to this call]. The later call is put on hold and switched to the first call. Tapping [Switch to this call] switches to the other party.

Ending the current call and answering an incoming call

When you hear the beep during a

call, tap [End current call and answer].

･ The first call is terminated and the

incoming call is received.

Putting the current call on hold and making a call to another party

During a call, tap [Contacts]/

[Dialpad].

Enter the other party's phone

number, then tap .

･ The first call is automatically on hold

and switched to the new call you made. You can also search for a contact by tapping [Contacts] and [Call log].

Switch to the first call.

･ To terminate the new call, tap [End

call]. The new call is terminated and switched to the first call.

･ To put the new call on hold, tap

[Switch to this call]. The new call is put on hold and switched to the first call. Tapping [Switch to this call] switches to the other party.

Calling/Network Services

Call Forwarding Service

The Call Forwarding Service forwards a voice call to a preset forwarding number when you are in a location without the radio wave, the FOMA terminal is powered off, or you do not answer the call within the preset ring time. ･ When the Call Forwarding Service is set to

"Activate Call Forwarding" and if you do not answer an incoming voice call, the call is saved in "Call log" as a "Missed call" and (Missed call) appears in the status bar.

Basic flow of the Call Forwarding Service

Save the forwarding number.

▼

Activate the Call Forwarding Service.

▼

Your FOMA terminal receives a call.

▼

If you do not answer the call, it is automatically forwarded to the specified forwarding number.

Call charge for the Call Forwarding Service

Caller

The caller is charged for a call fee.

Call Forwarding Service subscriber

The Call Forwarding Service subscriber is charged for a call fee.

Forwarding party

Information

❖

･ Even when the Call Forwarding Service is set to

"Activate Call Forwarding", you can answer the call during a ringtone sounds.

Setting Call Forwarding Service

From the Home screen, press t

and tap [Settings].

Tap [Call settings] X [Network

service setting].

Calling/Network Services

Continued on next page

Tap [Call Forwarding].

･ Select items you want to use.

Activate Call Forwarding

Change forwarding number

Deactivate Call Forwarding

Activate Call Forwarding

Setting if forwarding number is busy*

Check setting You can check the current service

* A subscription of Voice Mail service is required.

Enter the forwarding number and ring time, then tap [OK] to activate the Call Forwarding Service.

Mark the checkbox and enter the forwarding number.

Mark the checkbox and enter the ring time (0 to 120 seconds). If the ring time is set to 0 seconds, an incoming call is not saved in "Call log".

While the Call Forwarding Service is activated, tap this item and [OK] to deactivate the Call Forwarding Service.

Change the forwarding number. Enter the forwarding number and tap [OK].

Mark the checkbox to change the forwarding number and to activate the Call Forwarding Service simultaneously.

When the forwarding number is busy, an incoming call is connected to the Voice Mail service center. Tap [Connect] to turn on the setting; tap [Do not connect] to turn off the setting.

settings.

Setting on/off of the Call Forwarding guidance

From the Home screen, tap

[Phone].

[1] [4] [2] [9] X Tap [Call].

･ Follow the voice prompts to operate.

For details, see the "Mobile Phone User's Guide [Network Services]".

Caller ID Notification

When making a call, your phone number can be shown in the display of the recipient's phone you are calling. The caller ID is important personal information. Carefully decide whether you notify a recipient of your caller ID. ･ You cannot set the Caller ID notification

where the FOMA terminal indicates the outside of service area ( ).

･ The setting is available only the other party's

phone can display the caller ID.

･ If an announcement requesting caller ID is

heard when making a call, set Caller ID notification or add prefix "186" to the phone number to call again.

From the Home screen, press t

and tap [Settings].

Calling/Network Services

Continued on next page

Tap [Call settings] X [Network

service setting].

Tap [Caller ID Notification].

･ Select items you want to use.

Activate Caller ID Notification

Deactivate Caller ID Notification

Check settings

Enter the Network security code, then tap [OK]. Your phone number is notified to the other party.

Enter the Network security code, then tap [OK]. The caller ID notification is deactivated.

Check the current settings.

Calling/Network Services

Settings

Viewing the setting menu

From the Home screen, press

Tap [Settings].

■ Setting menu

Sony Ericsson Connect the FOMA

Wireless & networks P. 7 9

Call settings P. 8 6

Sound P. 8 7

Display P. 89

Location & security P. 9 0

Applications P. 9 5

Accounts & sync P. 9 7

Privacy P. 1 00

Storage P. 1 0 1

Language & keyboard P. 1 0 2

Voice input & output P. 1 0 2

Accessibility P. 1 0 3

Date & time P. 1 03

About phone P. 1 0 4

terminal to another device or PC via USB connection or Wi-Fi. (P.144)

❖Information

･ Alternatively, from the Home screen, tap , then

tap [Settings].

Wireless & networks

The FOMA terminal automatically switches between 2G and 3G networks depending on availability.

Airplane mode P. 81

Wi-Fi/Wi-Fi settings P. 82

Bluetooth/Bluetooth settings P.1 4 9

VPN settings P. 85

Mobile networks P.79, P.177

Setting an access point

An access point for connecting to the Internet (sp-mode, mopera U) is already registered. You can add or change it if necessary. By default, sp-mode (P.80) is set for the usual access point.

Checking the access point you use

From the Settings screen (P.79),

tap [Wireless & networks] X [Mobile networks] X [Access Point Names].

･ Available access points (APN)

appear.

Continued on next page

Settings

❖Information

･ If you have several available connections, a

marked radio button to the right indicates the active network connection.

Setting an access point additionally

From the Settings screen (P.79),

tap [Wireless & networks] X [Mobile networks] X [Access Point Names].

Press t.

Tap [New APN].

Tap [Name], enter a name and tap

[OK].

Tap [APN] and enter the access

point name and tap [OK].

Tap and enter all other information

required by your network operator. Press t, then tap [Save].

❖Information

･ Do not change the MCC/MNC. If you change MCC/

MNC to other than the default value (440/10), the settings do not appear on the APNs screen. When the MCC/MNC settings do not appear on the APNs screen, make APN settings with [Reset to default] or [New APN] again.

･ Note that, when using the prediction conversion by

one-byte alphabet entry mode (English mode) with mark in [Auto space] checkbox on Japanese keyboard settings screen (P.55), spaces may be entered automatically. In this case, delete spaces.

Initializing an access point

By initializing an access point, the default state is restored.

From the Settings screen (P.79),

tap [Wireless & networks] X [Mobile networks] X [Access Point Names].

Press t, then tap [Reset to

default].

sp-mode

sp-mode is ISP for NTT DOCOMO smartphone. In addition to accessing Internet, you can use the mail service using the same address as i-mode mail (@docomo.ne.jp), etc. sp-mode is a service requiring subscription. For details on sp-mode, refer to NTT DOCOMO website.

Settings

mopera U Airplane mode

mopera U is ISP of NTT DOCOMO's Internet connection. If you have subscribed to mopera U, you can use Internet after making the simple settings. mopera U is a service requiring subscription.

Setting mopera U

From the Settings screen (P.79),

tap [Wireless & networks] X [Mobile networks] X [Access Point Names].

Mark [mopera U (スマートフォン定

額)]/[mopera U設定] radio button.

･ Return to the Home screen and open

the Browser. You can enjoy the nice Internet access.

❖Information

･ "mopera U 設定" is an access point for setting

mopera U. When you use the access point for setting mopera U, packet communication charges for setting do not apply. Note that you can set only the initial setting screen or the change setting screen. For details on mopera U settings, refer to mopera U website.

･ Subscription to packet flat-rate service is required

for using "mopera U (スマートフォン定額 )". For details on mopera U (スマートフォン定額), refer to NTT DOCOMO website.

In this mode, the functions of using radio wave transmissions such as calling, accessing to the Internet (including sending/ receiving mails), etc. are disabled. It can be useful when you want to operate the FOMA terminal with no interruption of incoming calls or mails.

Turning on Airplane mode

From the Settings screen (P.79),

tap [Wireless & networks].

Mark [Airplane mode] checkbox.

･ When you unmark [Airplane mode]

checkbox, the Airplane mode turns off.

❖Information

･ You can also switch ON/OFF of the Airplane mode by

pressing and holding p for over a second to switch to the Phone options menu, then tapping [Airplane mode].

･ Even if Airplane mode is ON, Wi-Fi can be turned

ON. Be careful not to use Wi-Fi in a place where the use is prohibited such as in airplane or hospital.

Settings

About Wi-Fi Turni n g o n Wi-F i

Using Wi-Fi, you can access the Internet via Wi-Fi network with your FOMA terminal. ･ Even when Wi-Fi is ON, packet

communication is available. However, while you connect Wi-Fi network, Wi-Fi comes first.

･ When a Wi-Fi network is disconnected,

connection is automatically switched to a 3G/GPRS network. Note that packet communication fee applies for using 3G/ GPRS network.

Before using Wi-Fi

To use Wi-Fi, turn on Wi-Fi and search available Wi-Fi network, then connect it. ･ To access the Internet using Wi-Fi, connect

to Wi-Fi network in advance.

❖Information

･ Make sure to receive enough signal strength for

using Wi-Fi. The signal strength of the Wi-Fi network varies by the location of the FOMA terminal. Moving closer to the Wi-Fi router might enhance the signal strength.

From the Settings screen (P.79),

tap [Wireless & networks].

Mark [Wi-Fi] checkbox.

･ The FOMA terminal scans for

available Wi-Fi networks.

❖Information

･ It may take a few seconds before the Wi-Fi

connection is ON.

Connecting to a Wi-Fi network

From the Settings screen (P.79),

tap [Wireless & networks] X [Wi-Fi settings].

･ Available Wi-Fi networks are

displayed under [Wi-Fi networks]. The available networks may be open or secured. This is indicated by or

next to the Wi-Fi network name.

Select Wi-Fi network you want to

connect, tap [Connect]

･ If you are trying to connect to a

protected Wi-Fi network, you are asked to enter the security key for that Wi-Fi network before you can connect to it.

Continued on next pageContinued on next page

Settings

❖Information

･ The next time you connect to a Wi-Fi network, the

security key is saved in the FOMA terminal.

■ Wi-Fi network status icons on status

bar

The following icons appear according to the Wi-Fi network connection status.

Appears when connected to Wi-Fi network.

Appears when connected to Wi-Fi network using AutoIP function.

Appears when any open network within the service area is detected*.

* Without connected to Wi-Fi network, you need to set Wi-

Fi Network notification to ON beforehand. (P.83)

Wi-Fi network status

When you are connected to a Wi-Fi network or when there are Wi-Fi networks available in your vicinity, you can see the status of these Wi-Fi networks. You can also enable the FOMA terminal to notify you wherever a Wi-Fi network is detected.

Setting the Wi-Fi network notification to ON

Confirm that Wi-Fi is turned on,

and then on the Settings screen (P.79), tap [Wireless & networks] X [Wi-Fi settings].

Mark [Network notification]

checkbox.

Scanning for Wi-Fi networks manually

From the Settings screen (P.79),

tap [Wireless & networks] X [Wi-Fi settings].

Press t.

Tap [ S c an].

･ Scanning for Wi-Fi networks is started,

and they are displayed under "Wi-Fi networks".

Tap a Wi-Fi network in the list to

connect to it.

Settings

Advanced Wi-Fi settings

Before you add a Wi-Fi network manually, you need to turn on the Wi-Fi setting. (P.82)

Adding a Wi-Fi network manually

From the Settings screen (P.79),

tap [Wireless & networks] X [Wi-Fi settings].

Tap [Add Wi-Fi network].

Enter [Network SSID] name of the

Wi-Fi network you want to add.

Tap [Security] field, then mark a

radio button of security type for the Wi-Fi network you want to add.

If required, enter security

information for the Wi-Fi network you want to add.

Tap [ S ave] .

Viewing detailed information on a connected Wi-Fi network

From the Settings screen (P.79),

tap [Wireless & networks] X [Wi-Fi settings].

Tap the Wi-Fi network that you are

currently connected to.

･ The detailed network information is

displayed.

Wi-Fi sleep policy

By changing a Wi-Fi sleep policy, you can choose to disable the Wi-Fi function in the FOMA terminal when the screen turns off. You can also set the FOMA terminal to always turn on the Wi-Fi function or to turn it on when the FOMA terminal is charged.

❖Information

･ When a Wi-Fi network is disconnected, connection

is automatically switched to a 3G/GPRS network.

Adding a Wi-Fi sleep policy

From the Settings screen (P.79),

tap [Wireless & networks] X [Wi-Fi settings].

Press t.

Tap [ A dva n c ed].

Continued on next page

Settings

Tap [Wi-Fi sleep policy].

Tap any of [When screen turns off]/

[Never when plugged in]/[Never].

Using a static IP address

You can set up the FOMA terminal to connect to a Wi-Fi network using a static IP address.

Setting up a static IP address

From the Settings screen (P.79),

tap [Wireless & networks] X [Wi-Fi settings].

Press t.

Tap [ A dva n c ed].

Mark [Use static IP] checkbox.

･ Item of IP settings can be selected.

Tap an item to enter necessary

information.

･ Enter "IP address", "Gateway",

"Netmask", "DNS1" to use a static IP address.

Press t.

Tap [ S ave] .

Connecting to a VPN (Virtual Private Network)

Virtual Private Network (VPN) is a technology to connect to the information in a protected local network from another network. Generally, VPNs are provided to companies, schools and other facilities. A user can access to the information in the local network from outside of the premises. To set up a VPN access from the FOMA terminal, you need to retrieve the information related to security from your network administrator. For details, refer to http://www.sonyericsson.co.jp/support/ ･ This FOMA terminal supports the following

VPNs:

- PPTP VPN

- L2TP VPN

- L2TP/IPSec PSK VPN

- L2TP/IPSec CRT VPN

Adding a VPN

From the Settings screen (P.79),

tap [Wireless & networks] X [VPN settings].

Tap [ A dd VP N ] .

Tap a VPN type to add.

Continued on next page

Settings

If a setting screen appears, follow

the instruction of the network administrator to set required items of VPN settings.

Press t, then tap [Save].

･ A new VPN is added in the list on VPN

settings screen.

❖Information

･ Added VPNs can be edited or deleted.

To edit VPNs, touch and hold a desired VPN, then tap [Edit network]. Change the VPN settings, as required, press t and tap [Save]. To delete, touch and hold a VPN to be removed, then tap [Delete network] X [OK].

Connecting to a VPN

From the Settings screen (P.79),

tap [Wireless & networks] X [VPN settings].

･ Added VPNs are displayed in the list

on the VPN setting screen.

Tap a VPN to connect to.

If the dialog box appears, enter the

desired authentication information and tap [Connect].

･ When you are connected to a VPN,

the connecting notification appears in the status bar. When you are disconnected, the notification indicating to return to the VPN setting screen appears, so that you can reconnect to. For details, see "Status bar" (P.32).

Disconnecting a VPN

Open the Notification panel, tap

the VPN connecting notification.

･ Tap a connecting VPN to disconnect.

Call settings

You can use the network services and search for available networks.

Network service setting

Network operators When you start using

P. 71

overseas or move out of your operator's network, the FOMA terminal searches another available network and reconnects to it.

Continued on next page

Settings

Noise suppression Makes the other party's

Accounts Set Internet phone (SIP)

Use Internet calling Set Internet phone (SIP) call

voice clear to hear during a call.

account.

method.

Sound

Set ringtones, operation sound, vibrator, etc.

Silent mode P. 8 7

Vibrate P.8 7

Vol um e P. 8 8

Phone ringtone P. 8 8

Notification ringtone P. 8 9

Audible touch tones P. 8 9

Audible selection P. 8 9

Screen lock sounds Set sound ON/OFF while the

Haptic feedback Set whether to vibrate for

screen is locked.

some operations such as specified software key operation.

Setting the FOMA terminal to silent mode

Press p for over a second.

･ Phone options menu appears.

Tap [Silent mode].

❖Information

･ Alternatively, from the Settings screen (P.79), tap

[Sound] X [Silent mode].

･ Setting the phone to silent mode does not mute

sounds (playback of video or music, alarm, etc.) other than the ringtone, operation sound, and notification sounds.

Setting the vibrator

From the Settings screen (P.79),

tap [Sound] X [Vibrate].

Tap any of [Always]/[Never]/[Only

in Silent mode]/[Only when not in Silent mode].

Settings

Adjusting the volume Adjusting the ringer volume

From the Settings screen (P.79),

tap [Sound] X [Volume].

･ Adjust the volume of following items.

-Ringtone

- Media (sounds of the music player, Gallery and FM radio)

-Alarm

- Notification

Drag the slider left or right to

adjust the level.

･ Drag the slider to the left for volume

down, or to the right for volume up.

Tap [OK].

❖Information

･ By default, Notification volume is adjusted to the

same as Ringtone volume. To adjust Ringtone and Notification separately, unmark [Use incoming call volume for notifications] in Step 1. Ringtone and Notification volume adjustment sliders appear, then drag each slider to the right or left to adjust volume.

with the volume key

From the Home screen, press up

or down of m.

･ The volume adjustment bar appears,

you can adjust the volume up or down.

❖Information

･ You can also press m or p to mute the

ringtone for an incoming call.

Setting a ringtone

From the Settings screen (P.79),

tap [Sound] X [Phone ringtone].

Select a ringtone and tap [Done].

･ You can set voice file in ".wav", ".m4a"

or in other format which is transferred from Media Go (P.148) or downloaded from the Internet as a ringtone. (P.142)

❖Information

･ To set a ringtone oth er than the ones stored by

default, you can also set from [Music librar y].

Settings

Selecting a notification ringtone

From the Settings screen (P.79),

tap [Sound] X [Notification ringtone].

Select a ringtone and tap [Done].

❖Information

･ To set a notification sound other than the ones

stored by default, you can also set from [Music library].

Setting touch tones to ON

From the Settings screen (P.79),

tap [Sound].

Mark [Audible touch tones] or

[Audible selection].

･ If you unmarked them, any operation

tone does not sound when you touch or tap.

❖Information

･ "Audible touch tones" is a tone for numeric key

operations. "Audible selection" is a tone when selecting menu item.

･ To set the key sound of software keyboard, from

the Settings screen (P.79), tap [Language & keyboard], and select a type of software keyboard.

Display

Set brightness, orientation of the screen, etc.

Mobile BRAVIA Engine

Brightness P. 8 9

Auto-rotate screen P. 9 0

Animation P. 9 0

Screen timeout P.9 0

Adjusting the screen brightness

From the Settings screen (P.79),

tap [Display] X [Brightness].

Drag the slider to the right or left.

･ Drag the slider to the left for dimmer

screen, or to the right for brighter screen.

Tap [OK].

To view photos or movies colorfully and beautifully, set image quality improving procedure (Mobile BRAVIA Engine). It adjusts contrast, color shade, etc.

Settings

Changing orientation of the screen

You can set the screen orientation to change automatically between landscape and portrait view when you turn the FOMA terminal sideways/paleways.

❖Information

･ Even when you change the orientation of the

FOMA terminal, the screen may not change to landscape view depending on the screen such as Home screen, etc.

Setting to change to landscape view

From the Settings screen (P.79),

tap [Display].

Mark [Auto-rotate screen]

checkbox.

Setting animation effect to transition

Set animation effect which shows transition of screen smoothly.

From the Settings screen (P.79),

tap [Display] X [Animation].

Select an animation option.

Adjusting the idle time before the screen turns off

From the Settings screen (P.79),

tap [Display] X [Screen timeout].

Select a time option before the

screen turns off.

❖Information

･ To turn the screen off immediately, press p.

Location & security

Set options related to location information and security.

Use wireless networks P. 1 6 1

Use GPS satellites P.1 6 1

Set up screen lock P.9 3

Set up SIM card lock P. 9 2

Visible passwords Set whether to show the

Select device administrators

Use secure credentials Allow applications to

input character before "・" appears on the password entry screen.

Add or remove available device administrators.

access secure certificates and other credentials.*

Continued on next page

Settings

Install from SD card Install encrypted

Set password Se t or change the

Clear storage Delete all certificates and

*1 Set the password to the credential storage in advance. *2 Save certificates and credential information in the

credential storage.

certificates from microSD card.

credential storage* password.

credential information from the credential storage*2 and reset its password.

Protecting the UIM

Some functions provided for convenient use of the FOMA terminal require the security code to use them. Besides the security code for locking the FOMA terminal, the network security code necessary for the network services etc. are available. Make use of the FOMA terminal using an appropriate security code according to the purpose.

■ Notes on the security codes

･ Avoid using a number that is easy to

guess, such as "birth date", "part of your phone number", "street address number or room number", "1111", and "1234". Make sure to make a note of the security code you set lest you should forget it.

･ Be very careful not to let others know

your security code. If your security code is known by anyone else, DOCOMO shall have no liability for any loss due to any unauthorized use of it.

･ If you forget any of your security codes,

you must bring your official identification (such as driver's license), the FOMA terminal, and UIM with you to the nearest docomo Shop. For details, contact the "General Inquiries" on the last page of this manual.

･ The PUK code is written on the

subscription form (copy for customer) handed at the subscription in the docomo Shop. If you did not subscribe other than docomo Shop, you must bring your official identification (such as driver's license), the UIM with you to the nearest docomo Shop or contact the "General Inquiries" on the last page of this manual.

Settings

Network security code

The network security code is a 4-digit number necessary for identification or using the docomo Network Services at reception of your request in docomo Shop or at docomo Information Center. It can be set any number at the subscription and also changed later by yourself. You can change your network security code to the new one using the PC if you have the "docomoID"/"Password" for the "My docomo"* General support site for PC. * For information on "My docomo", see the

previons page of the last page of this manual.

PIN code

You can set a security code called PIN code to the UIM. The code is set to "0000" at the time of subscription. It can be changed by yourself. PIN code is a 4- to 8-digit number (code) that must be entered for user confirmation to prevent unauthorized use by a third party every time you insert the UIM into the FOMA terminal or when the FOMA terminal is powered on. Entering the PIN code enables making/receiving calls and terminal operation.

･ When you purchase a new FOMA terminal

and use the UIM that you have used on the current FOMA terminal by inserting to the new one, use the set PIN code on the former terminal. If you did not change the setting, the code is "0000".

･ If you enter a wrong PIN code 3 times

consecutively, the PIN code is locked and cannot be used anymore. In this case, unlock with "PUK". (P.92)

PUK code

The PUK code is an 8-digit number for canceling the locked PIN1/PIN2 code. The PUK code cannot be changed by yourself. ･ If you enter a wrong PUK code 10 times

consecutively, the UIM is locked. Please contact a docomo Shop.

Enabling the UIM PIN

By setting PIN (security code) and enter PIN1 code when powered on, you can protect the UIM from improper use.

From the Settings screen (P.79),

tap [Location & security] X [Set up SIM card lock] X [Lock SIM card].

Enter the PIN code of the UIM and

tap [OK].

Settings

Entering the PIN code when powered on

On the PIN code entry screen,

enter the PIN code of the UIM.

Tap [OK].

Changing the PIN code

･ You can change the PIN code when the UIM

PIN is enabled.

From the Settings screen (P.79),

tap [Location & security] X [Set up SIM card lock] X [Change SIM PIN].

Enter the current PIN code of the

UIM and tap [OK].

Enter the new PIN code of the UIM

and tap [OK].

Enter the new PIN code and tap

[OK].

Unblocking the locked UIM

On the PUK code entry screen,

enter the PUK code and tap [OK].

Enter the new PIN code of the UIM

and tap [OK].

Enter the new PIN code and tap

[OK].

Screen lock

You can secure your data by requiring a screen unlock pattern every time the FOMA terminal is turned on or every time it is activated from sleep mode. There are 3 types of screen lock settings: "Pattern", "PIN" and "Password". (P.93)

❖Information

･ You can use Key lock (P.30) to prevent unintended

operation or save the power consumption of the FOMA terminal without setting screen lock.

Setting screen unlock pattern

From the Settings screen (P.79),

tap [Location & security] X [Set up screen lock].

Tap [Pattern]/[PIN]/[Password].

･ When you tap [Pattern], follow the

onscreen instructions to enter screen unlock pattern. Set security question and answer in case you forget the pattern.

･ When you tap [PIN], follow the

onscreen instructions to enter 4 or more numbers.

･ When you tap [Password], follow the

onscreen instructions to enter 4 or more characters including alphabets.

Settings

Changing the screen unlock method

From the Settings screen (P.79),

tap [Location & security] X [Change screen lock].

･ Enter current screen unlock pattern,

PIN or password.

･ If you should fail 5 times when you

enter the unlock pattern, wait 30 seconds and then try again.

Tap [Pattern]/[PIN]/[Password].

･ Select items you want to change into.

For setting procedure, see Step 2 (P.93) of "Setting screen unlock pattern".

Locking the screen

Once screen unlock pattern (P.93) is set, keys and screen are locked when the terminal enters in the sleep mode or when p is pressed.

Unlocking the screen

Press y or p to activate the

FOMA terminal.

Unlock the key lock, then enter the

screen unlock pattern.

･ Enter preset screen unlock pattern,

PIN or password.

❖Information

･ Even if you do not unlock the screen lock, you can

make an emergency call from the screen unlocking screen after unlocking the key lock. (P.58)

If you forget how to unlock

■ If you set "Pattern"

"Incorrect pattern" appears when you enter incorrect unlock pattern 5 times consecutively. ･ Tap [ N e x t ] X [Answer question] and

then answer the question that you set the unlock pattern to unlock.

･ If you registered Google account, on the

"Incorrect pattern" screen, tap [Next] X [Enter Google account details], and then enter Google account and password to unlock.

❖Information

･ Tap [Try again] to retry entering pattern in 30

seconds.

･ Alternatively, when you tap [Try again] X [Forgot

pattern?], the question screen that you set unlock pattern appears.

･ You can set multiple Google accounts. To unlock

the screen with Google account and password, enter one of those accounts.

■ If you set "PIN"/"Password"

Please contact a docomo Shop.

Settings

Canceling screen lock

You can cancel screen lock pattern after you set.

From the Settings screen (P.79),

tap [Location & security] X [Change screen lock].

･ Enter preset screen unlock pattern,

PIN or password.

Tap [ N o ne].

Applications

You can set options related to application display and management.

Unknown sources P. 9 5

Manage applications

Running services Display/Manage the currently

Storage use Display size of all applications,

Battery use Display operations which has

Development Set options for application

P. 9 6

running services.

usage condition, etc.

been using the battery.

development.

Permitting downloading unknown source's application

Before you can download unknown source's applications, set the FOMA terminal to enable downloading. Applications you download may be of unknown origin. To protect your FOMA terminal and personal data, only download applications from trusted sources such as the Android Market etc.

From the Settings screen (P.79),

tap [Applications].

Mark [Unknown sources]

checkbox.

Read the cautions appeared, tap

[OK].

Checking downloaded applications

From the Home screen, tap

[Browser]. Press t, tap [More] X

[Downloads].

❖Information

･ Applications downloaded from Android Market do

not appear.

Settings

Managing your applications

You can view installed applications' names, memory usage condition, etc. or change the settings.

Viewing permitted operation of the applications in the FOMA terminal

From the Settings screen (P.79),

tap [Applications] X [Manage applications].

Tap an application to view.

Scroll down the screen to view

permitted operations.

･ If all permitted operations do not

appear, tap [All].

Shutting down an application

A pop-up window that indicates

the application does not reply appears, tap [Force stop].

❖Information

･ If you do not want to shut down the application, tap

[Cancel] and wait for a reply of the application.

❖Note

･ If you cancel the status bar forcibly, operations

may not be performed correctly.

Deleting all data of the application

･ Before deleting all installed application

data, back up contents related to the application that you want to save including data saved in the application.

From the Settings screen (P.79),

tap [Applications] X [Manage applications].

Tap an application to delete the

data.

Tap [Clear data].

Tap [OK].

Deleting an installed application

･ Before deleting installed application, back

up contents related to the application that you want to save including data saved in the application.

･ Some applications cannot be deleted.

From the Settings screen (P.79),

tap [Applications] X [Manage applications].

Tap an application to be deleted.

Tap [Uninstall].

Tap [OK].

Continued on next page

Settings

❖Information

･ You may not uninstall the applications pre-installed

in the FOMA terminal.

Deleting cache of the application

From the Settings screen (P.79),

tap [Applications] X [Manage applications].

Tap an application to delete cache.

Tap [Clear cache].

Keeping the screen on while charging

From the Settings screen (P.79),

tap [Applications] X [Development].

Mark [Stay awake] checkbox.

Accounts & sync

You can manage (add or delete) online service accounts or synchronize contacts, messages, etc. saved in online services with the FOMA terminal.

Background data All the applications installed to

Auto-sync Synchronize online information

Manage accounts P. 9 7

Managing accounts

You can add or delete an online service account.

Setting Google account

You can create a Google account on your FOMA terminal and use Google services such as Gmail, Google Talk, Google Calendar, Android Market, etc. You can set multiple Google accounts on the FOMA terminal.

the FOMA terminal perform automatic data communications.

such as your Gmail, calendar, contacts, etc. automatically. (P.99)

Continued on next page

Settings

From the Settings screen (P.79),

tap [Accounts & sync] X [Add account] X [Google].

Follow the registration wizard, set

a Google account.

･ If you have no Google account, create

an account.

･ If you have already the Google

account, sign in.

❖Information

･ You can use the FOMA terminal without creating

your Google account, however the services such as Google Talk, Gmail, Android Market, etc. are not available.

･ To sign in, you need a Google account and a

password.

･ Make sure to check if the data connection is

available (3G/GPRS) before sign-in to the Google account. For checking the data connection status, see "Status icons" (P.32).

Setting Facebook account

When you register or sign in Facebook, you can synchronize (register/update) profile information published online to Contacts.

❖Information

･ If you do not have a Facebook account, you can

also create a new account at http://www.facebook.com.

From the Settings screen (P.79),

tap [Accounts & sync] X [Add account] X [Facebook].

Enter your login information.

･ If you have no Facebook account,

･ If you have Facebook account, login.

❖Information

･ To display updates of Facebook on the Contacts

screen, from the Settings screen (P.79), tap [Accounts & sync] X [Add account] and register or sign in an account to "Facebook" application.

･ To display updates of Facebook on Timescape,

registering or signing in from Timescape is required. (P.156)

Settings

Docomo SO-01C Instruction Manual

Specifications and Main Features

Frequently Asked Questions

User Manual

Before using the FOMA terminal

About manuals of SO-01C

Accessories and main options

Contents

Contents/Precautions

Safety Precautions (Always follow these directions)

Handling precautions

Part names and functions

Before Using the Handset

microSD card

Charging

Turning power on and off

Initial settings (Setup guide)

Status bar

Notification panel

Notification LED

Basic operations

Home screen

Searching information in the FOMA terminal and web pages

Applications screen

Character entry

Settings of entering characters

Settings of Japanese keyboard

Making/Receiving calls

Calling/Network Services

Call log

Contacts

Network Services

Settings

Viewing the setting menu

Wireless & networks

Call settings

Sound

Display

Location & security

Applications

Accounts & sync