Docomo STYLE N-02A, PRIME series N-01A Instruction Manual

Download

docomo STYLE series

N-02A

ISSUE DATE:

NAME:

‘08.11

Easy Search/Contents/Precautions

Before Using the Handset

Voice/Videophone Calls/PushTalk

Phonebook

Sound/Screen/Light Settings

Security Settings

Mail

i-mode/i-motion/

i-Channel/i-concier

Full Browser/PC Movie

Camera

1Seg

Music

PHONE NUMBER:

MAIL ADDRESS:

INSTRUCTION MANUAL

i-αppli/i-Widget

Osaifu-Keitai/ToruCa

Map/GPS Function

Data Management

Convenient Functions

Character Entry

Network Services

Overseas Use

PC Connection

Appendix/Troubleshooting

Index/Quick Manual

简易手册

簡易手冊

DOCOMO

W-CDMA and GSM/GPRS Systems

Thank you for purchasing “docomo STYLE series N-02A”. Read this manual carefully before use or during operation as well as separate manuals for other components, and use N-02A properly. If you have further questions regarding the contents of the manuals, contact the inquiries number provided on the back of this manual. N-02A is your useful partner. Take good care of it for so long a period.

Notes on use

● FOMA terminals use wireless communications and cannot be used in tunnels, underground areas,

buildings, and other areas without reception; in outdoor locations with weak reception; or outside the service area. Reception may also be weak in even some unobstructed upper floors of high-rise buildings and apartments. Please be aware that calls or communications may be disconnected even under optimal conditions when reception is strong and all three antenna marks are displayed, and when in a stationary position.

● Please be careful not to disturb people around you when using your FOMA terminal in public places,

crowded areas, or quiet locations.

● A third party may be able to use special equipment to listen in on your calls, as FOMA terminals use radio

waves. However, W-CDMA and GSM/GPRS automatically support privacy protection with a scrambling function for all calls to make conversations incomprehensive to third parties.

● FOMA terminals convert voice into digital signals for wireless communications, and therefore if you are in an

area where radio reception is weak, these signals may not be properly reconverted and this may result in distortion of the caller’s voice.

● The user hereby agrees that the user shall be solely responsible for the result of the use of SSL/TLS.

Neither DOCOMO nor the certifier as listed herein makes any representation or warranty as for security in the use of SSL/TLS. In the event that the user shall sustain damage or loss due to the use of SSL/TLS, neither DOCOMO nor the certifier shall be responsible for any damage or loss. Certifier: VeriSign Japan K.K., Cybertrust Co., Ltd., GlobalSign K.K., RSA Security Inc., SECOM Trust Systems Co., Ltd. and Comodo CA Ltd.

● This FOMA terminal is available for use in the FOMA Plus-Area and FOMA High-speed area.

● The FOMA terminal can be used only via the FOMA network provided by DOCOMO and DOCOMO’s

roaming area.

● Please keep a separate record of the information (Phonebook, Schedule, Text memo, Record message,

Voice memo or VP message) you have registered in your FOMA terminal. Please be aware that DOCOMO bears no obligation or responsibility in the event that data is altered or lost.

● It is recommended that you back up important data to a microSD card. If you own a PC, you can also

transfer and save data, such as Phonebook, Mail or Schedule, to your PC using DOCOMO keitai datalink.

Before using this manual

This FOMA terminal supports Kisekae Tool (p.119). When you use Kisekae Tool to change the menu display design, the menu structure may change in accordance with the frequency of use. Also, you cannot access some functions entering the menu number assigned to the functions.

You can download the latest manual information from the NTT DOCOMO Website.

・“User‘s Manual Download”

http://www.nttdocomo.co.jp/english/support/manual/index.html

* The URL and content may change without prior notice.

How to Use This Manual

In this manual, the following methods are available to find the descriptions of functions and services.

Index

You can find keywords and functions displayed on the

display of the FOMA terminal.

Easy Search

You can find often-used functions and convenient functions

in simple terms.

Index on the front cover

You can find the table of contents for each chapter by

using the Index on the front cover.

Contents

You can find descriptions using the Table of Contents which is divided by the function.

Main Functions

You can find main functions of N-02A, such as new functions and convenient functions.

Menu Function List

You can find menu displayed on the display of N-02A and default settings.

Quick Manual

You can find brief descriptions of the basic functions. You can also remove the pages to take along. Take Quick Manual (For Overseas Use) when using your FOMA terminal abroad. Quick Manual Chinese (Simplified/Traditional) version is provided.

p.506

p.4

Cover

p.6

p.8

p.440

p.520

See the next page for details.

z In this “N-02A INSTRUCTION MANUAL”, “N-02A” is described as the “FOMA terminal.” z This manual describes functions that use a microSD card. To use these functions, a microSD card is

required. microSD Card→ p.337

z Subscribers are prohibited from reprinting the content of this manual in whole or in part without

permission.

z The content of this manual may change without prior notification. z The color pattern and screen of the main menu are described when the phone color is Sparkle White.

The main menu is described as “Standard.”

How to Use This Manual (continued)

Following example shows how to look up the alarm function using “Index”, “Easy Search” and “Index on the front cover”.

Index

p.506

You can find keywords and functions displayed on the display of the FOMA terminal.

Activate i-αppli from ToruCa. . . . .286

Activate i-αppli via Bar code reader

Activate i-αppli via infrared data exchange

Add

PushTalk phonebook . . . . . . . . .77

Add address to phonebook . . . . .160

Add bookmark . . . . . . . . . . . . . . .193

Add chat group. . . . . . . . . . . . . . .181

Add phone number/mail address to

phonebook. . . . . . . . . . . . . . . . . .191

Easy Search

Priority . . . . . . . . . . . . . . . . . . .377

. .286

Quality . . . . . . . . . . . . . . . . . . . 100

. .286

Reconnect . . . . . . . . . . . . . . . . . 60

Alarm notification action . . . 376, 383

Alarm setting . . . . . . . . . . . . . . . .376

Alarm (pre-installed) . . . . . . . . . . . 96

Alarm (timer) . . . . . . . . . . . . . . . .370

Album Viewer . . . . . . . . . . . . . . . 322

Animation (create). . . . . . . . . . . . 321

Animation (play) . . . . . . . . . . . . .322

p.4

Auto answer setting . . . . . . . . . . 387

Auto continuous mode . . . . . . . . 230

Auto Deco-mail. . . . . . . . . . . . . . 150

Auto focus. . . . . . . . . . . . . . . . . . 227

Auto manner mode. . . . . . . . . . . 102

Auto power ON/OFF. . . . . . . . . . 369

Auto receive mail . . . . . . . . . . . . 156

Auto redial as voice . . . . . . . . . . . 69

Auto reset total cost . . . . . . . . . . 383

Auto save set (Movie). . . . . . . . . 234

You can find often-used functions and convenient functions in simple terms.

GPS function

p.370

p.299

p.337

Alarm

p.384

p.481

Calculator

p.425

Software Update

p.487

Scanning function

Cover

Infrared data exchange/iC communication

p.351

p.356

OBEX™

Use GPS function

・

Use microSD card

・

Exchange information with PC or other FOMA terminal

・

Use alarm

・

Use as calculator

・

Use FOMA terminal overseas

・

Update software

・

Update security settings

・

Index on the front cover

Refer to “Cover”, “Chapter title page” and “Description pages” sequentially to

ﬁnd the descriptions of the function you want to set. You can ﬁnd the detailed

table of contents on the chapter title page.

Map/GPS Function

INSTRUCTION MANUAL

Data Management

Convenient Functions

Character Entry

Convenient Functions

Multiaccess... ................................................................................................. 366

Multitask....................................... ...................................................................... 367

Viewing Data in Chronological Order.................................................... 368

Turning Power On/Off Automatically .................................................. 369

Checking Network Status ...................................................... ................... 369

Changing the Shortcut Function of the Channel Key.................................. 369

Sorting the Main Menu ................ ................................................................................... 370

Using the Alarm Function ................................................................. ..................... 370

Managing Schedule... ....................................................................................... 371

* The page numbers in these examples may differ from the actual ones in this manual.

Multiaccess

Multitask

Life history viewer

Auto power ON/OFF

Network status

ch-key setting

Alarm

Schedule

This manual uses illustrations and marks to explain how to operate the function so that you can use the FOMA terminal correctly.

Describes the function name.

Using the Alarm Function

Describes the operation on each step.

Describes the screen at the time of the operation. Compare it with the screen when you operate.

Describes the items displayed on the screen (some items cannot be operated depending on the operation).

Describes the explanation of each item.

z The screens shown as examples in this manual are those displayed when “English” is set for “ バイリンガル”

(Select language). Set “English” for “ バイリンガル” (Select language) in advance. →p. 44

z In this manual, “Stand-by display” is set to “OFF”, the background color is white and the font color is black in

order to see the screens clearly. The close-up of some parts of the screens may be used if necessary.

z In this manual, descriptions are basically based on the default settings, and the screens may differ from the

descriptions in this manual.

z The screens in this manual are for reference only, and may look different from the actual ones. z In this manual, the “Osaifu-Keitai i-αppli compatible with the IC card function” is described as the

“Osaifu-Keitai i-αppli”.

z Simple key illustrations are used to show key press operations.

Up to 10 alarms can be added.

i “LifeKit” “Alarm”

■ To switch on/off without

changing the current settings

Highlight an alarm

p (ON/OFF) “ON” and “OFF” toggle each time you press p.

■ To check the current

settings

Select a setting item

Highlight an item to set

o (Edit)

Select any item:

Edit title

Time setting……Enter time to sound an alarm.

Repeat……Select 1 time/Daily ( )/Select

day ( ).

Alarm tone……Select an alarm tone from the

clock alarm tone, melody, i-motion or music folder.

Volu me……Use c to adjust the al arm volume.

Illumination……Select a flashing color for

illumination.

Pattern……Select a flashing patter n for

illumination.

* The contents above differ from the actual ones in this manual.

Alarm list

Function menu p.370

Alarm detail

Function menu p.370

Snooze setting……Set whether to use a

snooze (repeating) alarm.

<Alarm>

ON……Enter the number of times to ring (01 to

10 times) and the ringing interval (01 to 10 minutes). The alarm tone (about 1 minute) rings repeatedly for the set number of times at set interval.

OFF……Enter the ringing time (01 to

10 minutes). The alarm tone keeps sounding for the specified duration.

Auto power ON……Set whether to

automatically power on at the alarm time.

o (Finish)

When PIN1 code entry set is set to ON and the power is automatically turned on to sound an alarm, the Alarm Tone sounds even if a melody, i-motion or song downloaded from sites is set as an alarm tone. Set “Auto power ON” to “OFF” and then turn off your FOMA terminal near electronic equipment that contains high-precision mechanisms or handles delicate signals, or inside an airplane, hospital, or other area where use is prohibited.

Alarm list screen (p.370)/Alarm detail screen (p.370)

Edit

Display detail*……Display the alarm content.

Finish (Set this)……Activate an alarm.

Release this……Release an alarm.

Release all……Release all set alarms.

*: Available only on the alarm list screen.

Continued on next page

370

Describes the necessary settings, notes or useful information about the function.

The function menu title is described with the icon of the function menu and the screen name on which the function menu is displayed.

Indicates that the

snoitcnuF tneinevnoC

descriptions go on to the next page.

Page number

You can search the chapters using the index.

Easy Search

Easy Search/Contents/Precautions

Find out a function with easy words from the Easy Search index below.

Useful functions for talking

Caller ID Notification

・Show/Hide caller ID ・Switch voice/videophone call during call ・Adjust the volume during a call ・Hold the current call

p.46

p.64

Holding

p.63

p.51

Volume

When you cannot answer incoming call

On hold

・Hold the ringing call without answering

p.64

・Notify that you cannot answer the call

Public mode (Driving mode) Public mode (Power OFF)

p.64 p.65

Have your party record voice/videophone message

・

p.67

Record message

Change melody or illumination

Ring volume

p.96

p.101

p.99

p.63

Select ring tone

Keypad sound

Manner mode

p.91

Ring tone/Image

p.98

p.111

Vibrator

p.110

Key illumination

Illumination

・Adjust the ring volume ・Set ring tone to specify party ・Change ring tone

Set vibration to notify incoming call or mail

・・Mute keypad tone ・Set silent mode ・Change color or pattern of incoming call lamp ・Change key illumination flashing pattern

Change/understand display

・Mark (icon) on the display ・Switch menu display

Change standby screen (wallpaper)

・

p.32

p.24

Simple Menu

・Display calendar on the standby screen ・Change font size

p.113

Font

View display

p.104

Display setting

p.106

Master mail

Deco-mail

・Send Deco-mail ・Send image or melody ・Sor t and save mail automatically

p.148

p.153

Attach file

p.168

Auto-sort

Master camera

Change the size of image to shoot

・

Display the shot

・

Save image on the microSD card

・

p.316

My picture

p.225

p.342

Use your phone without worries

p.123

Lock the FOMA terminal from remote location when the FOMA terminal is lost

・

p.125

Prevent others from viewing the phonebook

・

Reject unidentified calls

・

Reject calls from callers who are not stored in phonebook

・

Save data such as phonebook in case of loss of data

・

*1: Omakase Lock is a pay service. *2: Data Security Service is a pay service you need to apply for. (i-mode subscription is necessary to apply for this service.)

p.137

Call setting w/o ID

Secret mode/Secret data only mode

p.138

p.139

Data Security Service*

Omakase Lock*

Reject unknown

Master 1Seg

Activate 1Seg

・Watch 1Seg ・Record 1Seg programs

Book programs for 1Seg watching/timer recording

・

p.246

p.251

1Seg recording

Booking program list/Timer recording list

p.252

Easy Search/Contents/Precautions

Miscellaneous

Backlight (ECO mode)

p.370

p.107

Music&Video Channel/Music Playback

p.255

GPS function

p.299

p.337

Alarm

Calculator

p.384

Software Update

p.481

p.487

p.236

p.425

Bar code reader

Scanning function

Infrared data exchange/iC communication

p.351

p.356

OBEX™

Save battery life

・

Read QR code or bar code

・

Listen to music

・

Use GPS function

・

Use microSD card

・

Exchange information with PC or other FOMA terminal

・

Use alarm

・

Use as calculator

・

Use FOMA terminal overseas

・

Update software

・

Update security settings

・

For more information about other operation guides, see “How to Use This Manual.”→ p.1 Also, the “Quick Manual” offers instructions to often-used functions.→p.520

Easy Search/Contents/Precautions

How to Use This Manual.........................................................1

Easy Search ...........................................................................4

Contents .................................................................................6

Main Features of N-02A .........................................................8

Precautions...........................................................................10

Notes on Handling ................................................................16

Package Contents ................................................................19

Before Using the Handset

p.21

Voice/Videophone Calls/PushTalk

p.47

Phonebook

p.83

Sound/Screen/ Light Settings

p.95

Security Settings

p.121

Mail

p.145

i-mode/i-motion/ i-Channel/i-concier

p.185

Full Browser/ PC Movie

p.211

Camera

p.221

aPart names and functions aViewing the display aSelecting the menu aBasic operations aFOMA card (UIM) aAttaching/Removing the battery pack aCharging aTurning the power on aInitial settings aTime settings aCaller ID notification, etc.

aMaking a voice/videophone call aSwitching between voice and videophone call aHandsfree aRedial/Received calls aChaku-moji aWORLD CALL aReceiving a voice/videophone call aVolume aRing volume aOn hold aPublic mode (Driving mode/Power OFF) aRecord message aVideophone settings aRemote monitoring aMaking/Receiving a PushTalk call aPushTalk phonebook aPushTalk setting, etc.

aAdd to phonebook aGroup setting aSearch phonebook aEditing/Deleting phonebook entries aRing tone/Image aChoku-den, etc.

aRing tone aVibrator aManner mode aDisplay setting aPrivacy angle aBacklight aDisplay design aMenu display set aIndicator display aIllumination aMachi-chara setting aKisekae Tool, etc.

aSecurity code aPIN code aDial lock aOmakase Lock aSecret mode aSecret folder aOriginal lock aKeypad lock aIC card authentication aFace authentication aSidekey operation aSelf mode aReset settings aInitialize, etc.

aComposing/Sending i-mode mail aDeco-mail/Auto Deco-mail aAttaching files aReceiving mails aChecking new messages aReplying/Forwarding mails aSaving attached files aUsing mail boxes aMail Setting aMessage services aEarly Warning “Area Mail” aChat mail aSMS, etc.

aViewing sites aViewing and using sites aQuick Search ai-mode password aInternet connection aBookmarks aPhone To/AV Phone To, Mail To, Web To and Media To aDownloading i-motion aUsing i-Channel aUsing i-concier, etc.

aDisplaying websites designed for PC aOperation for the Full Browser screen aFull Browser settings aPC movies, etc.

aPhoto mode aMovie mode aShooting settings aBar code reader aText reader, etc.

1Seg

p.243

Music

p.255

i-αppli/i-Widget

p.271

Osaifu-Keitai/ ToruCa

p.291

Map/GPS Function

p.299

Data Management

p.313

Convenient Functions

p.365

Character Entry

p.395

Network Services

p.411

Overseas Use

p.425

PC Connection

p.433

Appendix/ Troubleshooting

p.439

Index/Quick Manual

p.505

aSetting channels aWatching 1Seg programs aData broadcast a1Seg recording aBooking program/Timer recording a1Seg settings, etc.

, etc.

aMusic&Video Channel aDownloading Chaku-Uta-Full aPlaying music aUsing playlist aUsing the Music Player, etc.

* “Chaku-Uta-Full” is a registered trademark of Sony Music

Entertainment (Japan) Inc.

aDownloading i-αppli aStarting i-αppli aPre-installed software ai-αppli standby screen aUpgrading i-αppli aUsing i-Widget, etc.

aiC transfer service aOsaifu-Keitai aIC card lock setting aReceiving ToruCa aDisplaying ToruCa, etc.

aChecking the current location aUsing Map/GPS αppli aProviding location information aNotifying the current location aLocation history, etc.

aData box aStill image aMovie/i-motion aPlaying videos aChara-den aMachi-chara aMelody aKisekae Tool aKey illumination amicroSD card aMovable contents aUIM operation aInfrared data exchange/IrSS™ communications/iC communication aViewing PDF data aViewing documents aViewing e-books/e-comic, etc.

aMulti access aMultitask aLife history viewer aAlarm aSchedule aTo Do list aAlarm settings aMy profile aChecking call data aCalculator aText memo aDictionary

aEarphone/Microphone with switch aBluetooth

aText entry a5-touch aCommon phrases aCopying/Cutting/Pasting text aOwn dictionary aClear learned aDownload dictionary a2-touch aT9 input aSetting/Entering Chinese, etc.

aVoice Mail service aCall Waiting aCall Forwarding service aNuisance Call Blocking service aCaller ID Request service aDual Network service a2in1, etc.

aWORLD WING aServices available overseas aBefore overseas use aMaking/Receiving a call in the country of stay aNW search mode, etc.

aData communication, etc.

* The details are described in “Manual for PC Connection” (PDF

format) in the provided CD-ROM.

aMenu list aList of characters assigned to dial keys aList of readings for Symbols/Pictograms/Face marks aMulti access/Multitask combinations aOptions/Accessories aTroubleshooting aError messages aSoftware Update aMain specifications, etc.

aIndex aQuick Manual English version (Domestic/Overseas) aQuick Manual Chinese (Simplified/Traditional) version (Domestic/

Overseas)

Easy Search/Contents/Precautions

Main Features of N-02A

Easy Search/Contents/Precautions

■ i-concier →p.206

i-concier is a service where Machi-chara (character on the standby screen) delivers useful information. Also, download schedules (i-schedule) from sites to make better use of the service. Downloaded i-schedule or ToruCa is automatically updated. Shop or company addresses are automatically added to the phonebook.

■ i-αppli call →p.284

i-αppli call is a useful function that allows you to prompt a third party or content provider to start a specified application, e.g. the other party’s application when playing games with the other party.

■ i-Widget →p.288

i-Widget is a useful function that allows you to quickly access often-used contents and tools (Widget appli) such as Calculator, Clock, Program guide and stock prices. Simply open the i-Widget screen to instantly view the latest information.

■ 1Seg →p.244

View mobile digital terrestrial broadcasting “1Seg”. You can record still image/video while viewing 1Seg.

■ International roaming →pp.278, 426

The FOMA terminal, phone number and mail address you use in Japan are also available for use overseas (in GSM and 3G areas). You can use voice call, videophone call, i-mode, i-mode mail, SMS and network services. “日英版しゃべって翻訳 for N”, which translates between Japanese and English speech, is preinstalled. The Chinese version “日中版しゃべって翻訳 for N” is also pre-installed.

■ Bluetooth →p.388

Connect the FOMA terminal to a Bluetooth device wirelessly to make calls or play music or 1Seg audio even while the FOMA terminal is in a bag, etc.

■ Key illumination supported

Enjoy key illumination when opening the FOMA terminal or when the stored birthday comes. Key illumination can link to emotion-expressing mail. You can change the key backlight color.

→pp.111, 112

■ Chinese text entry supported

→pp.406, 520

You can display/enter Chinese (Simplified/Traditional) in i-mode mail/SMS, on the i-mode/Full Browser site screen, etc. To enter Chinese text, set “Chinese setting” to “ON” beforehand. Quick Manual Chinese (Simplified/Traditional) version is provided at the end of this manual.

■ 3.2 inch Full Wide VGA LCD

With a full wide LCD (480 × 854 dots), you can enjoy 1Seg images and images captured with the camera.

■ Camera equipped with Digital

Anti-Shake/Face Detection/Panorama shooting features →p.221

• The CMOS (rear camera), with effective 5.2 mega

pixels, enables you to capture high resolution images of 5M bytes (1,944 × 2,592 dots).

• The camera is equipped with Digital Anti-Shake

feature. You can easily capture clear images in dark places or videos that are difficult to stabilize. Also, the face detection function enables you to automatically capture images immediately after detecting the subjects’ smiles.

• Connect overlapping images into a single picture

using the panorama mode.

■ iC communication →p.355

You can exchange data by aligning FeliCa marks (e) of sending and receiving FOMA terminals to each other.

■ Music Player →p.266

By converting tracks on a music CD to WMA (Windows Media Audio) or SD-Audio data in your PC and saving to a microSD card, you can play the tracks on your FOMA terminal with the card inserted.

■ IC card authentication →p.133

Instead of entering a security code, aligning your FOMA terminal with a contactless FeliCa IC card performs user authentication to release Dial lock or Keypad lock.

■ Face authentication →p.134

To lock keys or to release IC card lock, you can use face authentication.

■ PDF viewer/Document viewer

→pp.357, 359

• You can easily view useful information in PDF

format such as a map, catalogue or time table on your FOMA terminal.

• The document viewer allows you to open

Microsoft PowerPoint and text files.

Word, Microsoft® Excel, Microsoft®

■ Full Browser → p.211

With the Full Browser, you can view websites intended for computers, which can provide you with more information.

■ Multi window/One-touch multi

window →pp.190, 194

• You can connect to up to 5 sites at a time.

• Switch tabs to view connected pages.

■ Machi-chara→ pp.112, 332

Set a moving character as the standby screen. The character informs you of i-concier information, missed call, new mail, unread mail, etc. Machi-chara can be downloaded from compatible sites.

■ Choku-Den →p.92

By storing frequently used phonebook entries to Choku-Den, you can make a call or send mail quickly. Up to 5 entries can be saved in Choku-Den. When mail addresses are stored, you can compose i-mode mail or chat mail to all the members easily.

■ Auto Deco-mail →p.150

The FOMA terminal detects emotion from the mail text and automatically converts the mail to Deco-mail with suitable decorations such as pictograms.

■ Emotion-expressing mail →p.157

An icon and key illumination express emotion suitable for the content of the received mail.

■ Infrared data exchange/Infrared

remote control →pp.353, 357

You can exchange data with other FOMA terminals using infrared communication. You can also use your FOMA terminal as a remote control.

■ Multi access/Multitask →pp.366, 367

You can use voice call, packet communication and SMS concurrently (Multi access). You can also run multiple applications simultaneously and switch among them (Multitask).

■ Manga&Book →p.362

You can read e-books and e-comics.

■ Bar code reader →p.236

The FOMA terminal can scan bar codes or QR codes. Scanned information can be added to the phonebook or used to compose i-mode mail, etc.

■ Quick Search →p.191

You can easily search for information while viewing i-mode sites, mail, schedule, etc.

■ File upload →p.216

Images or videos of up to 2M bytes can be uploaded to a site.

Easy Search/Contents/Precautions

■ Videophone →p.47

■ Chaku-moji →p.56

■ Kisekae Tool/Direct menu→ p.119

■ Security settings→p.121

■ i-mode mail/Deco-mail/Deco-mail pictogram → pp.146, 147, 148

■ Chaku-Uta-Full

/Uta-hodai/Music&Video Channel/Video clip

→pp.202, 255, 260

■ i-Channel →p.204

■ Mega i-αppli/Chokkan game →p.271

■ Osaifu-Keitai/ToruCa→ pp.280, 291

■ Map/GPS→p.299

■ Network services→p.411

■ 2in1→p.419

■ High-speed communication→p.434

Precautions

(Always follow these directions)

Easy Search/Contents/Precautions

■ To ensure that you use your FOMA terminal

correctly, read “Precautions” carefully before use. Keep this manual after reading for future reference.

■ The precautions must be observed at all

times since they contain information intended to prevent the bodily injury or damage to property.

■ The following symbols indicate the

different degrees of injury and damage that may occur if the information provided is not observed and the FOMA terminal is used incorrectly:

Indicates that death or serious bodily injury may result

DANGER

WARNING

CAUTION

■ The following symbols indicate specific

directions:

Don’t

No disassembly

No wet hands

No liquids

Unplug

directly and immediately from improper use.

Indicates that death or serious bodily injury may result from improper use.

Indicates that bodily injury and/or damage to property may result from improper use.

Indicates that it is prohibited.

Indicates that it must not be disassembled.

Indicates that you must not touch it with wet hands.

Indicates that it must not be used near water, which means that you must not let it become wet.

Indicates that it is an instructionbased compulsory conduct (must be acted).

Indicates that you must unplug the power code from the outlet.

■ Safety Precautions are explained in the

following categories:

1. Precautions for the FOMA Terminal, Battery Pack, Adapter/Charger and FOMA Card

(UIM) (Common) .......................................... 10

2. Precautions for the FOMA Terminal.......... 11

3. Precautions for the Battery Pack .............. 13

4. Precautions for the Adapter/Charger........ 14

5. Precautions for the FOMA Card (UIM) ...... 15

6. Precautions for Use Near Electronic Medical

Devices ........................................................ 15

1. Precautions for the FOMA Terminal, Battery Pack, Adapter/Charger and FOMA Card (UIM) (Common)

DANGER

Do not use, keep or leave the devices in locations subject to high temperatures, such as near fire or heater, in direct

Don’t

sunlight or inside a car on a hot day.

Doing so may cause the battery pack to leak, overheat, explode or ignite, the devices to malfunction or be deformed or suffer performance loss and a reduced operating life. Also, doing so may cause part of the case to become hot and burn your skin.

Do not disassemble, modify or solder the equipment.

Doing so may damage the equipment, or cause

No disassembly

fire, electrical shock or injury (burns, etc.). Doing so may cause the battery to leak, overheat, crack or catch fire.

Do not allow the devices to become wet.

Device contact with liquids, such as water or pet urine, may cause overheating, electric

No liquids

shock, fire, malfunction, injury, etc. Be careful not to use the devices in areas where they could get wet.

Use the battery pack and adapter/ charger specified by NTT DOCOMO for the FOMA terminal.

Third-party products might subject the FOMA terminal, battery pack and other devices to high voltage/current leading to leaking, overheating, crack, fire, or product damage.

Battery Pack N16 Desktop Holder N15 FOMA AC Adapter 01/02 FOMA DC Adapter 01/02 Data Communications Adapter N01 FOMA AC Adapter 01 for Global use FOMA Dry Battery Adapter 01 FOMA USB Cable with Charge Function 01/02 FOMA Portable Charging Adapter 01

* For information on other compatible products,

contact a docomo Shop or ser vice counter.

WARNING

Do not put the battery, FOMA terminal, adapter/charger or FOMA card (UIM) in a microwave oven or pressurized

Don’t

container.

Doing so may cause the battery pack to leak, overheat, explode or ignite, cause the FOMA terminal or adapter/charger to overheat, smoke or ignite, or damage the IC.

Do not throw the FOMA terminal or expose it to strong shocks.

Doing so may cause the battery pack to

Don’t

leak, overheat, explode or ignite, or cause the devices to malfunction or ignite.

Do not place electrically conductive objects (wires, pencil leads, etc.) in contact with the charging terminals or

Don’t

external jacks. Do not insert those materials inside the terminal.

Any of these improper uses might result in a short circuit and damage the equipment or cause fire.

Turn off the FOMA terminal, when you are near a flammable gas such as at a gasoline filling station. Also, do not

charge the device in these locations. Doing so may cause the gas to ignite.

Turn off the power, when you use Osaifukeitai at a gasoline filling station (if the IC card lock is set, turn the power off after the lock is released).

If something unusual happens, such as unusual odor, overheating, discoloration or deformation during

use, charge or storage, be sure to:

1. Unplug the power code from the power outlet or the cigar lighter socket.

2. Turn off the power.

3. Remove the battery pack from the FOMA terminal.

Continuing to use or charge the battery may cause it to overheat, explode, or ignite; or the battery to leak.

CAUTION

Do not leave the FOMA terminal on a slope or unstable surface.

The FOMA terminal may fall and cause

Don’t

injury or malfunction.

Do not leave the devices in humid, dusty or hot places.

Doing so may cause malfunction.

Don’t

If your child uses the FOMA terminal, instruct him/her on how to use it. Make sure that he/she always uses the FOMA

terminal correctly as you instruct.

Improper usage could result in bodily injury.

Keep the FOMA terminal out of young children’s reach.

A young child may try to swallow it or suffer

injury.

Pay special attention when you use the FOMA terminal connected to the adapter/charger for a long period.

If you use i-αppli or videophone or watch 1Seg programs for a long time while charging, the temperature of the FOMA terminal, battery pack or adapter/charger may rise. If you touch the warm part of these devices for a long period of time, it may cause redness, itch, skin irritation or low temperature burns depending on your constitution or physical condition.

2. Precautions for the FOMA Terminal

WARNING

Do not direct the infrared data port towards your or another person’s eyes.

Doing so may cause eye injury. Do not aim

Don’t

or direct the infrared data port towards another infrared device as this may interfere with the operation of the device.

Do not put the FOMA terminal on the dashboard, etc. as a problem may occur due to air bag inflation.

Don’t

An air bag inflation may cause the FOMA terminal to hit you or another person, which may lead to injury, malfunction, breakage, etc.

If you are wearing electronic medical equipment, do not put the FOMA terminal in your breast pocket or in an

Don’t

inside pocket.

Using the FOMA terminal in close proximity to electronic medical equipment may cause the equipment to malfunction.

Do not put fluids such as water or objects such as pieces of metal or flammable materials into the FOMA

Don’t

card (UIM) slot or microSD card slot inside of the FOMA terminal.

Doing so may cause fire, electric shock or malfunction.

Continued on next page

Easy Search/Contents/Precautions

Please turn off your FOMA terminal when inside an airplane, hospital, or other area where use is prohibited.

The device may affect electronic or medical equipment. If the Auto power function is set, make sure to disable the function before turning off the power. Follow the instructions provided by the medical facility for the use of mobile phones. Use of the phone in an airplane is prohibited, and may be punishable by law.

Make sure to hold the FOMA terminal at a safe distance from your ear when you use the handsfree mode. Also,

when you play games or music with an earphone/microphone connected to the FOMA terminal, adjust the volume properly.

Too large a volume may lead to defective hearing. Also, hearing difficulties may cause an accident.

If you have a weak heart, take precautions when setting the Vibrator or Ring volume.

Sudden loud sounds or vibrations may affect your heart.

If you see lightning or hear thunder while using outdoors, immediately turn off the power and take shelter in a

safe place.

There is a risk of being struck by lightning and suffering electric shock.

Please turn off the power near electronic equipment that contains high-precision mechanisms or

handles delicate signals.

The terminal may interfere with the operation of sensitive electronic equipment.

* Electronic equipment to watch out for: Hearing aids, implanted cardiac pacemakers, and other electronic medical devices; fire alarms, automatic doors, and other automatically controlled apparatus. Users of implanted cardiac pacemakers, ICDs, and other electronic medical devices are advised to ask the manufacturer or sales agent whether or not these devices can be affected by radio waves.

If the display or camera lens is broken, be careful with the broken glass and any exposed FOMA terminal parts.

The display and camera lens surfaces are covered by plastic to minimize the possibility of glass scattering. However, touching broken or exposed parts may cause injury.

CAUTION

Do not swing the FOMA terminal by its strap or other parts.

The FOMA terminal may strike you or others

Don’t

around you, resulting in bodily injury, malfunction or damage to the FOMA terminal or other property.

When using motion tracking, make sure you are in a safe place, hold the FOMA terminal securely, and do not

Don’t

shake it more than necessary.

Motion tracking is a function that works by tilting or shaking the FOMA terminal. The FOMA terminal may hit people or objects if shaken too much, causing serious accidents, damage, etc.

Do not hit other people with metallic straps, etc. of the FOMA terminal while using motion tracking.

Don’t

Failure to observe this precaution may result in injury, malfunction or breakage.

Do not let magnetic cards, etc. come close to or be sandwiched between FOMA terminal parts.

Don’t

The magnetic data in cash cards, credit cards, telephone cards, floppy disks, etc. may be erased.

Do not bring strong magnetic objects close to the FOMA terminal.

Strong magnetic objects may cause

Don’t

misoperation.

If the display is broken and the liquid crystal leaks, do not lick, swallow, or touch it.

Don’t

If the liquid crystal comes into your eyes or mouth, immediately rinse with clean water and see a doctor. If the liquid crystal adheres to your skin or clothing, immediately wipe it off with alcohol and wash with soap and water.

Failure to observe these precautions may cause loss of eyesight or damage to your skin.

When a ring tone or melody is played, do not put the speaker close to your ear.

Don’t

Doing so may lead to defective hearing.

In some types of vehicle, using the FOMA terminal may interfere with the operation of the vehicle’s electronic

equipment.

Do not use the FOMA terminal if doing so may impair safe driving.

There may be cases where the customer’s physical condition or predisposition leads to itchiness,

rashes, or sores. If this occurs, immediately stop using the FOMA terminal and see a doctor. Metal components are used in the following parts:

Parts Material Coating

Phosphor bronze

Polycarbonate

Charging terminal (Connector for desktop holder)

LCD rear case

Illumination lens

Multi function key

*1 : Phone color: Ash Gray, Antique Gold. *2 : Phone color: Sparkle White. *3 : Phone color: Ash Gray, Antique Gold, Air Blue.

Gold plating

Tin deposition + UV coating

Ceramic deposition + UV coating or Tin deposition + UV coating

Aluminum deposition + UV coating

Take care not to pinch your fingers or the strap when opening/closing the FOMA terminal.

Such pinching may cause injury or breakage.

When viewing 1Seg, keep a proper distance between your eyes and the display in a bright place.

Failure to observe this precaution may impair your vision.

3. Precautions for the Battery Pack

■ Refer to the information shown on

the battery pack label to check the type of battery pack.

Display Battery type

Li-ion00 Lithium-ion

Easy Search/Contents/Precautions

DANGER

Do not place metal items such as wires in contact with the charging terminals. Also, do not carry or store

Don’t

the battery with metal items such as necklaces.

Doing so may cause the battery pack to leak, overheat, explode or ignite.

If you have difficulty attaching the battery pack to the FOMA terminal, do not put excessive pressure on the

Don’t

battery. Check the orientation of the battery pack before attaching it.

Failure to observe these precautions may cause the battery pack to leak, overheat, explode or ignite.

Do not throw the battery pack into fire.

Doing so may cause the battery pack to leak, overheat, explode or ignite.

Don’t

Do not puncture the battery pack, hit it with a hammer or step on it.

Doing so may cause the battery pack to

Don’t

leak, overheat, explode or ignite.

If battery fluid comes into contact with your eyes, do not rub your eyes but immediately rinse your eyes with

clean water and see a doctor.

Failure to do so may result in loss of eyesight.

WARNING

If a battery has been subjected to strong impact and something

Easy Search/Contents/Precautions

abnormal such as deformation,

Don’t

damage, stop using it immediately.

Continued use may cause the battery pack to leak, overheat, explode or ignite, or cause the devices to malfunction or ignite.

If the battery is not fully charged after the specified charging time has elapsed, stop charging.

Continued charging may cause the battery pack to leak, overheat, explode or ignite.

If the battery pack leaks or emits an unusual odor, stop using it immediately and move it away from

any flame or fire.

The battery fluid is flammable and could ignite, causing a fire or explosion.

Keep your pets away from the battery pack as they may accidentally bite it.

Failure to observe this precaution may cause

the battery pack to leak, overheat, explode or ignite, or cause the devices to malfunction or ignite.

CAUTION

Do not dispose of used battery packs with ordinary garbage.

Doing so may cause fire and create an

Don’t

environmental hazard. Put insulation tape on the terminals of a used battery pack and return it to a docomo Shop or service counter, or dispose of the battery pack in accordance with your local regulations.

Do not charge a wet battery pack.

Doing so may cause the battery pack to overheat, ignite, or explode.

Don’t

If battery fluid comes into contact with your skin or clothing, stop using it immediately and rinse with clean water.

Battery fluid is harmful to your skin.

4. Precautions for the Adapter/ Charger

WARNING

Do not use the adapter/charger if the power cord is damaged.

Doing so may cause electric shock,

Don’t

overheating or fire.

Do not use the AC adapter or desktop holder in humid locations such as a bathroom.

Don’t

Doing so may cause electric shock.

The DC adapter must be used only in vehicles with a negative ground. Do not use the adapter in vehicles with a

Don’t

positive ground.

Doing so may cause fire.

Do not touch the FOMA terminal or adapter/charger when you see lightning or hear thunder.

Don’t

There is a risk of being struck by lightning and suffering electric shock.

Do not short-circuit the charging terminals when the adapter or charger is plugged into a power outlet or

Don’t

cigarette lighter socket. Also, do not let the charging terminals contact with your body (hand, finger, etc.).

Doing so may cause fire, malfunction, electric shock or injury.

Place the charger or desktop holder on a stable surface during charging. Also, do not cover or wrap the charger

Don’t

or desktop holder with clothing or bedding.

This may cause the FOMA terminal to fall out of the charger or heat to build up, resulting in a fire or malfunction.

Do not put heavy objects on the power cord of the adapter/charger.

Doing so may cause electric shock or fire.

Don’t

Do not touch the power cords of the adapter/charger or the power outlet with wet hands.

No wet hands

Doing so may cause electric shock.

Use the specified voltage and current.

Using the adapters with incorrect voltage may cause fire or malfunction. Use the AC

Adapter for Global Use to charge the battery overseas. AC Adapter: AC 100V DC Adapter:

DC12V/24V (specific to vehicle with negative ground)

AC Adapter for Global Use:

AC100V to 240V (specific to vehicle with negative ground)

If the fuse in the DC adapter blows, always replace it with the specified type of fuse.

Using the unspecified fuse may cause fire or malfunction. Refer to the respective manuals for the information on the specified fuse.

Wipe off any dust on the plug.

Failure to observe this precaution may cause fire.

When plugging the AC adapter into a power outlet, make sure that no metallic straps or other metallic

objects are caught between the plug and the socket.

Metallic objects may cause electric shock, short-circuit or fire.

Always grasp the plug when unplugging the adapter or charger from the power outlet or cigarette

lighter socket. Do not pull the cord itself.

Pulling the cord may damage the cord and cause electric shock or fire.

Unplug the power code from the power outlet when the charger will be left unused for a long period.

Unplug

Failure to observe this precaution may cause electrical shock, fire or malfunction.

If water or other liquid gets into the adapter or charger, immediately unplug it from the power outlet or

Unplug

socket.

Failure to observe this precaution may cause an electric shock, smoke emission or fire.

Unplug the adapter or charger from the power outlet or cigarette lighter socket before cleaning it.

Unplug

Failure to observe this precaution may cause electric shock.

5. Precautions for the FOMA Card (UIM)

CAUTION

Be careful with sharp edges when removing the FOMA card (UIM) (IC part).

Sharp edges may injure your hands or fingers.

6. Precautions for Use Near Electronic Medical Devices

■ According to the Guidelines on the

Use of Radiocommunication Equipment such as Cellular Telephones - Safeguards for Electronic Medical Equipment established by the Electromagnetic Compatibility Conference Japan.

WARNING

Take care of the following inside hospitals:

a Do not take your FOMA terminal into an

operating room, intensive care unit (ICU), or coronary care unit (CCU).

a Turn off power inside hospital wards. a Turn off power even in hospital lobbies,

waiting rooms, and corridors if electronic medical devices may be in use near you.

a For use inside medical institutions, please

follow the instructions given at individual locations.

a If the Auto power function is set, make

sure to disable the function before turning off the power.

Turn off the power in crowded places such as peak-hour trains if implanted electronic medical devices may be in

use near you.

Radio waves emitted by the FOMA terminal may adversely affect implanted pacemakers and ICDs when used in close proximity.

A person with an implantable cardiac pacemaker or defibrillator should use or carry the FOMA terminal at a

distance more than 22 cm from the site of implantation.

Radio waves emitted by the FOMA terminal may adversely affect implanted pacemakers and ICDs when used in close proximity.

Electronic medical devices other than implanted pacemakers and ICDs may also be used outside hospitals. Users

of electronic medical devices are advised to ask the manufacturer whether these instruments can be affected by radio waves.

Radio waves from the FOMA terminal can adversely affect electronic medical devices.

Easy Search/Contents/Precautions

Notes on Handling

General Notes

c Do not allow the devices to become wet.

Easy Search/Contents/Precautions

The FOMA terminal, battery pack, adapter/charger and the FOMA card (UIM) are not waterproof. Do not use them in humid locations such as bathrooms, and avoid exposing them to rain. If you carry the FOMA terminal close to your skin, sweat may cause internal components to corrode and result in malfunction. The FOMA terminal cannot be repaired in the following cases: the water exposure detection sticker shows water exposure; tests determine that corrosion has occurred due to water exposure, condensation, or perspiration. These cases are not covered by the warranty, and any repairs that may be possible will be carried out at the subscriber’s expense.

c Wipe with a soft, dry cloth (such as a cloth

designed for glasses).

aThe surface of the FOMA terminal LCD may be

coated to improve the visibility of the color display. Rubbing the LCD of the FOMA terminal with a dry cloth to clean it may scratch the LCD surface. Handle the FOMA terminal carefully and clean it using a soft dry cloth (such as a cloth used for glasses). The LCD coating may peel off or stain if moisture or dirt is left on the surface for a long period.

aNever use chemicals such as alcohol, thinners,

benzene or detergents as these agents may erase the printing on the FOMA terminal or cause discoloration.

c Occasionally clean the connection

terminals with a dry cotton bud.

Soiled connection terminals may result in poor connections and loss of power. Also, as it may cause insufficient charging, clean the terminal with a dry cloth or cotton bud when it is dirty.

c Do not place the FOMA terminal near an air

conditioning vent.

Condensation may form due to rapid changes in temperature, and this may cause internal corrosion and malfunction.

c Do not throw strike or put excessive

pressure on the FOMA terminal or battery.

Do not put the FOMA terminal in a bag filled with many objects or sit down with it in a hip pocket. Excessive pressure may result in malfunction or damage to the LCD, internal circuit or the battery pack. Also, if an external device is connected to the external connector, excessive pressure may cause connector breakage or malfunction.

c Read the separate manuals supplied with

the FOMA terminal, adapter/charger and desktop holder carefully.

c Do not scratch the display with metallic

objects.

Doing so may cause scratches, malfunction or damage.

Handling the FOMA Terminal

c Avoid using the FOMA terminal in extremely

high or low temperatures.

The ambient temperature of the room should be 5°C - 35°C with humidity 45% - 85%.

c Reception may be affected if you use your

FOMA terminal near a landline phone, television, or radio in use. Use the FOMA terminal away from such devices.

c Please keep a separate record of the

information you have registered in your FOMA terminal.

Please be aware that DOCOMO bears no obligation or responsibility in the event that data is altered or lost.

c When connecting an external device to the

external connector (earphone/microphone terminal), do not insert at an angle or pull the code.

Doing so may cause malfunction or damage.

c Do not fold the FOMA terminal with the

strap pinched between the folding parts.

Doing so may cause malfunction or damage.

c It is normal for the FOMA terminal to

become warm while being used or charged. This is not a malfunction. Keep using it.

c Do not leave the camera exposed to direct

sunlight.

Doing so may discolor or burn the components of the camera.

c Keep the external connector cap and

microSD card slot cap closed when not in use.

Failure to observe this precaution may cause malfunction due to dust or water getting in.

c Do not use FOMA terminal with the back

cover removed.

Doing so may cause the battery pack to fall out, or cause malfunction or damage.

c Do not put an extremely-thick sticker, etc.

on the display, keys or keypads.

Doing so may cause malfunction.

c Do not remove the microSD card or turn off

the power while in use.

Doing so may cause data loss or malfunction.

Handling the Battery Pack

c The battery pack is consumable.

Battery life varies depending on usage conditions, etc., but it is time to change battery packs when the usage time has become extremely short even though the battery pack has been fully recharged. In this case, please purchase a new battery pack.

c The ambient temperature of the room

should be 5°C - 35°C.

c Make sure to charge the battery when you

use the FOMA terminal for the first time or if you have not used it for a long period of time.

c The available operating time of the battery

pack depends on the conditions of usage and battery pack.

c Depending on the usage condition, the

battery pack may inflate slightly when the battery life is almost over. This is not a malfunction.

c Do not keep or leave an empty battery pack.

The performance and life of the battery pack may deteriorate.

Handling the Adapter/Charger

c The ambient temperature of the room

should be 5°C - 35°C.

c Do not charge the battery pack:

aIn a humid, dusty or unstable place aNear a landline phone, TV or radio

c It is normal that the adapter/charger

become warm while charging. Keep using it.

c Do not use the DC adapter to charge the

battery when the car engine is not running.

Doing so may drain the car battery.

c If you use an electrical outlet with an

unplugging-protection mechanism, follow the instructions of the manual for the outlet.

c Do not expose the adapter/charger to

strong shocks. Do not deform the charging terminal.

Doing so may cause malfunction.

Handling the FOMA Card (UIM)

c Do not apply excessive force to the FOMA

card (UIM) when attaching/removing it.

c It is normal that the FOMA card (UIM)

become warm while being used. Keep using it.

c Note that the warranty does not cover

damage caused by inserting the FOMA card (UIM) into another type of IC card reader or writer.

c Always keep the IC part clean. c Wipe with a soft, dry cloth (such as

eyeglass cloth).

c Please keep a separate record of the

information you have registered in your FOMA card (UIM).

Please be aware that DOCOMO bears no obligation or responsibility in the event that data is altered or lost.

c To preserve the environment, bring

discarded FOMA cards (UIM) to a docomo Shop or service counter.

c Avoid using the FOMA card (UIM) in

extremely high or low temperatures.

c Do not damage, scratch, unnecessarily

touch, or short circuit the IC.

Doing so may cause data loss or malfunction.

c Do not drop the FOMA card (UIM) or expose

it to strong shocks.

Doing so may cause malfunction.

c Do not bend the FOMA card (UIM) or place a

heavy object on it.

Doing so may cause malfunction.

c Do not put a label or sticker on the FOMA card

(UIM) when attaching it to the FOMA terminal.

Doing so may cause malfunction.

Easy Search/Contents/Precautions

Continued on next page

Using the Bluetooth Function

c The FOMA terminal supports the Bluetooth

security function compliant with Bluetooth standards, but the security may not be

Easy Search/Contents/Precautions

sufficient depending on the setting. Take care when making data communications using Bluetooth.

c Please be aware that DOCOMO is not

responsible for data leak when making data communications using Bluetooth.

c You can use a headset, handsfree and audio

on the FOMA terminal. The audio/video remote control may be available for audio. (Only on compatible Bluetooth devices)

c Frequency band

The following are frequency bands that the FOMA terminal’s Bluetooth function uses:

2.4 FH 1

2.4 : This radio equipment uses the

FH : Modulation scheme is the FH-SS

1 : The estimated interference distance is

2400MHz band.

system.

10m or less.

: The full band between 2400MHz and

2483.5MHz is used and that the band of the mobile station device cannot be avoided.

■ Bluetooth cautions

The operating frequency band of this equipment is used by industrial, scientific, consumer and medical equipment including microwave ovens, premises radio stations for identifying mobile units used in the manufacturing lines of plants (radio stations requiring a license), specified low power radio stations (radio stations requiring no license) and amateur radio stations (hereinafter referred to as “another station”).

1. Before using this terminal, confirm that “another station” is not being operated nearby.

2. In the event of this terminal causing harmful radio wave interference with “another station”, promptly change the operating frequency or stop radio wave emission by turning off the power, etc.

3. If you have further questions, contact the inquiries number provided on the back of this manual.

Handling the FeliCa Reader/Writer

c The FeliCa reader/writer function of the

FOMA terminal handles delicate signals that require no radio station license.

c The 13.56MHz frequency band is used. If

there is another reader/writer around, keep enough distance between the FOMA terminal and the reader/writer. Also, make sure that there is no radio station using the same frequency band nearby.

Cautions

c Do not deform the FOMA terminal. Using an

altered device is a violation of the Radio Law.

A “Technical Conformity Mark ” affixed on the manufacturer’s specification sticker certifies that the FOMA terminal meets technical regulations for specified radio equipment that are based on the Radio Law. If you remove the screws and alter the inside of the FOMA terminal, the technical regulations conformity certification becomes invalid. Do not use the FOMA terminal with the certification invalid, as it is a violation of the Radio Law.

c Be careful when using the FOMA terminal

while driving.

A penalty may be imposed for holding a mobile phone while driving. When you need to receive a call, tell the caller that you will call back later using handsfree functions, then pull off the road before using the phone.

c Use the Bluetooth function only in Japan.

The Bluetooth function of the FOMA terminal complies with radio standards of Japan and is certified. You may be punished if you use it overseas.

c Use the FeliCa reader/writer function only in

Japan.

The FeliCa reader/writer function of the FOMA terminal complies with radio standards of Japan. You may be punished if you use it overseas.

c Use the IC card authentication function in

Japan.

The IC card authentication function of the FOMA terminal complies with radio standards of Japan and is certified. You may be punished if you use it overseas.

Package Contents

N-02A

(Including the warranty and Back Cover N33)

Easy Search/Contents/Precautions

N-02A INSTRUCTION MANUAL

(This manual)

* The Quick Manual starts on p.520.

CD-ROM for N-02A

* This CD-ROM contains PDF data: “Manual for

PC Connection” and “Kuten Code List”.

FOMA AC Adapter 01/02

(Including warranty and manual)

Other options and accessories→ p.466

Battery Pack N16

Desktop Holder N15

(Including manual)

Before Using the Handset

Part Names and Functions ............................................................................................. 22

Viewing Display............................................................................................................... 24

How to View the Indicator Display (Rear Panel Display)................................................. 27

Function Display and Key Operations............................................................................. 28

i-Widget Display and Operations .................................................................................... 28

Selecting Menu ............................................................................................................... 29

Basic Operations on the Screens ................................................................................... 33

Description of the Operations ......................................................................................... 35

Function Menu ................................................................................................................ 36

Using the FOMA Card (UIM) .......................................................................................... 38

Attaching/Removing Battery Pack .................................................................................. 40

Charging ......................................................................................................................... 41

Checking Battery Level ................................................................................. 43

Turning the Power On/Off ......................................................................... 44

Switching between Japanese and English............................................... 44

Configuring Initial Settings............................................................................ 44

Setting Clock...................................................................................................................45

Notifying the Other Party of Your Phone Number.............................. 46

Checking Your Own Phone Number ................................................................ 46

Battery level

Power ON/OFF

Select language

Initial setting

Caller ID Notification

My Profile

Part Names and Functions

(

)

q w

Before Using the Handset

8 9

Connect an external-connector-compatible earphone (optional). To use an incompatible earphone, connect an adapter converter (optional).

■ Functions

1 Infrared data port →p.353 2 Earpiece 3 Display 4 Front camera

• Capture an image of yourself using the camera function

• Show the video of yourself during videophone calls

0 @ #

* The 1Seg antenna is built-in.

Flat-plug earphone/microphone with switch (optional) connection example

Phone plug

②

Flat-plug of

①

earphone/ microphone with switch

Earphone connector (flat)

5 Illuminance sensor→ p.107 6 oFunction key 1

• Perform the function displayed on this key→ p.28

• Display the mail menu

• Make videophone calls→p.48

• Switch the character mode when entering text

→p.400

7 pFunction key 2

• Perform the function displayed on this key→p.28

• Display the i-mode menu

8 Multi-function keys

f/g Up/Down key

• Move the cursor, displayed content, etc. up or down (Scroll continuously when the key is held down)

• f: Display the i-Widget screen→p.289

• g: Display the search phonebook menu screen

h/jLeft/Right key

• Move the cursor to the left or right

• Scroll the display to the previous or next screens by page→ p.3 3

• h: Display the Received call history→p.54

• j: Display the Redial→p.54

dOK key

• Perform the function displayed on this key (Mainly “Select” or “Set”)→p.28

9 iFunction key 3

• Perform the function displayed on this key→p.28

• Display the Main Menu/Simple Menu→pp.29, 32

• Display the task change screen→p.367

0 uFunction key 4

• Perform the function displayed on this key (mainly function menus)→ p.28

• Activate the function selected in “ch-key setting” →p.369

* Display the i-Channel list at the time of purchase.

! rSend key

• Make voice calls→ p.48

• Answer voice/videophone calls →p.6 1

• Display Choku-Den→ p.92

• Return to the previous reading when entering text in 5-touch→ p.396

@ tBack (Clear) key

• Return to the previous step →p.34

• Put a call on hold →p.64

• Delete the entered phone number or characters →pp.48, 401

# yPower/End of operation/Hold key

• Turn the power on (1 second or longer)/off (2 seconds or longer)→p.44

• End each function →p.34

•End a call→p.49

• Put an incoming call on hold →p.64

$ 0 to 9 Dial keys

• Enter phone numbers, characters and numbers

% w/Public mode (Driving mode) key

• Set Public mode (Driving mode) (1 second or longer)→p.64

• Switch the entered character into upper or lower case→ p.400

•Enter “＊ ” or dakuten/han-dakuten→p.455

^ q/Manner key

• Set Manner mode (1 second or longer) →p.101

• Enter “#”, punctuation marks, etc. →p.455

& Mouthpiece/Microphone * Charging terminal ( Strap hole

)

PushTalk key/(MUSIC)

• Use PushTalk→p.74

• Display PushTalk phonebook while on the

standby screen→ p.77

• Check if there is a missed call or new mail with

the FOMA terminal folded→p.27

• Read out the mail or alarm details (Japanese

mode)→pp.162, 377

• Start Music Player (1 second or longer) →p.262

Volume up key/(マナー)

• Set Manner mode (1 second or longer) →p.101

• Raise the earpiece volume during a call → p.63

• Check the content of missed call or new mail

with the FOMA terminal folded→p. 27

• Scroll back to the previous screen by page

→p.33

• Connect to the site set as “Home URL” →p. 199

Volume down key/(C)

• Display the Photo mode screen (1 second or

longer)→p.222

• Lower the earpiece volume during a call →p.63

• Scroll forward to the next screen by page→ p.33

• Read out the current time (Voice clock) (Japanese mode)

• Play recorded messages→ p.68

e External connector

• Use when charging, connecting an earphone, etc.

• Connect an AC adapter (optional), DC adapter (optional), FOMA USB Cable with Charge Function 01/02 (optional), Earphone Plug Adapter 01 for External connector terminal

, etc.

(optional)

*: Connect a flat-plug stereo earphone set

(optional), flat-plug earphone/microphone with switch (optional), etc.

r Indicator display

• Display the clock or various status of the FOMA terminal →p. 27

t e mark

• Read the IC card →p.292

• iC communications→p.355

y Incoming call lamp/Charge lamp

• Flash when a call, mail, etc. arrives →p. 110

• Light up/Flash when the camera or IC card is used→pp.223, 294

• Light up in red during charging

Continued on next page

Before Using the Handset

u FOMA antenna

• The antenna is built-in. To make calls under better condition, do not cover the antenna part with your hands.

i Rear camera

• Capture still images and movies

• Capture scenery during videophone calls

Before Using the Handset

o Monaural speaker p microSD card slot

• Insert a microSD card → p.337

a Back cover

* In this manual, @, a (マナー ) and s (C) are referred to

as sidekeys.

● Hold-down operations

The following functions are available by holding down each key for 1 second or longer in standby:

Key Function

h Display the Received address list p.172 j Display the Sent address list p.172

Display current location using the

GPS function

2 Configure 2in1 settings p.421 3 Set the IC card lock p.294 5 Switch ECO mode p.107 7 Display the font setting screen p.113 8 Switch Privacy angle p.106 9 Reset the screen/light settings p.335 0 Enter “+” p.52

Ref. page

p.301

Key Function

q Set/Release Manner mode p.101

Set/Release Public mode (Driving

mode)

Adjust the earpiece volume p.63

Check new messages p.159

Display the i-αppli software list p.273

Start/Quit the Music Player (Quit

(MUSIC)

during BGM)

Display the Photo mode screen p.226

(C)

Set/Release Manner mode p.101

(

マナー

)

Viewing Display

z Marks ( , , , etc.) displayed on the display or indicator display are referred to as icons. z A calendar, etc. can be set to the display.→ p.105

■ Display

Icons indicate the FOMA terminal statuses→ p.25

Ref. page

p.64

p.262

Clock display→ p.113

Desktop icon display area

・ , etc.: Desktop icons providing information→ p.114 ・ , etc.: Pasted desktop icons→ p.114

Task icon display area

・ , etc.: Task icons of active functions→ p.367 ・Display the status of the network being used→ p.427

Function/i-Channel ticker display area→pp.28, 204

(Photo mode), (i-concier), ( Quick Search) and

(1Seg) are pasted by default.

■ Indicator display

157 &9 3 2

Icon display area

● Icons indicating the status of the FOMA terminal

13579!#

24680@

^ *)wry

( q e t$u

Icon Description

1 Battery level→ p.43

Temperature monitor→p.41

2 Signal strength →p. 44

Out of service area/Signals do not reach→p.4 4

Self mode →p. 139

3 / i-mode/i-mode communication in

/ / Packet communication in progress

/ Packet communication in progress

progress →p.186

(no data exchange/sending/

receiving)

(sending/receiving)

PushTalk call in progress →p.74

4 SSL page displayed→p.188

5 /

(Red)

6 /

(Red)

Unread mail/Inbox is full→ p.156

SMS in the FOMA card (UIM) is full →p. 350

Unread mail/SMS in the FOMA card (UIM) is full→ pp.156, 350

Inbox is full/SMS in the FOMA card (UIM) is full→ pp.156, 350

Unread Area Mail→ p.177

Unread MessageR/Full →p. 175

Icon Description

6 /

(Red)

/ / / Unread message R and F (in red

7 /

(Red)

9 i-concier information→p.207

0 / GPS location request active

Unread MessageF/Full→p.175

when full)→p.1 75

Mail stored at the i-mode center/Full →p. 159

“Receive option setting” is set to “ON” and mail is stored at the i-mode center →p. 158

MessageR is stored at the i-mode center/Full→ p.17 5

MessageF is stored at the i-mode center/Full→ p.17 5

Dial lock→ p.123

Secret mode/Secret data only mode →p. 125

Original lock/Original lock released temporarily →pp.128, 129

Secret mode or Secret data only mode and Original lock is set or released temporarily →pp.125, 128, 129

Infrared data exchange in progress →p. 353

Infrared remote control operated →p. 357

IC card authentication in progress →p. 133

IC communication in progress (sending/receiving data) →p.355

(Location request set to “ON”)/GPS location request active (Location request set to “OFF” while Permission period is set)→p. 307

Continued on next page

Before Using the Handset

Icon Description

0 GPS positioning→ p.301

! Invitation report (i-αppli call)→ p.284

@ (blue) Bluetooth power on (Light)/

Before Using the Handset

(Black) In Bluetooth power saver mode

Bluetooth connected (Flash)→p.390

Bluetooth call in progress →p.392

→p.390

# microSD card inserted→p.3 37

microSD card (invalid) inserted →p.337

microSD reader/writer operated →p.347

microSD being accessed→ p.340

/ microSD mode/MTP mode set

/ / USB cable connected and

/ / Handsfree device connected and

/ / USB cable/Handsfree device

During a voice call→p.48

64K data communication in

progress

During a videophone call→p.48

Switching between voice call and videophone call →pp.51, 62

→p.347

Communication mode/microSD mode/MTP mode set→ p.34 7

Communication mode/microSD mode/MTP mode set→ pp.60, 347

connected and Communication mode/microSD mode/MTP mode set →pp.60, 347

% Vibrator→ p.98

^ Ring volume set to “Silent”→p.63

Mail/Msg. ring time set to “OFF” →p.100

& Manner mode→ p.101

/ Auto manner mode set ON/release

ON→ p.1 01

Icon Description

& / Remote monitoring (Auto manner

mode set ON/OFF)→ pp.72, 101

* Public mode (Driving mode)→ p.6 4

( Music&Video Channel booking

) Alarm notification function

→p.257

→pp.252, 376

q Timer recording→p.2 52

w to Voice Mail message→ p.412

e [Record message ON, Auto voice

to Auto voice memo 0 to 2→p.381

to Record message 0 to 5→ p.67

memo ON]

No Record message or Auto voice memo→ p.38 1

Record message only→ p.381

Auto voice memo only→ p.3 81

Record message and Auto voice memo→ p.38 1

[Record message OFF, Auto voice memo ON]

[Record message ON, Auto voice memo OFF]

r to Record VP message→ p.67

t ECO mode “ON” →p. 107

Privacy angle “ON” →p. 106

Privacy angle “ON”, ECO mode “ON”→ pp.106, 107

Keypad lock active→ p.1 32

u IC card lock→ p.294

Side key guard set to “ON” →p. 134

Side key guard and IC card lock setting→ pp.134, 294

*: For details on packet communication and 64K data

communication, refer to “Manual for PC Connection” (PDF) in the bundled CD-ROM.

z The display adopts state-of-the-art technology; some dots (points) may not light up while others may

constantly light up due to its characteristics. Note that this phenomenon is not a failure.

z To check the names of displayed icons, select “Settings/Service”X“Display”X“Icons”.

How to View the Indicator Display (Rear Panel Display)

On the indicator display, incoming call, mail or alarm notifications appear with various messages, images or animations.

● Display example

Clock (Digital 1) Alarm notification Chaku-moji Receiving call Missed call/New mail On hold

Before Using the Handset

Timer recording

notification

GPS positioning Emotion-expressing

mail

IC card

authentication

Ticker for new

i-Channel (twice)

Checking missed calls/new mail

When the FOMA terminal is folded and there is a missed call or new mail (i-mode mail, Area Mail and SMS), new chat mail, the incoming call lamp keeps on flashing. Press a ( マナー ), @ to check the content with the FOMA terminal folded.

■ Checking a missed call

Press a (マナー ) to view received date/time/ caller’s name (phone number), etc.

■ Checking new mail

Press a (マナー ) to view sender/received date and time/subject (when “Mail” under “Indicator display” is set to “ON”).

* Press @ to display the “New mail” icon. When you press @ again, the sender and mail message are read out

(Japanese mode).

z If there are multiple missed calls or new mail, you can check the content of the latest one only. z When the activation of the Received calls record or mail function is locked in the “Original lock”, information

on the missed call or mail is not displayed but only the “Missed call” or “New mail” icon appears.

z When the mail subject contains Chinese text that cannot be displayed in Japanese font, “New mail” appears

instead of the new mail subject.

Flashing of the Incoming call lamp

z When there is a missed call, new mail or new chat mail, the incoming call lamp keeps flashing in the

color set in “Illumination”.

• The lamp does not flash when “Missed info” under “Illumination” is set to “OFF”.

• When Gradation is set under “Illumination”, the lamp flashes in the default color.

• When the color is set for the caller/sender in the phonebook, the lamp flashes in the specified color.

• The lamp does not flash in Public mode (Driving mode).

<To turn off the lamp> When you check the content of “Missed call”, “New mail” or “New chat mail” displayed on the display or indicator display and icons disappear, the lamp is turned off.

a (マナー )

Displaying the clock to check time

Press a (マナー ) or s (C) with the FOMA terminal folded to turn the indicator display on and display the clock.

z When you press s (C), the clock is displayed and the current time is read out at the same time (when there

is no missed call, new mail, etc.) (Japanese mode).

Before Using the Handset

z You can select the clock type (4 types) or the display time (15 seconds/30 seconds/60 seconds) in

“Indicator display”. The clock cannot be displayed at all times.

Function Display and Key Operations

The soft keys (Function display) corresponding to o, d, p, i, u and the direction icons corresponding to b are displayed on the screen. These icons appear only when the corresponding keys can be used.

■ Performing the functions assigned to the function key

Press the key for 1 to 5 to activate the function.

1 shows (Settings), (Edit), (Finish), (Play), (Send), (New), etc.

The center of 2 shows (Select), (Set), (Play), (Dial), etc.

3 shows (Disp SW), (Ir data), (Open), etc. 4 shows (MENU) and (MULTI). 5 shows (ch), (FUNC), (Close), etc.

Press u while (FUNC) is displayed to open the function menu. →p. 36

■ Moving or scrolling the screen (6)

The icon ( ) only displays available directions. Use b to move or scroll in the direction.

[Notation]

■ Description of the function display

In this manual, operations related to the keys for the function display are generally described with the function display in parenthesis, such as Xd (Select) and Uu (FUNC).

24153

i-Widget Display and Operations

The i-Widget screen shows a list of multiple Widget Applications running simultaneously.

z Widget operations→ p.289

1 Widget Applications

Display Widget appli. Select Widget appli to display only the Widget appli.

2 Navigation

Display navigation linked to key operation. Press p (シャッフル (Change Layout)) on the i-Widget screen to shuffle

Widget appli randomly.

i-Widget

Selecting Menu

You can run, set, and check the FOMA terminal’s functions in a variety of ways. There are various methods although a function is generally selected from the main menu.

Selecting functions from the main menu

You can select various functions of the FOMA terminal from the main menu, which appears when you press i on the standby screen. Menus are classified according to functions.→p.440

<Example: To set the “Illumination in talk” function>

Press i on the standby screen to display the main menu

If no key is pressed for 15 seconds while the main menu is displayed, the main menu ends and the previous screen appears.

Use b to move the highlight, then press d (Select) to select the

displayed menu sequentially

bdcd

Tip

Before Using the Handset

The highlighted item is displayed in two lines and the current setting is displayed.

Tip

Holding down c moves the highlight continuously.

Accessing functions with shortcut keys

On each screen, you can access a function easily by pressing the function key pre-assigned to the function.

Press the function key on the standby screen

Before Using the Handset

Pressing f displays the i-Widget screen. →p. 289

Pressing o displays the Mail menu. →p. 146

Pressing g displays the Search phonebook screen.→ p.88

Pressing p displays the i-mode menu. →p. 186

Pressing h displays the Received calls screen.→ p.54

Pressing u displays the Channel list. →p.205

Pressing j displays the Redial screen. →p. 54

z When using the Simple Menu (p.32), pressing o or p on the standby screen displays the Simple

Menu.

z You can change functions to access with u key.→p.369

Searching menu items to access functions

Even if you do not know the procedure to access a function, you can still access the desired function by entering keywords to search menu items.

<Example: To access “Select ring tone”>

Press i on the standby screen, then press u (FUNC), and highlight

“Search” then press d (Select)

iu d

Enter “ring” and press d (Set), then select the displayed menu

dpd

Before Using the Handset

The search result is underlined.

If there are two or more search results, press p (Next) to move the frame.

Selecting functions from the original menu

By storing your frequently used functions (p.109), you can access the menus quickly.

Press i on the standby screen to display the main menu, then press

p (Original)

Pressing p switches between the main and original menus.

Accessing functions by selecting menu numbers

When the main menu is set to “Standard” (p.32), you can access functions quickly by pressing the keys pre-assigned to the menu numbers (p.440).

<Example: To access “Select ring tone”>

Before Using the Handset

Press i on the standby screen, then press 13

i13

Changing the main menu

You can change the design of the main menu (background, icon, etc.).

z When you use Kisekae Tool to change the menu display design, the menu structure may change in

accordance with the frequency of use. Also, some menu numbers assigned to functions do not work.

Press i on the standby screen, then press o (Change)

Main menu

Theme

Select an item

“Sparkle White” - “Standard”

The display design switches to each menu. When set to “Standard”, you can access functions by entering the menu numbers.→ p.32

“Simple Menu”

Simple Menu consists of frequently used menus, and its character size is large and operation procedure is simple.→ p.4 54 The font size of the screens can be set to “X-large” all at once.→ p.1 13 “Original theme”→ p.108 You can change the icons and background image used on the main menu. You can also set a picture you captured as the background. “Kisekae Tool”→ p.119 You can change various designs of the FOMA terminal such as the main menu all at once with the Kisekae Tool package. Selecting “拡大メニュー ” activates the menu in the large character size.

Simple Menu

■ To change the main menu temporarily

Highlight an item on the theme screen and press o (Change) to change the main menu temporarily. When the main menu is displayed again, the previously set main menu appears.

z When you set the menu that can be customized, you can sort the menu items by pressing u (FUNC) in

the main menu and selecting “Manual-sort”. →p.370

Basic Operations on the Screens

This section describes basic key operations.

● When items appear in multiple pages

Use v to display other pages

Press h (or a (マナー )) to go to the previous page, and press j (or s (C)) to go to the next page.

urrent page/Total pages

■ To display other pages using c Pressing f displays the previous page when the highlight is located at the top of the list, and pressing g displays the next page when the highlight is located at the bottom of the list.

● Using dial keys to select items

Press 1 - 9, 0, w or q corresponding to the menu number

Before Using the Handset

The number corresponding to the dial key

● To select YES/NO or ON/OFF

Use c to move the frame, then press d (Select)

Before Using the Handset

● To display an image in the picture list

Use b to move the frame, then press d (Disp.)

● Entering your security code

Enter a 4 to 8 digit security code, then press d (Set)

● Entering numbers

The entered security code appears as a “ ＿” string. The detail screen of the function is displayed when the security code is successfully entered.

■ If the entered security code is incorrect

A message appears indicating that the entered code is wrong. Re-enter the security code from the beginning.

Enter numbers by pressing 0 to 9

● To cancel operations/To return to the standby screen

■ t

Press t to cancel the last operation, e.g. when you select a wrong menu item. Although the previous screen appears basically, another screen may appear depending on the function.

■ y

Press y to end operations such as settings and return to the standby screen. Although the function ends and the standby screen appears basically, another screen may appear depending on the current screen and function. If you press y during setting operation, the setting operation is canceled and the standby screen reappears.

To enter a 1-digit or 2-digit number on a 3-digit number entry screen, press 0 twice or once before entering the number.

■ To enter “3”

X003

Description of the Operations

In this manual, instructions for menu operations are briefly described in almost all cases as follows.

The operation description example and the actual operations

① ② ③

iX“LifeKit”X“Alarm”XHighlight the item to setXu (FUNC)

①: Press i on the standby screen. ②: Use b to move the highlight to the item in double quotation marks, and then press d (Select). ③: Use b to move the highlight to the item in double quotation marks, and then press d (Select).

Alternatively, press 1 to 90wq corresponding to the menu number in double quotation marks.

④: Use b to move the highlight. ⑤: Press the key for the function displayed in parentheses.

[Notation]

■ Omission of Xd in the “Select” and “Set” operations

• When a target function is selected from the main menu or list, such as examples ② and ③, Xd (Select) is

omitted.

• In cases such as “Select any item” or “Enter your security code”, Xd (Select) or Xd (Set) is also omitted.

• When you are supposed to move to the next step without pressing Xd (Select), “Highlight xxx” is used,

such as example ④.

■ Priority given to easy operations

• Although operations performed from the main menu are described, this manual gives priority to shortcut key operations (p.30) if any.

• To select a function from the Simple Menu, refer to “Simple Menu function list” (p.454).

■ Omission of the descriptions of subsequent steps after the operation is complete

• The descriptions of subsequent steps after the operation is complete are omitted.

• “To cancel operations/To return to the standby screen” →p.34

■ Brief description of keys and menus

• In this manual, instructions on key illustrations/menu displays/holding down keys are simply described as follows:

Actual display/operation Menu Press q for 1 second or longer Description in this manual 1 iMenu q (1 second or longer)

Key Menu display Holding down keys

■ Combined description of menu items

To describe multiple menu items at once, “,” is placed between the items as in the following example:

<Example: Function menu of the Choku-Den screen>

Store, Edit……Store information in a Choku-Den with no information stored, or edit a Choku-Den with

information already stored.

④ ⑤

Before Using the Handset

Function Menu

“Function menu” is one of the menus that can be accessed from the function display. The function menu activates supplementary functions of each screen. For example, you can use the function menu to delete mail after reading it, or to select the folder to

Before Using the Handset

save an image you captured with the camera.

● Using the function menu

There are mainly three methods to use the function menu. Use the appropriate method depending on the situation.

①Refer to the explanation of the function menu items from the reference page stated on the operation screen ②Refer to the explanation of the function menu items from the function menu index ③Find the procedure to display the operation screen from the reference page of the function menu

Operation screen with the reference page for the function menu is illustrated in a blue frame and differentiated from others.

Function menu

Mail

Address (list/detail). . . . . . . . . . . . .172

Detail . . . . . . . . . . . . . . . . . . . . . . . . . .171

Folder list . . . . . . . . . . . . . . . . . . . . . .168

List . . . . . . . . . . . . . . . . . . . . . . . . . . . .170

Mail history box detail . . . . . . . . . .171

Mail history box folder list . . . . . .170

Mail history box list

Message . . . . . . . . . . . . . . . . . . . . . .148

New mail . . . . . . . . . . . . . . . . . . . . . .147

. . . . . . . . . . . . .170

New mail

Function menu¨p.147

①

③

New mail screen (p.146)

Send→p.146

Save→p.154

Delete receiver……If there are 2 or more addresses

entered, you can delete the address you select.

Change rcv. type……Changes the address type with an

address highlighted.

②

* “Function menu items” and “Function menu index” in the above illustration are only excerpts.

● Operation target on the list screen

In the function menu on the list screen, there are cases where highlighted data are targeted or all the data in the list are targeted. For example, “Edit title” or “Delete this” targets a highlighted title or data, and “Delete all” targets all the data. When you select a function menu that targets a data in the list, such as “Edit title” or “Delete this”, highlight the data, then press u (FUNC).

<Example: To edit the bookmark title on the list screen>

XHighlight a bookmark Xu (FUNC)

X“Edit title”

XEdit the title Xd (Set)

The bookmark title changes.

● Selecting multiple items

When you delete unnecessary data, protect important data or move the data to prevent others from viewing to the Secret folder, you can select not only one data or all data but also multiple data. In this case, perform the following operation:

<Example: To delete multiple mail on the Received mail list screen>

Before Using the Handset

X“Delete selected”

XCheck mail to delete

Xo (Finish) X“YES”

Marking a checkbox

Use b to move the frame to the item to select and press d (Select). The checkbox changes from to

. This means that the item is selected. Pressing d (Select) switches between and .

In the picture list, appears when the item is selected. Nothing appears when unselected.

• When “ ” appears on the function display area, pressing u (FUNC) allows you to use “Select all” or “Release all”.

● Menus toggling

Depending on the menu, menu items toggle as follows:

When rear camera

is used

When front camera

is used

[Notation]

■ Description of menus toggling

Such menus are described as “Front camera⇔Rear camera”.

z When the displayed menu contains sub menus, “ ” appears on the right. z The function menu may contain different items or some items may not be available depending on the

operating function and settings. Unavailable function menu items are grayed out.

When the shooting screen is displayed and “Rear camera” is used, “Front camera” appears as in <Example 1>. If you select “Front camera” at this point, the “Front camera” activates, and “Rear camera” appears next time the function menu appears.

Using the FOMA Card (UIM)

The FOMA card (UIM) is an IC card that contains private information such as your phone number. Before inserting or removing the FOMA card (UIM),

Before Using the Handset

turn the power off and remove the battery pack. →p. 40 Also, insert or remove the FOMA card (UIM) with the FOMA terminal folded and held in your hand.

●

Attaching/Removing the FOMA card (UIM)

The illustration shows how to attach the FOMA card (UIM).

Insert the FOMA card (UIM) into

the slot with the IC side down as shown in the illustration

Cut corner

FOMA card (UIM)

Insertion slot

Gold colored IC side down

Insert the FOMA card (UIM) until it

locks in place

To remove the FOMA card (UIM), gently pull it out straight from the position described below.

Properly inserted

Security codes

You can set 2 PIN codes on the FOMA card (UIM) for your FOMA terminal, the PIN1 code and PIN2 code. →p.122

FOMA card security function

The FOMA terminal is equipped with the FOMA card security function (FOMA card operational restriction function) to protect your data and files. z When you download data or files from sites or

receive data attached to mail, the FOMA card security is automatically set on these data and files.

z Data and files with this function set are accessible

only when the inserted FOMA card (UIM) was also used when downloading these data or files.

z The following are data and files subject to the

FOMA card security function:

• Files attached to i-mode mail (except for ToruCa)

• Screen memo

• Image inserted into Deco-mail or signature

•i-αppli (including i-αppli standby screen)

• Image (including animation and Flash movie)

• Melody

• Image of ToruCa (detail)

• Image downloaded from the Data Security Center

• Program of Music&Video Channel

• Movable contents data

• i-motion

• Chara-den

• Chaku-Uta

• PDF data

• Kisekae Tool

• Record VP message

• Mail templates containing data subject to operational restrictions

• Machi-chara

• Download dictionary

• MessageR/F with attachment (melody/image)

• e-book/e-comic

*:“Chaku-Uta” is a registered trademark of Sony Music

®*

/Chaku-Uta-Full

Entertainment (Japan) Inc.

z A FOMA card (UIM) that was inserted when you

downloaded or received data or files is hereinafter referred to as “your FOMA card (UIM)” and other FOMA cards as “other FOMA card (UIM)”.

When the inserted FOMA card (UIM) was used to download data or receive mails, you can view or play the data that applies to the FOMA card Security function.

Changing the FOMA card

When the inserted FOMA card (UIM) was not used to download data or receive mails, you cannot view or play the data that applies to the FOMA card Security function.

Yo u r

FOMA card

Other

FOMA card

z If the FOMA card (UIM) is not attached or you

replace the FOMA card (UIM) with another one, “ ” appears for data and files with this function set and you cannot set these data in “Display setting” or “Select ring tone”.

z Data and files with this function set can be moved

or deleted with another FOMA card (UIM) inserted.

z If you remove the FOMA card (UIM) or change to

another FOMA card (UIM) when data or files with this function set are set in “Display setting” or “Select ring tone”, these settings are reset to default. When your FOMA card (UIM) is inserted again, the settings return to your settings.

z If replaced with another FOMA card (UIM), Widget

appli you downloaded will not start from the i-Widget screen or Widget appli list screen.

Settings for replacing the FOMA card (UIM)

When you replace the FOMA card (UIM) inserted to the FOMA terminal with another FOMA card (UIM), the following settings are changed:

z Functions of which settings are changed to settings

stored on the new FOMA card (UIM)

• Select language • SMS center selection

• SMS validity period • PIN setting

• Host selection under Connection setting

z Functions that are reset to default

• i-Channel setting

• Access setting for Full Browser

z Functions that are set to “Invalid”, “OFF”, etc.

• Cookie setting for Full Browser (Cookie information remains)

z Functions of which current settings of the FOMA

card (UIM) become invalid

• Program setting of the Music&Video Channel (Set programs again)

FOMA card types

The FOMA card (UIM) (blue) has the following functional differences from the FOMA card (green/ white).

Function Blue Green/White

Max number of digits for phone number to be stored in the UIM phonebook

User certificate operation to use FirstPass

WORLD WING Not available Available Service Numbers Not available Available

20 digits 26 digits

Not available Available

WORLD WING

WORLD WING is the FOMA international roaming service that enables you to make and receive calls in overseas with the same mobile phone number you use in Japan with the FOMA card (green/ white) and the mobile phone which is compatible with the service. z If you started to use FOMA services after

September 1, 2005, you do not have to apply for international roaming services to use it. However, if you did not wish to use it, you have to apply for it separately.

z If you started to use FOMA services before

August 31, 2005 and have not applied for “WORLD WING” yet, you have to apply for it separately.

z Services are not available in some billing plans. z If your FOMA card (UIM) (green/white) is lost or

stolen, please immediately contact us and follow the procedure to cancel services. Refer to the back of this manual for the inquiries numbers. Note that you must pay communication charges incurred after it is lost or stolen.

Before Using the Handset

Attaching/Removing Battery Pack

z Make sure to turn the power off before removing

the battery pack. Also, keep the FOMA terminal

Before Using the Handset

folded and held in your hand.

●

Attaching

Remove the back cover

Press the back cover in direction ①, and slide it in direction ② to remove the back cover.

Attach the battery pack

With the product name side facing up, attach the battery pack in direction ③ making sure that the tab of the battery pack fits the metal connector of the FOMA terminal (Phone), then press the battery pack down in direction ④.

Attach the back cover

Lift the back cover about 3 mm and align it to the groove of the FOMA terminal (Phone). Press the back cover in direction ⑤, slide it in direction ⑥ and press the back cover until it clicks.

●

Removing

Remove the back cover

Remove the battery pack

Press the tab on the side of the battery pack in direction ①, then lift upwards in direction ② to remove the battery pack.

Finger tab

z Do not apply excessive force when the tip of the

back cover is inserted into the FOMA terminal. The finger tab of the back cover may be broken.

Make sure that there is no space between the back cover and the FOMA terminal (Phone).

About 3 mm

Charging

Use the specified Battery Pack N16.

■ Battery pack life

• The battery pack is consumable. The amount of usable time decreases every time the battery pack is recharged.

• When a fully charged battery pack only lasts half as long as it did at the time of purchase, the battery pack life is almost over. It is recommended that you replace it with a new one. When the life of the battery pack is near end, the battery pack may expand a little depending on the usage condition, but this is not a malfunction.

• The battery pack life may be shortened if i-αppli, videophone or 1Seg is used for a long time while charging.

To protect the environment, bring used battery packs to a docomo Shop, agency, recycle shop, etc.

■ Charging

• For details, refer to the manuals for the FOMA AC Adapter 01/02 (optional), FOMA AC Adapter for Global Use 01 (optional) and FOMA DC Adapter 01/02 (optional).

• FOMA AC Adapter 01 supports voltage of 100V AC only.

• FOMA AC Adapter 02 and FOMA AC Adapter 01 for Global use supports voltage from 100V AC to 240V AC, but the plug shape of the AC adapter is for 100V AC (domestic). For overseas use with the AC adapter supporting voltage from 100V AC to 240V AC, the compatible conversion plug adapter is required. Do not charge the battery using the transformer for travel.

• When charging, the battery pack must be attached to the FOMA terminal.

• You can receive calls during charging if the power is turned on. However, the battery level will fall during the call and the time required for charging will increase. Charging time also increases when “Charging” under “Backlight” is set to “All time ON”.

• When plugging in or out the connector, do it slowly and securely not to apply excessive force.

• When the charge lamp and “ ” flash, charging is not available due to temperature monitoring until the terminal temperature cools down enough for charging.

• When you make a call or perform packet communication during charging in a hightemperature environment, the FOMA terminal’s temperature may rise and the charging may be stopped. If this occurs, stop a running function and wait for the temperature of the FOMA terminal to fall before you retry charging.

■ Do not charge the battery pack for a long

period of time (several days) with the power turned on

• If you charge the battery pack for a long period of time with the power turned on, power to the FOMA terminal will be supplied from the battery pack once charging ends. As a result, you will only be able to use the FOMA terminal for a short time and the lowvoltage alarm may sound immediately. In this case, recharge the battery pack correctly. Disconnect the FOMA terminal from the AC adapter (or desktop holder) or DC adapter, then set it again for recharging.

■ Battery usage time (the duration varies

depending on the charging time and the deterioration of the battery pack)

[FOMA/3G] Stationary (“Auto”*): Approx. 550 hours

[GSM] Stationary (“Auto”*): Approx. 290 hours

[FOMA/3G] Voice communications: Approx. 200 min.

[GSM] Voice communications: Approx. 190 min.

Normal viewing (1Seg effect ON): Approx. 210 min. Normal viewing (1Seg effect OFF): Approx. 270 min. 1Seg ECO mode: Approx. 300 min.

*: Switch networks in “3G/GSM setting” (p.430).

• “Stationary standby time” is the estimated average battery operational time when the FOMA terminal is closed and stationary in the service area where reception is normal.

• “In transit standby time” is the estimated average battery life when the FOMA terminal is closed and remains in the combined conditions of being stationary or in transit in the service area where reception is normal, and outside the service area.

• 1Seg viewing time is an estimate of the viewing time using Flat-plug Stereo Earphone Set P01 (optional) when reception is normal.

• In certain circumstances, talk (or communications) and standby times may drop to as low as half the times shown or 1Seg viewing time may be reduced due to the battery charge, function settings, temperature, or radio reception in the area (weak or no reception).

• Frequent use of functions such as i-mode, mail, data communication, multiaccess, i-αppli, camera, video/i-motion/music and 1Seg may reduce the actual usage time.

• Times may be shorter depending on the network conditions of the country of stay.

Continuous standby time

In transit (“3G”*): Approx. 410 hours In transit (“Auto”*): Approx. 350 hours

Continuous talk time

Videophone: Approx. 100 min.

1Seg viewing time

Continued on next page

Before Using the Handset

• If “3G/GSM setting” (p.430) is set to “3G”, the talk (or communications) and standby times will be longer when using it in Japan.

■Battery pack charging time

Charging time is the time required to charge a completely empty battery pack with the FOMA

Before Using the Handset

terminal power turned off.

AC adapter Approx. 130 min. DC adapter Approx. 130 min.

Charging with the AC/DC adapter

■AC adapter (optional)

100V AC power outlet

Connector cap

Plug

Connector

Plug the connector with arrows side facing upward

FOMA AC Adapter 01/02

■DC adapter (optional)

Cigarette lighter socket

Release button

Plug the AC adapter into the outlet

Plug the DC adapter into the cigarette lighter socket in your car

Charging starts.

When charging is complete, press

the release button and simultaneously remove the AC adapter/DC adapter connector horizontally from the FOMA terminal

Do not apply excessive force as doing so may cause a malfunction.

Unplug the AC adapter from the

outlet Unplug the DC adapter from the cigarette lighter socket in your car

Close the external connector cap

of the FOMA terminal

Charging with the desktop holder

Plug the connector with arrows side facing upward

Plug

FOMA DC Adapter 01/02

Open the external connector cap

of the FOMA terminal

Plug the AC/DC adapter connector

horizontally into the FOMA terminal’s external connector

Connector

100V AC power outlet

Plug

FOMA AC Adapter 01/02

Charge lamp

Desktop Holder

N15

Plug the connector of the AC

adapter (optional) horizontally to the terminal on the back of the desktop holder (optional)

Plug the AC adapter into the outlet

Hold the desktop holder, insert the

FOMA terminal in direction ① and place in direction ② as shown in the illustration

After charging is complete, hold

down the desktop holder, then lay and lift the FOMA terminal up in the direction of the arrow

z The charge lamp lights in red during charging.

The charge lamp turns off when charging ends (fully charged).

z The battery pack cannot be charged separately.

Always charge with the battery pack attached to the FOMA terminal.

z If the battery runs out, the charging lamp may not light

up immediately, but the charging itself has started.

z If the power is on, “ ” flashes during charging

and “ ” lights when charging ends.

z When the charge lamp of the FOMA terminal

(Phone) turns off, “ ” disappears and the message “Charge unusual Stop charge” appears, disconnect the FOMA terminal from the AC adapter or DC adapter and remove the battery pack. Then set them again for recharging. If the same error occurs again, there may be a problem or fault on the AC adapter or DC adapter. Contact a docomo Shop or service counter.

z The DC Adapter uses a 2A fuse. If the fuse (2A)

blows, always use the dedicated fuse. Fuses (2A) are consumable items. Purchase a replacement fuse at your local car accessory shop, etc.

z Attach the FOMA terminal to the desktop holder

securely. Also, take care not to pinch the strap.

Checking Battery Level

The indicated battery level is only intended as an approximate guide.

Checking the battery level with icon

When the power is turned on, an icon appears indicating the remaining battery level.

: Full charge.

: Partial charge.

: Low charge. Recharge

the battery.

Checking the battery level with sound and animation

The current battery level is indicated by sound and animation.

iX“Settings/Service”X“Other

settings”X“Battery level”

The check screen appears, and beeps sound in accordance with the level. The battery level animation disappears in about 3 seconds. “3 short beeps” : Full charge. “2 short beeps” : Partial charge. “1 short beep” : Low charge. Recharge the

When the battery runs out

The screen as shown on the right flashes and the low-voltage alarm sounds. The alarm sounds for about 10 seconds and the power is turned off in about 1 minute. To stop this alarm, press any key.

z The recharge battery screen appears and 3 shor t

beeps sound during a voice call, and the recharge battery screen (“ カメラオフ Camera Off” message to the other party) appears during a videophone call. The call is disconnected in about 20 seconds and the power turns off in about 1 minute.

battery.

Before Using the Handset

Turning the Power On/Off

Turning the power on

Before Using the Handset

z Before turning the power on, make sure that the

FOMA card (UIM) is inserted correctly.

y (1 second or longer)

After the Wake-up display appears at the same time as the Wake-up tone rings, the standby screen or initial setting screen appears. If you have just attached the battery pack or you turn the power back on immediately after turning it off, “WAIT A MINUTE” may appear for a short time.

■ When “ ” is

displayed

You are out of the service area or in a place with no reception. Move until the signal strength icon such as “ ” appears. The reception level is displayed as follows:

Standby screen

Good Poor

■ If the Initial setting screen appears → p.44

■ If the PIN1 code/PIN2 code entry screen appears→ p.122

■ Pre-stored mail

“Welcome デコメアニメ ” (Welcome mail) and “緊急速報「エリアメール」のご案内” (Guide to Early Warning “Area Mail”) are stored at the time of purchase.→ p.164

z The wake-up tone rings when the Wake-up

display under “Display setting” is not set to “OFF”.

z When you change the FOMA card (UIM), you

have to enter the 4 to 8 digit security code after turning on the power. The standby screen appears when the security code is successfully entered. If you enter a wrong security code 5 times, the power turns off (you can turn on the power again).

z If the battery ran out or the Auto power OFF

function worked to turn off the power last time, the notification screen appears when you turn on the power again.

Turning the power off

y (2 seconds or longer)

The shutdown screen “SEE YOU” appears and the power is turned off.

Switching between Japanese and English

Switch the display language between Japanese and English.

iX“設定／サービス”X“ディスプ

レイ”X“バイリンガル”X“English”

■ To change from English to Japanese

XiX“Settings/Service”X“Display”X“Select

language”X“日本語”

z When a FOMA card (UIM) is inserted, the Select

language setting is saved to the FOMA card (UIM).

z When “Select language” is set to “English”, “ON”

and “OFF” will be the options for “Display” under “Clock display” and for “Info notice setting”.

English announcement is available for some services.→p.416

Configuring Initial Settings

After turning the power on, configure initial settings in “Set main time”, “Change security code”, “Character size”, “Permit to send loc.” and “Keypad sound”.

Initial setting screenX“YES”

Initial setting

Set the main time→p.45

Change the security code→p.123

The default setting is “0000” (4 zeros).

Set the character size→p.113

Set whether to send location

information via the GPS function →p.307

If “Permit to send loc.” is set to “ON”, enter your security code.

Set the keypad sound→ p.99

Confirm the setting for Software

Update, then select “OK”

z After you set all functions, the initial setting screen

will no longer appear at power on.

Setting Clock

Set the date and time in “Set main time”. In “Set sub clock”, set the show/hide setting and display mode of the sub clock.

z The FOMA terminal can automatically adjust time

based on the time information (Greenwich Mean Time, GMT) and the time zone (the local time).

z The time zone is set as time difference to

Greenwich Mean Time set every hour on the hour. When another city or area is registered by the same time difference, “ ” appears in the function display. Press o to change the city or area.

Setting the main time

iX“Settings/Service”X“Clock”

X“Set main time”X“Auto time

adjust”

■ To set the summer time

X“Summer time”

When set to “ON”, time is displayed with 1 hour added.

Select any item:

Auto……Automatically adjust the main clock date

and time.

Auto……Automatically adjust the date and

time based on the retrieved time information and time zone information. The local time is displayed during international roaming.

Manual (Time zone set)……Select time zone

to display the local time.

Manual (Date time set) ……Enter date and time in

the main clock manually. Select the time zone, then enter date and time.

■To enter date and time

Use b to move the highlight, then use dial keys to enter numbers.

z After you set the date and time, you can use

functions such as “Alarm” and “Schedule” that use the date and time.

z The adjustable range of date and time is between

00:00 on January 1, 2004 and 23:59 on December 31, 2037.

z When the power is turned on with a FOMA card

(UIM) inserted, the time is adjusted automatically.

z If time is not adjusted for long periods after the

power is turned on, reboot the power.

z A time lag of several seconds may occur. Also,

time may not be adjusted depending on the signal quality.

z When you use your FOMA terminal overseas,

time may not be adjusted depending upon network conditions of roaming operator. In this case, select the time zone manually.

Setting the sub clock

iX“Settings/Service”X“Clock”

X“Set sub clock”X“Display

method”

■ To set the summer time

X“Summer time”

When set to “ON”, time is displayed with 1 hour added.

■ To display the area name

X“Area name”

When set to “Display”, the sub clock displays the area name.

Select any item:

Auto……Automatically display the sub clock during

international roaming. For example, the main time automatically switches to the local time when “Auto time difference” is set to “Auto”, but the sub clock displays the Japan Standard Time.

Always……Select the time zone to always display

the local time as the sub clock.

OFF……Hide the sub clock.

Before Using the Handset

Continued on next page

z If “Size” under “Clock display” is set to “Up Small”,

the sub clock is not displayed.

z When this function is set to “Auto”, the sub clock

displays the Japan Standard Time when the time zone of “Set main time” is not “GMT+09” (the sub

Before Using the Handset

clock is not displayed in Japan when it is “GMT+09”).

Notifying the Other Party of Your Phone Number

Show your phone number (caller ID) on the other party’s phone (Display) when making a call.

z Take care when informing others of your phone

number, as this is important personal information.

z You cannot use the service when “ ” is

displayed.

iX“Settings/Service”X

“Network service”X“Caller ID Notification”XSelect any item:

Activate/Deactivate……Set whether to send your

caller ID.

Check setting……Check the current Caller ID

Notification setting.

z This function is available only when the other

party’s phone supports the caller ID display.

z If you hear a message requesting your caller ID,

make a call again after setting your caller ID notification.

z Even if you add “186”/“184” to make an

international call, the setting may be disabled. Select “Notify Caller ID” from the function menu.

z If you make a call with the “186”/“184” prefix, the

phone number including this prefix is recorded in the Redial/Dialed calls.

z When you make a PushTalk call, this function’s

setting applies.

Checking Your Own Phone Number

Display and check your phone number (own number) stored in your FOMA card (UIM).

iX0

z You can easily quote information stored in “My

Profile” when entering owner information (such as name or mail address) on websites, etc.→ p.402

z To check your i-mode mail address, select “i-mode

menu”X“iMenu”X“English”X“Options”X“Mail Settings”X“Confirm Settings”.

z When 2in1 is in Dual mode, use c to switch the

My Profile display.

z Reset My Profile for Number B first before you

exchange FOMA cards (UIM) while using 2in1. →p. 379

Voice/Videophone Calls/PushTalk

■Making a voice/videophone call

Making a Voice/Videophone Call .................................................................................... 48

Switching a Voice/Videophone Call during a Call........................................................... 51

Making an International Call ...................................................................... 52

Using Handsfree during a Call......................................................................... 53

Using the Redial/Dialed Calls/Received Calls History..... 54

Using Chaku-moji .......................................................................................... 56

Showing/Hiding Caller ID When Making a Call............................................................... 58

Sending Push Signals Quickly ......................................................................... 58

Using the Prefix Function................................................................................................ 59

Setting Sub-Address When Making a Call......................................... 59

Setting the Alarm for Reconnection ....................................................... 60

Making the Earpiece Sounds Clear ...................................................... 60

Blocking Out Ambient Noise .................................................................... 60

Making a Handsfree Call While Driving ................................................. 60

Redial/Dialed calls/Received calls

■Receiving a voice/videophone call

Receiving a Voice/Videophone Call................................................................................ 61

When the Other Party Switches a Voice/Videophone Call ............................................. 62

Using the Dial Keys to Answer a Call......................................................... 62

Folding the FOMA Terminal to End/Hold Calls ................................... 63

Adjusting the Earpiece Volume............................................................................ 63

Adjusting the Ring Volume............................................................................ 63

■When you cannot answer calls

Holding Incoming/Current Calls ............................................................... 64

Using the Public Mode .................................................................................................... 64

When You Cannot Answer an Incoming Call .................................................. 66

Having the Caller Leave a Message ....................................................... 67

Having the Caller Leave a Message for an Incoming Call ........................ 68

Playing/Erasing Recorded Messages, Voice Memos or VP Memos............................... 68

■Setting the Videophone

Using Chara-den............................................................................................................. 69

Setting Videophone Functions........................................................................................ 69

Using Videophone Connected to External Devices........................................................ 72

Remote Monitoring .............................................................................. 72

■PushTalk

PushTalk ......................................................................................................................... 74

Making a PushTalk Call ............................................................................... 74

Adding Members during a PushTalk Call........................................................................ 76

Receiving a PushTalk Call ........................................................................... 76

Adding an Entry to the PushTalk Phonebook .......................... 77

Making a Call Using the PushTalk Phonebook............................................................... 79

Deleting an Entry from the PushTalk Phonebook .................... 80

Setting PushTalk..................................................................................... 80

Add to PushTalk phonebook

Delete PushTalk phonebook

WORLD CALL

Handsfree

Chaku-moji

Pause dial

Sub-address setting

Reconnect signal

Hyper Clear Voice

Noise reduction

In-car hands-free

Answer setting

Setting when folded

Vol ume

Ring volume

On hold/Holding

Missed call

Record message

Quick message

Remote monitoring

PushTalk dial

PushTalk call

PushTalk setting

Making a Voice/Videophone Call

Enter the phone number of the

other party

Always start with the area code, even for a call within

Voice/Videophone Calls/PushTalk

the same area. You can enter up to 80 digits for the phone number. However, only the last 26 digits are displayed.

■ To insert a number

Press v to move the cursor to the number to the left of the position where you want to insert the number, then enter the number.

■ To delete a number

Press v to move the cursor to the number you want to delete, then press t. Press t for 1 second or longer to delete all the numbers to the left of the cursor and the number at the cursor position.

■ To re-enter the number

Move the cursor to the beginning or end of the number and press t for 1 second or longer to return to the standby screen.

■ To make a videophone call with Chara-

den

XUu (FUNC)X“Select image”X

“Chara-den”XSelect Chara-den

Enter phone number

Function menu¨p.50

r (voice call), o (V.phone)

“ ” flashes while dialing and lights up during the call.

■ If you hear the busy

tone

The line is busy. Call again after a while.

■ If you hear a message

that the other party cannot be reached

The other party’s mobile phone is not turned on or is out of signal range. Call again after a while.

■ If you hear a message requesting your

caller ID

Call again with Caller ID Notification enabled. →pp.46, 58

Function menu¨p.50

“ ” flashes while dialing a videophone call and lights up during the call.

■ If a videophone call is not connected→ p.51

■ To switch between camera image and substitute image

XUu (FUNC)X

“Substitute image”⇔“My side”

■ To send video captured with the rear camera

XXd (Change)

The front camera and rear camera switch each time you press Xd (Change).

■ To switch the main screen

XXd (Change)

“Change main disp.” →p.50

■ To enlarge a camera image to be sent

XUse Xv to adjust zoom

Zoom→ p.235

■ To mute the voice to send

XYa (マナー ) (1 second or longer)

“ ” appears. To cancel muting, press Ya (マナー ) for 1 second or longer again.

Videophone in-call

Function menu¨p.50

In-call

■ To set Hyper Clear Voice→p.60

■ To switch a voice/videophone call during a call→ p.51

■ To put the current voice/videophone call on hold→ p.64

■ To switch between the FOMA terminal and

Bluetooth device (p.388)

Xr (1 second or longer)

■ When 2in1 is in Dual mode

The Outgoing number selection screen appears. Select a phone number.

To end the call, press y

z If no key is pressed for 15 seconds during a call,

the Power saver mode activates.

z Videophone using the rear camera is not

available.

z If you make a videophone call to an emergency

number (110, 119 or 118) from the FOMA terminal, the call automatically changes to a voice call.

z You cannot receive i-mode mail or MessageR/F

during a videophone call (you can receive SMS). Received mail is stored at the i-mode center and can be retrieved using “Check new messages” after the videophone call.

z During battery charge, if the videophone call and

1Seg recording are running simultaneously, the camera-off message may appear and the Camera may be turned off automatically depending on the FOMA terminal temperature. The substitute image appears on the other party’s screen.

z Digital communications charges apply when the

substitute image is displayed during a videophone call.

You can use the videophone call function

Videophone

between terminals that support the DOCOMO videophone system.

z DOCOMO’s Videophone is compliant with the

■Guide to the videophone screen

①Main screen (Camera image of the other party

②Sub-screen (Your own camera image is

③Last call duration ④Settings

*1 : “Send DTMF tone/DTMF tone OFF” →p.50 *2 : “Using Chara-den” →p. 69

3G-324M by the 3GPP Project that sets standards for 3rd generation mobile communications systems). Connections with videophones using different standards cannot be made.

*1: 3G-324M

*2: 3GPP (3rd Generation Partnership Project)

international standard established

(the 3rd Generation Partnership

An international standard for 3rd-generation mobile videophones.

A regional standardization body established to develop commonly applied technical specifications for 3rd-generation mobile communications systems (IMT-2000).

is displayed by default)

displayed by default)

: Hyper Clear Voice (Low/High) : Voice being transmitted/Transmission

error

: Video being transmitted/Transmission

error

: Camera image/Substitute image/

Chara-den being transmitted

: Handsfree ON/OFF

: Muting

: Visual check in progress

: Photo mode (Portrait/Scenery/

Close-up)

: Key operation mode (DTMF

/Whole action mode*2/

mode Parts action mode

)

Voice/Videophone Calls/PushTalk

Enter phone number screen (p.48)

Notify Caller ID→ p.58

Prefix numbers→ p.59

Chaku-moji→ p.56

Int’l call→ p.53

Voice/Videophone Calls/PushTalk

Multi Number→ p.4 18

Add to phonebook→ p.84

Compose message*→p. 146

Select image……Select Me/Chara-den as an image

used during a videophone call. Select “Release settings” to release the setting.

*: Not available when 2in1 is in B mode.

In-call screen (p.48)

Bluetooth/Phone……Switch between the FOMA

terminal and Bluetooth device (p.388).

Videophone in-call screen (p.48)

Petit message→ p.71

Decoration→ p.7 1

Off decoration……Delete the displayed message or

stamp.

Substitute image⇔My side……Switch between the

camera image and substitute image.

Rear camera⇔ Front camera……Switch between the

front and rear cameras. This setting is only retained during the call.

Change main disp.……Change the main display.

The screen changes in the following order: “Displaying the image from the other party’s camera on your main screen” →“Displaying the image from your own camera on your main screen”→ “Displaying only the image from the other party’s camera”→ “Displaying only the image from your own camera”.

Bluetooth/Phone……Switch between the FOMA

terminal and Bluetooth device (p.388).

Visual check ⇔Visual check off……View yourself with

the front camera during a videophone call. Otherwise, end checking. “ ” appears and the substitute image is sent to the other party during visual check.

V.phone settings……Set the screen for videophone

calls.

Visual prefer.……Select Normal/Prefer img qual/

Prefer motion spd for an image sent to and received from the other party. This setting is only retained during the call.

Brightness……Adjust the brightness between five

levels (–2 to 0 to +2).

White balance……Set image color tones.→p. 226

This setting is also applied to the equivalent camera functions.

Color mode set……Select Normal/Sepia/

Monochrome as an image effect. This setting is only retained during the call.

Photo mode……Set the appropriate mode for the

shooting situation.→ p.226 This setting cannot be set for the front camera.

Chara-den set.……Set the following when Chara-den is

used. This setting cannot be set for the camera images.

Switch Chara-den

Action List

Change Action

Switch image……Display an image selected in

“Substitute image” (p.70) on the other party’s display.

Display light……Set the backlight.

All time ON

Same as backlight……Turn on the backlight

according to “Lighting” under “Backlight”.

FrontCamera Rev.……Set whether to display your

camera image as a mirror image (ON) or normal image (OFF) on your FOMA terminal during a call.

Own number……Display your phone number during a

videophone call.

Send DTMF tone⇔ DTMF tone OFF……Set/Release

push signal transmission mode during Chara-den. Videophone calls other than Chara-den are always in push signal transmission mode.

Change to voice→ p.51

Loc. notification→p.3 11

●

If a videophone call is not connected

When a videophone call is not connected, the cause of the failure appears.

z The cause may not appear depending on the

situation.

z Depending on the type of the other party’s phone or

network service subscription, the reason may not accurately reflect the other party’s actual status.

Display Cause

Check number then redial

Busy The line is busy

Busy with packet transmission

Out of service area/ power off

Your call is being forwarded

Redial using voice call

Please activate caller ID before dialing again

This number is not available

Upper limit has been exceeded Connection failed

Connection failed You attempted to connect

Please make your call from the i-mode web page

The dialed phone number is not in use

• This message may also appear during packet communication, depending on the other party’s terminal.

The other party is using packet communication

The other party is out of service area or the phone is turned off

The call is being forwarded (a videophone call is made when the forwarding number is for a 3G-324M-compatible videophone)

The forwarding phone is not compatible with videophone

The other party has set the Caller ID request service

The other party has set the Nuisance call blocking service

The upper limit set for a Limit billing plan (Type Limit or Family Wide Limit) is exceeded

without notifying your caller ID (when dialing into visualnet, etc.)

• This message may also appear in other situations.

Set Caller ID Notification to “ON” and retry.

You attempted to make a videophone call to watch V-live without browsing the i-mode official site

z If the videophone call is not supported, your call is

automatically switched to a voice call when you set “Auto redial as voice” to “ON”. However, the videophone may not work properly if you call an ISDN synchronous 64K access point, 3G-324Mincompatible ISDN videophone (as of October,

2008) or if you dial a wrong number. Call charges may apply.

Switching a Voice/Videophone Call during a Call

z You can use this function with terminals compatible

with voice call/videophone call switch.

z You can switch calls only when you are the caller. z To switch calls, the receiver needs to set “Ntfy

switch-mode” beforehand.→ p.70

<Example: To switch a voice call to a videophone call>

In-call screen (p.48)Xd (V.phone)

X“YES”

During switching, a screen appears indicating that the calls are being switched, and voice announcement is played.

Digital communications charges apply after this screen appears.

■ To switch a videophone call to a voice call

XVideophone in-call screen (p.48)X

u (FUNC)X“Change to voice”

z It takes about 5 seconds to switch the calls. Note

that the signal quality may affect the switching time.

z You cannot switch calls in the following cases:

• When the other party is holding the call

• When the other party activates Record message

z The displayed call duration is reset to 0 seconds

each time the calls are switched. However, the total time of the voice and videophone calls is displayed after the call ends.

Continued on next page

Voice/Videophone Calls/PushTalk

z Depending on the other party’s communication

conditions or signal quality, you may not be able to switch the calls and the call may be disconnected.

z When the call is switched, the first dialed or

received call is stored in the Redial/Dialed calls or Received calls.

<When switching from voice call to videophone

Voice/Videophone Calls/PushTalk

call>

z If the caller is using i-mode, i-mode is

disconnected and the call is switched to videophone.

z If the other party is using packet communication

(including i-mode), the message “No Switch” appears and the calls cannot be switched.

z You cannot switch the calls when “Call Waiting” is

active.

Making an International Call

WORLD CALL is a service where you can use your DOCOMO mobile phone to call overseas. You applied for “WORLD CALL” when you started to use FOMA services. (Except if you did not wish to apply for it.)

z You can make a call to approximately 240 countries

and regions worldwide.

z “WORLD CALL” charges are billed with your

monthly FOMA call charges.

z In addition to directly dialing a phone number, you

can make an international call by adding “+” or selecting “Int’l call” or “Prefix numbers” from the function menu of the enter phone number screen or Phonebook/Redial/Dialed calls/Received calls detail screen.

z Services are not available in some billing plans.

For WORLD CALL, call at general inquiries provided on the back of the manual.

International videophone calls can be made to 3G area-compatible overseas handsets by pressing o (V.phone) after following the dialing procedure below.

z Visit the NTT DOCOMO website for countries

and operators.

z In some types of the other party, international

videophone is not available or the other party’s picture on FOMA is distorted.

Dialing a phone number to make an international call

Dial the phone number in the

following order: 010→Country code→Area code (City code)→ Other party’s phone number

Dial the other party’s phone number excluding “0” at the beginning of the mobile phone number or area code (city code). However, to call to Italy, etc., “0” is required. You can also make an international call by dialing the phone number in the following order: 009130→ 010→Country code→ Area code (City code)→ Other party’s phone number.

The international call is made.

Simple procedures for making international calls

z You can store country codes and international call

access codes in “Int’l dial assistance”.

●

Using “+” to make an international call

“+” changes to “IDD prefix code” set in “Auto int’l call set”, and you can make an international call without dialing the IDD prefix code. z Since “Auto int’l call set” under “Int’l dial assistance”

is set to “ON” (automatically added) by default, the IDD prefix code is automatically dialed.

On the standby screen, dial the

following: + (0 (1 second or longer)) → Country code →Area code (City code)→Other party’s

phone number

Dial the other party’s phone number excluding “0” at the beginning of the mobile phone number or area code (city code). However, to call to Italy, etc., “0” is required.

“Dial”

The international call is made.

■ To make a call without converting “+” into

the IDD prefix code

X“Original Phone No.”

■ To cancel calling

X“Cancel”

●

Making an international call from the function menu

Open the function menu and add the country code and IDD prefix code to make an international call.

z You can use the international dialing function on

the Enter phone number screen or Phonebook/ Received calls/Dialed calls/Redial detail screen.

<Example: To use the international dial function on the enter phone number screen>

Enter the phone number of the

other party

u (FUNC)X“Int’l call”XSelect a

country codeXSelect an IDD Prefix code

The selected country code and IDD prefix code are added. “0” at the beginning of the mobile phone number or area code (city code) is automatically deleted (except when “Italy” is selected for the country code).

The international call is made.

z Even if Caller ID Notification is active, the caller ID

may not appear properly depending on the operator. In this case, calls cannot be made from the Received calls screen.

Country Code setting……

Store up to 22 country names and country codes to use when making international calls. Visit the NTT DOCOMO website for country codes.

XHighlight an itemX

o (Edit)XEnter a country nameXEnter a country code

IDD Prefix setting……Store

the IDD prefix name and IDD prefix code to use when making an international call. Up to 3 entries can be added.

XHighlight an item to store

or editXo (Edit) XEnter an IDD prefix nameXEnter an IDD prefix code

Country Code setting

Function menu¨p.53

IDD Prefix setting

Function menu¨p.59

Country Code setting screen (p.53)

Edit

Delete……Select Delete this/Delete selected/Delete all.

Using Handsfree during a Call

Voice/Videophone Calls/PushTalk

Setting international calls

Set the auto conversion of “+”, and edit or store country codes and IDD prefix codes.

iX“Settings/Service”X

“Dialing”X“Int’l dial assistance”X

<Int’l dial assistance>

Select any item:

Auto int’l call set.……Set the auto conversion of “+”

used when making an international call.

X“ON”XSelect a country codeXSelect an

IDD Prefix code

■To disable auto conversion

X“OFF”

The other party’s voice comes from the speaker during a call.

In-call screen (p.48)Xo ()

“ ” appears and the other party’s voice comes from the speaker during a handsfree call.

While ringing, you can switch to handsfree by pressing o (/).

Voice call Videophone call

■ To release handsfree

XPress o ( ) during a handsfree call

“ ” disappears for voice call or PushTalk. “ ” changes to “ ” for videophone.

●

Notes on use

It is recommended that you keep a distance of about 30 cm from the FOMA terminal during a handsfree call. If it is too close or too far, the other party may find it difficult to hear you or your voice may sound differently.

z Before switching to a handsfree call, move to an

Voice/Videophone Calls/PushTalk

area where your call will not disturb other people.

z When a call is finished, the handsfree setting is

released.

Highlight a Redial/Received calls

entry

■ To make a call after

checking the details of the Redial/Received calls entry

XSelect a Redial/Received

calls entry

Ex. Redial (detail)

Function menu¨p.55

Using the Redial/Dialed Calls/ Received Calls History

Information on the other party’s phone number and the date and time is stored in the Redial/Dialed calls/ Received calls. You can make a call to the other party quickly by using these records.

z When you make calls to the same phone number

repeatedly, the latest entry is saved to Redial and separate entries are saved to Dialed calls.

z Up to 30 phone numbers for voice calls,

videophone calls, and PushTalk calls can be stored in Redial.

z Up to 30 voice call, videophone call, and PushTalk

call entries and 30 packet communication and 64K data communication entries can be stored in Dialed calls/Received calls.

z If the maximum number of entries is exceeded,

older entries are overwritten.

z Redial/Dialed calls/Received calls of PushTalk

→p. 75

<Example: To make a call from the Redial/Received calls list screen>

On the standby screenX

j (Redial) or h (Received calls)

■ To check Dialed calls

XiX“Own data”X“Dialed

calls”

Ex. Redial (list)

Function menu¨p.55

r (voice call), o (V.phone),

@ (PushTalk)

●

Checking the number of missed calls

■ To check only missed calls in Received calls

XiX“Own data”X“Received calls”

The total number of received calls, the number of missed calls and the number of unconfirmed missed calls appear. When you select “Missed calls”, only the missed calls appear.

■Redial/Dialed calls/Received calls icons

Icon

/ / Incoming and Outgoing/Missed/

Unconfirmed missed voice calls

/ / Incoming and Outgoing/Missed/

Unconfirmed missed international voice calls

/ / Incoming and Outgoing/Missed/

Unconfirmed missed videophone calls

/ / Incoming and Outgoing/Missed/

Unconfirmed missed international videophone calls

/ / Incoming and Outgoing/Missed/

Unconfirmed missed PushTalk calls (one-to-one communication)

/ / Incoming and Outgoing/Missed/

Unconfirmed missed PushTalk calls

・ /

(group communication)

Incoming and Outgoing calls in B mode of 2in1

/ Record message/Record VP

message

Received calls with Chaku-moji

Incoming and Outgoing/Missed/ Unconfirmed missed packet

communication

Description

Icon

/ / Incoming and Outgoing/Missed/

*1 : Some icons look different between the detail screen

and list screen.

*2 : Displayed only when 2in1 is in Dual mode.

Unconfirmed missed 64K data communication

Incoming remote monitoring

Incoming packet communication or 64K data communication that is received without an external device connected

Incoming and Outgoing calls when the Time zone is not “GMT+09” regardless of the “Auto time adjust” setting (the summer time is displayed when you set the summer time)

Description

z When you use 2in1, up to 30 entries can be stored

for each phone number. Also, when set to Dual mode, up to 30 Redial/Dialed calls/Received calls entries for both phone numbers and a total of the 60 entries are displayed.

z Activating “Restrict dialing” deletes all Redial/

Dialed calls entries.

z When you make a call by selecting Multi number

from the function menu, the registered name and number of the additional number are displayed under the phone number on the Redial screen (detail)/Dialed calls screen (detail). When you make a call without using the function menu, nothing is displayed even when “Set Multi Number” is set to additional number.

z When “Missed calls display” under “Ring time

(sec.)” is set to “Not display” and you receive a call of which ring tone sounded for a shorter time than the time set in “Set mute seconds”, the call is not displayed in Received calls.

z If the caller is using “Dial-in”, a number different

from the “Dial-in” number may be displayed.

z If the same phone number is registered in multiple

phonebook entries with different names, the names appear in reading order on the Received calls screen.→p.88

z When you have subscribed to Multi number and

make a call from the Received calls screen, the phone call is made from the number that received the call regardless of the “Set Multi Number” setting.

z When you receive a call for the additional number

of Multi number, the registered name of the additional number is displayed under the phone number on the Received calls screen (detail).

Redial/Dialed calls/Received calls screen (p.54)

Notify Caller ID*1→p. 58

Prefix numbers

Chaku-moji

Int’l call

2in1/Multi Num.

Select PushTalk

calls of PushTalk”→p. 75

Ring time

times.

Add to phonebook……Select Add to phonebook/Add to

PushTalk*5/Add to PushTalk Gr.*5 for the registration destination. “Adding entries to the phonebook from Redial, Dialed calls, etc.”→p.86

Look-up phonebook*2……“Accessing the phonebook

from Redial, Dialed calls, etc.”→ p.8 8

Add desktop icon→ p.114

Compose message

Compose SMS

Search location*2……Access the i-mode site and

execute imadoco kantan search using the phone number.

Sent address

Received address

Select image*2……Select My side/Chara-den for an

image used during a videophone call. Select “Release settings” to release the setting.

Big font⇔ Standard font*7……Change the font size of

the displayed name.

Delete……Select Delete this/Delete selected/Delete all.

*1 : Available only on the detail screen. *2 : Not available for PushTalk (group communication)

history screen.

*3 : When the 2in1 setting is set to ON and in Dual mode,

select “Number A”/“Number B”/“Cancel number” (p.422) (unavailable in A mode or B mode). When the 2in1 setting is set OFF, select Basic Number/Additional Number 1/Additional Number 2/ Cancel number (p.419).

*4 : Available only for PushTalk (group communication)

history screen.

*5 : Available only when 2in1 is in A mode or Dual mode,

and a record of A mode is selected. *6 : Available only on the Received calls screen. *7 : Available only on the list screen. *8 : Available only on the Redial or Dialed calls screen. *9 : Not available when 2in1 is in B mode.

*1*2

→p. 59

*1*2

→p. 56

*1*2

→p. 53

*1*2*3

→pp.419, 418

*4*5

……“Redial/Dialed calls/Received

*6*7

……Display missed call entries with ringing

*2*5

→p. 146

*2*5

→p. 182

*8*9

Continued on next page

Voice/Videophone Calls/PushTalk

z Selecting “Delete all” on the Redial/Dialed calls

deletes all Redial and Dialed calls entries. Note that selecting “Delete this” or “Delete selected” for a Redial entry does not delete the entry from Dialed calls, and selecting “Delete this” or “Delete selected” for a Dialed calls entry does not delete the entry from Redial.

Voice/Videophone Calls/PushTalk

z When 2in1 is set to ON, selecting “Delete all” on

the Redial/Dialed calls/Received calls screen deletes all Redial/Dialed calls/Received calls entries in A or B mode regardless of the 2in1 mode.

z Compose mail with a mail address specified as

the recipient when the mail address is stored in the phonebook together with the phone number. If multiple mail addresses are stored, the first address is used.

Using Chaku-moji

When making a voice call or videophone call, send a message (Chaku-moji) to the other party to show a summary of the call, etc. beforehand.

z 5 Chaku-moji messages are stored at the time of

purchase. You can change the pre-installed Chakumoji messages.

z You can include pictograms or face marks in

Chaku-moji, and you can send a message of up to 10 characters including pictograms/symbols/ double-byte characters/single-byte characters.

z For details on Chaku-moji and the compatible

models, refer to the NTT DOCOMO website or “Mobile Phone User’s Guide [Network Services]”.

z Chaku-moji is not compatible with PushTalk.

<Chaku-moji>

Adding, editing and setting messages

iX“Settings/Service”X

“Network service”X“Chaku-moji”

XSelect any item:

Create message……Store or

edit frequently used Chakumoji. Up to 30 Chaku-moji messages (including 5 preinstalled) can be stored.

XHighlight an item to store

or editXo (Edit)XEnter Chaku-moji

Create message list

Function menu¨p.56

MSG display settings……Set the Chaku-moji

display setting for an incoming call with Chaku-moji.

Display all messages

Only number in PH-book……Display only

Chaku-moji messages from senders stored in the phonebook.

Calls with Caller ID……Display only Chaku-

moji messages from senders providing the caller ID.

Hide all messages

3D message display……Set whether to display

Chaku-moji in 3D animation.

Create message list screen (p.56)

Edit

Delete……Select Delete this/Delete selected/Delete all.

z You cannot delete the pre-installed Chaku-moji.

Even when you change a pre-installed Chaku-moji and delete the Chaku-moji, it is restored to default.

Making a call with a message

You can add Chaku-moji when making a voice or videophone call from the “Enter phone number” screen and the detail screen of the “Phonebook”, “Redial”, “Dialed calls” or “Received calls”.

<Example: To make a call with Chaku-moji from the enter phone number screen>

Enter phone number screen (p.48)

Xu (FUNC)X“Chaku-moji”X

Select any item:

Create message……Enter Chaku-moji. Up to 10

characters can be entered.

Select message……Select a stored Chaku-moji.

You can edit Chaku-moji by pressing o (Edit) on the message selection screen.

Sent messages……Select a previously sent

Chaku-moji. You can edit Chaku-moji by pressing o (Edit) on the sent message screen.

■ To delete the entered Chaku-moji (to make

a call without Chaku-moji)

Xu (FUNC)X“Chaku-moji”X“Create

message”XClear the entered text

r (voice call), o (V.phone)

When the other party’s terminal receives Chakumoji, “Transmission completed” appears.

z Charges apply to send Chaku-moji. Charges do

not apply to receive Chaku-moji.

z You can store up to 30 Chaku-moji in Sent

messages (when 2in1 is active, up to 30 sent messages in each mode, and in Dual mode, up to 30 in each mode and a total of up to 60 sent messages are stored). When you send the same Chaku-moji repeatedly, only the latest one is recorded. When the number of entries exceeds the maximum, older entries are overwritten.

z If the receiver’s terminal is under the following

conditions, Chaku-moji cannot be sent. In this case, no sending charges apply.

• The terminal does not support Chaku-moji (“Transmission failed” appears)

• Chaku-moji does not appear on the receiver display due to the “MSG display settings” on the receiver terminal (“Transmission failed” appears)

• Public mode (Driving mode) is set

• The ringing time for Record message is set to 0 seconds

• “ ” is displayed or the power is off

z Depending on the signal quality, the transmission

result may not appear on the sender terminal even when the receiver terminal receives Chaku-moji. In this case, sending charges apply.

z You cannot send or receive Chaku-moji overseas.

●

When you receive a voice or videophone call with a message

The Chaku-moji appears on the ringing screen. The Chaku-moji disappears when you answer the call.

z The received Chaku-

moji is displayed in 3D animation.

Chakumoji

Ex. Voice call

z Even when you receive a call whose ring tone

sounded for a shorter time than the time set in “Set mute seconds” under “Ring time (sec.)”, Chaku-moji is displayed and recorded in Received calls.

z Some pictograms are not displayed in 3D

animation.

z Depending on the status of the sender or receiver,

Chaku-moji may not be displayed even when you receive a call with Chaku-moji.

z When the Original lock is set on “Chaku-moji”,

Chaku-moji is not displayed even if you receive a call with Chaku-moji. You can view the Chaku-moji in Received calls after releasing the lock.

●

Displaying a message from Received calls

When you receive Chaku-moji, the “ ” icon appears on the Received calls entry, and you can check the Chaku-moji on the “Received calls” screen (detail).

z Even when you make a call using the Received

calls entry, the Chaku-moji in the entry is not sent.

Voice/Videophone Calls/PushTalk

Showing/Hiding Caller ID When Making a Call

Sending Push Signals Quickly

Adding the “186”/“184” prefix to the other party’s phone number

To show your caller ID, add the “186” prefix when you

Voice/Videophone Calls/PushTalk

dial the phone number. To hide your caller ID, add the “184” prefix.

z Adding the “186” or “184” prefix to phone numbers

is not valid when making PushTalk calls.

■To show your phone number

186 - (The other party’s phone number)X r (voice call) or o (V.phone)

■To hide your phone number

184 - (The other party’s phone number)X r (voice call) or o (V.phone)

Showing/Hiding your caller ID from the function menu

Show/Hide your caller ID using the function menu of a detail screen such as “Enter phone number” screen, “Phonebook”, “Received calls”, “Dialed calls” or “Redial”.

<Example: To make a voice call from the Enter phone number screen>

Enter the phone number of the

other party

u (FUNC)X“Notify Caller ID”X

“OFF” or “ON”

■ To release the “Notify Caller ID” setting

X“Cancel prefix”

When “Cancel prefix” is selected, the “Caller ID Notification” setting applies.

r (voice call), o (V.phone)

Use services such as ticket ordering or checking bank balances by sending push signals from the FOMA terminal.

Storing dialing data as pause dial record entries

Register dialing data used as push signals to Pause dial beforehand. Inserting p (pause) into the dialing data allows you to send data with a separation where a pause lies.

z Only a single entry can be saved. z You can enter characters from 0 to 9, #, *, and p

(pause) for dialing data.

z You cannot enter p (pause) in succession or at the

beginning of the dialing data.

iX“Settings/Service”X

“Dialing”X“Pause dial”

■ If there is dialing data

already stored

The stored dialing data appears.

Pause dial

Function menu¨p.58

o (Edit)

Press 0 to 9, q or w to enter dialing data.

■ To enter p (pause)

Xw (1 second or longer)

Enter dialing data

Pause dial screen (p.58)

Edit

Send pause dial……Enter the phone number of the other

party and send the dialing data. Each time you press r, the dialing data up to p (pause) is transmitted.

Delete

Transmitting dialing data as pause dial

iX“Settings/Service”X

“Dialing”X“Pause dial”X

d (Send)

Dial the phone number of the

destination

A call is made to the entered phone number and the dialing data up to the first p (pause) is displayed while the dialed phone is ringing. p (pause) is not displayed.

Each time you press r, the dialing data up to p (pause) is transmitted. When the last number is sent, the in-call screen reappears.

■ To transmit all dialing data at once

Xj (1 second or longer)

It may not be possible to send all the data at once to some recipients.

z Some phones may be unable to receive push

signals.

“Send at one time”

Enter a number (prefix)

You can enter up to 10 digits.

Prefix setting screen (p.59)/ IDD Prefix setting screen (p.53)

Edit, Delete this, Delete*, Delete all……Select an

option.

*: “Delete” appears on the IDD Prefix setting screen.

Making a call with a prefix number

z You can add prefix numbers on the “Enter phone

number” screen and the detail screen of “Phonebook”, “Received calls”, “Dialed calls” or “Redial”.

<Example: To make a voice call by adding a prefix number on the enter phone number screen>

Enter the phone number of the

other party

u (FUNC)X“Prefix numbers”X

Select a stored nameXr

Voice/Videophone Calls/PushTalk

Using the Prefix Function

Store prefix numbers such as IDD Prefix code and 186/184 for showing/hiding your caller ID beforehand and add these prefix numbers when you make calls.

Storing prefix numbers

z Up to 7 prefix numbers can be stored. z You can enter characters from 0 to 9, #, * and +.

“Settings/Service”

“Dialing”X“Prefix setting”

Highlight an item to store or change

o (Edit)

Enter a name

Prefix setting

Function menu¨p.59

Setting Sub-Address When Making a Call

Set whether to specify “*” in the phone number as a separator so that the digits following “*” are recognized as a sub-address (ON or OFF).

z Sub-addresses are used in ISDN to identify calls

made from specific communications devices and to select content in “V-live”.

z In the following cases, “*” does not function as a

“Settings/Service”

“Dialing”X“Sub-address setting”

“ON” or “OFF”

sub-address separator. The number including “*” is recognized as an ordinary phone number.

• When “*” is entered at the beginning of a phone

number

• When “*” immediately follows “186” or “184” at

the beginning of a phone number

• When “*” immediately follows a number

entered using “Prefix numbers”

• When the phone number contains “*590#”, “*591#” or “*592#”

<Sub-address setting>

Setting the Alarm for Reconnection

When the signal quality deteriorates during a voice/ videophone call or PushTalk communication and the call disconnects, the FOMA terminal will automatically reconnect the call if the signal quality

Voice/Videophone Calls/PushTalk

quickly improves. Set the type of alarm when a call is reconnected.

z The time required for reconnection varies

depending on communication conditions or the signal quality. It takes about 10 seconds.

z Call charges also apply until reconnected (up to

“Settings/Service”X“Talk” “Reconnect signal”XSelect an alarm tone

Select “No tone”, “High tone” or “Low tone”.

about 10 seconds).

z The effect may vary depending on the other

party’s voice, etc.

z The ambient noise detected via the microphone

activates this function. It may be activated by your voice.

Blocking Out Ambient Noise

This function suppresses ambient noise and makes it easier for the other party to hear you during a voice/ videophone call or PushTalk call.

“Settings/Service”X“Talk” “Noise reduction”X“ON” or “OFF”

Making a Handsfree Call While Driving

<In-car hands-free>

Making the Earpiece Sounds Clear

This function detects ambient noise and makes the other party’s voice clear during a voice or videophone call.

z When handsfree is on or an external device such

as flat-plug earphone/microphone with switch (optional) is connected, this function is disabled.

In-call screen (p.48)

p (//)

Pressing p switches the setting in the following order: “High”

High……Activate the function even when quiet,

regardless of the ambient noise.

Low……Activate the function only when the ambient

noise is high.

OFF……Deactivate the function.

■ To set from the main menu

XiX“Settings/Service”X“Talk”X“Hyper Clear

Voi ce ”X“High”, “Low” or “OFF”

z This function changes the sound quality or

volume. Change the setting if necessary.

→“OFF” →“Low”.

You can make or receive voice calls with handsfree devices by connecting the FOMA terminal to handsfree devices such as In-Car Hands-Free Kit 01 (optional) or a car navigation system. For information on how to use the handsfree device, refer to the manual provided with the device. The FOMA In-Car Hands-Free Cable 01 (optional) is required to use the In-Car Hands-Free Kit 01.

z To operate from the handsfree device, set the

USB mode to “Communication mode”.

z The display and ring tones used for incoming calls

and mail follow the FOMA terminal settings.

z When the handsfree device is set to emit sounds,

the ring tone comes from the handsfree device even when in Manner mode or the Ring volume is set to “Silent”.

z When the Public mode (Driving mode) is set,

operation for incoming calls and mail follows the “Public mode (Driving mode)” settings.

z When Record message is set, operation for

incoming calls follows the “Record message” settings.

z When the FOMA terminal is set to emit sounds,

operation when the FOMA terminal is folded during a call follows “Setting when folded”. When the handsfree device is set to emit sounds, folding the FOMA terminal does not affect the call status regardless of the “Setting when folded” setting.

Receiving a Voice/ Videophone Call

Receive a voice or videophone

call

The ring tone sounds and the illumination flashes.

■ When you receive a call with Chaku-moji

The Chaku-moji appears on the ringing screen or videophone ringing screen. →p.57

Ringing

Function menu¨p.61

■ To put a voice/videophone call on hold while ringing→p.64

■ To answer a videophone call with the substitute image

Xd (Subst.)

■ Operations during a videophone call

You can perform various operations such as changing the camera image to the substitute image, activating the rear camera and muting sounds during a videophone call. →p.48

■ To set Hyper Clear Voice→p.60

■ When the other party switches a voice/ videophone call during a call →p.62

■ To put the current voice/videophone call on hold→ p.64

■ To switch between the FOMA terminal and

Bluetooth device (p.388)

Xr (1 second or longer)

To end the call, press y

Videophone ringing

Function menu¨p.61

Display while receiving a call

■When the other par ty’s phone number is

notified

The other party’s phone number appears on the screen. When the caller is stored in the phonebook, the name stored in the phonebook appears (only the name is displayed while Keypad lock is set).→p.84

z If the same phone number is registered in

multiple phonebook entries with different names, the first name retrieved by Search reading appears.→ p.88

z If the caller is stored as secret data, the name,

etc. do not appear but only the phone number appears.

z When you receive a call for the additional

number of Multi number, the registered name of the additional number is displayed on the ringing screen.

■When the other par ty’s phone number is

not notified

The reason appears.

Ringing screen/Videophone ringing screen (p.61)

Call Rejection……Terminate the incoming call without

answering it.

Call Forwarding……Forward the call to the forwarding

number regardless of the Activate/Deactivate setting of Call Forwarding.

Voice Mail……Connect the call to the voice mail service

center regardless of the Activate/Deactivate setting of Voice Mail.

Change Display……Switch the display from the additional

number 1 or 2 to the number from which the call is forwarded. This can be selected when the received multi number call (for additional number 1 or 2) was forwarded.

z You can answer a call using a flat-plug earphone/

microphone with switch (optional).→ p.386

z If you have subscribed to the Call waiting, Voice

mail or Call forwarding service and you activate “Set in-call arrival” and set “Incoming Call Mng” to “Answer”, you will hear a short double beep (“bibip”) when you receive a call during a call.

• If you subscribe to the Voice Mail or Call Forwarding service, you can answer a call after ending the current call.

• If you subscribe to the Call Waiting service, you can answer a voice call after putting the current call on hold, and you can answer a videophone call after ending the current call.

Voice/Videophone Calls/PushTalk

Continued on next page

z You can set the operation for calls from callers not

stored in the phonebook.→p.138

z You can set restrictions for each phone number

stored in the phonebook.→p.136

z You can also answer a call by pressing

o (V.phone).

z It may take a few seconds to switch from the

Voice/Videophone Calls/PushTalk

camera image to the substitute image (Charaden) depending on the Chara-den.

When the Other Party Switches a Voice/Videophone Call

When you receive a voice/videophone call, the other party can switch between voice call and videophone call.

z The receiver cannot switch the call. z To switch calls, the receiver needs to set “Ntfy

switch-mode” beforehand.→ p.70

z You can use this function with terminals compatible

with voice call/videophone call switch.

<Example: When the other party switched a voice call to a videophone call>

In-call screen (p.48)XThe other

party switches to a videophone callX“YES”

During switching, a screen appears indicating that the calls are being switched, and voice announcement is played. When a voice call is switched to a videophone call, the camera image is sent to the other party.

■ To send substitute image to the other

party

X“NO”

■ When the other party switches a

videophone call to a voice call

XVideophone in-call screen (p.48)XThe other

party switches to a voice call The videophone call is switched to the voice call.

Using the Dial Keys to Answer a Call

Turn off the ring tone or answer an incoming call quickly.

z Even when set to “Quick silent”, “Any key answer”

z “Any key answer” or “Quick silent” does not work if

z When “Any key answer” is set and you press

“Settings/Service”

“Incoming call”X“Answer setting”

Select any item:

Any key answer……Press any of the following keys

to answer voice calls or PushTalk:

r, d (Talk), 0 to 9, w, t, o, p, a (マナー ), b (voice calls), @ (PushTalk)

* You can answer a videophone call only by normal

key operations (r, d (Subst.) or o (V.phone)).

Quick silent……Stop the ring tone while the caller

continues to hear the ringback tone by opening the FOMA terminal or pressing any of the following keys:

0 to 9, w, t, b, p, a (マナー ) or o (voice calls or PushTalk) To answer the call, press r, d (Answer/Subst.), o (V.phone) (in videophone calls) or @ (PushTalk).

OFF……Answer a call only by normal key

operations.

r, d (Answer/Subst.), o (V.phone) (in videophone calls) or @ (PushTalk)

is active in Manner mode.

you press 5 (ECO mode ON/OFF) or 8 (Privacy angle ON/OFF) for 1 second or longer.

a (マナー) while the FOMA terminal is folded, the voice call is put on hold. At this time, the other party hears the hold tone when “Setting when folded” is set to “Tone on”, but the other party does not hear the hold tone when “No tone” or “End the call” is set.

Folding the FOMA Terminal to End/Hold Calls

Set the operation to be performed when the FOMA terminal is folded during a voice or videophone call.

z In Manner mode, no sound comes from the

z When a flat-plug earphone/microphone with

z Even if set to “Tone on”, folding the FOMA

z This setting does not work during PushTalk

“Settings/Service”X“Talk” “Setting when folded”XSelect any item:

No tone……Mute the sound. For videophone calls,

“Substitute image” is sent to the other party. The other party does not hear the hold tone.

Tone on……Put the call on hold (holding). While the

terminal is folded, the other party hears the hold tone. For videophone calls, the call hold image is sent to the other party.

Speaker ON……Send the hold tone to the

other party and also play it through the speaker.

Speaker OFF……Send the hold tone to the

other party only.

End the call……End the call. This is the same

operation as pressing y.

speaker even if set to “Speaker ON”.

switch (optional) is connected, this function is disabled.

terminal activates “No tone” when “Call Waiting” is switched on.

communication. The operation follows “Setting when folded” of the PushTalk settings.

Adjusting the Earpiece Volume

On the standby screenX

c (1 second or longer)XUse c

to adjust volume

Pressing c (1 second or longer) displays the earpiece volume screen. If no operation is performed for 2 seconds or longer while the earpiece volume screen is displayed, earpiece volume adjustment ends.

Adjust the volume between 6 steps from “Level 1” (quietest) to “Level 6” (loudest).

■ To adjust the earpiece volume during a

call

During a voice call: c (1 second or longer) During a videophone call: c

• a ( マナー) or s (C) is also available to adjust

volume.

z The volume setting adjusted during a call is

retained after you end the call.

z You can also adjust volume during PushTalk or

handsfree call.

Adjusting the Ring Volume

Adjust the ring tone volume for incoming call, mail, chat mail, MessageR/F or i-concier information between 6 steps. You can also mute or gradually increase volume.

z The ring volume setting specified for “Phone” in

“Settings/Service” “Incoming call”X“Ring volume” Select an item to adjust the volume

Select “Phone” to adjust ring tone volume for voice calls and 64K data communication. Select “Mail”to adjust the ring tone volume for i-mode mail, Area Mail, SMS and packet communication.

Use c to adjust volumeXd (Set)

■ To increase volume gradually

XPress f at “Level 6”

When set to “Step”, the ring volume increases every 3 seconds.

■ To mute the ring tone

XPress g at “Level 1”

The icon on the standby screen indicates which items are set to “Silent”.

: “Silent” is set for “Phone”, “Videophone”

and/or “PushTalk”

: “Silent” is set for “Mail”, “Chat mail”,

“MessageR” and/or “MessageF”

: Both “ ” and “ ” are set

this function is also applied to the “Select ring tone” setting for a voice call, and the alarm tones for “Schedule” and “To Do list”.

Voice/Videophone Calls/PushTalk

Holding Incoming/Current Calls

<Example: To put an incoming call on hold>

While ringingXy

Three short beeps sound and the call is put on hold.

Voice/Videophone Calls/PushTalk

The caller hears an announcement that you cannot answer now, and the call is put on hold.

■ To put the current call

on hold

XDuring a callXt

■ To end the call during on hold/call hold

Press r to resume the call

You can also press t to resume the held call.

z Call charges apply while an incoming call or

current call is put on hold.

Setting the hold tone

Set the announcement to be played to the caller during on hold.

z You cannot change the hold tone played during a

call.

“Settings/Service”X“Talk” “Hold tone setting”X“On hold tone”

Select a tone

Select “Tone 1”, “Tone 2”, “Voice announce 1*” or “Voice announce 2

*: Not available when no voice announcement is

recorded.

”.

Using the Public Mode

Public mode (Driving mode/Power OFF) is an automatic answering service provided for public places and circumstances in which mobile phones should not be used. z When Public mode and network services are set

concurrently, Voice Mail service

and Caller ID Request service*2 take

service precedence over Public mode.

*1: For a voice call whose ring time is not “0 seconds”,

a service activates after the Public mode announcement is played.

*2: When the caller notifies the caller ID, Public mode

activates.

z Public mode does not work for a call from a phone

number registered for Nuisance Call Blocking.

Using Public mode (Driving mode)

When Public mode is set, a caller hears a message that you cannot answer the call because you are driving or in a place where you have to refrain from using a mobile phone (on a train or bus, in a theater, etc.), then the call ends. z Public mode can only be set or released from the

standby screen (can also be set or released when “ ” is displayed.).

z You can make calls when Public mode is set. z This function is not available during data

communication.

z When you receive a call with no caller ID while

Caller ID Request service is set to “Activate”, the caller ID request announcement is played (Public mode announcement is not played.)

On the standby screenX

w (1 second or longer)

Public mode is set and “ ” appears. When you receive a call, the caller hears the announcement “The person you are calling is currently driving or in an area where cellphones should not be used. Please try again later.”.

■ To release Public mode (Driving mode)

XOn the standby screenXw (1 second or

longer) Public mode is released and “ ” disappears.

z The Public mode setting takes priority even when

“Record message” is “ON”.

, Call Forwarding

z The Public mode setting takes priority when

Manner mode is set at the same time.

z If you make an emergency call (110, 119 or 118)

while Public mode is set, Public mode is released.

z The following tones do not sound in Public mode:

• Ring tone for voice call/videophone/PushTalk

• Ring tone for mail and message

• Various alarm tones

• Wake-up tone

• Open-Close sound

• Charge sound

• Software tone for i-αppli

• Ring tone for packet communication/64k data

communication

• Search request notification tone for GPS

●

When Public mode (Driving mode) is set

The ring tone does not sound when a voice call, videophone call or PushTalk call arrives. Calls are logged as “Missed calls” in “Received calls”, and the “Missed call” desktop icon appears on the standby screen.

z A voice caller hears a message that you cannot

answer the call because you are driving or in the place where you have to refrain from using a mobile phone, and then the call ends.

z A videophone caller sees the Public mode video

message on his or her display, and then the call ends.

z An incoming PushTalk call is not answered.

A PushTalk caller sees the “Connection failed” message on his or her display. In a conversation between three or more people, the participating members will know that you are driving.

z When you receive mail, the ring tone does not

sound and the “New mail” desktop icon appears on the standby screen.

z If the power is off or “ ” is displayed, the

announcement for “ ” is played instead of the Public mode message even when Public mode is set. However, in case of PushTalk, “Disconnected” appears on the members’ displays.

Using Public mode (Power OFF)

When Public mode (Power OFF) is set, a caller who made a call while the power is off hears a message that you cannot answer the call because you are in a place where you have to turn off the mobile phone (in a hospital, on an airplane, around a priority seat on a train, etc.), then the call ends.

On the standby screenX

w25251Xr

Public mode (Power OFF) is set (Nothing changes on the standby screen). When you receive a call after setting Public mode (Power OFF) and turning off the power, the caller hears the announcement “The person you are calling is currently in an area where use is prohibited. Please try again later.”.

■ To release Public mode (Power OFF)

XOn the standby screenX

w25250Xr

■ To check the Public mode (Power OFF)

setting

XOn the standby screenX

w25259Xr

●

When Public mode (Power OFF) is set

The setting is valid until “*25250” is dialed to release Public mode (Power OFF). The setting is not released by simply turning on the power. The Public mode (Power OFF) announcement is played even when you are out of service area or where the reception is very poor.

z A voice caller hears a message that you cannot

answer the call because you are in a place where you have to turn off the mobile phone, and then the call ends.

z A videophone caller sees the Public mode (Power

OFF) video message on his or her display, and then the call ends.

z An incoming PushTalk call is not answered. A

PushTalk caller sees the “Connection failed” message on his or her display. In a conversation between 3 or more people, the participating members will know that you are not participating.

Voice/Videophone Calls/PushTalk

When You Cannot Answer an Incoming Call

When you could not answer an incoming call, appears on the standby screen. When you select , you can check the date, time and caller’s name of the call.

Voice/Videophone Calls/PushTalk

z “Desktop icons providing information”→ p.114

On the standby screenXdX

Select “ ”

The “Missed call list” screen appears.

To check information with the FOMA terminal folded

When there is a missed call, new mail (i-mode mail, Area Mail, SMS) or new chat mail, the incoming call lamp keeps flashing. Press s (C) to sound the short tone.

Press s (C) with the FOMA

terminal folded

A short tone notifies you of the information in accordance with “Info notice setting”.

●

Flashing of the Incoming call lamp

When there is a missed call, new mail, new chat mail or other information, the incoming call lamp keeps flashing in the respective color set in “Illumination”.

z Phone/Videophone: Color set for “Phone” z New mail: Color set for “Mail” z New chat mail: Color set for “Chat Mail”

■Flashing colors and conditions

z The lamp does not flash when “Missed info” under

“Illumination” is set to “OFF”.

z When “Gradation” under “Illumination” is set, the

lamp flashes in the default color.

z You can configure individual illumination settings in

the phonebook.→p.91

z The lamp does not flash in Public mode (Driving

mode).

■To turn off the lamp

z Select the icon for “Missed call”, “New mail” or

“Chat mail” on the display to check information, or press t (1 second or longer).

Setting the notification method for missed calls

Set the notification method to be performed when s (C) is pressed with the FOMA terminal folded. z The setting items and notification methods using

s (C) are as follows:

■When there is a missed call, new mail, etc.

Setting

item

ON The “Pipip, pipip”

■When there is no missed call, new mail, etc.

Setting

item

ON The “pipipip”

*1 : Vibration works when “Phone” of “Vibrator” is not set

to “OFF”.

*2 : When the color of “Illumination” is set to “Gradation”,

the lamp flashes in the default color.

Tone and

vibration

tone plays.

Tone and

vibration

tone plays.

iX“Settings/Service”X

“Incoming call”X“Info notice

Illumination

The incoming call lamp lights for about 6 seconds in the color set for “Illumination”. If there are different types of information such as call and mail, the lamp changes to each of the corresponding color at 1-second intervals.

Illumination

The lamp flashes in “Color 12” for about 6 seconds.

setting”XSelect “ON” or “OFF”

z This function alerts you using a “YES” indication

when a desktop icon such as “Missed call”, “New mail” or “Chat mail” is displayed on the standby screen.→ p.114

z You cannot use s (C) to check for missed calls or

new mail in the following cases:

• When Side key guard is set to “ON”

• When playing music with Music Player/ Music&Video Channel

z The volume is determined by “Phone” under “Ring

volume” (if set to “Silent” or “Step”, the volume will be “Level 2”).

z Opening the FOMA terminal during notification

stops the notification.

Having the Caller Leave a Message

Have the caller leave a message on your FOMA terminal when you cannot answer a voice or videophone call.

z Each message can be up to 20 seconds long, and

5 messages can be recorded for voice calls and 2 messages can be recorded for videophone calls.

Setting Record message

z To give priority to the “Record message” function

z If the mute time set for “Ring time (sec.)” is longer

z You can use “Ring tone/Image” (individual) to set

“Settings/Service” “Incoming call”X“Record message”

ON……Select Japanese 1/Japanese 2/English/

Voice announce 1*/Voice announce 2*.

OFF……Release the Record message setting.

*: Not available when no voice announcement is

recorded.

Enter the ringing time (000 to 120 seconds in 3 digits)

Record message is set, and “ ” and “ ” appear on the standby screen.

when “Voice Mail”, “Call Forwarding” and “Record message” are set simultaneously, set the ringing time of Record message shorter than that of Voice Mail and Call Forwarding.

than the ringing time set for Record message, Record message activates without ringing. To activate Record message after ringing, set the Record message ringing time longer than the mute time.

an answer message for each phone number and “Ring tone/Image” (group) to set an answer message for each group.

Select any item:

When “Record message” is set to “ON” and you receive a call

Record message activates when the set time has elapsed.

z The voice caller hears the answer message, and

recording starts.

z To a videophone caller, the “伝言メモ準備中

Preparing” image is sent, the answer message is played, the “伝言メモ録画中 Recording” image is sent, then recording starts.

■When message recording starts

z The recording screen appears. The caller’s voice

can be heard through the FOMA terminal earpiece during recording.

■To answer a voice call during

recording

■To answer a videophone call

during recording

XPress r to answer with the

camera image or d (Subst.) to answer with the substitute image

■When message recording ends

z The previous screen reappears

and the “Missed call” desktop icon and “Record message”/ “Record VP message” desktop icon appear on the standby screen. You can check the content by selecting one of the desktop icons.→ p.6 8

z The number of recordings is indicated by icons in

the icon display area at the top of the screen.

- : Record message (the number indicates

the number of messages)

/ : Record VP message (the number

indicates the number of messages)

* When Auto voice memo is set to ON, the following

icons appear but the number of messages does not:

: Record message

: Record message and Auto voice memo

z When Manner mode is set, you cannot hear the

caller’s voice during recording.

z You cannot answer another call during recording.

Ex. Voice call

Voice/Videophone Calls/PushTalk

Having the Caller Leave a Message for an Incoming Call

Even when “Record message” is not set to “ON”, you can record a message while receiving a call by pressing a key.

Voice/Videophone Calls/PushTalk

While ringingXs (C)

Message recording starts.

■ To set Manner mode when recording starts

XWhile ringingXq

z You cannot set “Record message” to “ON” with

this operation.

z When the messages are full and you receive a voice

or videophone call, Record message does not activate and the FOMA terminal keeps on ringing (when q is pressed, the ringing continues in accordance with the “Manner mode set” setting).

Playing/Erasing Recorded Messages, Voice Memos or VP Memos

z When there is an unplayed recorded message,

“ ” (Record message) or “ ” (Record VP message) appears on the standby screen.

<Example: To check an unplayed recorded message>

On the standby screenXdX

Select “ ” (Record message) or “ ” (Record VP message)

“★ ” appears for the recorded item.

■ To play a message with

a menu operation

XiX“LifeKit”X“Play/

Erase msg.” or “Play/Erase VP msg.”

Play/Erase msg.

Function menu¨p.69

Select an item to play

A beep sounds and playback starts. When the playback ends, two short beeps sound and the “Play/Erase msg.” screen reappears. You can also play a message by pressing

Ss ( ) on the standby screen.

■ To play the next message while playing

a message

XSs ()

Each time you press Ss ( ), the messages are played in the following order: Record message →Voice memo →Auto voice memo.

■ To stop playback

XXd (Stop) or Wt

The “Play/Erase msg.” screen reappears.

Playback starts. When the playback ends, the “Play/Erase VP msg.” screen reappears.

■ To play another message while playing a

message

XXv

■ To adjust volume while playing a

message

XXc

■ To switch the speaker on/off while

playing a message

XUu (FUNC)X“Speaker ON” or “Speaker

OFF”

■ To pause playback

XXd (Stop)

To resume playback, press Xd (Play)

■ To stop playback

XWt

The “Play/Erase VP msg.” screen reappears.

■ To make a voice call, videophone call, or

PushTalk call to the displayed phone number during playback

Xr (voice call), o (V.phone), @ (PushTalk)

Only one-to-one communication is possible for PushTalk.

■ To erase a message being played

Xu (FUNC)X“Erase”X“YES”

z When 2in1 is in A mode or B mode, “ ★” does not

appear for a message recorded under the unused phone number. When set to “Dual mode”, “★ ”

appears for messages recorded under both phone numbers.

Play/Erase msg. screen (voice/ video) (p.68)

Play, Delete this, Delete rec. msg.*, Delete all……

Select an option.

*: Available only on the Play/Erase msg. screen.

Using Chara-den

Send a cartoon character instead of your own image when you make a videophone call. “Chara-den” →p.329

z You can display your favorite Chara-den if you set

“Substitute image” under “Select image” to “Charaden” beforehand. You can also use Chara-den by setting Chara-den in a phonebook entry or as Ring tone/Image.

z To switch from the camera image to Chara-den

during a videophone call, select “Substitute image” from the function menu.

When you receive a videophone

call, press d (Subst.)

Control your character by

pressing dial keys

Setting Videophone Functions

“Settings/Service”

“Videophone”

Select any item:

Visual preference……Select Normal/Prefer img

qual/Prefer motion spd.

Select image→ p.70

Auto redial as voice……Set whether to switch to a

voice call when a videophone call cannot be made (ON or OFF).

Remote monitoring→ p.72

Display setting……Set an image to display on the

main display or how to display your own camera image.

Main display……Select Other side/My side as

an image to display on the main display.

Front camera Reverse……Set whether to

display your camera image as a mirror image (ON) or normal image (OFF) on your FOMA terminal.

Ntfy switch-mode→p.7 0

Hands-free switch……Set whether to switch to

handsfree automatically when star ting a videophone call (ON or OFF).

V-phone while packet→p.7 0

Videophone settings

Voice/Videophone Calls/PushTalk

Chara-den

Pressing a dial key makes the character perform the action assigned to the key. “Using Chara-den characters”→ p.329

Setting an image to send during videophone calls

Set an image to send instead of the camera image.

z You can set a JPEG image whose file size is 100K

bytes or less and not larger than 854 dots wide × 854 dots high, or a GIF image whose file size is 100K bytes or less and not larger than 854 dots wide x 480 dots high or 480 dots wide × 854 dots

Voice/Videophone Calls/PushTalk

high (except file-restricted images).

Videophone settings screen (p.69)

“Select image”XSelect any item:

On hold, Holding, Substitute image, Record message, Preparing, Voice memo

Select an image to send

Pre-installed……Send only a message.

Original……Send an image and message. To

change the image, select “Change setting” from the function menu then select an image from My picture.

Chara-den*……Send the image selected as

“Substitute image”. Function menu of the “Chara-den list” screen →p.330 Chara-den priority →p.85 To change the Chara-den, select “Change setting” from the function menu then select Chara-den from the Chara-den list.

*: Available only when “Substitute image” is

selected.

Setting switch between voice call and videophone call

Set whether to let the other party know that your FOMA terminal supports switching between voice call and videophone call.

z Calls cannot be switched when set to “Indication

OFF”.

z You cannot set this function during a call or while

“ ” is displayed.

Videophone settings screen (p.69)

“Ntfy switch-mode”XSelect any

item:

Indication ON, Indication OFF……Activate/

Deactivate Ntfy switch-mode.

Check Indication……Display the “Ntfy switch-

mode” setting status.

Setting the answer mode for a videophone call incoming during i-mode

z As the multi access function cannot be used for

videophone, incoming videophone calls during i-mode communication or while sending or receiving mail are handled according to this setting. →p.463

Videophone settings screen (p.69)

X“V-phone while packet”XSelect

<V-phone while packet>

any item:

V-phone priority……Switch to the videophone

ringing screen. When you answer the incoming videophone call, i-mode communication is disconnected.

Packet downld priority……Reject the incoming

videophone call.

V-phone answerphone……Connect the call to the

Voice Mail service center if you have subscribed to the Voice Mail Service, regardless of the Activate/ Deactivate setting of Voice Mail. If you have not subscribed to this service, “Packet downld priority” applies.

Call forwarding……Forward the call to the

forwarding number if you have subscribed to the Call Forwarding Service, regardless of the Activate/ Deactivate setting of Call Forwarding. If you have not set a forwarding number or subscribed to this service, “Packet downld priority” applies.

z If the signal quality deteriorates during a

videophone call, the image may become grainy or patchy regardless of the settings in “Visual preference”.

z If you delete the original still image, the “Pre-

installed” image is displayed (sent).

z When the Chara-den character set as the

substitute image is deleted and the “Chara-den” substitute image cannot be displayed, the preinstalled “ビーンズ (Beans)” is sent. If you delete the pre-installed “ビーンズ (Beans)”, the “Preinstalled” substitute still image is sent.

z When a videophone call is switched and redialed

as a voice call, not digital communications charges but voice call charges apply.

z When a call is redialed, only the voice call is

logged in “Redial”/“Dialed calls”.

z Even if “Auto redial as voice” is set to “ON”, dialing

may not be possible depending on the network or other party, e.g. the line is busy.

<Hands-free switch>

z Even when “Hands-free switch” is set to “ON”,

handsfree does not activate automatically in the following cases:

• While Manner mode is set

• When a flat-plug earphone/microphone with switch (optional) is connected (the microphone operation is in accordance with “Headset mic. setting”)

• When holding a call or Record message is activated for an incoming call

<V-phone while packet>

z Even when “V-phone priority” is set, you cannot

answer a videophone call if you are using multi access such as i-mode communication during a voice call.

z When set to “Packet downld priority”, “V-phone

answerphone” or “Call forwarding”, received videophone calls are recorded as “Missed calls” in “Received calls”.

z Even when set to “V-phone priority” or “Packet

downld priority”, the “Voice Mail” or “Call Forwarding” service is activated if the ring time for the “Voice Mail” or “Call Forwarding” service is set to 0 seconds.

To enlarge an image to be sent

Enlarge your image and send it to the other party during a videophone call.

z When you are using the rear camera, the image

can be adjusted between 16 steps from 1× to approximately 4×. When you are using the front camera, the image can be adjusted between 2 steps, 1× and approximately 2×.

z The zoom ratios are retained if you switch between

the front camera and rear camera during a videophone call. If you end the videophone call, the zoom ratio returns to 1× (standard).

z The substitute image being sent cannot be

enlarged.

During a videophone callXUse v

to adjust the ratio

Decorating the videophone call screen

Decorate your videophone call screen (your camera image) with a stamp and frame.

Videophone in-call screen (p.48)X

u (FUNC)X“Decoration”X

Select any item:

Frame……Select a frame from the Frame selection

screen.

Stamp……Select a stamp from the Stamp selection

screen and decide the paste position.

■To erase a frame or stamp

Select “Off decoration” from the function menu of the videophone in-call screen.

z If “Front camera Reverse” is set to “OFF” for your

camera image, the decoration is displayed normally, and a stamp with text can be read correctly.

Sending a message during a videophone call (sending camera image)

Videophone in-call screen (p.48)X

u (FUNC)X“Petit message”X

Enter a message

The message is displayed. The message disappears automatically in approximately 15 seconds.

■ To cancel entering a message in text entry

XErase the messageXt

■ To erase the message manually after it is

displayed

Xt (1 second or longer)

You can also erase a message by selecting “Off decoration” from the function menu.

z If “Front camera Reverse” is set to “OFF” for your

camera image, the decoration is displayed normally, and text can be read correctly.

Voice/Videophone Calls/PushTalk

Using Videophone Connected to External Devices

You can make or receive videophone calls from external devices such as a PC by connecting the FOMA terminal to the device using the FOMA USB Cable with Charge Function 01/02 (Optional).

Voice/Videophone Calls/PushTalk

To use this function, you have to install a videophone application on the dedicated external device or PC and prepare commercially available devices such as an earphone/microphone and USB compatible Web camera.

z Set USB mode to “Communication mode”. No

specific settings are required to connect external devices.

z For details on the operating environment, settings,

operating procedure of the videophone application, refer to the manuals supplied with the external devices.

z “ドコモテレビ電話ソフト” (DOCOMO Videophone

Software) (Japanese) is compatible with this function. Download the software from the website (Japanese). (For details on the PC operating environment, etc. refer to the support website.)

http://videophonesoft.nttdocomo.co.jp/ (Japanese)

z You cannot make a videophone call from the

external device during a voice call.

z When you have subscribed to Call Waiting, Voice

Mail or Call Forwarding and you receive a videophone call from an external device during a voice call, you can answer the call after ending the current call. When you receive a voice call, videophone call or 64K data communication during a videophone call from the external device, you can answer the call in the same way.

Remote Monitoring

Remote monitoring is only available between FOMA terminals or between a FOMA terminal and a phone equipped with a 3G-324M-compatible videophone function. The FOMA terminal can be used as the dialing or receiving phone for remote monitoring.

Preparing the receiving phone

Set the phone number of the dialing phone (Other ID) and the delay until remote monitoring begins (Ringing time) on the phone performing remote monitoring (receiving phone). z Up to 5 other IDs can be stored.

Videophone settings screen (p.69)

X“Remote monitoring”XEnter

your security codeX“Other ID”

Other ID

Function menu¨p.73

Highlight an item to be stored or

changedXEnter the phone number to accept monitoring

Press t to return to the remote

monitoring screen

“Ringing time”XEnter ring time

(003 to 120 seconds in 3 digits)

The ringing time is set.

“Set”X“ON”

“ ” or “ ” appears on the standby screen.

■ To turn remote

monitoring off

X“OFF”

Position the FOMA terminal

During remote monitoring, the image captured with the front camera is sent to the dialing phone. Place the receiving FOMA terminal in the monitoring position, and make sure it is switched on and open. If the FOMA terminal is left open, only the voice is sent and the camera image is not sent. The substitute image is sent with “カメラオフ Camera Off” displayed on the image.

Adjust the angle

Front camera

z When positioning the FOMA terminal, set

“Videophone” under “Vibrator” to “OFF” to prevent the FOMA terminal from moving when calls are received.

z If the ringing time set for “Voice Mail Service” and

“Call Forwarding” on the receiver side is shorter than the ringing time set for remote monitoring, “Voice Mail Service” and “Call forwarding” take priority.

Other ID screen (p.72)

Look-up address……Look up an address in Phonebook,

Dialed calls or Received calls, and enter the address.

Delete this, Delete all……If all IDs are deleted, the “Set”

setting is set to “OFF”.

Starting/Ending remote monitoring

z To perform remote monitoring, make a videophone

call with caller ID (phone number) notified from the FOMA terminal registered as the other ID on the receiving phone.

Make a videophone call to the

receiving phone

After the ringing time set on the receiving phone has elapsed, remote monitoring begins. The video image from the receiving phone is displayed and sound comes from the speaker on the dialing phone.

Dialing phone

■ To answer a videophone call on the

receiving phone without accepting remote monitoring

XPress r before the ringing time elapses

To answer with a substitute image, press d (Subst.).

To end the call, press y

The call duration is displayed and remote monitoring ends. You can also end remote monitoring by pressing y on the receiving phone.

z A call can be received as a remote monitoring call

even when Dial lock or Omakase Lock is set.

z Remote monitoring is not available when the

following functions are set:

• Public mode (Driving mode)

• Manner mode

• Call rejection/acceptation

• Reject unknown

*: When “Call acceptation” is set for a phone number

other than the other ID phone number or “Call rejection” is set for the other ID phone number, or when “Reject unknown” is set and the other ID phone number is not stored in the phonebook

z The specific ring tone is used for remote

monitoring and cannot be changed.

z The ring tone is played at the volume set in

“Videophone” under “Ring volume” (if set to “Silent”, “Level 1” or “Step”, the volume will be “Level 2”).

z You cannot put a call on hold when a remote

monitoring call arrives. Press y to end the call.

z You cannot switch cameras from the receiver

during remote monitoring.

Please be considerate of the privacy of individuals around you when taking and sending photos using camera-equipped mobile phones. Actions that infringe on the rights of others, or involve the taking and sending of pictures that are malicious or against public standards of morality, etc. may be punishable by law or subject to claims for damages.

Voice/Videophone Calls/PushTalk

PushTalk

PushTalk is an all-new communications service that allows a group of up to five people to talk to each other at once. Press the PushTalk key to talk.

* PushTalk communications charges apply each time you

press the key (talk).

z For details on PushTalk and compatible models,

Voice/Videophone Calls/PushTalk

refer to the NTT DOCOMO website or “Mobile Phone User’s Guide [Network Services]”.

●

PushTalk plus

* A separate subscription is required PushTalk plus is a PushTalk communications service that allows a group of up to 20 people to talk to each other at once. This service enhances PushTalk by providing a shared phonebook on the network, or a view of the status of members.

z For details about operations, refer to the brochure

you received at subscription.

Making a PushTalk Call

Enter a phone numberX@

• When the other party answers the call, a tone beeps, and the “PushTalk talking” screen appears.

• The other party’s voice comes from the speaker.

■ To talk with more than

one party

Make a call using the PushTalk phonebook.→p.79

■ To release handsfree

Xo ()

You can set “Hands-free setting” (p.81) to not answer calls using handsfree.

Hold down @ while you talk

• When you obtain the right to speak, a tone beeps, and you can speak.

• While another party is talking, you cannot obtain the right and an error tone sounds.

• When @ is released, a tone sounds, and another member can speak.

• When a flat-plug earphone/microphone with switch (optional) is connected, you can speak by holding down the switch of the ear phone/ microphone.

• When a member leaves a PushTalk conversation (ends the call), a tone sounds.

PushTalk talking

■ Adding members

Even after a PushTalk call has started, you can still call and add members.→ p.76

To end the call, press y

Other parties hear the tone.

■ To rejoin a PushTalk call

Even if you end a call, you can rejoin the call if other parties continue the call. →p.75

<Dial>

z You can also make PushTalk calls using the

regular phonebook, Redial/Dialed calls/Received calls, or Phone To. “PushTalk Redial/Dialed calls/Received calls” →p.75

z The Caller ID setting for PushTalk calls is in accord

with the “Caller ID Notification” (p.46) setting.

z When “Set Caller ID” is set to “ON” and a call is

made, each member who receives the call is notified of all the other members’ phone numbers. When set to “OFF”, “User unset” appears on the PushTalk talking screen of all members who received the call.

z A PushTalk call cannot be made during a voice

call, videophone call, or data communication.

z If a PushTalk call is made during i-mode, the

i-mode communication is disconnected. Also, if a PushTalk call is made while i-αppli is running, the i-αppli stops.

z When a videophone or another PushTalk call, or

64K data communication arrives during a PushTalk call, the new call is recorded in Received calls, and the current PushTalk call remains connected.

z Speaking time is limited with each right to speak.

When the time draws to an end, the speech right release notice tone sounds and a message appears indicating that the duration is almost over. When the duration is over, the speech right will end.

z If the PushTalk button is not pressed by any

member of the group (if nobody speaks) for a given time, the connection is automatically cut.

z The speaker will bear PushTalk communications

charges when the speaker presses @ and a tone beeps (charges apply every time he/she obtains the right to speak).

z Emergency calls (110, 119 and 118) cannot be

made using PushTalk.

z The Outgoing number selection screen appears

when the 2in1 is in Dual mode. Select “Number A”.

z PushTalk calls cannot be made when 2in1 is in

B mode.

<End>

z When “Setting when folded” (p.80) under

PushTalk setting is set to “End the call”, you can end a PushTalk call by folding the FOMA terminal during the PushTalk call. However, when the flatplug earphone/microphone with switch is connected, the call continues.

z Pressing the switch of the flat-plug earphone/

microphone with switch does not end a PushTalk call even if the earphone/microphone is connected.

Guide to the PushTalk talking screen

1 2

5 7

①Current speaker’s name

(“Myself” appears when you are speaking, and “?” appears for an unknown speaker)

②Name of the group specified when the call was

made (Nothing appears if no group was specified)

③Members’ names (excluding you) ④Status of members

Calling: The par ty is being paged Connected: The party has joined the

PushTalk call

Disconnected: The party does not answer the

call, or ended the call. Otherwise, the party’s terminal is out of range or turned off.

Driving: Public mode (Driving mode) is

active on the party’s terminal

⑤Number of participants (excluding you) ⑥Elapsed time since the talk started ⑦Handsfree is on

*1 : When the caller has set “Caller ID Notification”

(p.46) or “Set Caller ID” (p.79) to “ON”, the name stored in the phonebook appears. If the caller is not stored in the phonebook, the phone number appears. Also, when the caller has set “Notify Caller ID” or “Caller ID Notification” to “OFF”, “User unset” appears for names of all members.

*2 : “Calling”, “Driving” and “Disconnected” appear

only when three or more people are participating.

●

Joining an ongoing PushTalk call

Perform the following steps to rejoin an ongoing PushTalk call or join after you answered with “Disconnected” when the call arrived:

<Example: To join using “Redial”>

Redial screen (p.54)XHighlight a

PushTalk callX@

If the PushTalk call is still connected, the “PushTalk talking” screen appears.

PushTalk Redial/Dialed calls/Received calls

z One-to-one PushTalk calls and group calls are

recorded separately in PushTalk Redial/Dialed calls/Received calls.

z A group call is recorded as a single entry in Redial/

Dialed calls/Received calls.

z The following are available using a record in each

Call history:

Item

Make a one-toone PushTalk call

Make a PushTalk call to more than one party

Make a voice call/videophone call

Add to the FOMA terminal phonebook

*1 : To make a one-to-one PushTalk call, select “Select

PushTalk” from the function menu of Redial/Dialed calls/Received calls, and select a single party.

*2 : A call can be made to the same group, or to a selected

party in the group.

One-to-one call

history (such as

or )

○ ○

× ○

○×

○○

z A Redial record of a group call will be updated

only when a call is made by selecting the same parties from Radial or Dialed calls. If at least a single party is different, the call is recorded as a different Redial entry.

Group call

history (such as

or )

Voice/Videophone Calls/PushTalk

Adding Members during a PushTalk Call

Call and add a new member to the current PushTalk call.

z Only the original caller can invite a new member.

PushTalk in progressX

Voice/Videophone Calls/PushTalk

p ()XSelect any item:

Phonebook……Select a phone number from a

phonebook entry stored in the FOMA terminal or FOMA card (UIM).

PushTalk phonebook……Select members from the

PushTalk phonebook. You can also open the group list and select group members. “Making a Call Using PushTalk Phonebook”→ p.7 9

Redial, Received calls……Select an entry from

Radial or Received calls.

■ To select an additional member from the

group PushTalk call history

XIn the History listXSelect an entry from group

callsXd (Select)XUse c to select the checkbox (□ )Xo (Finish)

Direct input……Enter a phone number.

o ()

A PushTalk call is made to the added party. After the call is made, the party is added to the list of participants on the “PushTalk talking” screen.

z Up to five parties including the caller can

participate in the call. New parties can be added repeatedly until four parties are called. When four parties have already been called, you can call a party that did not join the call, but a new party cannot be added.

z A new member cannot be added while a PushTalk

call is in progress with five participants. Even if a participant leaves the PushTalk call, a new party cannot be added.

z The added party will not be recorded in Redial/

Dialed calls of the caller or in Received calls of the receiver.

z A party using a ter minal that is not capable of

adding participants can be added. The added member does not appear on a terminal that is not capable of adding participants, and the beep does not sound. Also, a caller using a terminal that is not capable of adding participants cannot add participants.

z When 2in1 is in Dual mode, when a member is

added using “Direct input”, the Outgoing number selection screen appears. Select “Number A”.

Receiving a PushTalk Call

Answer an incoming PushTalk call and join the PushTalk. z When a PushTalk call arrives, the ring tone sounds,

the incoming call lamp flashes, and the “PushTalk” screen appears.

z The names of the caller and

other participants who are being paged (for a group call) appear on the “PushTalk” screen.

While a PushTalk call is being

receivedX@

You can also answer the call with r or d (Answer). When you answer the call, the tone beeps, and the “PushTalk talking” screen appears.

• If the flat-plug earphone/microphone with switch (optional) is connected, you can press the switch of the earphone/microphone to answer the PushTalk call.

■ To not respond (respond with

“Disconnected”)

XWhile a call is being received, press y

Even if you answer an incoming call with “Disconnected”, you can join the call later if other participants are still continuing the PushTalk call. →p. 75

■ To automatically answer PushTalk calls

Select “ON” in “Auto answer setting” (p.80) under PushTalk settings.

Join the PushTalk call

Go to Step 2 in “Making a PushTalk Call” (p.74)

z Pressing s (C) or q while a call is being

received does not activate “Quick message” but disconnects the call. “Disconnected” appears on the other party’s terminal.

z When the Public mode (Driving mode) is active,

the ring tone does not sound and the incoming call lamp does not flash. For a group call, “Driving” appears on the terminals of the other parties.

z You can answer a call using handsfree by

pressing @ when the FOMA terminal is folded.

z Pressing y while a call is being received does

not activate “On hold” but disconnects the call. “Disconnected” appears on the other party’s terminal.

z If a call arrives from a phone number specified in

“Call rejection” or “Reject unknown”, the call is answered with “Disconnected”.

z The members who joined an ongoing PushTalk

call appear on the “PushTalk talking” screen, but they are not recorded in “Group call history ( )”.

z If a PushTalk call arrives during a voice call,

videophone call, another PushTalk call, or data communication, the PushTalk call cannot be answered. However, when the call arrives during a voice call or another PushTalk call, the call is recorded in Missed calls.

z When a PushTalk call arrives during i-mode, the

“Set i-mode arrival act” settings apply.→p.199

Adding an Entry to the PushTalk Phonebook

Add members to the PushTalk phonebook using the FOMA terminal phonebook data (such as phone number).

z Up to 1,000 members can be added.

On the standby screenX@

The “PushTalk phonebook” screen (p.79) appears.

o (New)X“View phonebook”X

Search the phonebook

Searching the phonebook→p. 88

■ To enter directly

Xo (New)X“Direct input” XAdd the

phonebook entry

Open the Phonebook detail screen

XUse v to select a phone

number

A screen appears asking whether to add to the PushTalk phonebook.

■ To add from the Phonebook entry list

screen

XHighlight a phonebook entryXo (Finish)

If the Phonebook entry contains more than one phone number, the phone number saved at the top will be added to the PushTalk phonebook.

“YES”

A new member is added to the member list.

■ If a phone number has been already saved

to the same memory number as you selected

A message appears asking whether to overwrite. Select “YES” to overwrite.

z The entries in the Member list appear as follows:

• When a new member is added to the member list or added to a group, the new member appears at the top.

• The PushTalk phonebook screen retains the last order.

z The PushTalk phonebook is not available when

2in1 is in B mode.

Adding entries to a group

You can create a “Group” in a PushTalk phonebook entry to categorize members.

●

Creating a group

Up to 10 groups can be created.

PushTalk phonebook screen

(p.79)Xu (FUNC)X“Group

setting”X“Compose group”

Enter a group name

The new group name is added to the group list.

Voice/Videophone Calls/PushTalk

●

Adding a member to a group

Add members to the member list in advance.→ p.7 7 Up to 19 members can be added to a group, but a call can only be made to up to 4 members simultaneously.

<Example: To add from a group list>

In a group listXHighlight a group

Xu (FUNC)X“Group Setting”X

Voice/Videophone Calls/PushTalk

“Add member”

The “Group member” selection screen appears.

Use c to select a checkbox (□)

Xo (Finish)

The selected member is added to the group.

z Group members appear as follows:

• After a member is added to a group, the added member appears at the top.

• The member list in the PushTalk phonebook screen retains the last order.

Switching PushTalk phonebook lists

Tab

Member list

(Select the

“Member” tab)

p ()

“Group” tab)

d (Select)

Group list

(Select the

Adding entries to the PushTalk phonebook from Redial, Dialed calls, etc.

Add entries to PushTalk members or a PushTalk group from the “Received calls”, “Dialed calls” or “Redial” screen.

<Example: To add a new entry to a PushTalk group from “Received calls” of voice communications>

Received calls detail screen (p.54)

Xu (FUNC)X“Add to phonebook”

“Add to PushTalk Gr”

■ To add from Redial, Dialed calls, or

Received calls of PushTalk calls (group calls)

XUse c to select a checkbox (□ )

■ To ad d Pu shTa lk m em ber s

X“Add to PushTalk”

■ To add to the FOMA terminal or FOMA

card (UIM)

X“Add to phonebook”

“Adding entries to the phonebook from Redial, Dialed calls, etc.”→p.86

“New”XAdd to the phonebook

■ To add to an existing phonebook entry

X“Add”XSearch the phonebookXOpen the

phonebook detail screenXd (Select)XAdd to the phonebookX“YES”

Select a group

■ To add a new group

X“<New>”XEnter a group name

z “ ” appears next to a record that cannot be

added to the PushTalk phonebook in the PushTalk (group call) Redial/Dialed calls/Received calls.

Group member list

z You can use v to switch pages within the

same tab.

Making a Call Using the PushTalk Phonebook

Select members from the PushTalk phonebook and make a call.

z Up to four members can be specified and called.

On the standby screenX@

PushTalk phonebook

Function menu¨p.79

Use c to select a checkbox (□ )

You can also place a checkmark using 1 to 9 or 0. When the other party answers the call, a tone beeps, and the “PushTalk talking” screen appears. For subsequent steps, go to Step 2 in “Making a PushTalk Call” (p.74)

■ To view checked members before calling

them by pressing @

Xu (FUNC)X“Members to call”

z If all members receiving a call make a

“Disconnected” response, the PushTalk ends.

z When “Caller ID Notification” (p.46) or “Set Caller

ID” (p.79) is set to “ON” and a communication is sent, each member who receives the communication is notified of all the other members’ phone numbers. Take care when informing others of your phone number, as this is important personal information.

PushTalk talking

Making calls from a PushTalk group

In the group listXHighlight a

groupX@

A call is made to all members of the highlighted group.

■ To exclude a member

XSelect a groupXUse c to unselect a member X@

PushTalk phonebook screen (p.79)

z Available options vary depending on the member

list, group list or group member list.

New……Add to the PushTalk phonebook.

View phonebook……Search for a phone number

from the FOMA terminal phonebook and add it to the PushTalk phonebook.

Direct input……Create a new FOMA terminal

phonebook entry and add a phone number to the entry. The added phone number is also added to the PushTalk phonebook.

Set Caller ID……Set whether to show the numbers of all

members (including members added during a PushTalk call) to the members to be called. If “Cancel prefix” is selected, the “Caller ID Notification” setting applies.

Members to call……List members to be called.

PushTalk setting……Configure PushTalk settings.

→p.80

Network connection……Connect to the network to use

“PushTalkPlus”.→ p.74 Available only for PushTalkPlus subscribers.

Sort……Sort the list by specified criteria.

Group setting……Create a new group, add members to

a group, or rename a group.→ p.77

Release all……Release all members in the member list

and group member list.

No. of PushTalk……View the number of members,

groups, and members per group. To switch screens, use b, a (マナー ) or s (C).

Delete→p.8 0

*: The group list cannot be sorted by reading.

z When the Caller ID settings are duplicated, the

priority applies: ①Set Caller ID ②Caller ID Notification

Voice/Videophone Calls/PushTalk

Deleting an Entry from the PushTalk Phonebook

Delete members, groups or group members from the PushTalk phonebook.

Open the list to delete

Voice/Videophone Calls/PushTalk

Member list : Open this list to delete members

Group list : Open this list to delete a group. Group member list

“Switching PushTalk phonebook lists” →p. 78

u (FUNC)X“Delete”XSelect any

item:

Delete this……Delete one member, group, or group

member highlighted in Step 1. To delete a member from the Member list, select whether to delete only the PushTalk phonebook or delete also from the FOMA terminal phonebook.

Delete selected, Delete all……Delete multiple or all

members, groups or group members.

z If a member is deleted from the member list, the

member will be deleted from all groups to which the member belongs.

z Even after a group is deleted, members in the

group will not be deleted from the member list.

z Deleting a group member deletes it only from the

currently displayed group. If the deleted member belongs to another group, it will not be deleted from the group.

from the PushTalk phonebook.

: Open this list to delete a member

in a group.

Setting PushTalk

Configure PushTalk settings.

PushTalk phonebook screen

(p.79)Xu (FUNC)X“PushTalk

setting”XSelect any item:

Auto answer setting……Select whether to answer

a PushTalk call automatically. When set to “ON”, handsfree activates when a call is automatically answered and a member’s voice comes from the speaker regardless of whether the FOMA terminal is folded or opened.

Ring time setting……Set the ring time (from 01 to

60 seconds) when a PushTalk call arrives. After the set time elapses, the call is automatically answered with “Disconnected” and the ring tone stops.

Setting when folded……Set the operation to be

performed when the FOMA terminal is folded during a PushTalk call.

Speaker talk……Continue talking in handsfree

mode. Opening the FOMA terminal restores the status held before it was closed.

End the call……End the call. This is the same

operation as pressing y.

PushTalk arrival act……Set the operation to be

performed when a voice call arrives while a PushTalk call is being made or received, or during a PushTalk call.

Answer……Open the voice call ringing screen.

However, the screen does not open while a PushTalk call is being made or received.

■When answering a voice call using

r during a PushTalk call

The PushTalk call ends and the Voice call screen opens.

■To continue the PushTalk call

XVoice call ringing screenXu (FUNC)X

“Call Rejection”, “Call Forwarding” or “Voice Mail”

Call Rejection……Reject an incoming voice

call.

Voice Mail……Connect the call to the Voice

Mail service center if you have subscribed to the Voice Mail service regardless of the Activate/Deactivate setting of Voice Mail. If you have not subscribed to the service, the “Answer” setting works.

Call Forwarding……Forward the call to the

forwarding number if you have subscribed to the Call Forwarding service, regardless of the Activate/Deactivate setting of Call Forwarding. If you have not subscribed to the service, the “Answer” setting works.

Hands-free setting……Set whether to

automatically activate handsfree when a PushTalk call starts.

z In Manner mode, a call must be answered

manually even if this option is set to “ON”.

z In Public mode (Driving mode), a call is not

answered regardless of the “Auto answer setting”. All participants will know that you are driving.

z When “PushTalk” under “Auto answer setting”

under “External connection” is set to “ON”, this setting is disabled.

z When set to “ON”, this setting takes precedence

over “Ring time setting” (p.80) under PushTalk setting.

z When the flat-plug earphone/microphone with

switch (optional) is connected, the shorter ring time set in “Ring time setting” and “Auto answer setting” takes precedence. If the same ring time is set, “Ring time setting” takes precedence.

z This setting is valid only for PushTalk calls. The

“Setting when folded” setting of voice calls or videophone calls does not apply.

z When set to “Speaker talk” and the FOMA

terminal is folded, the handsfree mode activates regardless of the Manner mode setting.

z When a flat-plug earphone/microphone with

switch is connected, this option becomes invalid. The call remains the same even when the FOMA terminal is folded.

<Hands-free setting>

z When a flat-plug earphone/microphone with

switch is connected, this option becomes disabled and handsfree does not become active automatically.

z When Manner mode is active, this option

becomes “OFF” regardless of the “Hands-free setting”.

Voice/Videophone Calls/PushTalk

Phonebook

Phonebooks Available for the FOMA Terminal ............................................................... 84

Adding Entries to the FOMA Terminal Phonebook ............................... 84

Adding Phonebook Entries from Redial/Dialed Calls etc................................................ 86

Renaming Groups....................................................................................... 86

Making a Call from Phonebook............................................................ 87

Editing Phonebook Entries ...................................................................... 90

Deleting Phonebook Entries .......................................................................... 90

Checking Phonebook Storage Status.................................................... 91

Setting Different FOMA Terminal Actions for Each Phone Number and Mail Address

................................................................................................................ 91

Using Choku-Den .......................................................................................... 92

Using Dialing Shortcuts ......................................................................... 93

Add to phonebook

Group setting

Search phonebook

Edit phonebook

Delete data

No. of phonebook

Ring tone/Image

Choku-Den

Two-touch dialing

Phonebooks Available for the FOMA Terminal

Your FOMA terminal has Phonebook in the FOMA terminal (Phone) for which you can set a range of functions, and UIM phonebook that can also be used in other FOMA terminals. Each phonebook can be used differently for your purpose.

z In addition, there is “PushTalk phonebook” for

PushTalk. You can use the data stored in the

Phonebook

phonebook in the FOMA terminal (Phone) to create entries in the PushTalk phonebook.

Differences between the FOMA terminal (Phone) phonebook and UIM phonebook

■Data stored

Data

stored

Number of entries

Group No Group, Group 01 to 19No Group,

Phone number storage

Mail address storage

Image storage

Other data storage

*: Automatically added/updated when phonebook data is

updated in Data security service. You cannot add them by yourself.

■Features of the FOMA terminal (Phone)

phonebook

The following utility functions can be used with entries stored in the FOMA terminal (Phone) phonebook:

• “Choku-Den” →p. 92

• “Two-touch dialing” →p. 93

• “Ring tone/Image” →p. 91

• “Restrictions” →p.136

• Storing as secret data →p.125

FOMA terminal

(Phone) phonebook

Up to 1,000 Up to 50

4 numbers per entry (4,000 numbers in total in the phonebook)

Select from 23 icons “ ” only

3 addresses per entry (3,000 addresses in total in the phonebook)

Select from 5 icons “ ” only

1 still image and 1 Chara-Den per entry (respectively 100 in total in the phonebook)

Name, Reading, ZIP code, Address, Location information, Birthday, Memo, i-concier address*, i-concier URL*, i-concier memo*

UIM

phonebook

Group 01 to 10

1 number per entry

1 address per entry

−

Name, Reading

• Secret code setting →p.90

• Adding members to PushTalk phonebook→p.78

■Features of the UIM phonebook

Since phonebook entries are stored on a FOMA card (UIM), you can also use the same phonebook entries on another FOMA terminal simply by changing FOMA cards (UIM). This makes the UIM phonebook very useful when you use multiple FOMA terminals.

Displaying names

■Voice and videophone calls

When you receive a call with caller ID notified from someone who is stored in the phonebook, the phone number and caller’s name appear.

When a still image is stored in the phonebook, the image appears. However, depending on the size and amount of data of the stored image, it may take time to display the image. The caller’s name is also displayed in the “Received calls”, “Dialed calls” and “Redial” records.

■Displaying names for i-mode mail and SMS

When you send/receive i-mode mail or SMS to/from someone who is stored in the phonebook, his/her name is displayed in the sent/received mail list/detail screen or address list.

Adding Entries to the FOMA Terminal Phonebook

z An entry cannot be stored unless you fill in the

“Name” field.

iX“Phonebook”X“Phonebook”

Xu (FUNC)X“Add to

phonebook”XSelect a phonebook

XEnter a name

You can enter kanji, hiragana, katakana, alphanumeric characters, symbols and pictograms (Phone only). You can store up to 16 double-byte or 32 single-byte characters for Phone and only 10 double-byte or 21 single-byte alphanumeric characters (including some single-byte symbols) for FOMA card (UIM).

Check the readingXd (Set)

■ When the reading is incorrect

Correct the reading using katakana (single-byte for the Phone or Phone+PushTalk phonebook, and double-byte for FOMA card (UIM)), singlebyte alphanumeric characters and symbols. You can store up to 32 single-byte characters for Phone or Phone+PushTalk phonebook, and only 12 double-byte or 25 single-byte alphanumeric characters (including some single-byte symbols) for FOMA card (UIM).

Select any item:

Select group……Select a group number from

“Group 01-19” for Phone or Phone+PushTalk phonebook, and from “Group 01-10” for FOMA card (UIM). If no group is selected, the entry is automatically assigned to “No Group.”

Enter phone number

• Also select an icon in Phone or Phone+PushTalk phonebook. You can enter up to 26 digits for the phone number.

• Select “ <Not stored>” to add a phone number.

• You can enter up to 20 digits for a blue FOMA card (UIM), and up to 26 digits for a green/white FOMA card (UIM).

Edit mail address

• Enter up to 50 single-byte alphanumeric characters and symbols. Also select an icon in Phone or Phone+PushTalk phonebook.

• Select “ <Not stored>” to add a mail address.

Edit ZIP code, Edit address……Enter up to 50

double-byte or 100 single-byte kanji, hiragana, katakana, alphanumeric characters and pictograms for the address.

Attach location……Select From position loc./

From location history/From image. If you select “Location info detail”, you can confirm the registered latitude, longitude, geographical coordinate system, and positioning level. If you select “Delete location info”, you can delete the registered location information.

Enter birthday……Select Enter birthday and

enter the contact’s birthday (year, month and day). Any year from 1800 to 2099 can be set. Select Reminder and then 1week before/3days before/1day before/On the day. At 0:00 AM on the day registered here, the incoming call lamp flashes and a desktop icon appears on the display to inform you of the notification. →p.115

Edit memorandums……Enter up to 100

double-byte or 200 single-byte kanji, hiragana, katakana, alphanumeric characters and pictograms.

Set image……Shoot or select an image to be

displayed when you receive a call.

Select Chara-den……Select a Chara-den

character to be displayed as the substitute image for videophone calls.

Enter memory No.……Enter any number from

000 to 999 although memory numbers are automatically* assigned when an entry is stored in the phonebook.

*: The smallest available number from 010 to 999 is

assigned. If no number is available from 010 to 999, an available number from 000 to 009 is assigned.

o (Finish)

■ When storage location is Phone+PushTalk

phonebook

When 1 phone number is stored, that number is stored in the PushTalk phonebook. When more than 1 phone number is to be stored, select the phone number to store in the PushTalk phonebook. You can add PushTalk phone numbers and register a group from the PushTalk phonebook. “Adding Entries to PushTalk Phonebook”→p. 77

z Stored phonebook entries containing symbols or

pictograms may not be displayed correctly when data is transferred by infrared communication, etc.

z Enter the correct domain when storing mail

addresses. The domain is the part of the address that follows the “@” symbol. However, if the contact’s mail address is “phone number@docomo.ne.jp”, store only the phone number as the mail address.

z If you use 2in1, “Phonebook 2in1 setting” (p.421)

is also automatically set when adding the entry to the phonebook (Number A is set in A mode, and Number B in B mode). The setting for the “Phonebook 2in1 setting” ( /

/ ) is displayed on the “Phonebook list” screen or “Phonebook detail” screen (only when in Dual mode).

<Chara-den settings priority sequence>

z The priority order for Chara-den settings:

①Chara-den setting for individual Ring tone/ Image

②Chara-den setting for group Ring tone/Image ③Chara-den stored in the phonebook entry ④Substitute image of Select image

Phonebook

When phonebook editing is interrupted

You can resume phonebook editing that was stopped e.g. because the battery ran out or a new task of Tool groups was activated using Multitask.

iX“Phonebook”X“Phonebook”

Xu (FUNC)X“Add to

phonebook”XSelect a phonebook

X“Recall”

Phonebook

When re-editing the entry, if you cancel editing without storing the changes, the data being edited is erased.

■ To add a new phonebook

entry

X“New”

Adding Phonebook Entries from Redial/Dialed Calls etc.

You can add information to the phonebook from “Received calls”, “Dialed calls”, “Redial”, “Received address”, “Sent address”, “Text reader”, site screen, enter phone number screen, etc.

<Example: To add information from the “Received calls” record to the FOMA terminal (Phone) phonebook>

Received calls screen (p.54)X

u (FUNC)X“Add to phonebook”

“Add to phonebook”

■ Redial/Dialed calls/Received calls of

PushTalk (group communication)

XSelect a person (phone number) to add to the

phonebook

■ To add information to the PushTalk

phonebook

X“Add PushTalk” or “Add PushTalk Gr”

“Adding to the PushTalk phonebook from Redial or Dialed Calls record”→p.78

“Phone”

■ To add information to FOMA terminal

(Phone) + PushTalk phonebook

X“Phone+PushTalk”

■ To add information to the FOMA card

(UIM)

X“UIM”

“Add”XSearch for a phonebook

entry

Searching the phonebook→p. 88

■ To add a new phonebook entry

X“New”

■ To add information to the FOMA card

(UIM)

X“New” or “Overwrite”

Display the phonebook detail

screenXd (Select)

The phone number is automatically entered and the phonebook editing screen appears. Editing the phonebook→p. 90

After editing, press o (Finish)

■ If a message appears asking whether to

overwrite the existing data

X“YES”

z The “Notify Caller ID” setting (“Notify” or “Not

notify”) displayed in the “Dialed calls” and “Redial” records is not stored in the phonebook.

Renaming Groups

You can assign your stored phonebook entries to groups by contact role (“Work”, “Friends”, etc.) or by hobby (“Baseball”, “Football”, etc.). This allows you to use the phonebook as if it were divided into different volumes by purpose. z “No Group” cannot be renamed.

Phonebook list screen (p.87)X

u (FUNC)X“Group setting”

Group setting

Function menu¨p.87

Select a groupXEnter a new group

name

The “ ” displayed with a group indicates it is a group on the FOMA card (UIM). If the same name is used for a groups on the FOMA terminal (Phone) and the FOMA card (UIM), they are displayed as separate groups.

Group setting screen (p.86)

Edit group name

Ring tone/Image→ p.91

Reset group name……Reset the group name to default.

z Resetting the group name does not reset the

“Ring tone/Image” setting.

Searching for the phonebook entry of the person you want to call

iX“Phonebook”X“Phonebook”

■ To make a voice call

from the list screen

XHighlight a phonebook

entryXr If the phonebook entry contains multiple phone numbers, the call is made to the first phone number stored for that entry.

■ To switch the tab

display

Xu (FUNC)X“Change Display”

Select “Alphabet”, “Memory No.”, or “Group”.

Phonebook list

Function menu¨p.88

Phonebook

Making a Call from Phonebook

Make a call by calling the phonebook entry from the FOMA terminal (Phone) phonebook or the UIM phonebook.

z When tabs are displayed on the phonebook list

screen, you can switch displays as follows:

<Example: To switch tabs from the “他 ” (Others) to the “た ” (ta-column) in the Alphabet display>

Ta b

List of “他 ”

(Others)

z You can use v to switch pages within the same

tab.

z You cannot switch tabs with o ( ) when

storing Choku-Den or using the Look-up phonebook function when composing a message.

p () 4 times

o () 4 times

List of “た ” (ta-column)

Alphabet Memory No.

Group

Select a phonebook entry

Phonebook detail

Function menu¨p.89

Use v to display a phone

numberXr (voice call) or o (V.phone)

■ To send mail

XUse v to display a mail addressXd (MAIL)

“Composing and Sending i-mode Mail”→p.146

z Pressing f during a call displays the Search

group screen, and pressing g displays the Search column screen.

z Display the i-concier URL and press d on the

“Phonebook detail” screen to access the relevant URL website or Internet websites. “Web To function”→p.198

Searching for the phonebook entry by specifying the search method

Search for a phonebook entry using any of 8 search methods: reading, name, phone number, mail address, memory number, group, columns in Japanese phonetics (あ (a), か (ka), さ (sa), た (ta), な (na), etc.) or all entries.

z Search results are displayed in the order shown

below based on the reading entered when the entry was stored (except for memory number search). Katakana→Alphabets →Numbers→Symbols →

Phonebook

Reading is not stored

*: If a space is entered at the beginning, the entry is

searched first.

On the standby screenXg

■ To set your preferred

search method first

XHighlight a search method

you want to display firstXo (Prefer)X “OK” “★ ” appears next to the preferred search method. Pressing g on the standby screen displays the phonebook search screen for your preferred search method.

■ To release your preferred search method

setting

XOn the standby screen

search method with “★”

Select a search method

Search reading……XEnter the readingXc

Enter the reading from the beginning. You do not need to enter the entire reading.

Search name ……XEnter the nameXc

Enter the name from the beginning. You do not need to enter the entire name.

Search phone No.……XEnter the phone number

Enter the first or middle digits of the phone number. You can also search for the phone number by entering a part of the phone number and pressing c on the “Enter phone number” screen (p.48).

Search e-mail……XEnter the mail addressXc

You do not need to enter the entire address.

Search memory No.……XEnter the 3-digit

memory number

You cannot search the UIM phonebook by memory number.

Search group……XSelect a group

Groups are different between UIM phonebook and FOMA terminal (Phone) phonebook.

XgXtX

o (Reset)

Highlight a

Search column……XPress the key for the

column (tab) you want to search

1: “あ (a)” column 2: “か (ka)” column 3: “さ (sa)” column 4: “ た (ta)” column 5: “な (na)” column 6: “ は (ha)” column 7: “ま (ma)” column 8: “ や (ya)” column 9: “ら (ra)” column 0: “ わ (wa)” column w: Others (alphabet, number, etc.)

Search all……Display all the stored phonebook

entries in the “Alphabet” tab.

When the search ends, the “Phonebook list” screen containing entries that meet the search condition appears. “ ” appears for phonebook entries stored in a FOMA card (UIM). “ ” appears for phonebook entries, to which i-concier address, i-concier URL and i-concier memo are added.

●

Accessing the phonebook from the

Phonebook list

Function menu¨p.88

Redial or Dialed calls record

You can access the detail screen for stored phonebook entries from the function menu of “Received calls”, “Dialed calls”, “Redial”, “Received address” or “Sent address” screen by selecting “Look-up phonebook”.

Phonebook list screen (p.87)

z The available functions vary depending on the

search method and display method.

Add to phonebook→ p.84

Connect to Center……Store the phonebook data at the

Data Security Center.→ p.140

Sort*1……Sort the phonebook list in accordance with the

selected condition.

Change Display……Select Alphabet/Memory No./Group.

Ring tone/Image→ p.9 2

Restrictions→ p.13 6

Group setting→ p.86

Copy to microSD*2→p.342

• When “Copy all” is selected, select whether to copy the My Profile data in addition to the phonebook data.

• With “Copy all” and “Copy selected”, information stored in the PushTalk phonebook is also copied.

iC transmission*2→p. 355

iC trans. all*2→p. 356

Send Ir data*2→p.354

Send all Ir data*2→p.3 54

No. of phonebook→ p.91

Search location*2……Access the i-mode site and

execute imadoco kantan search using the phone number.

Attach to mail

the phonebook data attached.

Big font⇔ Standard font……Switch the font size

between Big font and Standard font. →p.113

microSD phonebook⇔ Original phonebook……Refer

to the phonebook in a microSD card or the FOMA terminal (Phone).

*2*3

……Display the new mail screen with

Birthday reminder*4……Display the “Birthday reminder”

screen. Select “BD reminder list” to display phonebook entries with birthday reminder set. Set “Reminder illum.” to “ON” to select the illumination color and pattern. On the day of the reminder, the incoming call lamp flashes in the pattern set here.

Delete data……Select Delete this/Delete selected/Delete

all.

• “Delete all” also deletes phonebook entries on a FOMA card (UIM).

*1 : Use on the result screen displayed when a condition

such as reading was entered and phonebook search

was performed. *2 : Does not function for the UIM phonebook. *3 : When 2in1 is in B mode, this function is not available. *4 : Not available if “Reminder” is not set.

Phonebook detail screen (p.87)

Edit phonebook→ p.9 0

Notify Caller ID→ p.58

Chaku-moji→ p.5 6

Dial setting

Prefix numbers →p.59

Int’l call→ p.53

2in1/Multi Num.……Select Number A/Number B/

Cancel number when 2in1 is set to ON in Dual mode (p.422) (not available when A mode or B mode is set). When the 2in1 setting is set OFF, select Basic Number/Additional Number 1/Additional Number 2/ Cancel number (p.419).

Select image……Select Me/Chara-den as an image

used during a videophone call. Select “Release settings” to release the setting.

Ring tone/Image*1→p. 91

Restrictions*1→p. 136

Move to top*1……Move the displayed phone number or

mail address to the top when multiple phone numbers or mail addresses are stored in one phonebook entry.

Add to PushTalk

*1*2

→p. 77

Add to Choku-Den*1→p. 92

Add desktop icon→ p.114

Compose message*2→p. 146

Attach to mail

the phonebook data attached.

*1*2

……Display the new mail screen with

Compose SMS*2→p. 182

iC transmission*1→p. 355

iC trans. all*1→p. 356

Send Ir data*1→p.354

Send all Ir data*1→p.3 54

Copy to microSD*1→p. 342

Copy

Name……Paste the copied name into input screens,

etc. →p. 403

Phone number*3……Paste the copied phone

number into input screens, etc. →p.403

Secret code*1→p. 90

Set code……Set the secret code (4 digits).

Check code……Check the set secret code.

Release settings……Release the set secret code.

*1*4

Set secret

→p. 125

Copy to UIM*5→p. 350

Search location……Access the i-mode site and execute

imadoco kantan search using the phone number.

Map/GPS αppli*1……Display a list of i-αppli that support

the Map/GPS function.

Read Map*1……Activate GPS i-αppli selected in “Select

Map” (p.300)

Paste to mail

location information URL stored in the phonebook pasted into the screen.

Attach to image*1……Add the location information to a

still image.

Big font⇔ Standard font……Switch the font size

between Big font and Standard font. →p.113

*1*2

……Display a new mail screen with the

Delete data→ p.90

*1 : Does not function for the UIM phonebook. *2 : When 2in1 is in B mode, this function is not available. *3 : Depending on the selected item, “Mail address”,

“Address”, “Positioning info”, “Birthday”, “Memorandums”, “i-concier address”, “i-concier URL” or “i-concier memo” appears.

Continued on next page

Phonebook

*4 : “Release secret” when referring to a secret data

phonebook entry.

*5 : “Copy to phone” when referring to the UIM

phonebook.

z When information is stored in the PushTalk

phonebook, “ ” appears in the phonebook detail screen, and “★” appears also in the function menu.

Phonebook

z When information is stored to Choku-Den, “ ★”

appears in the function menu.

●

Secret code

When the mail address of the other party is “phone number@docomo.ne.jp” and he/she sets a secret code, you have to specify “phone number + secret code@docomo.ne.jp” as the mail address. There are 2 methods to send mail to such a recipient.

z Set a secret code for the phonebook entry from the

phonebook detail screen function menu (when referring to the mail address, the secret code is automatically added to the mail address in the phonebook).

z Store the mail address with a secret code in the

phonebook.

z Secret code settings are valid only for mail

addresses in “phone number@docomo.ne.jp” or “phone number” format.

Editing Phonebook Entries

Phonebook detail screen (p.87)

Xu (FUNC)X“Edit phonebook”

XEdit the respective items

Edit the required items using the same procedure as “Add to phonebook”. Adding information to the phonebook→p. 84

■ To store in a new memory number

XSelect “ ”XEnter a memory number (000 to

999) that has not yet been stored The original phonebook entry is left in its preedited state and the edited entry is stored as a new phonebook entry with a different memory number.

After editing, press o (Finish)

X “YES”

■ To add information to the FOMA card

(UIM)

Xo (Finish)X“Overwrite” or “Add”

Selecting “Overwrite” stores the edited information. Selecting “Add” leaves the original phonebook entry unchanged and stores the edited entry as a new phonebook entry.

z You cannot edit the i-concier address, i-concier

URL and i-concier memo.

z When the edited entry is stored to the PushTalk

phonebook or Choku-Den, the PushTalk phonebook or Choku-Den is also changed automatically.

z If the memory number of the entry is edited, and

the entry before editing is a PushTalk entry with a member list stored or group list stored, or is stored to Choku-Den, that information is not inherited to the changed entry.

Deleting Phonebook Entries

Phonebook detail screen (p.87)

Xu (FUNC)X“Delete data”X

Select any item:

Delete phone No.*……Delete the selected phone

number.

Delete this

*: Depending on the selected item, “Delete mail

add.”, “Delete phone No.”, “Delete loc. info”, “Delete birthday”, “Delete memorandums”, “Delete image” or “Delete Chara-den” appears. Not available when the “i-concier address”, “i-concier URL” or “i-concier memo” is selected.

z If you delete a phone number or mail address in a

phonebook entry in which multiple phone numbers or mail addresses are stored, the subsequent phone numbers or mail addresses move up.

Checking Phonebook Storage Status

Phonebook list screen (p.87)X

u (FUNC)X“No. of phonebook”

■ Phone (phonebook stored on the FOMA

terminal)

Phonebook: Display the number of entries

Secret: Display the number of entries

Image: Display the number of images

Chara-den: Display the number of Chara-

Birthday remind: Display the number of entries

■ UIM (phonebook stored in a FOMA card

(UIM))

Phonebook: Display the number of entries

<No. of phonebook>

stored in the phonebook. Number of items stored/1,000 (maximum)

stored as secret data (Displayed only in Secret or Secret data only mode).

stored in the phonebook. Number of items stored/100 (maximum)

den characters stored in the phonebook. Number of items stored/100 (maximum)

with birthday reminder set. Number of items stored/100 (maximum)

stored in the phonebook. Number of items stored/50 (maximum)

Setting Different FOMA Terminal Actions for Each Phone Number and Mail Address

Set the ring tone or answering message of Record message individually for each phone number or mail address in the phonebook, or each group. This function is useful when you want to distinguish the caller by ring tone.

z You cannot set this setting for “No Group” on the

FOMA terminal (Phone), or the UIM phonebook or groups.

z Ring tone/Image is disabled when the caller does

not show the caller ID. It is recommended that you set the “Caller ID Request” service.

Phonebook detail screen (p.87)

Xu (FUNC)X“Ring tone/Image”

“★ ” appears next to a set function. The available functions vary depending on the item selected in the phonebook detail screen.

■ To set this function for each group

XGroup setting screen (p.86)X

u(FUNC)X“Ring tone/Image”

Select an item to distinguish by

ring tone

Select “Voice call (recv.)”, “V.phone (recv.)”, “SMS (recv.)” or “Mail (recv.)”.

Select any item:

Ring tone*1……Set ring tones to distinguish the

caller or sender. “Changing the Ring Tone”→ p.96

*1*2

Image

……Set images to distinguish the caller.

“Changing the Display” →p. 104

Chara-den setup*3……Select Chara-den to be

displayed as a substitute image for videophone calls.

Illumination*1……Set the color of incoming call

lamp to distinguish the caller or sender.

Vibrator*1……Set vibration patterns to distinguish

the caller or sender. “Setting the Vibration to Notify You of Incoming Calls”→p.9 8

Answer message*2……Change the answer

message used when record message*4 or quick message starts depending on the caller. “Having the Caller Leave a Message for an Incoming Call”→ p.67

*1 : You can also distinguish incoming 64K data

communications.

*2 : Available only when “Voice call (recv.)” or

“V.phone (recv.)” is selected. *3 : Available only when “V.phone (recv.)” is selected. *4 : You need to set “Record message” to “ON”

beforehand.

“★ ” appears next to set functions.

■ To release a set function

XHighlight the function with “★”Xo (Reset)

The function is released and “★” disappears.

Phonebook

Continued on next page

■When you set Ring tone/Image

An icon appears in the phonebook detail screen indicating that each item is set.

: Ring tone (voice,

videophone call) : Ring tone (mail) : Illumination (voice,

videophone call) : Illumination (mail)

Phonebook

: Vibration (voice,

videophone call) : Vibration (mail) : Image (voice, videophone call) : Answer message (voice, videophone call) : Chara-den (videophone call)

z You cannot set this setting for a phonebook entry

stored as secret data. Even if the setting is made for a group, it is disabled for a phonebook entry stored as secret data.

z The “SMS (recv.)” setting set for a phone number

is activated when you receive SMS or the sender’s mail address is “phone number@docomo.ne.jp”.

z Refer to the following pages for the priority when

the Ring tone/Image settings and other settings for incoming calls, etc. are duplicated.

• Ring tone priority → p.97

• Vibrator priority →p.98

• Image priority → p.97

• Illumination priority → p.110

• Chara-den priority →p.85

Checking the Ring tone/Image settings

Check the phonebook entries or groups set in “Ring tone/Image” by function or item.

Phonebook list screen (p.87)X

u (FUNC)X“Ring tone/Image”

“★ ” appears next to items with this function set.

Select a function or item with “★ ”

XHighlight a function or item with

“★”Xu (FUNC)XSelect any item:

Check settings……Check the setting status. XHighlight a function or item with “★ ”*XCheck

the set entry or group

Release settings……Release all the settings of the

functions marked with “★ ”.

*: The number of selected items (number of times

d is pressed) varies depending on the function or setting specified.

Using Choku-Den

By storing frequently used phonebook entries to Choku-Den, you can make a call or send mail quickly. z You can store entries to Choku-Den by quoting the

data (phone numbers and mail addresses) stored in the FOMA terminal (Phone) phonebook. If no data is stored in the phonebook, add the entry in the FOMA terminal (Phone) phonebook from the “Choke-Den” screen and then store it to Choke-Den.

z Up to 5 entries can be stored. z You can send i-mode mail or chat mail to up to 5

mail addresses stored in Choke-den at the same time.

z You cannot use this function in Secret data only

mode.

z You can use this function in Secret mode, but you

cannot store a phonebook entry, which is stored as secret data, to Choke-Den. Also, you cannot store the entry to Choke-Den after adding the data in the phonebook in this mode.

<Choku-Den>

Adding to Choku-Den

On the standby screenXr

When there is data stored, the Choku-Den screen of the first tab with data stored appears.

■ To change the target

XUse v to move the tab

You can also use 1 to 5 to move to the tab of

the respective number.

o (Store)

■ To change stored information

Xo (Edit)

Choku-Den

Function menu¨p.93

“View phonebook”XSearch for a

phonebook entry

Searching the phonebook→p. 88

■ To store data after adding it to the

phonebook

X“Direct input”

Go on to Step 4 when you finish adding entries to the phonebook (p.84).

d (Select)

Use c to select a checkbox (□ )

Select only one phone number and mail address to add respectively. When a checkbox is selected, other phone numbers or mail addresses are displayed in gray and the checkbox cannot be selected. To select a checkbox, clear the checkboxes first.

o (Finish)

z The “Phonebook 2in1 setting” setting is displayed

on the “Choku-Den” screen when 2in1 mode is in Dual mode.

z When an image is stored in the phonebook entry,

the image in the entry is added to Choku-Den.

Making calls/Composing mail from Choku-Den

<Example: To make a call>

Choku-Den screen (p.92)XUse v

to display the Choku-Den screen to make a call

You can also use 1 to 5 to move to the tab of

the respective number.

Choku-Den screen (p.92)

Store, Edit……Store information in a Choku-Den with no

information stored, or edit a Choku-Den with information already stored. →p.92

Image……Select an image from “My picture” to change

the image displayed in Choku-Den.

Broadcast mail……Display the new mail screen with all

mail addresses stored to Choku-Den set as the address. →p. 146

Broadcast chat……Display the chat screen with all mail

addresses stored to Choku-Den set as the chat members. →p. 178

Release this, Release all

<Image>

z You can add an image whose file size is 100K

bytes or smaller and whose width or height is 854 dots or smaller. However, you cannot add images other than JPEG or GIF.

Using Dialing Shortcuts

<Two-touch dialing>

By assigning the memory numbers “000” to “009” to phone numbers in the phonebook, you can call those phone numbers by simply pressing one of 0 to

9 (last digit of the memory number) and r.

0 to 9Xr (voice call),

o (V.phone) and @ (PushTalk)

Only one-to-one communication is available for PushTalk.

z If the phonebook entry contains multiple phone

numbers, the call is made to the first phone number stored in the entry.

Phonebook

Use c to select “CALL”

■ To compose mail

XUse c to select “MAIL”→p.146

■ To make a videophone call

XUse c to select “VIDEO PHONE”

Sound/Screen/Light

Settings

■Sound settings

Changing the Ring Tone .......................................................................... 96

Setting Sound Effect for Ring Tones and Melodies................................ 98

Setting the Vibration to Notify You of Incoming Calls.......................................... 98

Changing the Ringback Tone............................................................... 99

Setting the Keypad Sound......................................................................... 99

Setting the Notification Tone and Illumination for GPS Function .................................... 99

Setting the Open-Close Sound............................................................ 100

Setting the Confirmation Tone for Charging................................................ 100

Setting the Clock Alarm Tone ........................................................... 100

Alarming You before the Line is Disconnected ............................................ 100

Setting the Ring Time for Incoming Mail .............................................. 100

Hearing the Ring Tone from the Earphone and Speaker................ 101

Turning Off the Phone Sounds.................................................................... 101

Changing Manner Mode Settings .......................................................... 104

Select ring tone

Stereo&3D sound

Vibrator

Melody Call setting

Keypad sound

Open-Close sound

Charge sound

Clock Alarm Tone set

Quality alarm

Mail/Msg. ring time

Headset usage setting

Manner mode

Manner mode set

■Screen/Light settings

Changing the Display................................................................................. 104

Displaying Phonebook Images When You Receive Calls .............. 106

Setting the Color for Caller ID Display .............................................. 106

Preventing Others from Peeping the Screen .............................................. 106

Setting the Display and Keypad Lighting .......................................................... 107

Changing the Display Design..................................................................... 107

Changing the Menu Display............................................................................................ 108

Setting the Display Mode of the Indicator Display ................................... 109

Setting the Flashing Mode of the Incoming Call Lamp for Incoming Calls..... 110

Setting the Flashing Mode of the Incoming Call Lamp during Calls ..... 110

Setting Illumination Flash for Handset Closing .................................... 111

Setting Key Illumination Flash.................................................................. 111

Setting the Key Backlight Color ................................................................... 112

Setting the Image Display Mode ........................................................ 112

Setting Machi-Chara as Standby Screen............................................ 112

Changing the Font ................................................................................................... 113

Setting the Clock Display ............................................................................. 113

Using Desktop Icons/Desktop Info............................................................... 114

Displaying Desktop Icon Messages for New Mail in 3D Animation........ 117

Selecting Icons to Display on the Standby Screen ....................................... 118

Setting the Kisekae Tool .................................................................... 119

Display setting

Disp. phonebook image

Disp. call/receive No.Disp. call/receive No.

Privacy angle

Backlight

Display design

Indicator display

Illumination

Illumination in talk

Closed illumination

Key illumination

Key backlight

Image display mode

Machi-chara setting

Font

Clock display

Desktop icon

3D display setting

Icons setting

Kisekae Tool setting

Changing the Ring Tone

Set the ring tone and receiving screen for voice call, videophone, PushTalk or i-mode mail. You can also set the ring tone for specified phone number, mail address or group in the phonebook respectively. →p. 91

z “Guide to the melody list”→p.333 z Setting the dialing/sending screen→p.104

iX“Settings/Service”X

“Incoming call”X“Select ring

Sound/Screen/Light Settings

tone”XSelect an item to set a ring tone

Select “Phone”, “Videophone”, “PushTalk”, “Mail”, “Chat mail”, “MessageR”, “MessageF” or “i-concier”.

• When “Phone” is selected, the ring tone for voice calls and 64K data communication is set.

• When “Mail” is selected, the ring tone for i-mode mail, SMS and packet communication is set.

“Select ring tone”XSelect any

item:

Melody……Set the ring tone or melody.

i-motion……Set i-motion/Chaku-Uta® downloaded

to the FOMA terminal or movie (i-motion) captured with the camera. When you receive a call, the video or sound for the selected i-motion is played (Chakumotion).

Music……Set Chaku-Uta-Full®. Set any item from

the following when the Chaku-Uta-Full® contains the portion where the ring tone is specified by the provider:

Fullsong ring tone……Set the entire song as

the ring tone.

Point ring tone……Set a part of the song as

the ring tone.

XUse v to specify the portion (displayed

in orange) to set as the ring toneXd (Set)

When the “Movable contents” folder is selected, select “YES” then the destination folder.

Voice announce……Set the message recorded

using “Voice announce”.

Random melody……Select a folder containing

melodies. When you receive a call or mail, melodies stored in the folder are played randomly.

OFF……Do not play a ring tone.

■ To set the calling/receiving display

X“Select calling disp.” or “Select receiving disp.”

On “Select calling disp.”, select an image from My picture or i-motion. On “Select receiving disp.”, select an image from My picture.

Select a ring tone

When you select a melody, the melody plays. Press r, q, o, p or u to stop melody playback.

■Pre-installed ring tones, melodies and alarms

Display 3D sound compatible

Pattern 1 to 4

Melody 1

Melody 2

Melody 3

Melody 4

Melody 5

Melody 6

Melody 7

Alarm 1

Alarm 2

Alarm 3

Alarm 4

Alarm 5

Alarm 6

Alarm 7

Alarm 8

Alarm 9

Alarm 10

Alarm 11

Open-Close 1 to 3

■Pre-installed Chaku-motion

a la carte

× × × × × ○ ○ × × × × × × × × × × × × ×

z Some i-motion (i-motion with video only) and

Chaku-Uta-Full

z Only i-motion with sound only (i-motion with no

video such as a singer’s voice) can be set as a ring tone for PushTalk or i-concier.

z i-motion with sound only (i-motion with no video,

such as a singer’s voice) cannot be set as the receiving display.

z Flash movies can be set as the receiving display/

mail receiving display, but the ring tone used is a tone set in “Select ring tone”.

cannot be set as a ring tone.

z A movie/i-motion cannot be set as Chaku-motion

or image displayed for incoming calls in the following cases:

• When the movie/i-motion is transferred to a PC or another FOMA terminal via infrared data exchange, iC communication or DOCOMO keitai datalink (p.437), then returned to the FOMA terminal

• When the movie/i-motion is copied from a microSD card to the FOMA terminal (including the case that the movie/i-motion is copied from the FOMA terminal to a microSD card, then copied to the FOMA terminal again)

z When you select i-motion in the Movable contents

folder, the selected i-motion is moved to the Inbox folder under “i-motion”.

z When you select Chaku-Uta-Full

contents folder and “Fullsong ring tone” is set, the selected Chaku-Uta-Full folder under “Music”. When “Point ring tone” is set, the selected portion is clipped as i-motion and saved to the “i-motion” folder.

z When you set Chaku-Uta-Full

FOMA terminal as a ring tone with “Point ring tone”, it is not clipped as i-motion and the selected portion is set as a ring tone.

z While selecting a ring tone, the ring tone is played

at the volume set in “Ring volume”.

z When i-motion with video and sound is set as a

ring tone and receiving display, i-motion set as the ring tone is played.

z If you set other than i-motion with video and sound

as the ring tone and then set i-motion with video and sound as the receiving display, i-motion set as the receiving display is played.

z When i-motion is set as a mail ring tone, the

default “Mail” ring tone is used as a packet communication ring tone. The dedicated screen appears when packet communication is received regardless of the receiving display settings.

z When Chaku-Uta-Full

image is set as a ring tone, the Chaku-Uta-Full jacket image does not appear when you receive a call.

in the Movable

is moved to the Inbox

stored in the

that contains a jacket

z The following table shows the ring tone operations

performed when multiple mail or MessageR/F are received simultaneously:

Received content Ring tone operation

Multiple mail are received

Mail and MessageR/F are received simultaneously

MessageR/F are received simultaneously

z When the ring tone settings for incoming calls are

duplicated, the priority is assigned as follows:

①Ring tone for Ring tone/Image (individual) ②Ring tone for Ring tone/Image (group) ③Ring tone for B mode of 2in1/Multi number

(Additional number 1, 2)

④Ring tone for Select ring tone/Kisekae Tool

setting

* The priority is assigned as follows for ① “Ring

tone/Image” (individual) and ② “Ring tone/ Image” (group):

①i-motion for Ring tone ②i-motion for Calling display ③i-motion for Ring tone (i-motion with no video,

such as a singer’s voice), melody or Chaku-

Uta-Full

z When the ring tone settings for mail are

duplicated, the priority is assigned as follows:

①Ring tone for Ring tone/Image (individual) ②Ring tone for Ring tone/Image (group) ③Ring tone for B mode of 2in1 ④Ring tone for Select ring tone/Kisekae Tool

setting

z When the image settings for incoming calls are

duplicated, the priority is assigned as follows:

①Calling display for Ring tone/Image (individual) ②Calling display for Ring tone/Image (group) ③Still image stored in the phonebook

’s

④Calling display for B mode of 2in1 ⑤i-motion set in Select ring tone ⑥Display setting/Kisekae Tool setting

* The priority is assigned as follows for ① “Ring

tone/Image” (individual) and ② “Ring tone/ Image” (group):

①i-motion for Ring tone ②i-motion or still image/image set in Select

calling disp.

Play the ring tone set for the last received mail. Play the ring tone set for chat mail if chat mail is contained.

Play the ring tone set for MessageR.

Sound/Screen/Light Settings

Setting Sound Effect for Ring Tones and Melodies

<Stereo&3D sound>

Get rich and exciting sounds of melodies, ring tones for voice/videophone/PushTalk call or mail, sound effects and i-motion sound when a stereo earphone set (optional) is connected.

iX“Settings/Service”X

“Incoming call”X“Stereo&3D sound”X“ON”

Sound/Screen/Light Settings

■ Not to set Stereo&3D sound

X“OFF”

●

What is 3D sound?

The 3D sound function uses the stereo earphones set to produce 3-dimensional and resonating sound. This function allows you to enjoy i-αppli games and melody playback with richer and more realistic sound.

• The 3D effect may vary depending on the individual. If the 3D sound bothers you, set “Stereo&3D sound” to “OFF”.

●

When playing i-motion with sound effects

When you play i-motion with sound effects, the effects simultaneously enhance the sound played through the speaker and earphone. Stereo sound played through earphones is enhanced by effects that provide a natural-sounding 3D sound field and rich low tones as well as clearly defined voice and music audio.

z i-motion with sound effects can be identified by icon

shown on the movie list screen.→ p.3 17

z Even when set to “ON”, sound effects do not work

for sounds coming from the built-in speaker.

z When “Headset usage setting” is set to

“Headset+speaker” and ring tones/melody alarm sounds are played with a stereo earphone set connected, the “Stereo&3D sound” setting is disabled. When set to “Headset only”, the “Stereo&3D sound” setting is enabled.

Setting the Vibration to Notify You of Incoming Calls

Set vibration patterns to notify you when you receive a voice call, videophone call, PushTalk call or mail.

iX“Settings/Service”X

“Incoming call”X“Vibrator”X Select an item to set vibrator

Select “Phone” to set vibrator for voice calls and 64K data communication. When “Mail” is selected, the vibrator for i-mode mail, SMS and packet communication is set.

Select the vibration pattern:

Patter n 1 to 3……Vibrate in each pattern. When

you move the highlight while selecting an item, the FOMA terminal vibrates in the highlighted pattern.

Melody linkage……Vibrate in a pattern linked to

melody set as a ring tone.

OFF……Do not vibrate.

■Icons on the standby screen while setting the

vibration pattern

: Vibrate when receiving a voice call, videophone

call or PushTalk

: Vibrate when receiving mail, chat mail or

MessageR/F

: Both “ ” and “ ” are set

z Take care not to bring the FOMA terminal close to

fire (e.g. space heater) or drop it off a table due to vibration.

z Even when “Melody linkage” is selected, the

FOMA terminal does not always vibrate to the melody. When no vibration pattern is set for the melody or when i-motion or Chaku-Uta-Full as a ring tone, the FOMA terminal vibrates in Pattern 2.

z When receiving Area Mail, Vibrator links to the

ring tone or beep regardless of this setting. Vibrator does not work when Area Mail arrives but “Mail” vibration pattern is set to “OFF”.

z When the vibrator settings are duplicated, the

priority is assigned as follows:

①Vibrator for Ring tone/Image (individual) ②Vibrator for Ring tone/Image (group) ③Vibrator for B mode of 2in1 ④Vibrator setting

is set

Docomo STYLE N-02A, PRIME series N-01A Instruction Manual

Specifications and Main Features

Frequently Asked Questions

User Manual

Notes on use

How to Use This Manual

Easy Search

Contents

Main Features of N-02A

Precautions

Notes on Handling

Package Contents

Before Using the Handset

Part Names and Functions

Viewing Display

How to View the Indicator Display (Rear Panel Display)

Function Display and Key Operations

i-Widget Display and Operations

Selecting Menu

Basic Operations on the Screens

Description of the Operations

Function Menu

Using the FOMA Card (UIM)

Attaching/Removing Battery Pack

Charging

Checking Battery Level

Turning the Power On/Off

Switching between Japanese and English

Configuring Initial Settings

Setting Clock

Notifying the Other Party of Your Phone Number

Checking Your Own Phone Number

Voice/Videophone Calls/PushTalk

Making a Voice/Videophone Call

Switching a Voice/Videophone Call during a Call

Making an International Call

Using Handsfree during a Call

Using the Redial/Dialed Calls/ Received Calls History

Using Chaku-moji

Showing/Hiding Caller ID When Making a Call

Sending Push Signals Quickly

Using the Prefix Function

Setting Sub-Address When Making a Call

Setting the Alarm for Reconnection

Blocking Out Ambient Noise

Making a Handsfree Call While Driving

Making the Earpiece Sounds Clear

Receiving a Voice/ Videophone Call

When the Other Party Switches a Voice/Videophone Call

Using the Dial Keys to Answer a Call

Folding the FOMA Terminal to End/Hold Calls

Adjusting the Earpiece Volume

Adjusting the Ring Volume

Holding Incoming/Current Calls

Using the Public Mode

When You Cannot Answer an Incoming Call

Having the Caller Leave a Message

Having the Caller Leave a Message for an Incoming Call

Playing/Erasing Recorded Messages, Voice Memos or VP Memos

Using Chara-den

Setting Videophone Functions

Using Videophone Connected to External Devices

Remote Monitoring

PushTalk

Making a PushTalk Call

Adding Members during a PushTalk Call

Receiving a PushTalk Call

Adding an Entry to the PushTalk Phonebook

Making a Call Using the PushTalk Phonebook

Deleting an Entry from the PushTalk Phonebook

Setting PushTalk

Phonebook

Phonebooks Available for the FOMA Terminal

Adding Entries to the FOMA Terminal Phonebook

Adding Phonebook Entries from Redial/Dialed Calls etc.

Renaming Groups

Making a Call from Phonebook

Editing Phonebook Entries

Deleting Phonebook Entries

Checking Phonebook Storage Status