Docomo P-01B, PRIME SERIES Instruction Manual

Download

Page 1

P-01B

INSTRUCTION MANUAL

’09.11

Page 2

DOCOMO W-CDMA・GSM/GPRS System

Thank you for selecting the “docomo PRIME series P-01B”.

Read this manual before use to correctly operate your P-01B.

About operation explanation of P-01B

The operating procedures for the P-01B are also published in electronic form as in “



installed onto your FOMA terminal, and “Instruction Manual (Detailed Version)” as a PDF. (In Japanese only)

“Instruction Manual” (this volume)



Description of displayed content and operating procedures for basic functions

“





(Guide)” (installed onto your FOMA terminal)

Description of the outline of frequently used functions and of operations

▶

From the P-01B

This function is available in Japanese mode only.

※

“Instruction Manual (Detailed Version)” (PDF)



LifeKit

Use your personal computer to visit the following, and download detailed information about all the functions and their operating procedures. (In Japanese only) http://www.nttdocomo.co.jp/support/trouble/manual/ download/index.html

Note that the URL and published contents may be modiﬁed

※

without notice.

(Guide)” that is



▶





(Guide)



Basic Package

P-01B Handset

⿠

(With Warranty and Back Cover P39)

See page 87 for optional items that support this FOMA

⿠

terminal.

For Using This Manual

Note that “P-01B” is referred to as “FOMA terminal” in this manual.

⿠

Most operating procedures and displays in this manual are described

⿠

with the default settings of the “Black” handset. Further, displays and illustrations described in this manual are for reference. The actual ones might differ. Most operating procedures and displays in this manual are described

⿠

when the FOMA terminal is in Normal Style.

Battery Pack P20

⿠

NTTドコモ

Instruction Manual

⿠

P-01B CD-ROM

⿠

Page 3

FOMA Terminal What You can Do With P-01B Part Names and Functions

····································2

··············3

·················· 4

···················································6

Styles Precautions Handling Precautions

··········································7

························15

Introduction

󱽄

P.1



Before Using ·····························18

Charging, Power ON/OFF, etc.

Screen Explanation ··················22

Viewing Display, etc.

Call Telephone···························40

Making a Call/Videophone Call, Receiving a Call/Videophone Call, Network Services, WORLD WING, etc.

i-mode/Full Browser ················· 54

Access Sites, Full Browser, Viewing and Operating Sites

Camera ······································60

Shoot Still Images/Moving Pictures, etc.

1Seg ··········································· 62

Watch 1Seg, etc.

Osaifu-Keitai ·····························69

Osaifu-Keitai/ToruCa

i-concier ·····································70

Support ······································80

Troubleshooting, Warranty and After-Sales Service, i-mode Fault Diagnosis Site, Updating Software, etc.

It is prohibited to copy all or part of this manual without permission. ※The instructions contained in this manual may be changed without notice.

※

Character Entry·························29

Sound/Screen Setting

Select Ring Tone, Display Setting, etc.

··············31

Mail ·············································48

Send i-mode Mail, Deco-mail, Decome-Anime, Receive i-mode Mail, etc.

Lock/Security ···························· 36

Security Codes, Various Lock Functions, Reset to Default, etc.

Phonebook ································ 52

Store Phonebook, Edit Phonebook, Delete Phonebook

i-Channel ···································57 Map/GPS ····································58

Check Your Location, Map Application, AUTO-GPS Function, etc.

Music ·········································65

Music&Video Channel, Music Player, etc.

Convenient Tools

Schedule, Alarm, Bar Code Reader, Pedometer

······················71

Appendix ···································88

Function List, Main Speciﬁcations, SAR, Export Administration Regulations, Intellectual Property Right

i-αppli ·········································67

i-αppli/i-Widget

i-motion/Movie ··························68

Play i-motion/Movie

Data Management ·····················74

microSD Card, Bluetooth, Infrared Communication, iC Communication

Index ········································101

Basic Operation

󱽄

P.18



Connect

󱽄

P.40



󱽄

P.54



Enjoy

󱽄

P.60



More Convenient

󱽄

P.69



Others

󱽄

P.80



Page 4

Introduction

FOMA Terminal

⿠Because the FOMA terminal uses a radio wave, you cannot use it in places where the radio wave do not reach, where it is weak even outdoors, or where are out-of-service area, such as inside tunnels, basements, or buildings. You might not able to operate the FOMA terminal even when you are in a place with a ﬁ ne view such as in a high-rise building or apartment. Note that you may experience interruption of calls even if the three antennas respond to a strong radio wave, and you remain without moving to use the FOMA terminal. ⿠Use the FOMA terminal carefully to avoid disturbing other people when in public, or in crowded or quiet places. ⿠Since the FOMA terminal uses radio waves as the medium of telecommunication, calls may be tapped by a third party. However, the W-CDMA·GSM/GPRS system automatically supports tapping prevention, so your conversation will be incomprehensible to the third party, because it is recognized as mere noise. ⿠The FOMA terminals change your voice into digital signals and send them to the other party. In places where the radio waves are weak, the digital signals may not be converted correctly, and in such a case, the voice may sound different from the actual original one. ⿠The user hereby agrees that the user shall be solely responsible for the result of the use of SSL/TLS. Neither DOCOMO nor the certiﬁ ers as listed herein make any representation and warranty as for the security in the use of SSL/TLS. In the event that the user shall sustain damage or loss due to the use of SSL/TLS, neither DOCOMO nor the certiﬁ ers shall be responsible for any such damage or loss. Certiﬁ ers: VeriSign Japan K.K., Cybertrust Japan Co., Ltd., GlobalSign K.K., RSA Security Japan Ltd., SECOM Trust Systems Co., Ltd., Comodo CA Ltd, and Entrust, Inc. ⿠This FOMA terminal supports FOMA Plus-Area and FOMA High-Speed Area. ⿠The FOMA terminal can be used only via the FOMA network provided by DOCOMO and in DOCOMO’s roaming area. ⿠You are advised that you make separate notes of information (such as Phonebook entries, schedule events, text memos, record messages, voice memos, movie memos) stored in the FOMA terminal and keep them in a safe place. Note that we cannot be held responsible for the unlikely event of loss of the stored content due to a malfunction, repair, change of your model, or other mishandling of the FOMA terminal. ⿠You are advised to save your important data on the microSD card. If you have a personal computer, you can transfer and save data such as Phonebook entries, mail messages, schedule events, and others on the personal computer by using DOCOMO keitai datalink.

Page 5

What You can Do With P-01B



You can check “ onscreen for how to operate a function you want. Even when you do not have the printed “Instruction Manual” at hand, you can easily operate your FOMA terminal by referring to it.

▶

LifeKit

This function is available in Japanese mode only.

※

(Guide)

使いかたナビ

▶

使いかたナビ

AUTO-GPS

The AUTO-GPS function enables you to get information about weather forecast, shops, and tour spots, where you are currently around.

(Guide)”

(Guide)

󱽄

P.59

Pedometer

Pedometer enables you to conﬁ rm your pace and calories burned. You can also show your pace on the Standby display.

International Roaming

󱽄

P.73

󱽄

P.47



You can use the FOMA terminal overseas the same way as you use it in Japan, including phone number and mail address. (3G/ GSM areas are supported.)

Railway

○○

Suspension of the service now...

󱽄

i-concier

P.70

i-concier is a service that enables you to receive useful information from a character (Machi-chara image) on the Stand-by display and download schedule event (i-schedule) ﬁ les for your convenience.

Introduction

Camera

󱽄

P.60

Shot mode is automatically selected to have a subject shot clearly. (intelligent Auto)

Touchpad

󱽄

P.28

You can smoothly operate just by the sense of touch of your ﬁ ngers.

Page 6

Part Names and Functions

󰿿 󱀀

󱀁

Introduction

󱀂 󱀃

󱀄 󱀅

󱀆 󱀇

󱢳

󱢴

󱢵 󱢶

󱢷

󱢸

󱢹 󱢺 󱢻

Light sensor

󰿿

For sensing brightness (Do not cover it with your hands or do not put a sticker on it. Doing so might disable you to detect the brightness.)

Earpiece

󱀀

For listening to the other party’s voice

Display

󱀁

Mail key

󱀂+l

For showing the Mail menu

Clear key/i-Widget key

󱀃+r

Menu key

󱀄+m

For showing the Main menu

Start key

󱀅+d

For starting a call

For using earphone

Connect an optional connector-terminal-compatible earphone. When using a connector-terminal-non-compatible earphone, use an optional plug adapter for connection.

Example for connecting the Flat-plug Earphone/Microphone with Switch (option)

Touchpad switch key

󱀆+t

For turning on/off the Touchpad

Microphone

󱀇

For speaking to the other party

Inside camera

󱢳

For shooting photos of yourself

Command navigation key

󱢴+o

For operating functions and menus

i-mode key/i-αppli key

󱢵+i

Camera key/1Seg key

󱢶+c

Flat plug connector of the Flat-plug Earphone/Microphone with Switch

Earphone terminal (Flat-plug)

Plug for the handset side

Power/End key

󱢷+h

For turning on/off the power or ending a call

Numeric keys/ Touchpad

󱢸

For entering phone numbers and text, selecting an item, or moving the cursor by touchpad

Multi key

󱢹+x

For showing the Task menu

Hook for Horizontal Open

󱢺

Style

Connector terminal

󱢻

Integrated terminal for connecting earphone or for charging, etc.

Page 7

󱢼

󱢽

󱢾 󱢿 󱣀

󱣁

Call/Charging indicator

󱢼

Lights/ﬂ ickers while you are receiving a call or message, talking, or charging.

Private window

󱢽

Outside camera

󱢾

For shooting portraits and/or landscapes

Infrared data port

󱢿

For using infrared communication and the infrared remote control

fmark

󱣀

Place this mark over a scanning device when you use Osaifu-Keitai.

Back cover

󱣁

Remove this when attaching/removing

󱣂

the battery pack, UIM, and microSD card.

󱣃

FOMA antenna

󱣂

󱣄

The FOMA antenna is embedded in the

󱣅

handset. Do not cover the antenna with your hand for better communication.

Strap hole

󱣃

󱣆

Flash/ Photo light

󱣄

Speaker

󱣅

Charging terminal

󱣆

󱣌

1Seg antenna

󱣇

For receiving 1Seg broadcasting

󱣇 󱣈

󱣉

󱣊 󱣋

Engage your ﬁ ngertip over the top of the 1Seg antenna, and pull it until it stops.

⿠To house the 1Seg antenna, do not do it forcibly. Damage to the antenna could result. Push the antenna until it stops, place it in correct direction, and then bring it down for housing.

Side  key

󱣈.<

For turning up the earpiece volume during a call

Side  key

󱣉.>

For turning down the earpiece volume during a call

TV/Recording key

󱣊.g

Shutter key

󱣋.v

For shooting a subject by the camera

One-push open button

󱣌

For opening the FOMA terminal (Be careful not to drop the FOMA terminal by the rebound when opened.)

Change the direction the antenna inclines in without putting forcible pressure on.

Introduction

Page 8

Styles

The P-01B comes with two styles.

 Normal Style

You can open the FOMA terminal easily by one-push key operation. ( One-push Open)

⿠You can open it also manually without using the button. ⿠You need to close the FOMA terminal manually. If it does not close, open it fully and then close it.

One-push open button

Introduction

 Horizontal Open Style Open the display unit while you are softly depressing part A. Now you can watch 1Seg broadcast programs or messages in Horizontal Open Style.

⿠When you open the display unit, ensure that the hook is correctly engaged. If the hook is not correctly engaged,

re-open the FOMA terminal after closing it once.

Page 9

Precautions

Don’t

ALWAYS FOLLOW THESE DIRECTIONS

 Before using the FOMA terminal, read these safety precautions carefully so that you can use it correctly. After reading the precautions, keep them in a safe place.  Be sure to observe these safety precautions because they are designed to protect you or those around you from causing injury and to avoid unnecessary damage to the property.  The symbols below indicate the levels of danger or damage that can be caused if the particular precautions are not observed.

This symbol indicates that incorrect

Danger

Warning

Caution

handling will almost certainly cause death or serious injury.

This symbol indicates that incorrect handling poses a risk of causing death or serious injury.

This symbol indicates that incorrect handling poses a risk of causing injury or damage to the product or property.

The following symbols show speciﬁ c directions:

Denotes things not to do. (Prohibition)

Denotes the units not to disassemble.

Do not

disassemble

Denotes wet hands not to touch with.

Not wet

hands

Denotes the places where not to use, and caution not to wet it.

Avoid Water

Denotes mandatory instructions (matters that must be complied with).

Denotes the symbol to pull the power plug out of an outlet.

Pull the

power plug

out

“Safety Precautions” are divided into the following six sections:

General precautions for FOMA terminal, batteries, adapters, and UIM....................................................... P.8

Precautions for FOMA terminal ...................................................................................................................P.9

Precautions for batteries ............................................................................................................................ P.12

Precautions for adapters ...........................................................................................................................P.13

Precautions for UIM ................................................................................................................................... P.14

Notes on using near electronic medical equipment ................................................................................... P.14

Introduction

Page 10

General precautions for FOMA terminal, batteries, adapters, and UIM

Danger

Do not use, store, or leave the mobile phone or its accessories in places with a high

Don’t

Introduction

disassemble

temperature (such as near ﬁ re, near heating appliances, inside a kotatsu or near other furniture with heating elements, in places exposed to direct sunlight, or in cars heated by the sun).

The devices could be deformed or malfunction, or the battery may leak, overheat, burst, or catch ﬁ re, thus resulting in the deterioration of performance and shortening of the life of devices. Also, part of the case could get heated, causing bare skin burns.

Do not disassemble, modify or solder the FOMA terminal or accessories.

Do not

Accidents such as ﬁ re, injury, or electric shock, or malfunction may result. The battery may leak, overheat, burst or catch ﬁ re.

Do not wet the FOMA terminal or accessories.

If liquids such as water or pet urine get

Avoid

onto them, overheating, electric shock,

Water

ﬁ re, malfunction, injury or others may result. Pay attention to the place of use and the way of handling.

With your FOMA terminal, use the batteries and adapters speciﬁ ed by NTT DOCOMO, INC.

If you use any type of battery or adapter other than the speciﬁ ed one, your FOMA terminal, battery or other accessories may leak, overheat, burst, catch ﬁ re or malfunction.

Warning

Do not place the batteries, the FOMA terminal, adapters, or UIM in cooking appliances such

Don’t

as microwave ovens or highpressure containers.

The battery may leak, overheat, burst, or catch ﬁ re. The FOMA terminal or the adapter may overheat, smoke, or catch ﬁ re, or its circuit parts may become damaged.

Do not throw the FOMA terminal or accessories, or subject them to severe shocks.

Don’t

The battery may leak, overheat, burst, or catch ﬁ re. Also, malfunction or ﬁ re may result.

Be careful not to let electroconductive materials (metal pieces, pencil leads

Don’t

etc.) contact with the charging terminal or connector terminal. Also, make sure that those are not entered into the inside of the FOMA terminal.

Short-circuit could cause ﬁ re or malfunction of the FOMA terminal.

When you are in a place such as a gas station where ﬂ ammable gas is generated, turn off the FOMA

terminal, and never do charging. Otherwise, catching ﬁ re may result.

Ensure that you use Osaifu-Keitai with the FOMA terminal turned off when you are in the vicinity of the gas station. (When IC Card Lock is set, turn off the power with the lock released.)

If odor, overheat, discoloration, or deformation is detected during use, battery charge, or

storage, immediately observe the following:

1. Pull the power plug out of the outlet or cigarette lighter socket.

2. Turn off the power to the FOMA terminal.

3. Remove the battery pack from the FOMA terminal.

If you use the FOMA terminal and its accessories as they are, overheat, burst, or catching ﬁ re could result or the battery could leak.

Caution

Do not place the FOMA terminal or accessories on unstable locations such as wobbly tables

Don’t

or slanted locations.

The FOMA terminal or accessories may fall, resulting in injury or malfunction.

Page 11

Do not store in humid or dusty

Don’t

places, or in high temperature environments.

Malfunction may result.

If children use the FOMA terminal or accessories, a guardian should explain the safety precautions and correct operations. The guardian should also make sure that the instructions are followed during use.

Otherwise, injury may result.

Keep out of the reach of babies and infants.

Accidental swallowing or injury may result.

Be especially careful when you use the FOMA terminal for a long time with the adapter connected.

If you use i-αppli programs, talk on the videophone, watch 1Seg programs and so on for a long time during charging, the temperature of the FOMA terminal, battery pack, or adapter might rise. If you directly touch the part of high temperature continuously, redness, itching, rash, or low-temperature bare skin burns may result depending on your physical conditions or predisposition.

Precautions for FOMA terminal

Warning

Do not directly point the infrared data port at someone’s eyes during transmission.

His/her eyes may possibly be affected. Other infrared devices may operate erroneously if the infrared data port is pointed at them during transmission.

Do not shine the ﬂash/photo light close to eyes.

Doing so can damage eyesight. Also, accidents such as injury might occur if someone is startled or dazzled by the light.

Do not put the FOMA terminal in the place where it could be affected by an expanded airbag, e.g., on the dashboard.

If the airbag expands, the FOMA terminal could hit you and others, causing accidents such as injury and the FOMA terminal could malfunction and become damaged.

If you have any implanted electronic medical equipment, do not place your FOMA terminal in a chest pocket or inner pocket.

If the FOMA terminal is positioned close to electronic medical equipment, it may cause that equipment to malfunction.

Do not allow liquids such as water, or foreign materials such as metal pieces or ﬂammable materials to get into the UIM or microSD card slot of the FOMA terminal.

Fire, electric shock or malfunction may result.

Do not turn on the ﬂash/photo light to drivers of cars, and others.

It disturbs driving, and accidents may result.

Turn off the FOMA terminal in places where use is prohibited such as in airplanes and hospitals.

Otherwise, electronic devices and electronic medical appliances may be adversely affected. If the Auto Power ON function is set, deactivate the setting, then turn the power off. For use inside medical facilities, make sure that you comply with their regulations. You may be punished for using the FOMA terminal in airplanes, which is prohibited by law.

Introduction

Page 12

Don’t

Introduction

When talking with the FOMA terminal set to Hands-free, be sure to keep the FOMA terminal away from your ear. Further, when you play games or play back music with the earphone/microphone connected, adjust the sound volume to moderate volume.

The excessive sound volume impairs your hearing. Further, accidents may result due to the hardness of hearing of surrounding sound.

For those with weak heart conditions, the vibrator and ring volume must be adjusted carefully.

Those functions may cause an effect on the heart.

If thunder starts to rumble while you are using the FOMA terminal outdoors, house the antenna, turn off the power and move to a safe place.

Otherwise, you could be struck by lightning or suffer an electric shock.

Turn off the FOMA terminal when near electronic devices using high-precision control or

weak signals.

The FOMA terminal may possibly cause these devices to malfunction.

Electronic devices that may be

※

affected: Hearing aids, implanted cardiac pacemakers, implanted deﬁbrillators, other medical electronic devices, ﬁre alarms, automatic doors and other automatically controlled devices. If you use an implanted cardiac pacemaker, implanted deﬁbrillator or any other electronic medical device, consult the manufacturer or retailer of the device for advice regarding possible effects from the radio waves.

If the display part or camera lens is broken, be careful about broken glasses or the exposed interior of the FOMA terminal.

Plastic panels are used for the surfaces of the display part and camera lens so that glasses do not easily get scattered, however, pay attention not to erroneously touch the broken part or interior. Otherwise, injury may result.

Caution

Do not swing the FOMA terminal by its antenna or strap.

The FOMA terminal may hit you or persons around you, and accidents such as injury or malfunction and damage may result.

Do not use in places crowded with people.

The antenna may hit against others, causing an accident such as injury.

Do not use the FOMA terminal with the damaged antenna.

If the damaged antenna comes in contact with your skin, an accident such as a burn or injury could be caused.

When using the motion tracking, ensure that you check around you for safety, securely take hold of your FOMA terminal, and do not swing to an extent more than necessitated.

The motion tracking is the function to incline or swing the FOMA terminal for operation. If you excessively swing your FOMA terminal, it might happen that it hits against persons or objects, resulting in critical accidents or damage.

Page 13

Don’t

When a metallic strap is attached to your FOMA terminal, be careful that it does not hit against persons or objects when using the motion tracking.

Accidents such as injury or malfunction and damage may result.

If you erroneously break the display part and then crystal liquid gets leaked, never take or suck the liquid to or into your mouth, or apply to skin. If the crystal liquid gets into the eyes or mouth, immediately rinse it out with clean water and then seek medical attention. When it adheres to your skin or clothes, immediately wipe it away with alcohol etc., and then rinse it out with water and soap.

Otherwise, the loss of eyesight or injury to your skin may result.

Do not bring your ears close to the speakers while a ring tone sounds or a melody is played back from the FOMA terminal.

Otherwise, your hearing could be impaired.

Do not open the FOMA terminal by pressing the one-push open button near persons around you or your face.

The FOMA terminal may hit you or persons around you, causing accidents and injuries.

Do not use the FOMA terminal with the hook for Horizontal Open Style protruded.

Otherwise, injury may result.

Electronic devices in some types of cars can be affected by use of the FOMA terminal.

For safety’s sake, make sure not to use the FOMA terminal inside such cars.

Itching, rash or eczema may be caused depending on your physical conditions or

predisposition. If an abnormality occurs, stop using the FOMA terminal immediately, and then seek medical attention.

Metals are used for the following parts:

Where it is used Material Finishing

Charging terminal Phosphor

Hook for Horizontal Open Style

Metal part of the onepush open button

Metal part of the command navigation key

Shutter key Metal part of the

Private window side Metal part

of the 1Seg antenna

Screw (inside the Back cover)

bronze

Stainless steel

Aluminum

PC Evaporated

PC Evaporated tin,

Middle Stainless

steel Nickel titan

Lower

alloy

Root Stainless

steel

Hinge at

Brass Tin-and-cobaltbottom part

Steel Nickel-plated

Gold-plated ﬁnish with nickel-plated ground

Chrome-plated ﬁnish with nickelplated ground

Alumite treatment

aluminum, hard coating

hard coating

plated

Introduction

ー

Page 14

Don’t

Don’tDoDon’t

Don’t

Be careful not to get your ﬁnger or a strap caught in the parts when you close or open the

FOMA terminal.

Accidents such as injury or damage may result.

When you watch a 1Seg program, watch in a place bright enough taking a certain distance from the display.

Otherwise, your visual acuity could be

Introduction

reduced.

Precautions for batteries

Check the description on the label of

■

the battery pack for the type of battery.

Description Type

Li-ion 00 Lithium-ion battery

Danger

Do not let any metal object such as a wire come in contact the battery terminals. Also do not carry or store the battery together with any metal objects like a necklace.

The battery may leak, overheat, burst or catch ﬁre.

Do not use excessive force to attach the battery to the FOMA terminal even when you cannot attach it successfully. Also, check that the battery is the right way round when you attach it.

The battery may leak, overheat, burst or catch ﬁre.

Do not throw the battery into ﬁre.

The battery may leak, overheat, burst or catch ﬁre.

Do not pierce it with nails, hit it with a hammer, or step on it.

The battery may leak, overheat, burst or catch ﬁre.

If the battery ﬂuid gets into your eyes, do not rub them. Flush your eyes with clean water and seek medical attention immediately.

Otherwise, the loss of eyesight may result.

Warning

When any abnormality due to external shock such as the deformation or scratches by dropping is found on the battery pack, immediately stop using it.

The battery may leak, overheat, burst, or catch ﬁre. Also, malfunction or ﬁre may result.

If charging is not completed at the end of the speciﬁed charging time, stop charging.

Otherwise, the battery may leak, overheat, become damaged or catch ﬁre.

Immediately stop using the FOMA terminal and keep it away from ﬁre if the battery leaks or emits an odor.

The leaked battery ﬂuid may ignite, causing ﬁre or burst.

Be careful that your pets do not bite into the battery pack.

The battery may leak, overheat, burst, or catch ﬁre. Also, malfunction or ﬁre may

result.

Caution

An exhausted battery should not be disposed of with other waste.

The battery may catch ﬁre or damage the environment. After insulating the battery terminals with tape, take the unneeded battery to a handling counter such as a docomo Shop or dispose of it in accordance with local waste disposal regulations.

Do not charge the wet battery.

The battery pack may overheat, catch ﬁre, or burst.

Page 15

If the battery ﬂuid comes in

Don’t

contact with skin or clothes, immediately stop using, then

rinse it out thoroughly with clean water.

Skin injury may result.

Precautions for adapters

Warning

Do not use a damaged adapter cord or power cord.

Electric shock, overheating or ﬁre may result.

Do not use the AC adapter and desktop holder in steamy places such as a bathroom.

Electric shock may occur.

The DC adapter is for use only in a negative (-) grounded vehicle. Do not use it in a positive (+) grounded vehicle.

Fire may result.

If it starts to thunder, do not touch the FOMA terminal and adapter.

You might be struck by lighting or suffer an electric shock.

Never short-circuit the charging terminal when the adapter is plugged into the power outlet or cigarette lighter socket. Also, never touch the charging terminal with ﬁngers or other bare skin.

Fire, malfunction, electric shock or injury may result.

Place the adapter and desktop holder on a stable location while charging. Do not cover or wrap the adapter and desktop holder in cloth or bedding.

The FOMA terminal may drop off, or the adapter and desktop holder may overheat, causing ﬁre or malfunction.

Do not place something heavy on the adapter cord and power cord.

Electric shock or ﬁre may result.

Do not touch the adapter cord or power outlet with wet hands.

Electric shock may result.

Not wet

hands

Use the adapter at the speciﬁed V AC.

If you use it at a wrong voltage, ﬁre or malfunction may result. When using the

FOMA terminal overseas, use FOMA AC adapter available overseas. AC adapter: 100 V AC DC adapter: 12/24 V DC [For negative (-) grounded vehicles only] AC adapter available overseas: 100 V to 240 V AC [Connect only to household AC outlet]

If a fuse of the DC adapter has blown, replace it with a speciﬁed fuse.

If you use an unspeciﬁed fuse, ﬁre or malfunction may result. For the speciﬁed fuse, refer to each instruction manual.

Keep the power plugs dust-free.

Otherwise, ﬁre may result.

When pulling the AC adapter into the power outlet, ﬁrmly plug it in, taking care not to

contact with metal straps or the like.

Otherwise, electric shock, short-circuit or ﬁre may result.

Introduction

Page 16

Introduction

Pull the

power plug

out

Pull the

power plug

out

Pull the

power plug

out

Precautions for UIM

When removing the adapter out of the outlet or cigarette lighter socket, do not forcibly pull the adapter cord or power cord, instead take hold of the power plug and then pull.

If you pull the plug out by the cord, the cord may be damaged, which could result in electric shock or ﬁre.

When the adapter is not to be used for a long period of time, unplug the power cord from the outlet.

Otherwise, electric shock, ﬁre, or malfunction may result.

If liquids such as water get in the adapter, unplug the power cord immediately from the outlet or cigarette lighter socket.

Otherwise, electric shock, smoke or ﬁre may result.

Before cleaning, pull the power plug out of the outlet or cigarette lighter socket.

Otherwise, electric shock may result.

Caution

Be careful not to touch the cut surface of the UIM (IC portion) when removing it.

You may hurt your hand or ﬁngers.

Notes on using near electronic medical equipment

The description below meets

■

“Guidelines on the Use of Radiocommunication Equipment such as Cellular Telephones – Safeguards for Electronic Medical Equipment” by the Electromagnetic Compatibility Conference Japan.

Warning

Comply with the following in hospitals or health care facilities:

Do not carry the FOMA terminal into

⿠

operating rooms, intensive care units (ICU) or coronary care units (CCU). Turn off the FOMA terminal in hospital

⿠

wards. If there is any electronic medical

⿠

equipment near you, turn off the FOMA terminal even when in a location such as a lobby. Comply with any regulations of hospital

⿠

and health care facilities instructing you not to use or carry in a mobile phone. If the Auto Power ON function is

⿠

set,deactivate the setting, then turn the power off.

Turn off the FOMA terminal in crowded areas such as inside trains during rush hour, as

someone with an implanted cardiac pacemaker or implanted deﬁbrillator may be near you.

Operation of an implanted cardiac pacemaker or implanted deﬁbrillator can be affected by radio waves.

If you use an implanted cardiac pacemaker or implanted deﬁbrillator, use the mobile phone 22 cm or more away from an implanted cardiac pacemaker or implanted deﬁbrillator.

Operation of an implanted cardiac pacemaker or implanted deﬁbrillator can be affected by radio waves.

Patients using electronic medical equipment other than implanted cardiac pacemakers or implanted deﬁbrillators (outside medical establishments for treatment at home, etc.) should check the inﬂuence of radio waves upon the equipment by consulting its manufacturer.

Operation of electronic medical equipment can be affected by radio waves.

Page 17

Handling Precautions

General notes

Do not wet the equipment.

The FOMA terminal, battery, adapter, and UIM are not waterproofed. Do not use them in environments, which are high in humidity such as in bathrooms, and do not allow them to get wet from rain. Furthermore, if carrying them against your body, they become moist due to perspiration and the internal parts may become corroded, causing malfunction. If the parts are found to have been damaged due to exposure to the liquids, any repairs will not be covered by warranty, or repairs may not be possible. This may be repaired at a cost if repairs are possible.

Use a dry soft cloth such as the one for cleaning glasses to clean the equipment.

⿠The screen of the FOMA terminal sometimes

has a special coating so that they are easier to see. If you rub it roughly with a dry cloth, it might be scratched. Take care of the way of handling, and use only a dry, soft cloth such as the one for cleaning glasses. If the screen is left with water drop or stain adhered, smear may be generated or the coating might peel off.

⿠Do not use alcohol, thinner, benzene, detergent

orother solvents for cleaning, otherwise the printing may be removed or discoloration may result.

Occasionally clean the terminals of the equipment using a dry cotton swab, etc.

The soiled terminals deteriorate the connection and might cause power discontinuity or incomplete charging. Wipe the terminals with a cotton swab, etc. Take care not to damage the terminals when cleaning them.

Do not place the FOMA terminal near an air conditioner outlets.

Condensation may form due to rapid changes in temperature, and this may corrode internal parts and cause malfunction.

Do not apply excessive force onto the FOMA terminal and battery pack.

If you put the FOMA terminal in a bag along with many other articles or sit with the FOMA terminal in a clothes pocket, the display, inter nal circuitry and the battery pack could be damaged or malfunction. Also, if an external device is left connected to the connector terminal (earphone/microphone terminal), the connector could be damaged, or malfunction.

Carefully read each instruction manual attached to the FOMA terminal, adapter, or desktop holder.

Do not rub or scratch the display part with metals.

Doing so might cause damage to the part, resulting in trouble or malfunction.

Notes on handling the FOMA terminal

Avoid using in extremely high or low temperatures.

The FOMA terminal should be used within a temperature range of 5°C to 35°C and a humidity range of 45% to 85%.

The FOMA terminal, if operated near landline phones, television sets, radios or other devices that are in use, may affect them. You should operate your FOMA terminal as far away from such equipment as possible. It is recommended that you make separate



notes of the information stored in the FOMA terminal and keep such notes in a safe place.

We take no responsibility for any loss of the stored data items.

Do not drop the FOMA terminal or subject it to strong impacts.

Malfunction or damage may result.

Do not insert an external device to the connector terminal (earphone/microphone terminal) at a slant when connecting, and do not pull it out when it is inserted.

Malfunction or damage may result.

Make sure that nothing, such as a strap, gets caught between the parts of the FOMA terminal when you close it.

Otherwise, malfunction or damage may result.

The FOMA terminal becomes warm during use or charging but this is not an abnormality. Use the FOMA terminal as it is. Do not leave the camera in places exposed to direct sunlight.

Pixels may be discolored or burns may result.

Usually, put the cover of the connector terminal to use the FOMA terminal.

Dust or water might enter into the FOMA terminal, causing malfunction.

Do not use the FOMA terminal with the back cover left removed.

The battery pack might come out, or malfunction or damage may result.

Introduction

Page 18

Do not apply an excessively thick sticker



onto the surfaces of the display, keys, or buttons.

Malfunction may result.

While you are using the microSD card,



never take it off or turn off the power to the FOMA terminal.

Data may be erased or malfunction may result.

Do not place magnetic cards or similar



objects near the FOMA terminal or between phone parts.

Magnetic data on cash cards, credit cards,

Introduction

telephone cards and ﬂoppy disks, etc. may be deleted.

Do not bring magnetic substances close to



your FOMA terminal.

Strong magnetic items might cause in erroneous operation.

Notes on handling batteries

Batteries have a limited life.



Though it varies depending on the usage state, you are advised to replace the battery if its usable time is extremely short even when you fully charge it. Make sure that you buy the speciﬁed battery.

Charge the battery in a place with an



appropriate ambient temperature of 5°C to 35°C.

Make sure that the battery is charged when you use the FOMA terminal for the ﬁrst time or have not used it for a long period of time.

The usable time of the battery differs



depending on the usage environment or its remaining life.

Depending on how the battery pack is



used, it might swell as its operating life becomes short, but this is not a problem.

Note the following points when you store a



battery pack over a long period:

Storage in a fully charged state (the state

⿠

immediately after charging is completed) Storage with no battery power left (the state you

⿠

cannot turn on the power of the handset due to

battery drain) These may lower the battery pack’s performance and shorten its operating life. You are advised to store the battery pack in the state of two or three bars of battery icon indication as a guide for when you store it for a long period.

Notes on handling adapters

Charge the battery in a place with an



appropriate ambient temperature of 5°C to 35°C. Charge the battery where:



There is very little humidity, vibration, and dust.

⿠

There are no land-line phones, television sets or

⿠

radios nearby.

While you are charging, the adapter may



become warm. This is not a malfunction, so you can keep on using. Do not use the DC adapter for charging the



battery when the car engine is not running.

The car battery could go ﬂat.

When using the power outlet having the



disengaging prevention mechanism, observe the instructions given in that instruction manual. Do not give a strong shock. Also, do not



deform the charging terminal.

Malfunction may result.

Notes on handling the UIM

Never use more force than necessary when



inserting/removing the UIM.

The UIM may become warm during use,



but this is not a sign of a malfunction. Continue using it as it is.

The warranty does not cover damage



caused by inserting the UIM into some other types of IC card reader/writer.

Always keep the IC portion clean.



Use a dry soft cloth such as the one for



cleaning glasses to clean the equipment. It is recommended that you make separate



notes of the information stored on the UIM and keep such notes in a safe place.

We take no responsibility for any loss of the stored data items.

For the environmental protection, bring



any unneeded UIMs to a handling counter such as a docomo Shop.

Avoid using in extremely high or low



temperatures. Do not damage, carelessly touch, or short-



circuit the IC.

Data might be lost or malfunction may result.

Do not drop the UIM or subject it to strong



impacts.

Malfunction may result.

Do not bend the UIM or place something



heavy on it.

Malfunction may result.

Into the FOMA terminal, do not insert the



UIM with a label or sticker pasted.

Malfunction may result.

Page 19

Notes on using Bluetooth function

As the security for communication using



the Bluetooth function, the FOMA terminal supports the security function that meets the Bluetooth Speciﬁcation. However, the security may not be sufﬁcient depending on the conﬁguration. Take care of the security for communication using the Bluetooth function.

Note that even if any leak of data or



information occurs while making connection using the Bluetooth function, we take no responsibility.

With the FOMA terminal, you can use the



following: Headset, Hands-Free, Audio, Dial-up Communication, Object Push, and Serial Port. With Audio, you might be able to use Audio Video Remote Control. (Only with the compatible Bluetooth devices)

Radio frequencies



The radio frequencies the Bluetooth function of the FOMA terminal uses are as follows:

2.4 FH 1

2.4 : Indicates radio facilities that use 2400

FH : Indicates the modulation system is the

1 : Indicates that a supposed coverage

MHz frequencies.

FH-SS system.

distance is 10 meters or less.

Indicates that all radio frequencies 2400 MHz through 2483.5 MHz are used, and that the frequencies for mobile object identiﬁers shall not be avoided.

Cautions on Using Bluetooth Devices



Bluetooth operates at radio frequencies assigned to the in-house radio stations for mobile object identiﬁers that have to be licensed and are used in production lines of a factory, speciﬁc unlicensed low power radio stations, and amateur radio stations (hereafter, referred to “another radio station”) in addition to scientiﬁc, medical, industrial devices, or home electric appliances such as microwave ovens.

1. Before using this product, make sure that “another radio station” is not operating nearby.

2. If radio interference between this product and “another radio station” occurs, move immediately to another place or turn off power to avoid interference.

3. For further details, contact “docomo

Information Center” on the back page of this manual.

Notes on handling the FeliCa reader/writer

The FeliCa reader/writer function on the



FOMA terminal uses very weak radio waves which do not require to be licensed as radio stations.

The FeliCa reader/writer is operated on



the 13.56 MHz frequencies. When you use another reader/writer nearby, take enough distance between your FOMA terminal and the reader/writer. Further, ensure that there are no radio stations that use the same frequencies.



Caution

Do not use the modiﬁed FOMA terminal.



Using a modiﬁed FOMA terminal infringes the Radio Law.

The FOMA terminals are granted technical regulations conformity certiﬁcation as the speciﬁed radio equipment under the Radio Law and bear a “technical conformity mark as evidence of conformity. Unscrewing the FOMA terminal and modifying internal components void the technical regulations conformity certiﬁcation. Do not use the FOMA terminal in this state, which infringes the Radio Law.

Be especially careful not to operate the



FOMA terminal while driving.

You will be imposed punishment if you use the mobile phone in your hand while driving. If you answer a call out of necessity, tell the caller with Hands-free that you will call him/her back, park your car to somewhere safe, and then dial.

Use the Bluetooth functions in Japan only.



The Bluetooth functions on the FOMA terminal have been authorized in compliance with the radio transmission standards in Japan. You might be imposed punishment if you use them overseas.

Use the FeliCa reader/writer functions in



Japan only.

The FeliCa reader/writer functions on the FOMA terminal have been authorized in compliance with the radio transmission standards in Japan. You might be imposed punishment if you use them overseas.

” on the nameplate

Introduction

Page 20

Attach the battery pack.

Insert the UIM.

Before Using

Attaching UIM (FOMA Card)/ Battery Pack

Remove the back cover.

While pressing the “ ” in direction A, slide the back cover (2 mm or more) in direction B to unlock it.

Insert the UIM.

With the golden IC surface downward, push the UIM slowly

Basic Operation

to the end while pressing surface.

⿠Take care not to damage the IC portion.

When you remove the UIM

Pull it out slowly while sliding.

About UIM

The UIM is an IC card that holds your information such as phone numbers. You cannot use the FOMA terminal for communications such as voice/videophone calls, i-mode, or sending/receiving mail, unless the UIM is inserted.

Cut

Attach the battery pack.

With the arrow mark facing up, ﬁ t the tab side of the battery pack to the FOMA terminal securely, and then push the battery pack in direction B while pressing it against direction A.

When you remove the battery pack

Engage your claw on the projection of the battery pack, and lift it up.

Attach the back cover.

Put the back cover to the FOMA terminal as illustrated, and while pressing the whole part of the back cover downward, slide it in the direction of the arrow to attach it.

⿠Conﬁ rm there is no gap between the back cover and the FOMA terminal.

⿠You cannot use the UIM (blue) on your FOMA terminal. If you have that blue one, have it replaced at a docomo Shop.

Arrow mark

Projection

Page 21

Charging

Lock claw

Connector terminal

(down side)

AC Adapter’s plug

Engraved

surface

Call/Charging indicator

Stopper

Desktop Holder

Power socket

AC Adapter

When Charging Only with the AC Adapter

Cover

Release buttons

Engraved surface

Connector terminal

Insert the connector with the engraved surface facing up until it clicks. Pull straight the connector out while pressing the release buttons.

⿠To charge the battery, place the cover of the connector terminal as illustrated. Pull out the cover of the connector terminal in direction A, and turn it in direction B.

Plug the connector of the AC Adapter (option) horizontally with its engraved side facing down into the connector terminal of the Desktop Holder (option).

Pull out the AC Adapter’s plug, and plug it into a household power socket of 100 V AC.

Put the bottom of the FOMA terminal into the stopper of the desktop holder (A) to ﬁ t the head to the lock claw, and then depress the FOMA terminal until it clicks (B).

⿠Be sure to charge the FOMA terminal with the FOMA terminal closed. ⿠Be careful that a commercial strap is not caught between the FOMA terminal and desktop holder.

When charging is completed, hold the desktop holder with ﬁ ngers and lift up the head of FOMA terminal to remove.

⿠For detaching, pull out the connector horizontally while pressing the release buttons. Malfunction could result if you try to pull it forcibly. ⿠When charging starts, the Call/ Charging indicator lights in red. When charging is completed, it turns off.

Basic Operation

Page 22

Turning Power ON

Press and hold -h for at least one second.

After the Wake-up display is displayed, the Stand-by display appears.

To turn power off

Press and hold -h for at least two seconds.

Conﬁ guring Initial Setting

The Initial Setting display appears when you turn on the power for the ﬁ rst time.

Set the date and time.

You can set the date and time. You can also correct the date and time automatically.

Set your Terminal Security Code.

You can set your Terminal Security Code required for setting functions.

⿠“0000” is set at purchase.

Basic Operation

The Initial Setting display appears when any of items through step 1 to step 5 at right have not been initialized. In that case, follow onscreen instructions.

Set Keypad Sound.

You can select whether to let a keypad sound play.

Set Location Request Set.

You can select whether to notify your current location for when a GPS location provision request arrives.

Set the size of fonts.

You can set the size of fonts on the display at a time.

Page 23

Checking Your Own Phone Number

Switching to English Display

from the Stand-by

▶

display

▶

Own number

You can press tabs.

⿠From the display on the right, press +l( name, mail address, etc.

Phonebook

+No

You can check your own phone number also by pressing from the Stand-by display.

to switch the

) to store your

+m+0

Own number

from the Stand-by display

▶



󱽄



󱽄



Select “English (

⿠When you install the UIM onto the FOMA terminal, the “

バイリンガル

on the UIM.

(Set./Service)

(Display)

( Select language)

)”.



(Select language)” setting is saved

Basic Operation

Page 24

Screen Explanation

Viewing Display/Icon

Battery level (estimate)

Full Low

⿠When is shown, charge the battery.

⿠Depending on the usage state, the battery level indication might signiﬁ cantly vary.

Radio waves reception level (estimate)

Basic Operation

Strong Weak

······· You are out of the FOMA service area or radio waves do not reach.

··········Unread i-mode mail or SMS messages exist.

········New i-concier information exists.

········· A microSD card is inserted.

·········· A Bluetooth device is

connected.

Status icon

········Vibrator is set.

········Ring Volume is set to “Silent”.

········In Manner Mode

···· An alarm is set.

·········View Blind is set.

········The number of record messages

········· The number of videophone record messages

Here are given descriptions of the main icons. For descriptions of other icons appearing in the display, you can get them following the procedures as shown below:

from the Stand-by display

󱽄

使いかたナビ

This function is available in Japanese mode only.

※

(Guide)

󱽄

LifeKit

󱽄

表示アイコン説明

(Icons)

Page 25

Notiﬁ cation icon

········ Missed call

········· Record message

········· Videophone record message

······· New i-mode mail or SMS

Desktop icon

········



········ i-concier

········· Dictionary

·········· Pedometer

(Guide)

Private Window

When you close the FOMA terminal, the Stand-by display appears on the Private window. While you are talking, making or receiving a call, or when you press a side key with the FOMA terminal closed, information appears on the Private window.

⿠When you press .< with the Stand-by display shown on the Private window, displays on the Private window are cleared. ⿠If you close your FOMA terminal while running a function such as 1Seg, the function that is running appears on the Private window. The Private window shifts to the Stand-by display when a function that cannot be displayed on the Private window is running.

Basic Operation

Proceed to respective functions from icons

You can proceed to respective functions from “Status icon”, “Notiﬁ cation icon”, and “Desktop icon”.

from the Stand-by display

+Oo

▶

Use

to highlight an icon

+Mo

▶

(

+Oo

)

When a Missed Call is Found

When “ ” is displayed on the Stand-by display, press

to display the latest detailed Missed Call display.

When you press .g, the Stand-by display returns.

⿠The Machi-chara image and desktop icons are not displayed on the Stand-by display of the Private window. ⿠Even when a display for selecting “YES/NO” is shown on the Private window, you may not operate with the FOMA terminal closed.

Page 26

Navigation Displays and Key Operations

Key Operations in Normal Style

■

Key operations you can do while you are operating a function are shown at the bottom of the display. (Navigation displays)

Key assignments and basic navigation displays



Command navigation key



+Zo

Moves the cursor or

⿠

highlighted display up. (Hold down to scroll continuously.) Scrolls the page up.

⿠

+Oo

Fixes the operation.

⿠

+Vo

Moves the cursor to the

⿠

right. Scrolls forward page

⿠

by page. (Hold down to scroll continuously.)

Basic Operation

Operations you can perform with the +l

󰿿

key.

Operations you can perform with the +m

󱀀

key.

Operations you can perform with the key.

󱀁

Directions in which you can scroll and select items with the

Operations you can perform with the +c

󱀂

key.

Operations you can perform with the +i

󱀃

key.

+Mo

key.

+Oo

+Co

Moves the cursor to the

⿠

left. Scrolls back page by

⿠

page. (Hold down to scroll continuously.)

+Xo

Moves the cursor or

⿠

highlighted display down. (Hold down to scroll continuously.) Scrolls the page down.

⿠

Page 27

Key Operations in Horizontal Open Style

■

Key operations you can do are shown the same way as in Normal Style at the bottom of the display.

While the vertical display is shown, you can operate the

⿠

same way as in Normal Style even in Horizontal Open Style. Even when you have operated on the horizontal

⿠

display, the display might switch to the vertical display depending on the function.

Difference in key operations

Key assignments differ between Normal Style and Horizontal Open Style. Follow and operate respective Navigation displays. <Example: Displaying the Function Menu on the Inbox

Folder list>

In Normal Style



Press +i.

In Horizontal Open Style



Press +c.

Basic Operation

Page 28

Menu Operation

Main Menu

■

Press +m from the Stand-by display to show Main Menu.

Menu icon

Menu icon name

In this manual, the item names shown here are described in operating

Basic Operation

Stand-by display Main Menu

Use Functions categorized by every menu item are displayed. Repeat selecting items to call up the target function.

⿠

to highlight a menu icon and press

+Mo

You can press -r to return to the previous display.

When you press -h from any display, the Stand-by

display returns.

You can display some functions by pressing +m + menu number from the Stand-by display. See “Function List” for the menu items and menu numbers of each function. (See page 88) In this volume, the descriptions of operating procedures are given primarily starting with the Stand-by display.

procedures, etc.

( ).

+Oo

Horizontal Open Menu

■

Press +m from the horizontal Stand-by display to open Horizontal Open Menu that enables you to quickly access the functions that are available to the horizontal display.

Some operating

⿠

procedures and menus shown on the Horizontal Open Menu differ from those on the display in Normal Style as described

Simple Menu

■

Simple Menu is a menu focusing on only basic functions for easy operation. By setting “Menu icon setting” to “Simple menu”, you can show the Simple Menu by pressing +m from the Stand-by display.

Some operating procedures or items

⿠

which appear on the display in Simple Menu differ from the ones described in this manual.

in this manual.

Page 29

Function menu

When “

” is displayed at the lower right of the display, you can use functions such as Store, Edit, and Delete by pressing +i.

<Example> Display the Function menu of a Phonebook

entry

Functions start to work by simple operation

You can either start a function by selecting a menu item on the menu or can start it by simple key operation in the Stand-by display or with the FOMA terminal closed, depending on the function. The following are the functions you can start by pressing keys for at least one second.

Operations from the Stand-by display



Key Performance

Shows the Registration display for Phonebook entries.

-Xo

Executes Check New Messages.

Shows the Software list.

Starts 1Seg.

Switches “Lighting” of Backlight on/off.

-5

Switches View Blind on/off.

-8

Activates/Deactivates Public mode (Drive mode).

-a

Activates/Deactivates Manner Mode.

-s

Activates the camera in Photo Mode.

Operations while the FOMA terminal is closed



Key Performance

Activates/Deactivates Manner Mode

Starts 1Seg

Basic Operation

Page 30

Using Touchpad

You can use the Touchpad, in stead of pressing Press -t to switch between ON/OFF of the Touchpad. When switched to ON, the Touchpad lamp lights in blue.

⿠You can also use the Touchpad in Horizontal Open Style.

Touchpad Touchpad

lamp

Touchpad

Basic Operation

switch key

Lets tap

Tap the Touchpad. The same as pressing

⿠To tap, do it softly around -5. If you tap the ends of the Touchpad, your tap is not sensed.

Slide and leave

With your ﬁ nger placed on the Touchpad, move your ﬁ nger up/down and left/right, and then detach. The same as pressing

+Oo

+Mo

+Oo

, for moving the cursor or scrolling the display.

+Mo

Slide and stop

With your ﬁ nger placed on the Touchpad, move your ﬁ nger up/down and left/right, and then stop. The same as pressing

When you access a site using i-mode or Full Browser

You can move the pointer even to slide at a slant. With your ﬁ nger placed on the right end of the Touchpad, slide it up or down to scroll the display vertically. With your ﬁ nger placed on the bottom of the Touchpad, slide it left or right to scroll the display horizontally.

⿠You can slide the right end or lower end to scroll the display even in Horizontal Open Style.

⿠You might not be able to operate the Touchpad depending on the site or i-αppli program. If you cannot, use

+Oo

+Mo

consecutively.

to operate.

Page 31

Character Entry

You can enter characters on the Registration display for Phonebook entries or the Composition display for mail messages.

Switch between input modes.

Each time you press +l( ), input modes are switched.

abc: Alphabet input mode

123: Numeral input mode

: Kanji/Hiragana input mode



: Katakana input mode



Enter characters.

By repeatedly pressing a numeric key, you can enter other characters assigned to the key.

<Example> When you press

Kanji/Hiragana input mode

「か→き→く→け→こ」

Katakana input mode

「カ→キ→ク→ケ→コ→2」

Alphabet input mode

「a→b→c→A→B→C→2」

Numeral input mode

「2」

Other key operations

(

(for at least one second): Enter symbols.

: Enter a line feed.

-a

(You can switch between uppercase and lowercase or enter “゛” and “゜” by pressing this key after you enter a character.)

(for at least one second): Undo the ﬁ xed/erased

-d

: Clear text.

-r

Convert/ﬁ x characters.

1. Press to be converted.

2. Press

onto the candidate list.

3. Press

conversion candidate.

4. Press

): Enter pictograms.

): Enter smileys.

to specify the area

+No

to move the cursor

+Bo

to select a

+Mo

to ﬁ x the character.

+Oo

characters.

Basic Operation

Page 32

<Example> Entering “



” in a text memo.

from the Stand-by

display

▶

Text memo

▶

Select <Not recorded>.

Enter hiragana characters

Basic Operation

in Kanji/Hiragana input mode.

Press -4 once and

た→

once.

Press -4 once and -a

だ→

once.

Press -5 ﬁ ve times.

の→

Press -2 once.

か→

Press -3 twice.

し→

⿠When a character on the same key comes after a character such as “あ” and “い”, press the cursor, and enter the next character.

▶

Stationery

+Vo

Use

to move the

+Co

cursor onto “”.

Use

to move the

+Bo

cursor onto the candidate

▶

Use

list

to move

+Vo

“



(

Use

+Bo

candidate list “

” and press Oo(



” and press

to highlight

+Mo

to move the cursor onto the

▶

Use

to highlight

+Mo

Page 33

Sound/Screen Setting

Changing Ring Tone

<Example> Changing the ring tone for incoming voice

calls

from the Stand-by display

▶

Set./Service▶Sound

▶

Select ring tone

Select “Phone”.

⿠To set a ring tone for mail messages, videophone calls, and so on, select the corresponding item.

Select “Select ring tone”.

⿠Press +l( ) to check the content actually played back or displayed.

Select a type of ring tone.

Select a folder▶Select a ring tone.

Adjusting Ring Volume

<Example> Adjusting the ring volume for incoming

voice calls

from the Stand-by display

▶

Set./Service▶Sound▶Ring volume

Select “Phone”.

⿠To adjust ring volume for mail messages, videophone calls, and so on, select the corresponding item.

Use

to adjust the volume.

+Bo

Setting Vibrator

You can set the vibrator to notify you of incoming calls. <Example> Setting the vibrator for incoming voice calls

from the Stand-by display

▶

Set./Service▶Incoming call

▶

Vibrator

Select “Phone”.

⿠To set a vibrator for mail messages, videophone calls, and so on, select the corresponding item.

Basic Operation

Select a pattern.

Page 34

Using Manner Mode

Just by pressing a key, you can make a tone from the FOMA terminal such as a ring tone, keypad sound, and alarm sound silence. When you start Manner Mode, not a sound but the vibrator works to notify you of incoming calls or messages.

Press and hold -s for at least one second from the Stand-by display.

Setting Keypad Sound OFF

You can silence a Keypad sound for when you press a key.

from the Stand-by display

▶

Set./Service▶Sound

▶

Keypad sound

Select “OFF”.

Basic Operation

Using Original

You can use “Original” to tailor your FOMA terminal to how it works while Manner Mode is ON.

1. +m from the Stand-by display

▶

Incoming call▶Manner mode set▶Original

2. Set each item.

3. Press +l(

To release

Perform the same operation.

▶

Set./Service

“ ” appears on the Stand-by display.

Changing Displays

<Example> Changing the Stand-by display

from the Stand-by display

▶

Set./Service▶Display

▶

Display setting

Select “Stand-by display”.

⿠To set a display for making/receiving calls, or to show a battery icon, select the menu that corresponds to that item.

Select a type of image.

Select a folder▶Select an image.

Page 35

Backlight

■

You can set Backlight to OFF. Then the display dims, and the keys turn off.

Press and hold -5 for at least one second from the Stand-by display.

“ ” appears on the Stand-by display.

To set back to on

Perform the same operation.

Power Saver Mode

When you do not use the FOMA terminal for a certain period, Power Saver Mode clears away images on the display, suppressing power consumption of the battery. Follow the procedures as described below to specify the time until when Power Saver Mode starts:

1. +m from the Stand-by display

▶

Display▶Backlight

2. Select “Lighting”

3. Enter a time (seconds) until when Power Saver Mode starts.

▶

Select “ON” or “OFF”.

▶

Set./Service

View Blind

■

You can make the display hard to see from people around.

Press and hold -8 for at least one second from the Stand-by display.

“ ” appears on the Stand-by display.

To release

Perform the same operation.

Menu Icon Setting

■

You can select a pattern of the Main Menu display.

from the Stand-by display

▶

(

Select a pattern.

)

Basic Operation

Page 36

Font Size Setting

■

You can change font sizes at a time.

from the Stand-by display

▶

Set./Service▶Display

▶

Font size setting

Kisekae Tool

You can set the ring tone, Stand-by display, menu icons and others at a time.

from the Stand-by display

▶

Set./Service▶Kisekae

Select “Set at one time”.

⿠You can also specify a font size for each function such as “Mail” or “Phonebook”.

Select a font size.

Basic Operation

Set to Machi-chara

■

A Machi-chara image appears to tell you missed calls, new mail messages, new i-concier information and others.

from the Stand-by display

▶

Set./Service▶Display▶Machi-chara

▶

Set to Machi-chara

Highlight a Machi-chara image and

press +l(

Highlight a Kisekae Tool ﬁ le and

press +l(

Select “YES”.

⿠Some menu conﬁ gurations change according to the usage frequency depending on the type of the menu.

Reset Menu Icons to Default

1. +m from the Stand-by display

▶

Reset

2. Enter your Terminal Security Code

▶

“Reset menu screen”▶Select “YES”.

▶

(

)

Page 37

Changing Illumination

You can select a pattern of the illumination for incoming calls or messages, or talking at a time.

from the Stand-by display

▶

Set./Service▶Illumination

Select “All illum. setting”.

⿠To select a pattern of illumination separately for incoming calls or messages, or talking, select it for each.

Select a pattern.

The indicator lights/ﬂ ickers in the set pattern when a voice call or message comes in.

Checking Missed Calls and New Mail by Tone and Call/Charging Indicator

With the FOMA terminal closed, you can check for missed calls, new mail and others.

Press .> while the FOMA terminal is closed.

Double-beep tone: You have a missed call or new mail. (The Call/Charging indicator lights.) Triple-beep tone: You have no missed calls or new mail. (The Call/Charging indicator ﬂ ickers.)

⿠When “Info notice setting” is set to “ on the Japanese display, a voice message announces that you have a missed call or new mail.

ボイス

(voice)”

Basic Operation

Page 38

Lock/Security

Various Security Codes

■Caution on security codes ⿠You should avoid using the numbers for security codes such as denoting your birth date, part of your phone number, local address number, room number, “1111” or “1234” that is easily decoded by a third party. Also make sure that you take a note of the security codes you have selected just in case you forget them. ⿠Take care not to let others know your security codes. Even if your security codes are known and used by a third party, we at DOCOMO take no responsibility in any

Basic Operation

event for the resultant loss. ⿠If you do not remember your respective security codes, you need to bring an identiﬁ cation card such as your driver’s license, the FOMA terminal and UIM to the handling counter of a docomo Shop. For details contact “docomo Information Center” on the back page of this manual.

Terminal Security Code

■

This is a four- to eight-digit numbers for deleting all ﬁ les or changing settings. When the display for entering the Terminal Security Code appears, enter your four- to eight-digit code and press

To change

1. +m from the Stand-by display

▶

Lock/Security▶Change security code.

Network Security Code

■

This is a four-digit numbers required for your identiﬁ cation when you place an order for at a docomo Shop, docomo Information Center, or “ or when you use respective network services.

To change

From i-mode, you can change your Network Security Code from “ settings (Conﬁ rmation/Change/Use)]” on “ (User support)”.

i-mode Password

■

This is a four-digit numbers required for registering/ deleting My Menu, applying for/canceling Message Services or i-mode pay services, etc.

To change

From i-mode, you can change your i-mode password by selecting “iMenu” → “English” → “Options”

“Change i-mode Password”.

→

各種設定（確認・変更・利用）



▶

Set./Service

Determining at the time of contract

“0000” at the time of your contract

“0000” at purchase

(

+Oo

(User support)” site,

[Respective

お客様サポート

Page 39

PIN1 Code/ PIN2 Code

■

The PIN1 code is a four- to eight-digit numbers for checking the user each time the UIM is inserted into the FOMA terminal or each time the FOMA terminal is turned on, to prevent the unauthorized use by a third party. The PIN2 code is a four- to eight-digit numbers for executing Reset Total Cost, using the user certiﬁ cate or applying for the issue of it. When the PIN1 Code/PIN2 Code Entry display appears, enter your four- to eight-digit PIN1 code/PIN2 code and press

⿠If you enter a wrong PIN1 code/PIN2 code three times in succession, it is locked and the FOMA terminal cannot be used.

To change

1. +m from the Stand-by display

▶

Lock/Security▶UIM setting

2. Enter your Terminal Security Code

▶

Select “Change PIN1 code” or “Change PIN2 code”. ⿠You need to have set “PIN1 code entry set” to “ON” to change the PIN1 code.

+Oo

(

“0000” at the time of your contract

▶

Set./Service

PUK (PIN Unblock Code)

■

The PUK (PIN unblock code) is the eight-digit numbers for releasing the PIN1 code and PIN2 code locks. It is on your contract application form (counterfoil) that is handed over to you at the time of purchase. You cannot change this code by yourself.

⿠If you enter a wrong PUK (PIN unblock code) 10 times in succession, the UIM is locked.

PIN1 Code Entry Set

■

You can set the FOMA terminal not to work unless you enter your PIN1 code when turning the power on.

from the Stand-by display

▶

Set./Service▶Lock/Security

▶

UIM setting

Enter your Terminal Security Code

▶

Select “PIN1 code entry set”.

Select “ON”▶Enter the PIN1 code.

To release

Select “OFF”.

Basic Operation

Page 40

Various Lock Functions

The FOMA terminal has the following lock functions:

Lock All You can do no operations other than

answering calls and turning on/off the power.

IC Card Lock

Omakase Lock When you have lost your FOMA

Basic Operation

Personal Data Lock Key Lock The keys except -h are disabled.

You cannot use the Osaifu-Keitai, ToruCa download, iC Communication, etc.

terminal or in other cases, you can lock your personal data (such as Phonebook entries) and the IC Card function of Osaifu-Keitai by contacting DOCOMO.

Setting/Releasing Omakase Lock

0120-524-360

Business hours: 24 hours

You can set/release also from the My

※

docomo site via your personal computer or other devices. (In Japanese only) ⿠For details on Omakase Lock, refer to “Mobile Phone User’s Guide [i-mode] FOMA version”.

You are disabled to open Phonebook entries or schedule events.

Incoming Call Restriction

Call Setting without ID

■

You can set whether to receive (accept) or not to receive (reject) a voice call and videophone call according to the reason for no caller ID. There are three reasons; “Unavailable”, “PublicPhone”, and “User unset”.

from the Stand-by display

▶

Set./Service▶Lock/Security

▶

Call setting w/o ID

Enter your Terminal Security Code

▶

Select a reason for no caller ID.

Select “Accept” or “Reject”.

⿠If you select “Accept”, you can set a ring tone for incoming calls without caller IDs.

Reject Unknown

■

You can reject a call from a party whose phone number is not stored in the Phonebook.

from the Stand-by display

▶

Set./Service▶Lock/Security

▶

Reject unknown

Enter your Terminal Security Code

▶

Select “Accept” or “Reject”.

Page 41

Reset to Default

Reset Settings

■

You can reset the items on “Function List”, which are indicated by

⿠The items indicated by which do not return to the default setting or state.

from the Stand-by display

▶

Set./Service▶Other settings

▶

Reset settings

Enter your Terminal Security Code

▶

Select “YES”.

Initialize

■

You can delete all stored ﬁ les at a time and reset all settings to their defaults.

from the Stand-by display

▶

Set./Service▶Other settings

▶

Initialize

Enter your Terminal Security Code

▶

Select “YES”.

. (See page 88).

might include the function

Resetting Data by Remote Control

If you contract with the service of this function (Business mopera anshin manager), you can initialize data (memory within the handset/microSD card/UIM) on your FOMA terminal by your offer (administrator).

Inquiries

docomo Business Online

From personal computers http://www.docomo.biz (in Japanese only)

You may not be able to access due to system

※

maintenance, etc.

When Remote Reset starts

The display appears telling that operation is disabled and the initialization starts.

When Remote Reset starts, all key operations except

・

those for answering a voice call and holding answer (On Hold) are locked. When the initialization starts, you are disabled to use all functions.

When Remote Reset starts while the call is coming

・

in or you are talking, all key operations except those for +d and +h are locked. When the initialization starts, the coming in call and your talk are disconnected automatically.

⿠The microSD card might not be initialized when the FOMA terminal is connected to a personal computer.

Basic Operation

Page 42

Call Telephone

Making a Call/Videophone Call

From the Stand-by display, enter a

phone number starting with a city code.

Press +d to make a call.

⿠To make a videophone call, press instead of d.

Press +h to end the call.

Connect

You can put a call on hold by pressing

+Oo

call. You can release holding by pressing

+Oo

) during a

(

+c+

( )

Making a Call from Phonebooks

■

<Example> Search a Phonebook entry by the name

stored in Phonebook

Press

Select “Name?”.

From the second search, the search-method-selection display does not appear. To show it again, press

⿠You can use another search method such as “Phone number?”, “Mail address?”, and others.

Enter a part of the phone number

⿠If you enter nothing and press display all Phonebook entries.

Select a Phonebook entry.

When an entry contains multiple phone numbers, press

Press -d to make a call.

⿠To make a videophone call, press +l( ) instead of d.

from the Stand-by display.

+Xo

+Bo

to select a desired phone number.

+Mo

▶

+Bo

; then you can

Page 43

Use Call Records to Make a Call

■

Press

Calls) from the Stand-by display.

Select a call record.

Press -d to make a call.

⿠To make a videophone call, press +l( ) instead of d.

Notifying the Other Party of Your

■

(Redial) or

+Vo

(Received

+Co

Phone Number

from the Stand-by display

▶

Set./Service▶NW services

▶

Caller ID notiﬁ cation

Select “Activate/Deactivate”.

Select “Activate”.

Make an International Call

■

You can use WORLD CALL when you want to make an international call from Japan.

⿠Contact “docomo Information Center” on the back page of this manual for inquiries about WORLD CALL. ⿠When using international carriers other than DOCOMO, contact them.

(for at least one second) from the

-0

󱽄

Stand-by display order of country/area codearea code (city code)destination phone number.

Press -d.

⿠Press +c( ) to make an international videophone call.

Select “Dial”.

⿠DOCOMO videophones conform to “3G-324M standardized by the international standard 3GPP”. You cannot connect to the videophone that uses a different format.

Enter numbers in

Connect

Page 44

Receiving a Call/Videophone Call

A call comes in.

The ring tone sounds and the Call/Charging indicator ﬂ ickers.

Press -d to answer the call.

When a videophone call comes in

You can receive the videophone call the same way as with a voice call. When you press +m( videophone call, the substitute image is sent to the other party.

Connect

Press +h to end the call.

) to answer the

When You can not Answer a Call

Public Mode (Drive Mode)

■

Once you activate Public mode (Drive mode), the guidance is played back telling that you cannot answer the call as you are currently driving or in a place where you should refrain from speaking on the phone. Then the call is disconnected.

From the Stand-by display, press and hold

for at least one

second.

“ ” appears on the Stand-by display.

To deactivate

Perform the same operation.

Adjusting Earpiece Volume

Press .< or .> during a call.

Press .</.> to adjust the earpiece

volume.

When a call comes in during Public mode (Drive mode), the ring tone does not sound and the record is stored in “Received calls”. The alarm does not sound even when the speciﬁ ed alarm time comes.

Page 45

Public Mode (Power Off)

■

Once you activate Public mode (Power off), the guidance is played back for an incoming call while the power is off, telling that you cannot answer the call as you are currently in a place where the power should be turned off (hospital, airplane, around priority seat in a train, etc.). Then the call is disconnected.

Enter

a+2+5+2+5+1

from the

Stand-by display.

Press -d.

To deactivate

1. Enter

2. Press -d.

+a+2+5+2+5+0

display.

from the Stand-by

Record Message

■

By activating Record Message, you can record a caller’s voice/video message when you cannot answer the call.

⿠When a call comes in, an answer message is played back after the ring time elapses. Then, the caller’s business is recorded with audio or video.

▶

from the Stand-by display

▶

Rec.msg/voice memo

▶

Record message setting

Select “ON”.

Select an answer message

▶

Enter a ring time (seconds).

From the Stand-by display, press .> to play back the latest record message, press and hold .> for at least one second to play back the latest videophone record message.

LifeKit

Connect

Page 46

Using Various Network Services

Network Services Available

■

The following are the DOCOMO network services available to the FOMA terminal.

The network services are not available when you are out of the service area or out of reach of radio waves.

⿠

For details, refer to “Mobile Phone User’s Guide [Network Services]”.

⿠

For subscriptions and inquiries, contact “docomo Information Center” on the back page of this manual.

⿠

Service Voice Mail Service Required Charged Call Waiting Service Required Charged Call Forwarding Service Required Free Nuisance Call Blocking Service Caller ID Notiﬁcation Service Caller ID Display Request Service Dual Network Service Required Charged

Connect

“OFFICEED” is a pay service that is available on a subscription basis.

⿠

For details, refer to the DOCOMO-enterprise-oriented website (in Japanese only). http://www.docomo.biz/html/product/ofﬁceed/ “Deactivate” does not mean that the contract for Voice Mail Service, Call Forwarding Service or other services is

⿠

canceled. When new network services are provided by DOCOMO, you can add them as menus.

⿠

The way the outline of respective networks is described in this volume is by the menus on the FOMA terminal.

⿠

Application Monthly fee

Not required Not required Not required

Free Free Free

Service English Guidance Multi Number Required Charged 2in1 Required Charged Public mode (Drive mode) Public mode (Power off) OFFICEED Required Charged Melody Call Required Charged

Application Monthly fee Not required

Not required Not required

Free

Free Free

Page 47

Voice Mail Service

■

from the Stand-by display

▶

Set./Service▶NW services

▶

Voice mail

Call Waiting Service

■

from the Stand-by display

▶

Set./Service▶NW services

▶

Call waiting

Activate the service

1. Select “Activate” ⿠You can also specify a ring time.

To play back the message

1. Select “Play messages”

or “Play (videophone)

2. Operate following the voice guidance.

▶

Select “YES”.

▶

Select “YES”.

Select “Play (voice call)”

Activate the service

1. Select “Activate”

Answer an Incoming Call during a Call

Press -d. Each time you press -d, you can switch the parties you can talk with.

Call Forwarding Service

■

from the Stand-by display

▶

Set./Service▶NW services

▶

Call forwarding

Activate the service

1. Select “Activate”

▶

Select “YES”. ⿠You can set the phone number of forwarding destination or ring time as well.

▶

Select “YES”.

▶

Select “Activate”

Connect

Page 48

Services Available for FOMA Terminal

Available services Phone number

Directory assistance service (Charges apply: guidance fee + call fee)

Listed phone numbers only are supported

※

Telegrams (Telegram charges apply) (No preﬁx) 115 Time check (Charges apply) (No preﬁx) 117 Weather forecast (Charges apply) City code of the

If you use “Call Forwarding Service” for the land-line phone and specify a mobile phone as the forwarding destination, callers

⿠

may hear ringback tone even when the mobile phone is busy, out of the service area, or the power is turned off depending on the settings of the land-line phone/mobile phone.

Connect

This FOMA terminal supports “Emergency Location Report”. When you make an emergency call such as at 110/118/119,

⿠

information about the place where you are dialing from (location information) is automatically notiﬁed to emergency-response agencies such as police stations. It might happen that your correct location is not detected by emergency-response agencies depending on the location you dial from or radio wave conditions. When your location information is notiﬁed, the name of emergency-response agency is displayed on the Stand-by display. When you do not notify your phone number such as by adding “184” by every call, your location information and phone number are not notiﬁed. However, when an emergencyresponse agency has judged that the location information and phone number should be detected because of emergency priority such as for protection of human life, they might be notiﬁed regardless of your setting. Areas and timing “Emergency Location Report” introduced vary depending on the preparation of respective emergency-response agencies. When you make a call at 110/119/118 from the FOMA terminal, tell an operator that you are calling from a mobile phone and

⿠

then precisely notify your phone number and your current location. Further, remain without moving while talking to prevent the call from being disconnected. Do not turn off the power immediately after the call, and make sure to place your phone standby for at least 10 minutes. You might not be connected to regional police/ﬁre station depending on the area where you are calling from. If this happens,

⿠

use public phones nearby or land-line phones.

(No preﬁx) 104

desired area +

177

Available services Phone number

Emergency calls to police (No preﬁx) 110 Emergency calls to ﬁre station and

ambulance Emergency calls for accidents at sea (No preﬁx) 118 Disaster messaging service

(Charges apply) Collect calls

(Charges apply: guidance fee + call fee)

(No preﬁx) 119

(No preﬁx) 171

(No preﬁx) 106

Page 49

Using Overseas

To make a call overseas, you can use International Roaming (WORLD WING).

WORLD WING

■

WORLD WING is a service that enables you, using local carrier’s network, to make calls or to communicate even in foreign countries.

This service is available within the service area of 3G

⿠

network and GSM/GPRS network. At the time of purchase, the FOMA terminal is set to

⿠

automatically switch networks in foreign countries. When a call comes in during international roaming, the

⿠

call is forwarded from Japan. The caller is charged a call fee to Japan and the receiver is charged a receiving fee. Refer to the following before you use your FOMA

⿠

terminal overseas:

“Mobile Phone User’s Guide [International Services]”

・

“Mobile Phone User’s Guide [Network Services]”

・

DOCOMO International Services website

・

PDF “

・

海外ご利用ガイド

installed in “My documents” in Data Box

For connectable countries, regions, and carriers, refer

⿠

to “Mobile Phone User’s Guide [International Services]” or the DOCOMO International Services website. A fee charged for overseas use (call fee, packet

⿠

communication fee) differs from that of in Japan.

(Guide for Overseas Use)” pre-

Available Services Overseas

■

Communication Service 3G GSM GPRS

Voice call Videophone call SMS i-mode i-mode mail i-Channel i-concier i-Widget Packet communication by connecting with a personal computer

○ ※

※ ※

※

○ ○ ○ ○ ーー ○ ○ ○

※

○ ー ○ ○ ー ○

※

※2※

○ ー ○ ○ ー ○ ○ ー ○

○ ー ○

: Available ー: Not available 1 In B Mode or Dual Mode of 2in1, you cannot make calls from

Number B. 2 You need to establish overseas usage settings. 3 You need to establish i-Channel settings. You are charged a

packet communication fee each time you receive i-Channel

messages (including the basic channel). 4 You need to establish overseas usage settings for i-concier. You

are charged a packet communication fee each time you receive

information. 5 You need to establish i-Widget roaming settings. When you show

an i-Widget display, multiple Widget Appli programs might start.

In that case, you are charged a packet communication fee for

each communication.

Connect

Page 50

Make a Call to Outside the Country

■

You Stay at (Including Japan)

(for at least one second) from the

-0

▶

Stand-by display

Enter numbers in order of country/area code→area code (city code)→destination phone number

Press -d to make a call.

⿠Press +c( ) to make an international videophone call.

Making a Call to a Person in the

■

Country You Stay at

Connect

Enter a destination phone number from

the Stand-by display.

Press -d to make a call.

⿠Press +c( ) to make an international videophone call.

Make a Call to a Person who is Staying

■

Overseas and Using WORLD WING

When you make a call to a person who is also internationally roaming, make the call the same way as to make international calls to Japan even if he/she is in the country you stay at.

Mail

Sending i-mode Mail

Once you subscribe to i-mode, you can exchange e-mail messages over the Internet. You can attach less than 2 Mbytes of up to 10 ﬁ les (photos, moving pictures, etc.) with body text added. For details on i-mode mail, refer to “Mobile Phone User’s Guide [i-mode] FOMA version”.

from the Stand-by display

▶

(

Enter each item.

Press +l( ).

Select “OK”.

)

Enter a destination (mail address). Enter a subject. Select a ﬁ le such as an image.

Enter text.

Page 51

Creating and Sending Deco-mail

You can compose a Deco-mail message by using a template.

from the Stand-by display

▶

Template▶Deco-mail

Highlight a template and press

(

Enter an address and subject.

Edit text.

⿠You can also press +d to display the palette, and edit decorations.

Press +l( ).

Select “OK”.

Creating and Sending Decome-Anime

Decome-Anime is an i-mode mail service that enables you to create expressive messages having Flash movies with messages and images. You can create them easily by using Decome-Anime templates.

from the Stand-by display

▶

Create new Decome-Anime

Enter an address and subject.

Select the text ﬁ eld▶Select “Phone”

▶

Highlight a template and press

(

Edit characters and images

▶

Press +l( ).

Select “OK”.

Connect

Page 52

Displaying Received i-mode Mail

Press +l from the Stand-by display

▶

Inbox

Select a folder.

Select an i-mode mail message.

Connect

Reply to i-mode Mail

You can reply to the i-mode mail message by pressing +l(

When you receive an i-mode mail message, “ Stand-by display.

) while displaying the message.

” appears on the

Check New Messages

■

You can check the i-mode Center for a new mail message or Message R/F.

Press and hold +l for at least one second from the Stand-by display.

When you receive an i-mode mail message or Message R/F, the following display appears.

Number of messages Select an item to show the display for selecting a

Auto-sort

You can use “Auto-sort” to sort received/sent i-mode mail messages into a folder such as “Business” or “Friend” which has been created in advance. <Example> Sorting an i-mode mail message into the

folder from an i-mode mail address stored in the Phonebook

1. Highlight a folder from Inbox Folder list and press (

2. Select “Address sort”.

3. Select “Look-up address”

4. Look up for Phonebook entries and select a target

i-mode mail address.

)▶Sort▶Auto-sort

▶

Select “Phonebook”.

message.

Page 53

Receiving Early Warning “ Area Mail”

You can receive information such as about earthquake alerts that are issued from the Japan Meteorological Agency as an Area Mail message. When an Area Mail message arrives, “ the ring tone for Area Mail sounds. The received content of some messages is automatically displayed. To erase the displayed content, press

Early Warning “Area Mail” Settings

1. l from the Stand-by display▶Area Mail settings

2. Select an item to be set ⿠You can also check “Check ring tone” for how your FOMA terminal works when you receive an Area Mail message.

+Oo

▶

Set each setting.

” lights and

Using SMS

You can send a text message to the phone number of the FOMA terminal at the other end.

Sending SMS

■

Press +l from the Stand-by display

▶

Compose SMS

Enter each item.

Enter a phone number.

Enter text.

Press +l( ).

Select “OK”.

Connect

Page 54

Displaying Received SMS Message

■

Press +l from the Stand-by display

▶

Inbox

Select a folder.

Phonebook

Storing Phonebook Entries

Press and hold

second.

for at least one

+Xo

Connect

Select an SMS message.

When you receive an SMS message, “ Stand-by display.

” appears on the

Select “Phone”.

The display for entering a name appears. Enter a name and proceed.

Enter each item.

Enter a name. Enter a reading.

Enter a phone number.

Enter a mail address.

Press +l( ).

Page 55

Storing Phonbook Entries from

■

Received Call Record

from the Stand-by display

+Co

Editing Phonebook Entries

from the Stand-by display

+Xo

󱽄

Search and select a Phonebook entry.

Highlight a received call record to be

stored to the Phonebook and press

(

phonebook”.

Select “Phone”▶Select “New”.

Enter each item.

Press +l( ).

)▶Select “Add to

(

󱽄

Select an item to be edited

󱽄

Edit the contents.

Press +l( ).

Select “YES”.

)

Deleting Phonebook Entries

from the Stand-by display

+Xo

󱽄

Search and select a Phonebook entry.

(

Select “This phonebook”.

Select “YES”.

)󱽄Select “Delete data”.

Connect

Page 56

i-mode/Full Browser

Accessing i-mode Sites

i-mode is a service that enables you, by using the display of the FOMA terminal supporting i-mode (i-mode phone), to use online services such as site access, Internet access, and i-mode mail.

⿠i-mode is a pay service that is available on a subscription basis. ⿠For details on i-mode, refer to “Mobile Phone User’s

Guide [i-mode] FOMA version”. ⿠You can display SSL/TLS i-mode and Full Browser.

SSL/TLS are the safer data communication systems

※

using authentication/encryption technology to protect your privacy.

Search

Press +i from the

Stand-by display.

You can access the iMenu. Repeat selecting items (links) to display the desired site.

⿠While you are online, “

Menu is available in English.

⿠

Select “English” from the display on the right.

※

-compatible pages via

” blinks.

Before Using i-mode

⿠Content of sites or websites is in general protected by copyrights law. You can use data such as text and images for your entertainment, which you download to your i-mode phone, but you cannot use them, part or whole of it as is, or modify them for the purpose of sale or redistribution, without approval from copyright holders. ⿠If you replace the UIM with another one or turn on the power with the UIM not inserted, you cannot display/ play back ﬁ les, such as still images/moving pictures/ melodies you download from sites, attached ﬁ les (still images/moving pictures/melodies and other ﬁ les) sent/received by mail, screen memos, and Messages R/F depending on the model. ⿠When the ﬁ le has been set for the Stand-by display or for speciﬁ ed ring tone, of which display or playback is restricted by the UIM, the settings return to default if you replace it with new one or turn the power on with the UIM not inserted.

Page 57

Displaying Websites Designed for PC

You can browse Internet websites designed for PCs using the Full Browser function.

⿠Note that you are charged a high communication fee for the massive data communication such as browsing Internet websites having many images or downloading data. For details on the packet communication fee, refer to “Mobile Phone User’s Guide [i-mode] FOMA version”. ⿠You can browse Internet websites composed of frames. You can select a frame to display it as well.

from the Stand-by display

▶

i-mode▶Full Browser Home

⿠You might not correctly display some Internet websites.

Viewing and Operating Sites

Operations on site viewing display

Scroll display/Move highlighted/

Move the pointer

Select an item (link):

Return to previous page: +m(

Forward to next page:

Sound volume adjustment:

(for at least one second)

Operate by the Pointer

Using the pointer which appears on the display, you can scroll displays, select content, etc.

⿠You can use “Pointer/scroll” on “i-mode settings” to select whether to show the pointers for respective window, and how fast to have it moved. ⿠Some Internet websites might not be operated by the pointer.

:+Mo

(

+Oo

+c

“ ” appears while accessing via Full Browser.

)

(

)

Pointer

Page 58

Switch from i-mode to Full Browser

■

You can switch to Full Browser to show the Internet websites incorrectly displayed by i-mode.

⿠With Full Browser, note that the billing system differs from that of i-mode.

(

displayed via i-mode

▶

Switch to FB

Select “YES”.

To switch from Full Browser to i-mode

1. +i( Full Browser

▶

i-modeBRWSR Switch

) while the website is

▶

Full Browser

) while the website is displayed via

▶

i-mode Browser

Saving Websites or Sites for Quick

■

Access

Bookmark websites or i-mode sites you frequently visit to get easy access to them.

(

▶

Bookmark▶Add bookmark

Select “YES”

▶

Select a destination folder.

To access a site stored in Bookmark

1. +m

2. Select a folder▶Select a bookmark.

Saving Site Content

■

If you save the page once you visited as a screen memo, you can easily refer to it without connecting to i-mode.

(

▶

Screen memo▶Save screen memo

Select “Phone”▶Select “YES”

▶

Select a destination folder.

To display a saved screen memo

1. +m from the Stand-by display

▶

Screen memo

2. Select “i-mode Browser” or “Full Browser”.

3. Select a folder

) while the site is displayed

from the Stand-by display▶i-mode▶Bookmark

) while the site is displayed

▶

i-mode

▶

Select a screen memo.

Page 59

i-Channel

This service distributes information such as news and weather forecast to i-Channel mobile phones. The automatically received latest information ﬂ ows on the Stand-by display by tickers. You can read it on the i-Channel list by pressing the i-Channel key. Further, two types of channels, “Basic channel” provided by DOCOMO and “Favorite channel” provided by IPs (Information Providers) are available. You are not charged a packet communication fee for auto-updates of “Basic channel” information. You are charged a packet communication fee for autoupdates of “Favorite channel” information that will be available by registering your favorite channels. Note that you are separately charged a packet communication fee for browsing detailed information for both “Basic channel” and “Favorite channel”. When you use the international roaming service, you are charged a packet communication fee for both auto-update and browsing detailed information.

⿠i-Channel is a pay service which is available on a subscription basis (You need to subscribe to i-mode to apply for i-Channel). ⿠For details on i-Channel, refer to “Mobile Phone User’s Guide [i-mode] FOMA version”. ⿠The i-Channel service is provided in Japanese only.

Accessing i-Channel

■

Press

from the Stand-by display.

+Zo

Ticker

Select each channel to browse its detailed information.

Page 60

Map/ GPS

Map/GPS Function

⿠GPS is operated by the United States Department of Defense, so the GPS radio wave conditions might be controlled (accuracy deterioration, radio wave supply suspension, etc.) depending on the defense strategy of the United States Department of Defense. ⿠Note that we do not take any responsibility for a loss such as pure economic loss resulting from the facts that you have missed the chance to check the positioned (communication) results, which have been caused by external factors such as malfunctions, erroneous operations, troubles, or power failure (including battery shortage) on the FOMA terminal. ⿠You cannot use the FOMA terminal as a navigating system for aircraft, vehicles, and people. Therefore,

note that we are not held responsible for any damage resulting from the use of the location information for navigation. ⿠You cannot use GPS as a high-accuracy positioning device. Note that we do not take any responsibility for the damage caused by an error in the location information. ⿠You cannot use the GPS function when the FOMA terminal is out of the service area (or overseas).

Checking Your Location

You can position your current location and display location information. You can send your location information by mail and display a map as well.

from the Stand-by display

▶

LifeKit▶Map/GPS▶Position location

The current location is positioned and displayed by the latitude and longitude.

⿠While positioning, “

To display the map of the current location

1. +i( display

⿠GPS compatible i-αppli starts and shows the map.

Using “

“



enables you to show the map of your current or speciﬁ ed location, check area information, or navigate you to your destination by using location information. You can search for information about useful facilities at a time of disaster. You can make full use of the AUTO-GPS function to receive valuable information about where you are currently around.

⿠You are separately charged a packet communication fee. You are advised to subscribe to i-mode packet ﬂ atrate service for using this software program.

(Map Application)” is a useful i-αppli program that

(for at least one second) from the

) from the Position Location Result

▶

Read map



Stand-by display Application)

” blinks at the top of the display.

( Map Application)”

▶

地図アプリ

(Map

Page 61

Using AUTO-GPS

Your current location is automatically positioned, and by sending your location information to your GPS service provider, you are enabled to receive a variety of services according to your location, such as weather forecast, shopping guide, or sightseeing information around.

⿠To use a service that supports the AUTO-GPS function, use the AUTO-GPS function compatible i-αppli to establish the AUTO-GPS service information for respective services. ⿠The AUTO-GPS function enables you to automatically position your current location according to your movements, and to send your location information to your service provider. (Your location is positioned once every 5 minutes according to your movements. ⿠When you start to use the AUTO-GPS function, check GPS service providers or the DOCOMO website for how you can use services. It might happen that you will be charged a fee for using them. ⿠You might separately be charged a packet communication fee for sending your location information.

)

AUTO-GPS Setting

■

You can set whether to use AUTO-GPS function. (“ON” is set at purchase.)

▶

from the Stand-by display

▶

Map/GPS▶AUTO-GPS

▶

AUTO-GPS setting

Select “ON” or “OFF”.

DOCOMO Service Setting

■

Select whether you use the AUTO-GPS service that syncs with i-concier or respective services provided by DOCOMO.

⿠Set the service to “ON” to automatically and periodically send your location information from the FOMA terminal to DOCOMO. ⿠To use i-concier or respective services, you need to separately subscribe for and establish the settings.

from the Stand-by display

▶

Map/GPS▶AUTO-GPS

▶

DOCOMO service setting

LifeKit

▶

LifeKit

Select “ON” or “OFF”.

Page 62

Camera

Viewing and Operating Finder Display

Photo mode

: intelligent Auto

: Normal

⿠You can also use “Scene” that selects a mode suitable for the scenery around.

Camera mode

: Still image shooting (photo) mode

: Movie shooting (movie) mode

/ / : Continuous mode

Store in

: Phone (Camera)

: Phone (Automatic backup)

: microSD

Number of recordable image

Shows the number of remaining recordable still images.

Enjoy

Operations for shooting

Icon menu operation: +l ( Photo mode: +l(for at least one second) Zoom:

) Shutter/Save:

+Vo

Change camera-mode: +c Focus function (when the outside camera is used): Switch between inside camera and outside camera: Flash setting/Photo light set. (when the outside camera is used):

Flash setting

: Auto : Forced ON

: Always light ON : Forced OFF

Photo light set.

: ON : OFF

Key guidance

The key operation guide is displayed.

Top icon

Shows the vertical direction for shooting.

Focus frame

When a subject is focused on, the frame becomes green.

Zoom bar

The zooming status is displayed.

Icon menu

You can check and set each setting of camera.

+Oo

(TELE)/

+Co

(WIDE)

+Xo

Page 63

Shooting Still Images/Moving Pictures

Shoot Still Images

■

Press +c from the Stand-by display.

Press

Shoot moving pictures

■

from the Stand-by display

▶

Start recording by pressing

(

+Oo

pressing

Press

⿠Do not leave the FOMA terminal with the lens pointing to direct sunlight. Pixels may be discolored or burns may result. ⿠When the battery level is low, you may not be able to save still images/moving pictures you shoot.

( ).

+Oo

( ).

+Oo

(

)

)▶End the recording by

+Oo

(

( ).

Viewing Still Images/Moving Pictures After Shooting

The still image you shot is saved to the “My picture” in Data Box. The shot moving picture is saved to the “imotion/Movie” in Data Box. The still image/moving picture can be set for the Stand-by display or other displays.

from the Stand-by display

▶

Data box

▶

My picture or imotion/Movie

Select the “Camera” folder

▶

Select still image or a moving

picture.

Folder Jump Function

When you press +m( ) in the ﬁ nder display for shooting still images, the inside of the destination folder is shown. You can view the still image immediately after you shot.

Enjoy

Page 64

1Seg

■Using 1Seg 1Seg is a service provided by television entrepreneurs (broadcasting stations). You are not charged a communication fee for receiving audio and video. For about fee charged by NHK, contact NHK.

You are charged a packet communication fee for browsing “Data broadcasting site” and “i-mode site”. You might be



charged an information fee for using some sites (i-mode pay sites). For details on the 1Seg service, browse the following websites:



The Association for Promotion of Digital Broadcasting From personal computer: http://www.dpa.or.jp/english/ From i-mode: http://www.dpa.or.jp/1seg/k/ (In Japanese only) 1Seg is not available overseas.



■Radio waves 1Seg is one of the broadcasting services receiving radio waves (broadcasting waves) different from that used for the FOMA services. You might not be able to correctly receive 1Seg broadcast in places as follows:

⿠Places far away from radio towers that transmit broadcasting waves ⿠Mountain-ringed regions or behind buildings ⿠In tunnels, underground, or recesses of buildings The reception conditions might be improved by changing the direction of the antenna, by moving your FOMA terminal



away from or close to you, or by moving yourself to another place.

■1Seg antenna When you watch a 1Seg program, fully extend the 1Seg antenna.

⿠When you change the direction of the 1Seg antenna, do not apply an extra force.

■Battery level If you try to start 1Seg when the battery is low, the battery alert tone sounds, and a conﬁ rmation display appears asking

Enjoy

whether to start it. In addition, when the battery level becomes low while you are watching or recording a 1Seg program, the battery alert tone sounds.

⿠When you do nothing on the conﬁ rmation display for about one minute, 1Seg automatically terminates.

■Messages on the display when you use 1Seg for the ﬁ rst time When you use 1Seg for the ﬁ rst time after purchase, the Exemption Clause Conﬁ rmation display appears. If you select “NO” on a conﬁ rmation display which appears after pressing display does not appear afterward.

+Oo

(

), the same conﬁ rmation

Page 65

Setting Channels

When you activate 1Seg for the ﬁ rst time or change the area you are in, you need to operate “Channel setting”. Select “Auto channel setting” to enable you to search automatically for broadcast stations you can watch.

⿠You need to set this function with the 1Seg antenna extended.

▶

from the Stand-by display

▶

Channel setting

▶

Auto channel setting

Select “YES”.

1Seg

Watching 1Seg

Press and hold +c for at least one second from the Stand-by display.

1Seg starts and the viewer display appears.

Select “YES”▶Enter a title.

To execute Channel Setting by selecting an area

1. +m from the Stand-by display

▶

Channel setting▶Select area

2. Select an area

3. Select “YES”.

▶

Select a prefecture.

▶

1Seg

When you switch to Horizontal Open Style, you can watch a 1Seg program on the horizontal display. When you close the FOMA terminal, the viewer display appears on the Private window.

Enjoy

Page 66

Viewing and Operating Viewer Display

Displayed while you are watching a 1Seg program

Video

Caption

Data Broadcasting

Operation Mode

: Video Mode

: Data Broadcasting Mode

The operation on the viewer display

Channel selection:

Enjoy

Sound volume adjustment: Video recording:

⿠The recorded video is saved on the microSD card. Switch TV/data BC: +m( Switch display directions:

or .</.>(for at least one second)

+No

(

+Oo

(for at least one second)

Channel (Remote-control number)

or .</

+Bo

)(for at least one second) or

)

Program Information (outline)

Video being recorded

Switch Display/ Caption

Sound Volume

Displayed while receiving caption information

Airwave Reception Level (estimate)

Setting Timer for Watching or Recording 1Seg Programs

Set the date and time, a channel, and program name, and enter them to the TV Timer List or Timer Recording List. When the set time arrives, watching or recording starts.

▶

from the Stand-by display

Select “TV timer list” or “Timer

1Seg

recording list”.

Press +l( ).

Enter each item.

Press -l( ).

Playing Recorded Video

from the Stand-by display

▶

Data box▶1Seg

Select “Video”▶Select a ﬁ le.

Page 67

Music

Music&Video Channel

Music&Video Channel is a service which automatically delivers up to about one-hour programs at night just by selecting your favorite music programs in advance. Further, you can enjoy high-quality video program of up to about 30 minutes. Programs are updated periodically and you can enjoy the delivered programs at any time such as on commuting.

■Before using Music&Video Channel ⿠Music&Video Channel is a pay service that is available on a subscription basis. (To apply for Music&Video Channel, you need to subscribe to i-mode and i-mode packet ﬂ at-rate service.) ⿠Other than the service fee for using Music&Video Channel, you might be separately charged an information fee depending on the program. ⿠If you insert the UIM to the Music&Video Channel incompatible FOMA terminal after you subscribe to Music&Video Channel, you cannot use Music&Video Channel Service. Note that the service fee applies unless you cancel the Music&Video Channel subscription. ⿠You cannot set or download programs during international roaming. distribution of programs before going abroad. Then, after homecoming, resume the reception of distribution.

When you try to set or download programs during



international roaming, note that you are charged a packet

communication fee for i-mode communication. ⿠For the details on Music&Video Channel, refer to “Mobile Phone User’s Guide [i-mode] FOMA version”.



Take procedures to halt the

Setting/Playing Programs

Setting Programs

■

from the Stand-by display

▶

Music&Video Channel▶Set program

Follow the instructions on the display

to set a program.

The program automatically downloads at night.

Playing Program

■

from the Stand-by display

▶

Music&Video Channel

Select a program.

Operation while playing back a Music&Video Channel program

Halt:

Pause:

Sound volume adjustment:

Search (fast forward):

Press and hold

Search (fast rewind):

Press and hold

+l

+Oo

(

)

(

)

+Bo

+Vo

+Co

▶

MUSIC

▶

MUSIC

Enjoy

Page 68

Downloading Music Files from Sites

You can download Chaku-uta Full® music ﬁ les from sites.

Select a Chaku-uta Full® music ﬁ le at a

downloadable site.

Select “Save”▶Select “YES”.

Playing Music Files

MUSIC Player enables you to play Chaku-uta Full® music ﬁ les you downloaded from sites, or to use your personal computer to play music ﬁ les saved on the microSD card.

▶

from the Stand-by display

▶

MUSIC Player

Select “All tracks”▶Select a music ﬁ le.

MUSIC

Select a destination folder.

⿠Chaku-uta Full” is a registered trademark of Sony Music Entertainment Inc.

Enjoy

Handling Music Files

You can use music ﬁ les saved on the microSD card for personal use only. Before using, give enough consideration not to infringe on the third party’s intellectual property rights or other rights such as copyright.

Jacket image

Title

Artist name Playback time

Operations of MUSIC Player display

Halt: +l(

Sound volume adjustment:

Replay previous ﬁ le or go back to the beginning of the ﬁ le:

Search (fast forward): Press and hold

Search (fast rewind): Press and hold

) Pause:

Replay next ﬁ le:

+Bo

+Vo

+Co

Sound volume

( )

+Oo

+Vo

Page 69

i-αppli

i-αppli/ i-Widget

Starting i-αppli

■

Press and hold +i for at least one

second from the Stand-by display.

■i-αppli

“i-αppli” is a software program for i-mode mobile phones. By downloading you can use your FOMA terminal more conveniently. You can automatically update the stock price information or weather information, and enjoy games without accessing network.

You are separately charged a packet communication fee.



⿠The packet communication fee for overseas use differs from the one for domestic use. ⿠For details on i-αppli, refer to “Mobile Phone User’s Guide [i-mode] FOMA version”.

■i-Widget

Your press of the single i-Widget key (-r) enables you to access the frequently used content such as calculator, clock, and stock price information (Widget Appli). You can add Widget Appli programs by downloading from sites provided by IPs (Information Providers).

⿠Multiple Widget Appli programs might communicate when you open the i-Widget display. ⿠You are separately charged a packet communication fee for downloading Widget Appli programs or opening the i-Widget display. ⿠As for overseas use, you are charged a packet communication fee each time a Widget Appli program communicates. ⿠For details on i-Widget, refer to “Mobile Phone User’s Guide [i-mode] FOMA version”.



various software programs from the i-mode site,

Select a software

program.

Using i-Widget

■

from the Stand-by display.

i-Widget that can simultaneously start multiple Widget Appli programs opens.

Select a Widget Appli

program.

You can operate Widget Appli program separately.

Widget Appli

Enjoy

Page 70

⿠You can delete the pre-installed i-αppli programs except for the “ Dictionary)”. You can re-download deleted programs

from the “P-SQUARE” site. You can download not only i-αppli programs but also the pre-installed Chara-den images, Machi-chara images, Kisekae Tool ﬁ les, templates, dictionaries, and Deco-mail pictograms from the “P-SQUARE” site (in Japanese only).

メーカー

⿠Deadlines for re-download services

“

機動戦士ガンダムオンライン

・

GUNDAM ONLINE)”: the end of October, 2013

“

レイトン教授と悪魔の箱

・

Pandora’s Box)”: the end of October, 2013

“

レッツタップ

・

“

ぷよぷよ～ん＆コラムス

・

the end of October, 2013

“

旺文社漢検アプリforP

・

Application for P)”: the end of October, 2013

⿠Deadlines for downloading i-αppli additional data

“

機動戦士ガンダムオンライン

・

Enjoy

GUNDAM ONLINE)”: the end of October, 2013 (The online match is the service of up to the end of October, 2010.)

“

レイトン教授と悪魔の箱

・

Pandora’s Box)”: the end of October, 2013 ⿠The services such as re-downloading and downloading i-αppli additional data might be halted or closed without notice even in the service period.

ケータイTOOL＜辞書＞

メニューリスト

→

(Mobile Phone Maker)→P-SQUARE

(Let’s TAP)”: the end of October, 2013

(Menu List)

(MOBILE SUIT

(Professor Layton and

(PuyoPuyon & COLUMNS)”:

(Obunsha Kanji Test

(MOBILE SUIT

(Professor Layton and

(KEITAI TOOL

accessing the site

ケータイ電話

→

QR code for

i-motion/ Movie

Playing i-motion/Movie

i-motion is a ﬁ le consisting from video, audio, and music which you can download to your FOMA terminal from i-motion sites that support i-motion. You can also set it for a ring tone. Also, by using high speed communication, you can play back smooth and high-quality movie ﬁ les provided by portal sites, movie specialty sites and other sites on the Internet.

from the Stand-by display

▶

Data box

Select a folder

▶

Select a i-motion ﬁ le or a movie ﬁ le.

▶

motion/Movie

Page 71

Osaifu-Keitai

Osaifu-Keitai/ ToruCa

As Osaifu-Keitai comes with the IC card, you can make a payment just by placing the FOMA terminal over a scanning device in shops. Further, you can use communications to deposit electronic money or to check your account for balance or usage histories. Security of the card is well established so that you can use it carefree. ToruCa is an electronic card that you can receive with Osaifu-Keitai for use as ﬂ iers, restaurant cards, and coupon tickets. You can download ToruCa ﬁ les from scanning devices, sites, or data broadcasting, and can easily exchange them with your friends using mail, infrared communication, iC communication, or a microSD card. The downloaded ToruCa ﬁ les are saved to “ToruCa” on “Osaifu-Keitai”. For details on Osaifu-Keitai and ToruCa, refer to “Mobile Phone User’s Guide [i-mode] FOMA version”.

⿠Data on the IC card (including electronic money, reward points, etc.) might be lost or deformed owing to the malfunction of the FOMA terminal. (When you have your FOMA terminal deposited at our hand for repair, we would refrain from keeping it with data saved on as is. You are asked, as a rule, to delete data beforehand yourself.) To support data reissue, restoration, temporal storage, and transfer except transfer by the iC transfer service, consult your service provider that supports Osaifu-Keitai. For your important data, be sure to use the service with backup support. ⿠In any case including malfunction or model change, we cannot be held responsible for the loss or deformation of data on the IC card or other losses caused regarding Osaifu-Keitai compatible services. ⿠When you were stolen of or lost your FOMA terminal, immediately inquire of your Osaifu-Keitai supporting service provider into countermeasures.

Place the f mark of the FOMA

terminal over a scanning device to use the target service.

The Call/Charging indicator lights when you bring your FOMA terminal close to the scanning device and communication becomes ready.

Place the f mark of the FOMA terminal over the scanning device.

More Convenient

Page 72

i-concier

“i-concier” works to serve you with a pleasant life just like a clerk or concierge does. The service holds your data (area information about your neighborhood, Schedule, ToruCa, Phonebook, etc.) and sends you information, with good timing, about a variety of things according to your living area, your current location, or your preference or interest. Also this service automatically updates schedule events or ToruCa ﬁ les to the latest ones, and automatically adds useful information such as about the opening period of various shops to your Phonebook. i-concier information is notiﬁ ed by a Machi-chara image (cartoon character that appears on the Stand-by display).

⿠i-concier is a pay service which is available on a subscription basis (You need to subscribe to i-mode to apply for i-concier). ⿠If you have not subscribed to Data Security Service but will newly subscribe to i-concier, you are to subscribe to Data Security Service as well as i-concier. ⿠Depending on the content (information, i-schedule, and others), you might be separately charged an information fee other than the i-concier monthly fee. ⿠You are charged a packet communication fee separately for receiving information except some. ⿠You are separately charged a packet communication fee for using detailed information. ⿠When you use the international roaming service, you are charged a packet communication fee for both receiving information and browsing detailed information. The packet communication fee for overseas use differs from the one for domestic use. ⿠When you use i-concier overseas, you need to make overseas usage settings.

More Convenient

⿠You are separately charged a packet communication fee for auto-updates of i-schedule, ToruCa, and Phonebook. ⿠For details on i-concier, refer to “Mobile Phone User’s Guide [i-mode] FOMA version”.

Page 73

Receive Information

■

When information arrives,

“

” blinks and the content is displayed on the Stand-by display.

Select a message.

Convenient Tools

Using Schedule

from the Stand-by

▶

display

▶

Schedule

Select a date to show a schedule event of the selected date. Select the schedule event to conﬁ rm its details.

Stationery

More Convenient

Displaying i-concier Screen

■

from the Stand-by display

▶

i-concier

Select a piece of

information.

(

You can store a new schedule event.

Enter each item.

Press -l( ).

)▶Select “New”.

Page 74

Using Alarm

Using Bar Code Reader

More Convenient

from the Stand-by display

▶

Stationery▶Alarm

Highlight an alarm and press

(

Enter each item.

Press -l( ).

⿠The alarm does not sound in Public mode (Drive mode), Lock All, Personal Data Lock, or Omakase Lock.

You can use the outside camera to scan QR codes and others, and store them as ﬁ les. From the scanned data, you can make calls, compose i-mode mail messages, access Internet websites, and so on.

When scanning with Bar Code Reader

⿠Scan the code as large as possible within the guide frame. ⿠Autofocus works when you scan the code about 10 cm or more away from it. When you scan the code in the outof-focus state, the recognition rate lowers. ⿠Scan so that the camera is in parallel with the code.

 QR Code

QR Code is one of the 2-dimensional codes that denotes data in the vertical and horizontal directions.

⿠“

株式会社

INC.)” is displayed when you scan the QR code with the FOMA terminal.

NTT

(NTT DOCOMO,

ドコモ

Guide frame

Page 75

Scan a Code

■

<Example> Access P-SQUARE by using

QR code on the right

from the Stand-by display

▶

Bar code reader

Select “Scan code”.

Fit a code to the guide frame and

press

The subject is focused on by autofocus function.

Press

A URL is displayed as a scanned result.

Select the URL

▶

Select “i-mode Browser”

▶

Select “YES”.

+Xo

( ) to scan the code.

+Oo

QR code for

accessing the site

▶

LifeKit

Using Pedometer

As you walk with your FOMA terminal in hand or in your pocket, your pace is measured, and then depending on the measured results, your distance, calories consumed, and body fat burned are displayed.

Caution when using Pedometer

⿠If you have not yet set Set Time, you cannot use this function. ⿠When you use Carry Case L 01 (option) to house it, fasten it to your waist belt. ⿠When you put Pedometer into your bag, store it in a pocket or partition that holds it securely.

About measurement

⿠Note that measurement results are just for reference. ⿠When the power is not turned on or while software is being updated, no measurement is carried out. ⿠Your pace might not be correctly measured depending on the usage conditions.

from the Stand-by display

▶

LifeKit▶Pedometer

The measurement records of your pace are displayed.

⿠You can press +i( OFF of Pedometer, or start user information.

) to switch between ON/

More Convenient

Page 76

Data Management

Using microSD Card

If you do not have a microSD card, you have to purchase it.

⿠P-01B supports a commercial microSD card of up to 2 Gbytes and microSDHC card of up to 16 Gbytes (As of October 2009). ⿠Make sure that you turn off the power, and then insert/remove the microSD card.

Inserting microSD Card

■

With the metal terminal surface facing

downward, make sure that the cut edge is positioned at right and then insert.

⿠Push it until it clicks.

When you remove the microSD card

Push the microSD card until it stops and remove it.

More Convenient

The inserting slot of the microSD card is in the inside of the back cover. To insert, ﬁ rst remove the back cover

and battery pack.

⿠Note that the microSD card may pop out when you insert or remove it.

Page 77

Icons on the Display

: A microSD card is inserted. : Data is being read/written.

(Do not remove the microSD card nor turn off the FOMA terminal.)

: The microSD card is write-protected.

: The microSD card cannot be used.

(Insert the microSD card again. If “ displayed, execute “Check microSD” or “microSD format”.)

” is still

Formatting microSD Card

■

When you use the microSD card for the ﬁ rst time, you need to format (initialize) it.

⿠Be sure to use P-01B for formatting. The microSD card formatted using other devices such as personal computers may not work properly. ⿠Note that formatting deletes all content on the microSD card.

▶

from the Stand-by display

▶

microSD▶Refer microSD data

▶

(

Enter your Terminal Security Code

▶

Select “YES”.

)▶microSD format

LifeKit

More Convenient

Page 78

Back up Data to the microSD Card

■

You can back up Phonebook entries, schedule events, ToDo items, messages, text memos, and bookmarks, and the settings on and information about your FOMA terminal collectively onto the microSD card. When restoring the backup data onto your FOMA terminal, they are collectively restored.

⿠Backing up data from the FOMA terminal onto the microSD card is collectively applied to all data, so data not created in the FOMA terminal is also backed up on the microSD card. When you restore such data onto your FOMA terminal, either data that was vacant on the microSD memory card at the time of backup write over data in the FOMA terminal or even data created later in the FOMA terminal is written over.

from the Stand-by display

▶

microSD▶Backup/Restore

▶

More Convenient

Backup to microSD

Enter your Terminal Security Code

▶

Select “YES”.

To restore backup data to FOMA terminal

1. +m from the Stand-by display

▶

Backup/Restore▶Restore to phone

2. Enter your Terminal Security Code

▶

LifeKit▶microSD

▶

LifeKit

▶

Select “YES”.

Copying Data to the microSD card

■

<Example> Copying a still image

from the Stand-by display

▶

Data box▶My picture

▶

Select a folder.

Highlight a still image to be copied and

press +i( microSD”

When you copy data from the microSD card to the FOMA terminal

1. +m from the Stand-by display

▶

My picture

2. Highlight a still image to be copied and press +i(

▶

Select “Copy this”.

Displaying Data stored on the microSD

■

▶

)▶Select “Copy to

Select “Copy this”.

▶

Data box

(

)▶Select “Copy to phone”

)▶Select a folder.

card

<Example> Displaying still image

from the Stand-by display

▶

Data box▶My picture

Select a folder▶Select an image.

▶

(

)

Page 79

Bluetooth Function

You can connect your FOMA terminal to a Bluetooth device such as Wireless Earphone Set 02 (option), and can talk on the phone or play music ﬁ les.

■

FOMA Terminal

You can search and register a Bluetooth device to the FOMA terminal. You need to place the Bluetooth device to be registered standby for registration beforehand. <Example> Register Wireless Earphone Set 02 and

connect using the Hands-free service

▶

from the Stand-by display

▶

Bluetooth▶Register New Devices

Select “OK”.

Select Wireless Earphone Set 02

▶

Select “YES”.

⿠When you register a Bluetooth device other than Wireless Earphone Set 02, you need to enter “Bluetooth passkey”.

Select “Hands-free”.

Select “Headset” or “Hands-free” for talking, and select “Audio streaming” for playing music.

LifeKit

Connect the Bluetooth Device

■

from the Stand-by display

▶

Bluetooth▶Device list

Select a Bluetooth device

▶

Select a service to connect to.

▶

LifeKit

More Convenient

Page 80

Sending/Receiving Data by Infrared Communication

The FOMA terminal conforms to IrMC™ version 1.1 standard. You can send or receive data such as Phonebook entries to or from a device supporting the infrared communication function. However, you cannot exchange data depending on the other party’s device.

⿠First set at the receiving end and begin sending data from the sending end within 30 seconds.

Send Data

■

Function menu of the data to be sent

▶

Send Ir data

⿠Procedure for sending data might differ depending on the data.

Select “YES”.

Receive Data

■

from the Stand-by display

▶

Receive Ir data▶Receive

▶

LifeKit

More Convenient

Infrared data port

Within about 20cm

Within ±15° from the center

Select “YES”.

Page 81

Sending/Receiving Data by iC Communication

iC communication is a function that enables you to send/receive data such as Phonebook entries to/ from another FOMA terminal using the FeliCa reader/ writer function. However, you cannot exchange data depending on the other party’s FOMA terminal.

Send Data

■

Function menu of the data to be sent

▶

transmission

⿠Procedure for sending data might differ depending on the data.

Select “YES”.

Face one another’s marks f.

Receive Data

■

Face the f mark of the FOMA

terminal of the receiving end while the Stand-by display is shown to that of the FOMA terminal of the sending end.

Select “YES”.

More Convenient

Page 82

Support

Troubleshooting

⿠First of all, check to see if you need to update the software program and then update it if necessary. See page 84 for how to update software programs. ⿠When symptom persists even after you check the countermeasures for the problem you suffer, feel free to contact the “Repairs” counter listed on the back page of this manual or a repair counter speciﬁ ed by DOCOMO.

Power source

The FOMA terminal does not turn on.

Make sure the battery pack is attached to the FOMA terminal

…

correctly. (See page 18) Make sure the battery is fully charged. (See page 19)

…

Others

Charging

Cannot charge. (The Charging indicator does not light, or it ﬂ ickers.)

Make sure the battery pack is attached to the FOMA terminal

…

correctly. (See page 18) Make sure the power plug of the adapter is securely inserted into

…

the outlet or cigarette lighter socket. Make sure the adapter and the FOMA terminal are connected

…

correctly. (See page 19) When you use an AC adapter (option), make sure its connector

…

is ﬁ rmly connected to the FOMA terminal or the desktop holder (option). (See page 19) When you use the desktop holder, make sure the connector

…

terminal of the FOMA terminal is not stained. If it is stained, wipe the terminal part with a dry cotton swab, etc. If you talk on the phone, have communications, or operate other

…

functions for a long time during battery charge, the temperature of the FOMA terminal may rise to ﬂ icker the Call/Charging indicator. In that case, charge the battery after the FOMA terminal cools down. (See page 19)

Operation of terminal

While you operate the FOMA terminal or charge the battery, they get hot.

While operating or charging, or when you talk on the videophone,

…

operate i-αppli programs, or watch 1Seg programs for a long time during battery charge, the FOMA terminal, battery pack, or adapter may become warm, but this is not a safety hazard, so you can continue to use them.

Page 83

The usable time of the battery is short.

Make sure not to leave the FOMA terminal out-of-service-area for

…

a long time. If your FOMA terminal is left out-of-service area, it searches for radio waves to establish communications, consuming more power. The usable time of the battery pack varies depending on the

…

usage environment or its remaining life. Battery packs are consumables. The usable time slightly shortens

…

each time you charge the battery. If the usable time becomes extremely short as compared with the default state even if fully charged, purchase the speciﬁ ed battery pack.

The power of the FOMA terminal shuts down and restarts.

If the terminal of the battery pack is stained, the connection might

…

deteriorate to shut down the power. Wipe the battery terminal with a dry cotton swab, etc.

Pressing keys is disabled.

Make sure Lock All is deactivated.

…

Make sure Key Lock is deactivated.

…

Make sure Side Keys Guard is set to “OFF”.

…

Make sure the Touchpad is off. (See page 28)

…

The UIM is not recognized.

Make sure you insert the UIM in the correct direction. (See page 18)

…

Call

Cannot make a call by pressing numeric keys.

Make sure Keypad Dial Lock is deactivated.

…

Make sure Restrict Dialing is deactivated.

…

Make sure Lock All is deactivated.

…

Make sure Self Mode is deactivated.

…

Cannot talk. (“

” does not disappear even if you move to another place. You cannot make or receive a call, though the radio wave conditions are not bad.)

Turn off and on the FOMA terminal, or remove and attach/insert

…

the battery pack or UIM. (See page 18, page 20) Depending on the radio wave property, you may not be able to

…

make or receive a call even if the FOMA terminal is “within service area” or “ another place and redial. Make sure the call restrictions such as Call Rejection, Call

…

Acceptance, etc. are deactivated. Depending on the radio wave congestion state, calls and mail

…

messages may be congested and hard to be connected in crowded places. In that case, the message “Please wait” or “Please wait for a while” is displayed and a busy tone sounds. Move to another place or wait for a while, and then redial.

Osaifu-Keitai

Cannot use Osaifu-Keitai function.

If you remove the battery pack or activate Omakase Lock, the IC

…

card function becomes unavailable regardless of the setting of IC Card Lock. (See page 18, page 38) Make sure IC Card Lock is deactivated.

…

Make sure you place the f mark on the FOMA terminal over

…

the scanning device. (See page 69)

” is displayed for a radio wave condition. Move to

Others

Page 84

Warranty and After-Sales Service

Warranty

■

Make sure that you have received a warranty card provided at purchase.

⿠

After checking the contents of the warranty card as well as “Shop name and date of purchase”, keep the warranty card in a safe place. If you notice that necessary items of the warranty card are not ﬁlled in, immediately contact the shop where you purchased the FOMA terminal from. The term of the warranty is one year from the date of purchase. All or part of this product including the accessories may be modiﬁed

⿠

for improvement without notice.

After-sales services

■

When there is a problem with the FOMA terminal



Before asking repairs, check “Troubleshooting” in this manual or in “

使いかたナビ

たナビ

remains unsolved, contact the “Repairs” counter listed on the back page of this manual for malfunction and consult them.

When repairs are necessitated as a result of consultation:



Bring your FOMA terminal to a repair counter speciﬁed by DOCOMO. Note that your FOMA terminal is accepted for repair during the repair counter’s business hours. Further, note that you may need to wait for ﬁxing depending on the malfunction state.

In warranty period



Your FOMA terminal is repaired charge free in accordance with

・

the terms of warranty.

Make sure that you bring the warranty card to the counter for

・

repair. If you do not show the warranty card, or when troubles or

Others

malfunctions are regarded to be caused by your mishandling (the damages of liquid crystal display, connector, etc.), the repair cost is charged even within the warranty period.

The cost for troubles caused by the use of devices and

・

consumables other than those speciﬁed by DOCOMO is charged

even within the warranty period.

(Guide)” mounted on the FOMA terminal. (“

(Guide)” is available in Japanese mode only.) If the problem

使いか

Repairs may not be carried out in the following cases:



When exposure to water is found at our repair counter (Example:

・

When the waterproof sticker reacts) When, as a result of inspection at our repair center, corrosion is

・

found due to exposure to water, dew condensation, or sweat, or when damage or deformation is found in the circuit board [Repairs might not be carried out when damage to the connector terminal (earphone/ microphone terminal) or LCD, or cracks in the body are found.]

Even if repair is feasible, the repair cost is charged when the

※

trouble you suffer matches one of the symptoms listed above, which is not supported by the warranty.

After the warranty period



We will repair your FOMA terminal on request (charges will apply).

Spare parts availability period



The minimum storage period of the performance spare parts (parts required for maintaining performance) for the FOMA terminal is basically six years after the closure of its production. Note, however, that your FOMA terminal might not be repaired depending on the troubled portions because of the shortage of spare parts.

Other points to note



Make sure not to modify the FOMA terminal or its accessories.

⿠

We might reject to repair depending on the degrees of your

・

modiﬁcation. The following might be regarded as modiﬁcations:

To put stickers, etc. onto the liquid crystal display or keys

・

To decorate the FOMA terminal using adhesives

・

To replace the coverings etc. with those of other than

・

DOCOMO genuine products

Repairs of troubles or malfunctions resulting from the

・

modiﬁcations are charged even within the warranty period.

Do not peel the nameplate off the FOMA terminal.

⿠

Note that when we cannot ensure the contents described on the nameplate and therefore cannot verify the product conformity to the technical standard, it might happen that we at DOCOMO reject to repair the malfunction.

Page 85

The information such as about function settings and Total

⿠

Calls Duration, etc. might be reset depending on the troubles or repairs, or the way you handle the FOMA terminal. Set the settings again. The parts generating magnetism are used in the following

⿠

portions of the FOMA terminal. Note that if you place a magnetism-sensitive object such as a cash card near the FOMA terminal, the card might become unusable. Portions: speaker, earpiece If the FOMA terminal gets wet or becomes moist, immediately

⿠

turn off the power and remove the battery pack; then visit a repair counter. The FOMA terminal may not be repaired depending on the condition.

i-mode Fault Diagnosis Site

You can check on your FOMA terminal whether sending/receiving mail messages, downloading images/melodies, and others are normally working. When you think your FOMA terminal is in trouble as a result of your check, contact the “Repairs” counter listed on the back page of this manual.

To connect to “

⿠

ｉモード故障診断サイト

(i-mode Fault Diagnosis Site)” [in Japanese only] i-mode site:

→お知らせ →サービス・機能 →ｉモード

(i-mode)

(News)

(Services & Functions)

→ｉモード故障診断

Diagnosis) A packet communication fee for connecting to the

⿠

i-mode Fault Diagnosis Site is free. (When you access it from overseas, you are charged a fee.)

QR code for

accessing the site

(i-mode Fault

Others

Page 86

Updating Software

This function is for updating software programs in the FOMA terminal by using packet communication if necessary.

A packet communication fee for updating software programs is free.



The DOCOMO website and “ updating software programs. There are three methods for updating software programs; “Auto-update”, “Update Now” and “Reserve Update”. You can update software programs, with data retained, such as Phonebook entries, images shot by the camera, or

⿠

downloaded data in the FOMA terminal; however note that data may not be protected depending on the conditions (such as malfunction, damage, or drench) your FOMA terminal is placed in. You are advised to back up important data. Note that data such as downloaded ones might not be backed up. Before Using Software Update

■

Do not remove the battery pack while updating software programs. You may fail to update.

⿠

Fully charge the battery before updating software programs.

⿠

It may take time to update (download or rewrite) software programs.

⿠

You cannot make/receive calls, use communication functions, and other functions while updating software programs.

⿠

(You can receive voice calls during download.) You are advised to update software programs when radio wave is strong enough with the three antennas displayed and

⿠

while you are not moving. If radio wave conditions get worse while downloading software programs, or download is suspended, move to a place with better radio wave conditions and try again to update software programs. When updating software programs, the proprietary information about your FOMA terminal (model name or serial number,

⿠

etc.) is automatically sent to the server (DOCOMO-managed server for Software Update). We at DOCOMO never use the sent information for purposes other than to update software programs. If you fail to update software programs, “Rewrite failed” is displayed and you cannot do all operations. In that

⿠

case, you are kindly requested to come to a repair counter speciﬁed by DOCOMO.

Others

You cannot use Software Update overseas.

⿠



(User support)” in JapaneseiMenu lets you know information about

Page 87

Start Software Update from Icon

When update is necessary, “Update

■

Select “Update notiﬁ cation icon” on the

Stand-by display.

Update notiﬁ cation icon

Check whether you need to update software programs.

When update is necessary, “Update

is needed” is displayed. And you can select either “Now update” or “Reserve”.

⿠When you select “Now update”, update immediately starts. ⿠When rewriting is completed, your FOMA terminal automatically restarts and the Update Completion Conﬁ rmation display appears. ⿠When you select “Reserve”, you can select the date and time you want.

Start Software Update from Menu

■

from the Stand-by display

▶

Set./Service▶Other settings

▶

Software update

Enter your Terminal

Security Code

▶

Select “Update”.

Go to step 2 of “Start Software Update

from Icon” on page 85.

Others

Page 88

Check Harmful Data

About scanning function

You can detect data or application programs, which might cause troubles, from among those downloaded to your FOMA terminal, and then can delete the data or stop starting the application programs.

This scan function provides a certain protective measure to ﬁlter out data that might cause troubles with your FOMA terminal at the time

⿠

when you browse websites or receive messages. Note that when the virus pattern data supporting respective troubles is not yet downloaded to your FOMA terminal, or when no virus pattern data supporting them is found, this function is disabled to prevent troubles from occurring. The virus pattern data installed on the FOMA terminal differs in content by every model. Note that we at DOCOMO might stop to distribute

⿠

the virus pattern data for models on market for last three years since their release.

Update pattern data

First of all, update the pattern data to make it the latest.



from the Stand-by display

About displays for scanning results

About the display for scanned problem elements



The displays for scanning result



Alert level 0 Alert level 1 Alert level 2 Alert level 3 Alert level 4

OK .....Continues the

Others

operation.

▶

Set./Service▶Lock/Security▶Scanning function▶Update▶YES▶YES▶OK

A warning display appears when problematic data is found. Select “Detail” from the warning display to show the name of the problem element.

When six or more problem elements are found, the sixth and later problem element names are omitted.

⿠

“Detail” might not appear depending on the detected problem element.

⿠

YES ...Stops and ends

the operation.

..... Continues the

operation.

.....Stops and ends

the operation.

YES ...Deletes the data

and ends the operation.

..... Stops and ends

the operation.

.....Deletes the data

and ends the operation.

The alert displays for displaying i-mode mail mess

ages or SMS messages may differ from those at left.

Page 89

Introduction of Options and Related Devices

Combining various options with the FOMA terminal, you can realize more versatile use from personal purpose to business purposes. Some products may not be dealt in depending on the area. For details, consult a handling counter such as a docomo Shop. For details on options, refer to the user’s manuals of respective options and related devices.

Battery Pack P20

・

Back Cover P39

・

FOMA AC Adapter 01/02

・

FOMA AC Adapter 01 for Global use

・

FOMA DC Adapter 01/02

・

FOMA Portable Charging Adapter 01

・

FOMA Dry Battery Adapter 01

・

Desktop Holder P36

・

FOMA USB Cable with Charge Function 01/02

・

FOMA USB Cable

・

FOMA Indoor Booster Antenna

・

FOMA Indoor Booster Antenna (Stand Type)

・

Carry Case L 01

・

In-Car Holder 01

・

Flat-plug AV Output Cable P01

・

Earphone/Microphone 01

・

1 See page 19 for charging batteries using AC adapter.

※

2 If you use a USB hub, outer devices may not work correctly.

※

3 Use it in Japan only.

※

4 Earphone Plug Adapter for External connector terminal 01 is required.

※

5 Earphone Plug Adapter P001 and Earphone Plug Adapter for External connector terminal 01 are required.

※

6 AC Adapter for Bluetooth Headset F01 is required.

※

7 To charge the P-01B, FOMA In-Car Hands-Free Cable 01 is required.

※

Stereo Earphone Set 01

・

Earphone/Microphone with Switch P001/P002

・

Stereo Earphone Set P001

・

Flat-plug Earphone/Microphone with Switch P01/P02

・

Flat-plug Stereo Earphone Set P01

・

Earphone Plug Adapter P001

・

Earphone Plug Adapter for External connector terminal 01

・

Earphone Plug Adapter 01

・

Flat-plug Connector/Stereo Mini-jack Conversion Adapter P01

・

Bluetooth Headset F01

・

AC Adapter for Bluetooth Headset F01

・

Wireless Earphone Set P01/02

・

Bone conduction microphone/receiver 01

・

In-Car Hands-Free Kit 01

・

FOMA In-Car Hands-Free Cable 01

・

※

/02

※

Others

Page 90

Appendix

Function List

Execute “Reset settings” on page 39 for the items

Others

indicated by

Inbox

Mail

Outbox Draft Compose message Create new Decome-Anime

Template

Check new messages Compose SMS Check new SMS Receive option

Mail settings

, to return to the respective defaults.

Deco-mail Decome-Anime

Scroll Font size setting Mail list display Message display Mail security Secret mail display Auto color label Pred. conv. at reply Header/signature Set check new messages Auto-display Receiving display Receive option setting

Mail

Mail settings

SMS settings

Area Mail settings

Bookmark

i-mode

Screen memo

Last URL Enter URL

i-Channel

Post blog

i-mode settings

Attachment preference Auto-start attachment Address/Spam Mail set. Feel＊Mail Auto save setting Check settings SMS report request SMS validity period SMS input character SMS center setting Receive setting Beep time Manner/Public mode set Check ring tone Other menu

i-mode Browser Full Browser

Channel list Ticker ON/OFF Ticker font size set. Ticker color set. Ticker scroll speed Reset i-Channel

i-mode Browser set. Full Browser set.

Page 91

i-mode settings

i-mode

Full Browser Home

Software list (phone)

ppli

ppli (microSD)

ppli call logs

ppli info

ppli settings

About

ppli

Common settings Check settings Reset i-mode setting

Software list

ppli data

End stand-by info End Widget appli inf Security error history Auto start info Trace info Auto start setting Disp. software info i-Widget roaming set. i-Widget sound effect Prefer AUTO-GPS

ppli call settings

ppli volume

Preferred tone

Backlight

Power saver

Vibrator

Check settings

Sound

Set./Service

Display

Illumination

Select ring tone ( Ring volume ( Keypad sound ( Melody effect (

13)

50)

30)

64) Headset usage setting ( Mail/Msg. ring time (

Charge sound Display setting ( Backlight (

70)

56)

View blind Color theme setting (

Machi-chara Menu icon setting (

Horizontal open menu Private menu setting (

66)

63)

93)

Desktop icon ( Private window (

Font ( Font size setting Select language (

15) Recv. mail/call at open Image quality LCD AI

Icons (

36) All illum. setting Incoming illumination ( Illumination in talk Missed/unread illum. Music&Video Ch illum. Illum. when closed Hourly illumination

57)

68)

86)

51)

52)

Others

89)

Page 92

90)

75)

58)

76)

77)

65)

18)

17)

MUSIC illumination

Illumination

Set./Service

Kisekae i-concier Information disp. set.

Bluetooth illumination IC card illumination Check settings

Set./Service

Incoming call

Self mode Lock all Personal data lock IC card lock

40)

41)

Talk

Lock/Security

Secret mode ( Secret data only ( Secret recv. call Keypad dial lock Reject unknown Call setting w/o ID ( Change security code (

10)

29) UIM setting Scanning function

Call time/cost

Lock setting Call data (

61) Reset total cost&dura. ( Notice call cost CLR max cost icon Set time (

31)

60)

Videophone

Network setting

World time watch

Others

Clock

Incoming call

Summer time Auto power ON/OFF Alarm setting

Vibrator (

54)

Manner mode set (

NW services

20)

Answer setting ( Setting when opened Record display set Disp. PH-book image Set call/receive No. Ring time ( Info notice setting ( V.phone while packet Auto call/answer set. Melody Call setting Volume Setting when closed ( Hold tone setting Shikkari Talk Noise reduction ( Quality alarm ( Reconnect signal ( Visual preference Select image Hands-free w/ V.phone Voice call auto redial Remote monitoring Notify switchable mode Preﬁx setting Femtocell setting Caller ID notiﬁcation ( Voice mail Call waiting Call forwarding Nuis. call blocking Caller ID request

Page 93

Set./Service

NW services

Other settings

2in1 setting Multi number Arrival call act Set in-call arrival act Remote access Dual network English guidance Overseas NW search Overseas setting Overseas service Additional service Contact DOCOMO OFFICEED Chaku-moji Work with style Touchpad setting Side keys guard

long press

TV/録画

long press set. Character input method ( Battery Pause dial (

84) Sub-address setting Headset mic. setting Voice settings USB mode setting Check settings Reset settings (

23) Initialize Software update

35)

My picture (+m46) MUSIC Music&Video Channel

Data box

motion/Movie

Melody (

16) My documents Kisekae Tool Machi-chara Chara-den

1Seg

Document viewer Font SD other ﬁ les

Bar code reader

LifeKit

Receive Ir data (+m79)

microSD

Camera

Image Video Position memory

Scan code Saved data Receive Receive all Refer microSD data Backup/Restore Photo mode Movie mode View photos View movies

Others

Page 94

Others

LifeKit

Bluetooth

Map/GPS

Rec. msg/voice memo (

Voice recorder Pedometer

Data Security Service

Guide

i-concier

55)

Device list Register New Devices Activate Bluetooth/Bluetooth power OFF Accept registered Accept dialup devices Bluetooth settings Map imadoco search imadoco kantan search i-area Map/GPS αppli Position location Notify of location Location history AUTO-GPS GPS settings Play/Erase msg. Play/Erase VP msg. Record message setting Voice memo Voice announce

Check/How to update Exchanging history PB image sending Backup PB etc./update Backup set./update Backup images

Add to phonebook

Phonebook

Search phonebook

UIM operation

Dialed/recv. calls

(

24) Own number ( Group setting

Restrictions

Phonebook settings

(

26)

No. of phonebook

Phone UIM Reading? Group? Memory No.? Name? Phone number? Mail address? 2-touch dial? Copy Delete Dialed calls Received calls

Restrict dialing Call rejection Call acceptance Call forwarding Voice mail Font size setting Voice dial setting Mail group Forwarding image

Page 95

Alarm (+m44)

95)

45)

42)

85)

Schedule ( ToDo ( Text memo (

Stationery

Calculator ( Dictionary

Phrase/own dict.

(

38)

MUSIC Player

MUSIC

Music&Video Channel

Activate 1Seg Program guide

1Seg

TV timer list Timer recording list Recording result TVlink Channel list

Channel setting

User settings

Common phrases Own dictionary Download dictionary Create learned wd list

Select area Auto channel setting Display/operation Video Display light Sound effect Recording Data broadcasting ECO mode

1Seg

User settings

IC card content DCMX ToruCa

IC card lock set.

Osaifu-Keitai

Settings

Check IC owner Change IC owner Search by i-mode

Touchpad Redial

Others

Public mode (Drive mode) Manner mode Videophone Character input

Reset channel setting Reset storage area Reset TV settings Check TV settings

IC card lock IC lock (power-off) ToruCa from IC card Auto reading ToruCa Recv. ToruCa display ToruCa from 1Seg Check same ToruCa

Others

Page 96

Main Speciﬁcations

Handset



Model P-01B Dimensions (when closed) Height: Approx. 111 mm

Weight (with the battery pack attached)

Continuous standby time

FOMA/ 3G3G/GSM setting

[3G] 3G/GSM

setting [Auto]

GSM

3G/GSM setting [Auto]

Continuous

FOMA/3G Voice call :Approx. 190 minutes

talk time

GSM Voice call: Approx. 230 minutes

1Seg watching time Approx. 230 minutes

Charging time AC adapter: Approx. 120 minutes

LCD Type

Others

Size Display : Approx. 3.3 inches

Number of pixels Display:

Width: Approx. 50 mm Depth: Approx. 17.7 mm

(at thickest point: Approx. 19.4 mm)

Approx. 135 g

In motion: Approx. 340 hours

Standstill: Approx. 540 hours In motion: Approx. 330 hours

Standstill: Approx. 250 hours

Videophone call :Approx. 110 minutes

(when Mobile W-Speed is OFF: Approx. 290 minutes) (in ECO Mode: Approx. 340 minutes)

DC adapter: Approx. 120 minutes Display : TFT 262,144 colors

Private window : TFT 262,144 colors

Private window : Approx. 2.0 inches

409,920 pixels (480 dots x 854 dots)

Private window: 102,480 pixels

(427 dots x 240 dots)

Image pickup device

Type Inside camera : CMOS

Outside camera : CMOS

Size Inside camera : 1/10.0 inches

Outside camera : 1/3.2 inches

Camera Number of

effective pixels Number of recording

pixels (maximum)

Recording

Number of recordable still



images Number of still

images for continuous shooting

Music playback

Continuous playback time

Inside camera : Approx. 330,000 pixels Outside camera : Approx. 8,100,000 pixels

Inside camera : Approx. 310,000 pixels Outside camera : Approx. 8,000,000 pixels

Approx. 2,400 max. (default) Approx. 3,500 max.

(when the deletable

pre-installed data ﬁles are deleted) VGA: 4 QVGA: 5 through 10

QCIF: 5 through 20 Sub-QCIF: 5 through 20

SD-Audio ﬁle (supports Play Background):



Approx. 6,500 minutes

※

Chaku-uta Full® music file (supports Play Background): Approx. 6,000 minutes i-motion ﬁle (including Chaku-uta® music ﬁle): Approx. 540 minutes

※

WMA ﬁle (supports Play Background): Approx. 4,600 minutes Music&Video Channel program (supports Play Background) Sound : Approx. 6,000 minutes Moving picture : Approx. 240 minutes

Memory capacity

“Chaku-uta” is a registered trademark of Sony Music Entertainment Inc.

※ ※

Chaku-uta Chaku-uta Full

1: Image size: Sub-QCIF (128 x 96), Image quality: Normal, File size: 10 Kbytes 2: The continuous playback time is the estimated duration that you can play back

using the Stereo Earphone Set 01 (option) with the FOMA terminal closed. 3: File format: AAC 4: Shares with still images, i-motion ﬁles, melodies, PDF ﬁles, Music&Video Channel

programs, Kisekae Tool ﬁles, Machi-chara images, font ﬁles, ToruCa ﬁles, and

i-αppli programs.

Approx. 250 Mbytes

※

Page 97

Battery pack



Name of product Battery Pack P20 Battery type Li-ion (lithium ion) battery Voltage 3.7 V Capacity 800 mAh

Speciﬁcations of shooting



File format (Extension) JPEG (jpg) The number of ﬁles that can be

Approx. 3,500 max.

saved The number of ﬁles that can be

Approx. 3,870 max.

saved to the microSD card (64 Mbytes)

<Movie>

File format (Extension) MP4, ASF (3gp, asf) Recordable time Approx. 497 seconds max. Recordable time to the microSD

Approx. 137 minutes max.

※

card (64 Mbytes)

Photo Level of zoom 31 levels

The maximum

Approx. 12.7 times

magniﬁcations

Movie Level of zoom 31 levels

The maximum

Approx. 12.7 times

magniﬁcations

Maximum recording duration per shot that can be saved to the main unit

※

under the conditions of “Image size: Sub-QCIF (128 x 96)/File size setting: Mail restriction (L)/Image quality: Normal/Movie type set: Normal”.

2 Maximum recording duration per shot that can be saved to the microSD

※

card (64 Mbytes) under the conditions of “Image size: Sub-QCIF (128 x 96)/File size setting: Long time/Image quality: Normal/Movie type set: Normal”.

Recordable time of 1Seg



Maximum (total) recordable

Approx. 5,120 minutes

time to the microSDHC card (16 Gbytes)

The maximum recordable time is the estimate for 224 kbps of video, 48

⿠

kbps of audio, and 52 kbps of data (including captions). The recordable time varies depending on the broadcasting station or program. The maximum ﬁle size for continuous recording is up to 2 Gbytes under

⿠

SD-VIDEO speciﬁcations.

Number of savable/registerable items in FOMA Terminal



Function

Number of savable/registerable

items Phonebook 1,000 Schedule 2,500 Mail Received mail 2,500 max.

Sent mail 1,000 max.

※

i-motion ﬁle 3,500 max. Music&Video Channel

Downloaded program

Still image 3,500 max.

Saved program 10 max. Kisekae-Tool 3,500 max. i-αppli 100 max.

1 Includes pre-installed data.

※

2 The number of savable/registerable items may decrease depending on

※

the data volume.

※1※

※

Others

Page 98

Speciﬁc Absorption Rate (SAR) of Mobile Phone

SAR Certiﬁcation Information

■

This model phone P-01B meets the MIC’s* technical regulation for exposure to radio waves. The technical regulation established permitted levels of radio frequency energy, based on standards that were developed by independent scientiﬁc organizations through periodic and thorough evaluation of scientiﬁc studies. The regulation employs a unit of measurement known as the Speciﬁc Absorption Rate, or SAR. The SAR limit is 2 watts/kilogram (W/kg)** averaged over ten grams of tissue. The limit includes a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The value of the limit is equal to the international guidelines recommended by ICNIRP***. All phone models should be conﬁrmed to comply with the regulation, before they are available for sale to the public. The highest SAR value for this model phone is 0.976 W/kg. It was taken by the Telecom Engineering Center (TELEC), a Registered Certiﬁcation Agency on the Radio Law. The test for SAR was conducted in accordance with the MIC testing procedure using standard operating positions with the phone transmitting at its highest permitted power level in all tested frequency bands. While there may be differences between the SAR levels of various phones and at various positions, they all meet the MIC’s technical regulation.

Others

Although the SAR is determined at the highest certiﬁed power level, the actual SAR of the phone during operation can be well below the maximum value. For further information about SAR, please see the websites as shown on the right:

World Health Organization (WHO): http://www.who.int/peh-emf/ ICNIRP: http://www.icnirp.de/ MIC: http://www.tele.soumu.go.jp/e/index.htm TELEC: http://www.telec.or.jp/ENG/Index_e.htm NTT DOCOMO: http://www.nttdocomo.co.jp/english/product/sar/ Panasonic Mobile Communications Co., Ltd.: http://panasonic.jp/mobile/

* Ministry of Internal Affairs and Communications ** The technical regulation is provided in Article 14-2 of the Ministry

Ordinance Regulating Radio Equipment.

*** International Commission on Non-Ionizing Radiation Protection

European RF Exposure Information

■

This mobile phone complies with the EU requirements for exposure to radio waves. Your mobile phone is a radio transceiver, designed and manufactured not to exceed the SAR* limits** for exposure to radio-frequency (RF) energy, which SAR* value, when tested for compliance against the standard was 0.663 W/kg. While there may be differences between the SAR* levels of various phones and at various positions, they all meet*** the EU requirements for RF exposure.

* The exposure standard for mobile phones employs a unit of measurement

known as the Speciﬁc Absorption Rate, or SAR.

** The SAR limit for mobile phones used by the public is 2.0 watts/kilogram

(W/kg) averaged over ten grams of tissue, recommended by The Council of the European Union. The limit incorporates a substantial margin of safety to give additional protection for the public and to account for any variations in measurements.

*** Tests for SAR have been conducted using standard operating positions

with the phone transmitting at its highest certiﬁed power level in all tested frequency bands. Although the SAR is determined at the highest certiﬁed power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a base station antenna, the lower the power output.

(In Japanese only)

Page 99

Declaration of Conformity

■

The product “P-01B” is declared to conform with the essential requirements of European Union Directive 1999/5/EC Radio and Telecommunications Terminal Equipment Directive 3.1(a), 3.1(b) and 3.2. The Declaration of Conformity can be found on http://panasonic.net/pmc/support/index.html.

The European RTTE approval of this product is limited to the use of the P-01B

※

handset, Battery Pack and FOMA AC Adapter for Global use (100 to 240 V AC) only. Other accessories are not part of the approval.

FCC Notice

■

This device complies with part 15 of the FCC Rules.

⿠

Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference

that may cause undesired operation.

Changes or modiﬁcations not expressly approved by the manufacturer

⿠

responsible for compliance could void the user’s authority to operate the equipment.

FCC RF Exposure Information

■

This model phone meets the U.S. government’s requirements for exposure to radio waves.

Your wireless phone contains a radio transmitter and receiver. Your phone is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientiﬁc organizations through periodic and thorough evaluation of scientiﬁc studies. The exposure standard for wireless mobile phones employs a unit of measurement known as the Speciﬁc Absorption Rate (SAR). The SAR limit set by the FCC is 1.6 W/kg.* Tests for SAR are conducted using standard operating positions accepted by the FCC with the phone transmitting at its highest certiﬁed power level in all tested frequency bands. Although the SAR is determined at the highest certiﬁed power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the output. Before a phone model is available for sale to the public, it must be tested and certiﬁed to the FCC that it does not exceed the limit established by the U.S. government-adopted requirement for safe exposure. The tests are performed in various positions and locations (for example, at the ear and worn on the body) as required by FCC for each model. The highest SAR value for this model phone as reported to the FCC when tested for use at the ear is 0.627 W/kg, and when worn on the body in a holster or carry case, is 0.339 W/kg. (Body-worn measurements differ among phone models, depending upon available accessories and FCC requirements). While there may be differences between the SAR levels of various phones and at various positions, they all meet the U.S. government requirement. The FCC has granted an Equipment Authorization for this model phone with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model phone is on ﬁle with the FCC and can be found under the Display Grant section at http://www.fcc.gov/oet/ea/fccid/ after search on FCC ID UCE209021A. For body worn operation, this phone has been tested and meets the FCC RF exposure guidelines when used with an accessory designated for this product or when used with an accessory that contains no metal and that positions the handset a minimum of 1.5 cm from the body.

* In the United States, the SAR limit for wireless mobile phones used by the

public is 1.6 watts/kg (W/kg) averaged over one gram of tissue. SAR values may vary depending upon national reporting requirements and the network band.

Others

Page 100

Important Safety Information

■

AIRCRAFT

Switch off your wireless device when boarding an aircraft or whenever you are instructed to do so by airline staff. If your device offers a ‘ﬂight mode’ or similar feature consult airline staff as to whether it can be used on board.

DRIVING

Full attention should be given to driving at all times and local laws and regulations restricting the use of wireless devices while driving must be observed.

HOSPITALS

Mobile phones should be switched off wherever you are requested to do so in hospitals, clinics or health care facilities. These requests are designed to prevent possible interference with sensitive medical equipment.

PETROL STATIONS

Obey all posted signs with respect to the use of wireless devices or other radio equipment in locations with ﬂammable material and chemicals. Switch off your wireless device whenever you are instructed to do so by authorized staff.

INTERFERENCE

Care must be taken when using the phone in close proximity to personal medical devices, such as pacemakers and hearing aids.

Pacemakers

Pacemaker manufacturers recommend that a minimum separation of 15 cm be maintained between a mobile phone and a pacemaker to avoid potential interference with the pacemaker. To achieve this use the phone on the opposite ear to your pacemaker and do not carry it in a breast pocket.

Hearing Aids

Some digital wireless phones may interfere with some hearing aids. In the event of such interference, you may want to consult your hearing aid manufacturer to discuss alternatives.

For other Medical Devices:

Please consult your physician and the device manufacturer to determine if operation of your phone may interfere with the operation of your medical device.

Others

Export Administration Regulations

This product and its accessories might be covered by the Japan Export Administration Regulations (“Foreign Exchange and Foreign Trade Law” and its related laws). To export this product and its accessories, take the required measures on your responsibility and at your expenses. For details on the procedures, contact the Ministry of Economy, Trade and Industry.

Docomo P-01B, PRIME SERIES Instruction Manual

About operation explanation of P-01B

Contents

Introduction

FOMA Terminal

What You can Do With P-01B

Part Names and Functions

Styles

Precautions

Handling Precautions

Before Using

Basic Operation

Screen Explanation

Character Entry

Sound/Screen Setting

Lock/Security

Call Telephone

Connect

Mail

Phonebook

i-mode/Full Browser

Search

i-Channel

Map/ GPS

Camera

Enjoy

1Seg

Music

i-αppli

i-motion/ Movie

Osaifu-Keitai

More Convenient

i-concier

Convenient Tools

Data Management

Support

Others

Appendix